From 4f7cab49cecee16120d27c1734cfdf3d6c0e5329 Mon Sep 17 00:00:00 2001 From: Jerry Meng Date: Thu, 29 Jun 2023 17:35:22 +0800 Subject: [PATCH 01/24] USB: serial: option: support Quectel EM060K_128 EM060K_128 is EM060K's sub-model, having the same name "Quectel EM060K-GL" MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0128 Rev= 5.04 S: Manufacturer=Quectel S: Product=Quectel EM060K-GL S: SerialNumber=f6fa08b6 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jerry Meng Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 288a96a74266..a1600ec82f56 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -251,6 +251,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM061K_LTA 0x0123 #define QUECTEL_PRODUCT_EM061K_LMS 0x0124 #define QUECTEL_PRODUCT_EC25 0x0125 +#define QUECTEL_PRODUCT_EM060K_128 0x0128 #define QUECTEL_PRODUCT_EG91 0x0191 #define QUECTEL_PRODUCT_EG95 0x0195 #define QUECTEL_PRODUCT_BG96 0x0296 @@ -1197,6 +1198,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) }, From 857ea9005806e2a458016880278f98715873e977 Mon Sep 17 00:00:00 2001 From: Mohsen Tahmasebi Date: Mon, 10 Jul 2023 11:22:18 +0330 Subject: [PATCH 02/24] USB: serial: option: add Quectel EC200A module support Add Quectel EC200A "DIAG, AT, MODEM": 0x6005: ECM / RNDIS + DIAG + AT + MODEM T: Bus=01 Lev=01 Prnt=02 Port=05 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6005 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=0000 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms Signed-off-by: Mohsen Tahmasebi Tested-by: Mostafa Ghofrani Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a1600ec82f56..8ac98e60fff5 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -269,6 +269,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_RM520N 0x0801 #define QUECTEL_PRODUCT_EC200U 0x0901 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 +#define QUECTEL_PRODUCT_EC200A 0x6005 #define QUECTEL_PRODUCT_EM061K_LWW 0x6008 #define QUECTEL_PRODUCT_EM061K_LCN 0x6009 #define QUECTEL_PRODUCT_EC200T 0x6026 @@ -1229,6 +1230,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0900, 0xff, 0, 0), /* RM500U-CN */ .driver_info = ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200A, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200U, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, From dd92c8a1f99bcd166204ffc219ea5a23dd65d64f Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 12 Jul 2023 16:16:41 +0200 Subject: [PATCH 03/24] USB: serial: simple: add Kaufmann RKS+CAN VCP Add the device and product ID for this CAN bus interface / license dongle. The device is usable either directly from user space or can be attached to a kernel CAN interface with slcan_attach. Reported-by: Kaufmann Automotive GmbH Tested-by: Kaufmann Automotive GmbH Signed-off-by: Oliver Neukum [ johan: amend commit message and move entries in sort order ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/usb-serial-simple.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index 4c6747889a19..3c552e4b87ce 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -63,6 +63,11 @@ DEVICE(flashloader, FLASHLOADER_IDS); 0x01) } DEVICE(google, GOOGLE_IDS); +/* KAUFMANN RKS+CAN VCP */ +#define KAUFMANN_IDS() \ + { USB_DEVICE(0x16d0, 0x0870) } +DEVICE(kaufmann, KAUFMANN_IDS); + /* Libtransistor USB console */ #define LIBTRANSISTOR_IDS() \ { USB_DEVICE(0x1209, 0x8b00) } @@ -124,6 +129,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &funsoft_device, &flashloader_device, &google_device, + &kaufmann_device, &libtransistor_device, &vivopay_device, &moto_modem_device, @@ -142,6 +148,7 @@ static const struct usb_device_id id_table[] = { FUNSOFT_IDS(), FLASHLOADER_IDS(), GOOGLE_IDS(), + KAUFMANN_IDS(), LIBTRANSISTOR_IDS(), VIVOPAY_IDS(), MOTO_IDS(), From d245aedc00775c4d7265a9f4522cc4e1fd34d102 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 20 Jul 2023 09:53:57 +0200 Subject: [PATCH 04/24] USB: serial: simple: sort driver entries Sort the driver symbols alphabetically in order to make it more obvious where new driver entries should be added. Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/usb-serial-simple.c | 66 +++++++++++++------------- 1 file changed, 33 insertions(+), 33 deletions(-) diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index 3c552e4b87ce..24b8772a345e 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -38,16 +38,6 @@ static struct usb_serial_driver vendor##_device = { \ { USB_DEVICE(0x0a21, 0x8001) } /* MMT-7305WW */ DEVICE(carelink, CARELINK_IDS); -/* ZIO Motherboard USB driver */ -#define ZIO_IDS() \ - { USB_DEVICE(0x1CBE, 0x0103) } -DEVICE(zio, ZIO_IDS); - -/* Funsoft Serial USB driver */ -#define FUNSOFT_IDS() \ - { USB_DEVICE(0x1404, 0xcddc) } -DEVICE(funsoft, FUNSOFT_IDS); - /* Infineon Flashloader driver */ #define FLASHLOADER_IDS() \ { USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \ @@ -55,6 +45,11 @@ DEVICE(funsoft, FUNSOFT_IDS); { USB_DEVICE(0x8087, 0x0801) } DEVICE(flashloader, FLASHLOADER_IDS); +/* Funsoft Serial USB driver */ +#define FUNSOFT_IDS() \ + { USB_DEVICE(0x1404, 0xcddc) } +DEVICE(funsoft, FUNSOFT_IDS); + /* Google Serial USB SubClass */ #define GOOGLE_IDS() \ { USB_VENDOR_AND_INTERFACE_INFO(0x18d1, \ @@ -63,6 +58,11 @@ DEVICE(flashloader, FLASHLOADER_IDS); 0x01) } DEVICE(google, GOOGLE_IDS); +/* HP4x (48/49) Generic