diff --git a/src/cache/cache.sv b/src/cache/cache.sv
index bea04a4d7..de3b8d711 100644
--- a/src/cache/cache.sv
+++ b/src/cache/cache.sv
@@ -39,7 +39,7 @@ module cache #(parameter LINELEN,  NUMLINES,  NUMWAYS, LOGBWPL, WORDLEN, MUXINTE
   input  logic [1:0]             CacheAtomic,       // Atomic operation
   input  logic                   FlushCache,        // Flush all dirty lines back to memory
   input  logic                   InvalidateCache,   // Clear all valid bits
-  input  logic [11:0]            NextAdr,           // Virtual address, but we only use the lower 12 bits.
+  input  logic [11:0]            NextSet,           // Virtual address, but we only use the lower 12 bits.
   input  logic [`PA_BITS-1:0]    PAdr,              // Physical address
   input  logic [(WORDLEN-1)/8:0] ByteMask,          // Which bytes to write (D$ only)
   input  logic [WORDLEN-1:0]     CacheWriteData,    // Data to write to cache (D$ only)
@@ -50,7 +50,7 @@ module cache #(parameter LINELEN,  NUMLINES,  NUMWAYS, LOGBWPL, WORDLEN, MUXINTE
   output logic                   CacheMiss,         // Cache miss
   output logic                   CacheAccess,       // Cache access
   // lsu control
-  input  logic                   SelHPTW,           // Use PAdr from Hardware Page Table Walker rather than NextAdr
+  input  logic                   SelHPTW,           // Use PAdr from Hardware Page Table Walker rather than NextSet
   // Bus fsm interface
   input  logic                   CacheBusAck,       // Bus operation completed
   input  logic                   SelBusBeat,        // Word in cache line comes from BeatCount
@@ -106,12 +106,12 @@ module cache #(parameter LINELEN,  NUMLINES,  NUMWAYS, LOGBWPL, WORDLEN, MUXINTE
   // Read Path
   /////////////////////////////////////////////////////////////////////////////////////////////
 
-  // Choose read address (CacheSet).  Normally use NextAdr, but use PAdr during stalls
+  // Choose read address (CacheSet).  Normally use NextSet, but use PAdr during stalls
   // and FlushAdr when handling D$ flushes
   // The icache must update to the newest PCNextF on flush as it is probably a trap.  Trap
   // sets PCNextF to XTVEC and the icache must start reading the instruction.
   assign AdrSelMuxSel = {SelFlush, ((SelAdr | SelHPTW) & ~((READ_ONLY_CACHE == 1) & FlushStage))};
-  mux3 #(SETLEN) AdrSelMux(NextAdr[SETTOP-1:OFFSETLEN], PAdr[SETTOP-1:OFFSETLEN], FlushAdr,
+  mux3 #(SETLEN) AdrSelMux(NextSet[SETTOP-1:OFFSETLEN], PAdr[SETTOP-1:OFFSETLEN], FlushAdr,
     AdrSelMuxSel, CacheSet);
 
   // Array of cache ways, along with victim, hit, dirty, and read merging logic
diff --git a/src/ifu/ifu.sv b/src/ifu/ifu.sv
index d1d468aed..d8d48cbf4 100644
--- a/src/ifu/ifu.sv
+++ b/src/ifu/ifu.sv
@@ -245,7 +245,7 @@ module ifu (
              .CacheWriteData('0),
              .CacheRW(CacheRWF), 
              .CacheAtomic('0), .FlushCache('0),
-             .NextAdr(PCSpillNextF[11:0]),
+             .NextSet(PCSpillNextF[11:0]),
              .PAdr(PCPF),
              .CacheCommitted(CacheCommittedF), .InvalidateCache(InvalidateICacheM));
       ahbcacheinterface #(WORDSPERLINE, LOGBWPL, LINELEN, LLENPOVERAHBW) 
diff --git a/src/lsu/lsu.sv b/src/lsu/lsu.sv
index 4a53801b2..628c85bbd 100644
--- a/src/lsu/lsu.sv
+++ b/src/lsu/lsu.sv
@@ -266,7 +266,7 @@ module lsu (
       cache #(.LINELEN(`DCACHE_LINELENINBITS), .NUMLINES(`DCACHE_WAYSIZEINBYTES*8/LINELEN),
               .NUMWAYS(`DCACHE_NUMWAYS), .LOGBWPL(LLENLOGBWPL), .WORDLEN(`LLEN), .MUXINTERVAL(`LLEN), .READ_ONLY_CACHE(0)) dcache(
         .clk, .reset, .Stall(GatedStallW), .SelBusBeat, .FlushStage(FlushW), .CacheRW(CacheRWM), .CacheAtomic(CacheAtomicM),
-        .FlushCache(FlushDCache), .NextAdr(IEUAdrE[11:0]), .PAdr(PAdrM), 
+        .FlushCache(FlushDCache), .NextSet(IEUAdrE[11:0]), .PAdr(PAdrM), 
         .ByteMask(ByteMaskM), .BeatCount(BeatCount[AHBWLOGBWPL-1:AHBWLOGBWPL-LLENLOGBWPL]),
         .CacheWriteData(LSUWriteDataM), .SelHPTW,
         .CacheStall(DCacheStallM), .CacheMiss(DCacheMiss), .CacheAccess(DCacheAccess),