Serial driver */ +#define HP4X_IDS() \ + { USB_DEVICE(0x03f0, 0x0121) } +DEVICE(hp4x, HP4X_IDS); + /* KAUFMANN RKS+CAN VCP */ #define KAUFMANN_IDS() \ { USB_DEVICE(0x16d0, 0x0870) } @@ -73,11 +73,6 @@ DEVICE(kaufmann, KAUFMANN_IDS); { USB_DEVICE(0x1209, 0x8b00) } DEVICE(libtransistor, LIBTRANSISTOR_IDS); -/* ViVOpay USB Serial Driver */ -#define VIVOPAY_IDS() \ - { USB_DEVICE(0x1d5f, 0x1004) } /* ViVOpay 8800 */ -DEVICE(vivopay, VIVOPAY_IDS); - /* Motorola USB Phone driver */ #define MOTO_IDS() \ { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ \ @@ -106,10 +101,10 @@ DEVICE(nokia, NOKIA_IDS); { USB_DEVICE(0x09d7, 0x0100) } /* NovAtel FlexPack GPS */ DEVICE_N(novatel_gps, NOVATEL_IDS, 3); -/* HP4x (48/49) Generic Serial driver */ -#define HP4X_IDS() \ - { USB_DEVICE(0x03f0, 0x0121) } -DEVICE(hp4x, HP4X_IDS); +/* Siemens USB/MPI adapter */ +#define SIEMENS_IDS() \ + { USB_DEVICE(0x908, 0x0004) } +DEVICE(siemens_mpi, SIEMENS_IDS); /* Suunto ANT+ USB Driver */ #define SUUNTO_IDS() \ @@ -117,47 +112,52 @@ DEVICE(hp4x, HP4X_IDS); { USB_DEVICE(0x0fcf, 0x1009) } /* Dynastream ANT USB-m Stick */ DEVICE(suunto, SUUNTO_IDS); -/* Siemens USB/MPI adapter */ -#define SIEMENS_IDS() \ - { USB_DEVICE(0x908, 0x0004) } -DEVICE(siemens_mpi, SIEMENS_IDS); +/* ViVOpay USB Serial Driver */ +#define VIVOPAY_IDS() \ + { USB_DEVICE(0x1d5f, 0x1004) } /* ViVOpay 8800 */ +DEVICE(vivopay, VIVOPAY_IDS); + +/* ZIO Motherboard USB driver */ +#define ZIO_IDS() \ + { USB_DEVICE(0x1CBE, 0x0103) } +DEVICE(zio, ZIO_IDS); /* All of the above structures mushed into two lists */ static struct usb_serial_driver * const serial_drivers[] = { &carelink_device, - &zio_device, - &funsoft_device, &flashloader_device, + &funsoft_device, &google_device, + &hp4x_device, &kaufmann_device, &libtransistor_device, - &vivopay_device, &moto_modem_device, &motorola_tetra_device, &nokia_device, &novatel_gps_device, - &hp4x_device, - &suunto_device, &siemens_mpi_device, + &suunto_device, + &vivopay_device, + &zio_device, NULL }; static const struct usb_device_id id_table[] = { CARELINK_IDS(), - ZIO_IDS(), - FUNSOFT_IDS(), FLASHLOADER_IDS(), + FUNSOFT_IDS(), GOOGLE_IDS(), + HP4X_IDS(), KAUFMANN_IDS(), LIBTRANSISTOR_IDS(), - VIVOPAY_IDS(), MOTO_IDS(), MOTOROLA_TETRA_IDS(), NOKIA_IDS(), NOVATEL_IDS(), - HP4X_IDS(), - SUUNTO_IDS(), SIEMENS_IDS(), + SUUNTO_IDS(), + VIVOPAY_IDS(), + ZIO_IDS(), { }, }; MODULE_DEVICE_TABLE(usb, id_table); From c55afcbeaa7a6f4fffdbc999a9bf3f0b29a5186f Mon Sep 17 00:00:00 2001 From: Guiting Shen Date: Mon, 26 Jun 2023 23:27:13 +0800 Subject: [PATCH 05/24] usb: ohci-at91: Fix the unhandle interrupt when resume The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when suspend which will let the ohci_irq() skip the interrupt after resume. And nobody to handle this interrupt. According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset when resume from suspend(MEM) to fix by setting "hibernated" argument of ohci_resume(). Signed-off-by: Guiting Shen Cc: stable Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20230626152713.18950-1-aarongt.shen@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-at91.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index b9ce8d80f20b..b805c4b52ac3 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -672,7 +672,13 @@ ohci_hcd_at91_drv_resume(struct device *dev) else at91_start_clock(ohci_at91); - ohci_resume(hcd, false); + /* + * According to the comment in ohci_hcd_at91_drv_suspend() + * we need to do a reset if the 48Mhz clock was stopped, + * that is, if ohci_at91->wakeup is clear. Tell ohci_resume() + * to reset in this case by setting its "hibernated" flag. + */ + ohci_resume(hcd, !ohci_at91->wakeup); return 0; } From 71c47ad8920ef19d6545202191252a50c03aca30 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 26 Jun 2023 18:52:00 +0200 Subject: [PATCH 06/24] usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner() It's better to set TYPEC_STATE_SAFE mode from ucsi_unregister_partner() instead of ucsi_partner_change(), ucsi_unregister_partner() is always when the partner disconnects. Fixes: 25a2bc21c863 ("usb: typec: ucsi: call typec_set_mode on non-altmode partner change") Suggested-by: Heikki Krogerus Signed-off-by: Neil Armstrong Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20230626-topic-sm8550-usb-c-audio-fixup-v1-1-bc72fddf3f42@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index 9b6d6b14431f..f6901319639d 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -785,6 +785,8 @@ static void ucsi_unregister_partner(struct ucsi_connector *con) if (!con->partner) return; + typec_set_mode(con->port, TYPEC_STATE_SAFE); + ucsi_unregister_partner_pdos(con); ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP); typec_unregister_partner(con->partner); @@ -825,8 +827,6 @@ static void ucsi_partner_change(struct ucsi_connector *con) UCSI_CONSTAT_PARTNER_FLAG_USB) typec_set_mode(con->port, TYPEC_STATE_USB); } - } else { - typec_set_mode(con->port, TYPEC_STATE_SAFE); } /* Only notify USB controller if partner supports USB data */ From e835c0a4e23c38531dcee5ef77e8d1cf462658c7 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Wed, 28 Jun 2023 00:20:18 +0800 Subject: [PATCH 07/24] usb: dwc3: don't reset device side if dwc3 was configured as host-only Commit c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode") replaces check for HOST only dr_mode with current_dr_role. But during booting, the current_dr_role isn't initialized, thus the device side reset is always issued even if dwc3 was configured as host-only. What's more, on some platforms with host only dwc3, aways issuing device side reset by accessing device register block can cause kernel panic. Fixes: c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode") Cc: stable Signed-off-by: Jisheng Zhang Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20230627162018.739-1-jszhang@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index f6689b731718..e719e772f926 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -277,9 +277,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc) /* * We're resetting only the device side because, if we're in host mode, * XHCI driver will reset the host block. If dwc3 was configured for - * host-only mode, then we can return early. + * host-only mode or current role is host, then we can return early. */ - if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) + if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; reg = dwc3_readl(dwc->regs, DWC3_DCTL); From 57111552a5284533282199ba20d0e264f4ed28bc Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 12 Jul 2023 15:28:28 +0300 Subject: [PATCH 08/24] MAINTAINERS: drop invalid usb/cdns3 Reviewer e-mail Alternate working e-mail of this Reviewer not available so drop it do prevent unnecessary bounce backs. Signed-off-by: Roger Quadros Link: https://lore.kernel.org/r/20230712122828.17793-1-rogerq@kernel.org Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index d516295978a4..adc9c65d451e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4463,7 +4463,6 @@ CADENCE USB3 DRD IP DRIVER M: Peter Chen M: Pawel Laszczak R: Roger Quadros -R: Aswath Govindraju L: linux-usb@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git From 9fd10829a9eb482e192a845675ecc5480e0bfa10 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Wed, 19 Jul 2023 13:01:04 +0000 Subject: [PATCH 09/24] usb: xhci-mtk: set the dma max_seg_size Allow devices to have dma operations beyond 64K, and avoid warnings such as: DMA-API: xhci-mtk 11200000.usb: mapping sg segment longer than device claims to support [len=98304] [max=65536] Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller") Cc: stable Tested-by: Zubin Mithra Reported-by: Zubin Mithra Signed-off-by: Ricardo Ribalda Link: https://lore.kernel.org/r/20230628-mtk-usb-v2-1-c8c34eb9f229@chromium.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mtk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 51d9d4d4f6a5..bbdf1b0b7be1 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -586,6 +586,7 @@ static int xhci_mtk_probe(struct platform_device *pdev) } device_init_wakeup(dev, true); + dma_set_max_seg_size(dev, UINT_MAX); xhci = hcd_to_xhci(hcd); xhci->main_hcd = hcd; From 9dc162e22387080e2d06de708b89920c0e158c9a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C5=81ukasz=20Bartosik?= Date: Mon, 24 Jul 2023 13:29:11 +0200 Subject: [PATCH 10/24] USB: quirks: add quirk for Focusrite Scarlett MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Focusrite Scarlett audio device does not behave correctly during resumes. Below is what happens during every resume (captured with Beagle 5000): // The Scarlett disconnects and is enumerated again. However from time to time it drops completely off the USB bus during resume. Below is captured occurrence of such an event: // // To fix the condition a user has to unplug and plug the device again. With USB_QUIRK_RESET_RESUME applied ("usbcore.quirks=1235:8211:b") for the Scarlett audio device the issue still reproduces. Applying USB_QUIRK_DISCONNECT_SUSPEND ("usbcore.quirks=1235:8211:m") fixed the issue and the Scarlett audio device didn't drop off the USB bus for ~5000 suspend/resume cycles where originally issue reproduced in ~100 or less suspend/resume cycles. Signed-off-by: Łukasz Bartosik Cc: stable Link: https://lore.kernel.org/r/20230724112911.1802577-1-lb@semihalf.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 934b3d997702..15e9bd180a1d 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -436,6 +436,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* novation SoundControl XL */ { USB_DEVICE(0x1235, 0x0061), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Focusrite Scarlett Solo USB */ + { USB_DEVICE(0x1235, 0x8211), .driver_info = + USB_QUIRK_DISCONNECT_SUSPEND }, + /* Huawei 4G LTE module */ { USB_DEVICE(0x12d1, 0x15bb), .driver_info = USB_QUIRK_DISCONNECT_SUSPEND }, From 5bef4b3cb95a5b883dfec8b3ffc0d671323d55bb Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 13 Jul 2023 13:28:10 +0200 Subject: [PATCH 11/24] Revert "xhci: add quirk for host controllers that don't update endpoint DCS" This reverts commit 5255660b208aebfdb71d574f3952cf48392f4306. This quirk breaks at least the following hardware: 0b:00.0 0c03: 1106:3483 (rev 01) (prog-if 30 [XHCI]) Subsystem: 1106:3483 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Fixes: 5255660b208a ("xhci: add quirk for host controllers that don't update endpoint DCS") Cc: stable Link: https://lore.kernel.org/r/20230713112830.21773-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 4 +--- drivers/usb/host/xhci-ring.c | 25 +------------------------ 2 files changed, 2 insertions(+), 27 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c6742bae41c0..b9ae5c2a2527 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -479,10 +479,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x3432) xhci->quirks |= XHCI_BROKEN_STREAMS; - if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) xhci->quirks |= XHCI_LPM_SUPPORT; - xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS; - } if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) { diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 646ff125def5..1dde53f6eb31 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -626,11 +626,8 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci, struct xhci_ring *ep_ring; struct xhci_command *cmd; struct xhci_segment *new_seg; - struct xhci_segment *halted_seg = NULL; union xhci_trb *new_deq; int new_cycle; - union xhci_trb *halted_trb; - int index = 0; dma_addr_t addr; u64 hw_dequeue; bool cycle_found = false; @@ -668,27 +665,7 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci, hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id); new_seg = ep_ring->deq_seg; new_deq = ep_ring->dequeue; - - /* - * Quirk: xHC write-back of the DCS field in the hardware dequeue - * pointer is wrong - use the cycle state of the TRB pointed to by - * the dequeue pointer. - */ - if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS && - !(ep->ep_state & EP_HAS_STREAMS)) - halted_seg = trb_in_td(xhci, td->start_seg, - td->first_trb, td->last_trb, - hw_dequeue & ~0xf, false); - if (halted_seg) { - index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) / - sizeof(*halted_trb); - halted_trb = &halted_seg->trbs[index]; - new_cycle = halted_trb->generic.field[3] & 0x1; - xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n", - (u8)(hw_dequeue & 0x1), index, new_cycle); - } else { - new_cycle = hw_dequeue & 0x1; - } + new_cycle = hw_dequeue & 0x1; /* * We want to find the pointer, segment and cycle state of the new trb From 734ae15ab95a18d3d425fc9cb38b7a627d786f08 Mon Sep 17 00:00:00 2001 From: Jakub Vanek Date: Fri, 14 Jul 2023 14:24:19 +0200 Subject: [PATCH 12/24] Revert "usb: dwc3: core: Enable AutoRetry feature in the controller" This reverts commit b138e23d3dff90c0494925b4c1874227b81bddf7. AutoRetry has been found to sometimes cause controller freezes when communicating with buggy USB devices. This controller feature allows the controller in host mode to send non-terminating/burst retry ACKs instead of terminating retry ACKs to devices when a transaction error (CRC error or overflow) occurs. Unfortunately, if the USB device continues to respond with a CRC error, the controller will not complete endpoint-related commands while it keeps trying to auto-retry. [3] The xHCI driver will notice this once it tries to abort the transfer using a Stop Endpoint command and does not receive a completion in time. [1] This situation is reported to dmesg: [sda] tag#29 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN [sda] tag#29 CDB: opcode=0x28 28 00 00 69 42 80 00 00 48 00 xhci-hcd: xHCI host not responding to stop endpoint command xhci-hcd: xHCI host controller not responding, assume dead xhci-hcd: HC died; cleaning up Some users observed this problem on an Odroid HC2 with the JMS578 USB3-to-SATA bridge. The issue can be triggered by starting a read-heavy workload on an attached SSD. After a while, the host controller would die and the SSD would disappear from the system. [1] Further analysis by Synopsys determined that controller revisions other than the one in Odroid HC2 are also affected by this. The recommended solution was to disable AutoRetry altogether. This change does not have a noticeable performance impact. [2] Revert the enablement commit. This will keep the AutoRetry bit in the default state configured during SoC design [2]. Fixes: b138e23d3dff ("usb: dwc3: core: Enable AutoRetry feature in the controller") Link: https://lore.kernel.org/r/a21f34c04632d250cd0a78c7c6f4a1c9c7a43142.camel@gmail.com/ [1] Link: https://lore.kernel.org/r/20230711214834.kyr6ulync32d4ktk@synopsys.com/ [2] Link: https://lore.kernel.org/r/20230712225518.2smu7wse6djc7l5o@synopsys.com/ [3] Cc: stable@vger.kernel.org Cc: Mauro Ribeiro Cc: Krzysztof Kozlowski Suggested-by: Thinh Nguyen Signed-off-by: Jakub Vanek Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20230714122419.27741-1-linuxtardis@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 16 ---------------- drivers/usb/dwc3/core.h | 3 --- 2 files changed, 19 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index e719e772f926..9c6bf054f15d 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1209,22 +1209,6 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); } - if (dwc->dr_mode == USB_DR_MODE_HOST || - dwc->dr_mode == USB_DR_MODE_OTG) { - reg = dwc3_readl(dwc->regs, DWC3_GUCTL); - - /* - * Enable Auto retry Feature to make the controller operating in - * Host mode on seeing transaction errors(CRC errors or internal - * overrun scenerios) on IN transfers to reply to the device - * with a non-terminating retry ACK (i.e, an ACK transcation - * packet with Retry=1 & Nump != 0) - */ - reg |= DWC3_GUCTL_HSTINAUTORETRY; - - dwc3_writel(dwc->regs, DWC3_GUCTL, reg); - } - /* * Must config both number of packets and max burst settings to enable * RX and/or TX threshold. diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 8b1295e4dcdd..a69ac67d89fe 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -256,9 +256,6 @@ #define DWC3_GCTL_GBLHIBERNATIONEN BIT(1) #define DWC3_GCTL_DSBLCLKGTNG BIT(0) -/* Global User Control Register */ -#define DWC3_GUCTL_HSTINAUTORETRY BIT(14) - /* Global User Control 1 Register */ #define DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT BIT(31) #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28) From 6237390644fb92b81f5262877fe545d0d2c7b5d7 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Sat, 22 Jul 2023 00:22:56 +0200 Subject: [PATCH 13/24] usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate Commit 286d9975a838 ("usb: gadget: udc: core: Prevent soft_connect_store() race") introduced one extra mutex_unlock of connect_lock in the usb_gadget_active function. Fixes: 286d9975a838 ("usb: gadget: udc: core: Prevent soft_connect_store() race") Cc: stable Signed-off-by: Michael Grzeschik Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20230721222256.1743645-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 59188ea065e0..cd58f2a4e7f3 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -878,7 +878,6 @@ int usb_gadget_activate(struct usb_gadget *gadget) */ if (gadget->connected) ret = usb_gadget_connect_locked(gadget); - mutex_unlock(&gadget->udc->connect_lock); unlock: mutex_unlock(&gadget->udc->connect_lock); From 83e30f2bf86ef7c38fbd476ed81a88522b620628 Mon Sep 17 00:00:00 2001 From: Zqiang Date: Fri, 14 Jul 2023 15:40:11 +0800 Subject: [PATCH 14/24] USB: gadget: Fix the memory leak in raw_gadget driver Currently, increasing raw_dev->count happens before invoke the raw_queue_event(), if the raw_queue_event() return error, invoke raw_release() will not trigger the dev_free() to be called. [ 268.905865][ T5067] raw-gadget.0 gadget.0: failed to queue event [ 268.912053][ T5067] udc dummy_udc.0: failed to start USB Raw Gadget: -12 [ 268.918885][ T5067] raw-gadget.0: probe of gadget.0 failed with error -12 [ 268.925956][ T5067] UDC core: USB Raw Gadget: couldn't find an available UDC or it's busy [ 268.934657][ T5067] misc raw-gadget: fail, usb_gadget_register_driver returned -16 BUG: memory leak [] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076 [] kmalloc include/linux/slab.h:582 [inline] [] kzalloc include/linux/slab.h:703 [inline] [] dev_new drivers/usb/gadget/legacy/raw_gadget.c:191 [inline] [] raw_open+0x45/0x110 drivers/usb/gadget/legacy/raw_gadget.c:385 [] misc_open+0x1a9/0x1f0 drivers/char/misc.c:165 [] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076 [] kmalloc include/linux/slab.h:582 [inline] [] raw_ioctl_init+0xdf/0x410 drivers/usb/gadget/legacy/raw_gadget.c:460 [] raw_ioctl+0x5f9/0x1120 drivers/usb/gadget/legacy/raw_gadget.c:1250 [] vfs_ioctl fs/ioctl.c:51 [inline] [] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076 [] kmalloc include/linux/slab.h:582 [inline] [] kzalloc include/linux/slab.h:703 [inline] [] dummy_alloc_request+0x5a/0xe0 drivers/usb/gadget/udc/dummy_hcd.c:665 [] usb_ep_alloc_request+0x22/0xd0 drivers/usb/gadget/udc/core.c:196 [] gadget_bind+0x6d/0x370 drivers/usb/gadget/legacy/raw_gadget.c:292 This commit therefore invoke kref_get() under the condition that raw_queue_event() return success. Reported-by: syzbot+feb045d335c1fdde5bf7@syzkaller.appspotmail.com Cc: stable Closes: https://syzkaller.appspot.com/bug?extid=feb045d335c1fdde5bf7 Signed-off-by: Zqiang Reviewed-by: Andrey Konovalov Tested-by: Andrey Konovalov Link: https://lore.kernel.org/r/20230714074011.20989-1-qiang.zhang1211@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/legacy/raw_gadget.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/usb/gadget/legacy/raw_gadget.c b/drivers/usb/gadget/legacy/raw_gadget.c index 2acece16b890..e549022642e5 100644 --- a/drivers/usb/gadget/legacy/raw_gadget.c +++ b/drivers/usb/gadget/legacy/raw_gadget.c @@ -310,13 +310,15 @@ static int gadget_bind(struct usb_gadget *gadget, dev->eps_num = i; spin_unlock_irqrestore(&dev->lock, flags); + ret = raw_queue_event(dev, USB_RAW_EVENT_CONNECT, 0, NULL); + if (ret < 0) { + dev_err(&gadget->dev, "failed to queue event\n"); + set_gadget_data(gadget, NULL); + return ret; + } + /* Matches kref_put() in gadget_unbind(). */ kref_get(&dev->count); - - ret = raw_queue_event(dev, USB_RAW_EVENT_CONNECT, 0, NULL); - if (ret < 0) - dev_err(&gadget->dev, "failed to queue event\n"); - return ret; } From 288b4fa1798e3637a9304c6e90a93d900e02369c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 4 Jul 2023 17:08:27 +0300 Subject: [PATCH 15/24] Revert "usb: xhci: tegra: Fix error check" This reverts commit 18fc7c435be3f17ea26a21b2e2312fcb9088e01f. The reverted commit was based on static analysis and a misunderstanding of how PTR_ERR() and NULLs are supposed to work. When a function returns both pointer errors and NULL then normally the NULL means "continue operating without a feature because it was deliberately turned off". The NULL should not be treated as a failure. If a driver cannot work when that feature is disabled then the KConfig should enforce that the function cannot return NULL. We should not need to test for it. In this code, the patch means that certain tegra_xusb_probe() will fail if the firmware supports power-domains but CONFIG_PM is disabled. Signed-off-by: Dan Carpenter Fixes: 18fc7c435be3 ("usb: xhci: tegra: Fix error check") Cc: stable Link: https://lore.kernel.org/r/8baace8d-fb4b-41a4-ad5f-848ae643a23b@moroto.mountain Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-tegra.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 6ca8a37e53e1..4693d83351c6 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1145,15 +1145,15 @@ static int tegra_xusb_powerdomain_init(struct device *dev, int err; tegra->genpd_dev_host = dev_pm_domain_attach_by_name(dev, "xusb_host"); - if (IS_ERR_OR_NULL(tegra->genpd_dev_host)) { - err = PTR_ERR(tegra->genpd_dev_host) ? : -ENODATA; + if (IS_ERR(tegra->genpd_dev_host)) { + err = PTR_ERR(tegra->genpd_dev_host); dev_err(dev, "failed to get host pm-domain: %d\n", err); return err; } tegra->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "xusb_ss"); - if (IS_ERR_OR_NULL(tegra->genpd_dev_ss)) { - err = PTR_ERR(tegra->genpd_dev_ss) ? : -ENODATA; + if (IS_ERR(tegra->genpd_dev_ss)) { + err = PTR_ERR(tegra->genpd_dev_ss); dev_err(dev, "failed to get superspeed pm-domain: %d\n", err); return err; } From a8291be6b5dd465c22af229483dbac543a91e24e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 4 Jul 2023 17:09:09 +0300 Subject: [PATCH 16/24] Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()" This reverts commit f08aa7c80dac27ee00fa6827f447597d2fba5465. The reverted commit was based on static analysis and a misunderstanding of how PTR_ERR() and NULLs are supposed to work. When a function returns both pointer errors and NULL then normally the NULL means "continue operating without a feature because it was deliberately turned off". The NULL should not be treated as a failure. If a driver cannot work when that feature is disabled then the KConfig should enforce that the function cannot return NULL. We should not need to test for it. In this driver, the bug means that probe cannot succeed when CONFIG_PM is disabled. Signed-off-by: Dan Carpenter Fixes: f08aa7c80dac ("usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()") Cc: stable Link: https://lore.kernel.org/r/ZKQoBa84U/ykEh3C@moroto Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/tegra-xudc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c index 83eaa65ddde3..df6028f7b273 100644 --- a/drivers/usb/gadget/udc/tegra-xudc.c +++ b/drivers/usb/gadget/udc/tegra-xudc.c @@ -3718,15 +3718,15 @@ static int tegra_xudc_powerdomain_init(struct tegra_xudc *xudc) int err; xudc->genpd_dev_device = dev_pm_domain_attach_by_name(dev, "dev"); - if (IS_ERR_OR_NULL(xudc->genpd_dev_device)) { - err = PTR_ERR(xudc->genpd_dev_device) ? : -ENODATA; + if (IS_ERR(xudc->genpd_dev_device)) { + err = PTR_ERR(xudc->genpd_dev_device); dev_err(dev, "failed to get device power domain: %d\n", err); return err; } xudc->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "ss"); - if (IS_ERR_OR_NULL(xudc->genpd_dev_ss)) { - err = PTR_ERR(xudc->genpd_dev_ss) ? : -ENODATA; + if (IS_ERR(xudc->genpd_dev_ss)) { + err = PTR_ERR(xudc->genpd_dev_ss); dev_err(dev, "failed to get SuperSpeed power domain: %d\n", err); return err; } From da6d91ed77062960107e2eddacd932abecfd0592 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Tue, 25 Jul 2023 20:53:19 +0800 Subject: [PATCH 17/24] usb: typec: qcom: fix return value check in qcom_pmic_typec_probe() device_get_named_child_node() returns NULL, if it fails, replace IS_ERR() with NULL pointer check. Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver") Signed-off-by: Yang Yingliang Acked-by: Konrad Dybcio Acked-by: Bryan O'Donoghue Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20230725125319.565733-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c index a905160dd860..9b467a346114 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c @@ -209,8 +209,8 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev) platform_set_drvdata(pdev, tcpm); tcpm->tcpc.fwnode = device_get_named_child_node(tcpm->dev, "connector"); - if (IS_ERR(tcpm->tcpc.fwnode)) - return PTR_ERR(tcpm->tcpc.fwnode); + if (!tcpm->tcpc.fwnode) + return -EINVAL; tcpm->tcpm_port = tcpm_register_port(tcpm->dev, &tcpm->tcpc); if (IS_ERR(tcpm->tcpm_port)) { From b33ebb2415e7e0a55ee3d049c2890d3a3e3805b6 Mon Sep 17 00:00:00 2001 From: Kyle Tso Date: Fri, 23 Jun 2023 23:10:34 +0800 Subject: [PATCH 18/24] usb: typec: Set port->pd before adding device for typec_port When calling device_add in the registration of typec_port, it will do the NULL check on usb_power_delivery handle in typec_port for the visibility of the device attributes. It is always NULL because port->pd is set in typec_port_set_usb_power_delivery which is later than the device_add call. Set port->pd before device_add and only link the device after that. Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners") Cc: stable@vger.kernel.org Signed-off-by: Kyle Tso Acked-by: Heikki Krogerus Link: https://lore.kernel.org/r/20230623151036.3955013-2-kyletso@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/class.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index faa184ae3dac..3b30948bf4b0 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -2288,6 +2288,8 @@ struct typec_port *typec_register_port(struct device *parent, return ERR_PTR(ret); } + port->pd = cap->pd; + ret = device_add(&port->dev); if (ret) { dev_err(parent, "failed to register port (%d)\n", ret); @@ -2295,7 +2297,7 @@ struct typec_port *typec_register_port(struct device *parent, return ERR_PTR(ret); } - ret = typec_port_set_usb_power_delivery(port, cap->pd); + ret = usb_power_delivery_link_device(port->pd, &port->dev); if (ret) { dev_err(&port->dev, "failed to link pd\n"); device_unregister(&port->dev); From 4b642dc9829507e4afabc03d32a18abbdb192c5e Mon Sep 17 00:00:00 2001 From: Kyle Tso Date: Fri, 23 Jun 2023 23:10:35 +0800 Subject: [PATCH 19/24] usb: typec: Iterate pds array when showing the pd list The pointers of each usb_power_delivery handles are stored in "pds" array returned from the pd_get ops but not in the adjacent memory calculated from "pd". Get the handles from "pds" array directly instead of deriving them from "pd". Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners") Cc: stable@vger.kernel.org Signed-off-by: Kyle Tso Acked-by: Heikki Krogerus Link: https://lore.kernel.org/r/20230623151036.3955013-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/class.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 3b30948bf4b0..e7312295f8c9 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -1277,8 +1277,7 @@ static ssize_t select_usb_power_delivery_show(struct device *dev, { struct typec_port *port = to_typec_port(dev); struct usb_power_delivery **pds; - struct usb_power_delivery *pd; - int ret = 0; + int i, ret = 0; if (!port->ops || !port->ops->pd_get) return -EOPNOTSUPP; @@ -1287,11 +1286,11 @@ static ssize_t select_usb_power_delivery_show(struct device *dev, if (!pds) return 0; - for (pd = pds[0]; pd; pd++) { - if (pd == port->pd) - ret += sysfs_emit(buf + ret, "[%s] ", dev_name(&pd->dev)); + for (i = 0; pds[i]; i++) { + if (pds[i] == port->pd) + ret += sysfs_emit(buf + ret, "[%s] ", dev_name(&pds[i]->dev)); else - ret += sysfs_emit(buf + ret, "%s ", dev_name(&pd->dev)); + ret += sysfs_emit(buf + ret, "%s ", dev_name(&pds[i]->dev)); } buf[ret - 1] = '\n'; From 609fded3f91972ada551c141c5d04a71704f8967 Mon Sep 17 00:00:00 2001 From: Kyle Tso Date: Fri, 23 Jun 2023 23:10:36 +0800 Subject: [PATCH 20/24] usb: typec: Use sysfs_emit_at when concatenating the string The buffer address used in sysfs_emit should be aligned to PAGE_SIZE. Use sysfs_emit_at instead to offset the buffer. Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners") Cc: stable@vger.kernel.org Signed-off-by: Kyle Tso Acked-by: Heikki Krogerus Link: https://lore.kernel.org/r/20230623151036.3955013-4-kyletso@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/class.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index e7312295f8c9..9c1dbf3c00e0 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -1288,9 +1288,9 @@ static ssize_t select_usb_power_delivery_show(struct device *dev, for (i = 0; pds[i]; i++) { if (pds[i] == port->pd) - ret += sysfs_emit(buf + ret, "[%s] ", dev_name(&pds[i]->dev)); + ret += sysfs_emit_at(buf, ret, "[%s] ", dev_name(&pds[i]->dev)); else - ret += sysfs_emit(buf + ret, "%s ", dev_name(&pds[i]->dev)); + ret += sysfs_emit_at(buf, ret, "%s ", dev_name(&pds[i]->dev)); } buf[ret - 1] = '\n'; From f4fc01af5b640bc39bd9403b5fd855345a2ad5f8 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Fri, 7 Jul 2023 19:00:14 -0400 Subject: [PATCH 21/24] usb: gadget: call usb_gadget_check_config() to verify UDC capability The legacy gadget driver omitted calling usb_gadget_check_config() to ensure that the USB device controller (UDC) has adequate resources, including sufficient endpoint numbers and types, to support the given configuration. Previously, usb_add_config() was solely invoked by the legacy gadget driver. Adds the necessary usb_gadget_check_config() after the bind() operation to fix the issue. Fixes: dce49449e04f ("usb: cdns3: allocate TX FIFO size according to composite EP number") Cc: stable Reported-by: Ravi Gunasekaran Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20230707230015.494999-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 1b3489149e5e..dd9b90481b4c 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1125,6 +1125,10 @@ int usb_add_config(struct usb_composite_dev *cdev, goto done; status = bind(config); + + if (status == 0) + status = usb_gadget_check_config(cdev->gadget); + if (status < 0) { while (!list_empty(&config->functions)) { struct usb_function *f; From 2627335a1329a0d39d8d277994678571c4f21800 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Fri, 7 Jul 2023 19:00:15 -0400 Subject: [PATCH 22/24] usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config Previously, the cdns3_gadget_check_config() function in the cdns3 driver mistakenly calculated the ep_buf_size by considering only one configuration's endpoint information because "claimed" will be clear after call usb_gadget_check_config(). The fix involves checking the private flags EP_CLAIMED instead of relying on the "claimed" flag. Fixes: dce49449e04f ("usb: cdns3: allocate TX FIFO size according to composite EP number") Cc: stable Reported-by: Ravi Gunasekaran Signed-off-by: Frank Li Acked-by: Peter Chen Tested-by: Ravi Gunasekaran Link: https://lore.kernel.org/r/20230707230015.494999-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/cdns3/cdns3-gadget.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index ea19253fd2d0..aa0111b365bb 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -3015,12 +3015,14 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) static int cdns3_gadget_check_config(struct usb_gadget *gadget) { struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + struct cdns3_endpoint *priv_ep; struct usb_ep *ep; int n_in = 0; int total; list_for_each_entry(ep, &gadget->ep_list, ep_list) { - if (ep->claimed && (ep->address & USB_DIR_IN)) + priv_ep = ep_to_cdns3_ep(ep); + if ((priv_ep->flags & EP_CLAIMED) && (ep->address & USB_DIR_IN)) n_in++; } From b32b8f2b9542d8039f5468303a6ca78c1b5611a5 Mon Sep 17 00:00:00 2001 From: Gratian Crisan Date: Wed, 26 Jul 2023 13:45:56 -0500 Subject: [PATCH 23/24] usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy Hardware based on the Bay Trail / BYT SoCs require an external ULPI phy for USB device-mode. The phy chip usually has its 'reset' and 'chip select' lines connected to GPIOs described by ACPI fwnodes in the DSDT table. Because of hardware with missing ACPI resources for the 'reset' and 'chip select' GPIOs commit 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") introduced a fallback gpiod_lookup_table with hard-coded mappings for Bay Trail devices. However there are existing Bay Trail based devices, like the National Instruments cRIO-903x series, where the phy chip has its 'reset' and 'chip-select' lines always asserted in hardware via resistor pull-ups. On this hardware the phy chip is always enabled and the ACPI dsdt table is missing information not only for the 'chip-select' and 'reset' lines but also for the BYT GPIO controller itself "INT33FC". With the introduction of the gpiod_lookup_table initializing the USB device-mode on these hardware now errors out. The error comes from the gpiod_get_optional() calls in dwc3_pci_quirks() which will now return an -ENOENT error due to the missing ACPI entry for the INT33FC gpio controller used in the aforementioned table. This hardware used to work before because gpiod_get_optional() will return NULL instead of -ENOENT if no GPIO has been assigned to the requested function. The dwc3_pci_quirks() code for setting the 'cs' and 'reset' GPIOs was then skipped (due to the NULL return). This is the correct behavior in cases where the phy chip is hardwired and there are no GPIOs to control. Since the gpiod_lookup_table relies on the presence of INT33FC fwnode in ACPI tables only add the table if we know the entry for the INT33FC gpio controller is present. This allows Bay Trail based devices with hardwired dwc3 ULPI phys to continue working. Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") Cc: stable Signed-off-by: Gratian Crisan Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20230726184555.218091-2-gratian.crisan@ni.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-pci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 44a04c9b2073..6604845c397c 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -233,10 +233,12 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc, /* * A lot of BYT devices lack ACPI resource entries for - * the GPIOs, add a fallback mapping to the reference + * the GPIOs. If the ACPI entry for the GPIO controller + * is present add a fallback mapping to the reference * design GPIOs which all boards seem to use. */ - gpiod_add_lookup_table(&platform_bytcr_gpios); + if (acpi_dev_present("INT33FC", NULL, -1)) + gpiod_add_lookup_table(&platform_bytcr_gpios); /* * These GPIOs will turn on the USB2 PHY. Note that we have to From 7f2327666a9080e428166964e37548b0168cd5e9 Mon Sep 17 00:00:00 2001 From: Xu Yang Date: Wed, 5 Jul 2023 17:52:31 +0800 Subject: [PATCH 24/24] usb: misc: ehset: fix wrong if condition A negative number from ret means the host controller had failed to send usb message and 0 means succeed. Therefore, the if logic is wrong here and this patch will fix it. Fixes: f2b42379c576 ("usb: misc: ehset: Rework test mode entry") Cc: stable Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20230705095231.457860-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/ehset.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c index 986d6589f053..36b6e9fa7ffb 100644 --- a/drivers/usb/misc/ehset.c +++ b/drivers/usb/misc/ehset.c @@ -77,7 +77,7 @@ static int ehset_probe(struct usb_interface *intf, switch (test_pid) { case TEST_SE0_NAK_PID: ret = ehset_prepare_port_for_testing(hub_udev, portnum); - if (!ret) + if (ret < 0) break; ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE, USB_RT_PORT, USB_PORT_FEAT_TEST, @@ -86,7 +86,7 @@ static int ehset_probe(struct usb_interface *intf, break; case TEST_J_PID: ret = ehset_prepare_port_for_testing(hub_udev, portnum); - if (!ret) + if (ret < 0) break; ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE, USB_RT_PORT, USB_PORT_FEAT_TEST, @@ -95,7 +95,7 @@ static int ehset_probe(struct usb_interface *intf, break; case TEST_K_PID: ret = ehset_prepare_port_for_testing(hub_udev, portnum); - if (!ret) + if (ret < 0) break; ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE, USB_RT_PORT, USB_PORT_FEAT_TEST, @@ -104,7 +104,7 @@ static int ehset_probe(struct usb_interface *intf, break; case TEST_PACKET_PID: ret = ehset_prepare_port_for_testing(hub_udev, portnum); - if (!ret) + if (ret < 0) break; ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE, USB_RT_PORT, USB_PORT_FEAT_TEST,