#!/bin/bash

# Copyright © 2019-2023
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# exit when any command fails
set -e

# clear blackbox cache
rm -f blackbox.*.cache

# HW: add a test "VM Test" to make sure VM feature is enabled

XLEN=${XLEN:=@XLEN@}

XSIZE=$((XLEN / 8))

echo "Vortex Regression Test: XLEN=$XLEN"

unittest()
{
    make -C tests/unittest run
    make -C hw/unittest > /dev/null
}

isa()
{
    echo "begin isa tests..."

    make -C sim/simx
    make -C sim/rtlsim

    make -C tests/riscv/isa run-simx
    make -C tests/riscv/isa run-rtlsim

    make -C sim/rtlsim clean && CONFIGS="-DFPU_FPNEW" make -C sim/rtlsim > /dev/null && make -C tests/riscv/isa run-rtlsim-32f

    make -C sim/rtlsim clean && CONFIGS="-DFPU_DPI" make -C sim/rtlsim > /dev/null && make -C tests/riscv/isa run-rtlsim-32f

    make -C sim/rtlsim clean && CONFIGS="-DFPU_DSP" make -C sim/rtlsim > /dev/null && make -C tests/riscv/isa run-rtlsim-32f

    if [ "$XLEN" == "64" ]
    then
        make -C sim/rtlsim clean && CONFIGS="-DFPU_FPNEW" make -C sim/rtlsim > /dev/null && make -C tests/riscv/isa run-rtlsim-64d

        make -C sim/rtlsim clean && CONFIGS="-DFPU_DPI" make -C sim/rtlsim > /dev/null && make -C tests/riscv/isa run-rtlsim-64d

        make -C sim/rtlsim clean && CONFIGS="-DFPU_DPI -DEXT_D_DISABLE" make -C sim/rtlsim > /dev/null && make -C tests/riscv/isa run-rtlsim-64f

        make -C sim/rtlsim clean && CONFIGS="-DFPU_FPNEW -DEXT_D_DISABLE" make -C sim/rtlsim > /dev/null && make -C tests/riscv/isa run-rtlsim-64f

        make -C sim/rtlsim clean && CONFIGS="-DFPU_DSP -DEXT_D_DISABLE" make -C sim/rtlsim > /dev/null && make -C tests/riscv/isa run-rtlsim-64fx
    fi

    # clean build
    make -C sim/rtlsim clean

    echo "isa tests done!"
}

kernel()
{
    echo "begin kernel tests..."

    make -C sim/simx
    make -C sim/rtlsim

    make -C tests/kernel run-simx
    make -C tests/kernel run-rtlsim

    echo "kernel tests done!"
}

regression()
{
    echo "begin regression tests..."

    make -C runtime/simx
    make -C runtime/rtlsim

    make -C tests/regression run-simx
    make -C tests/regression run-rtlsim

    # test global barrier
    CONFIGS="-DGBAR_ENABLE" ./ci/blackbox.sh --driver=simx --app=dogfood --args="-n1 -tgbar" --cores=2
    CONFIGS="-DGBAR_ENABLE" ./ci/blackbox.sh --driver=opae --app=dogfood --args="-n1 -tgbar" --cores=2
    CONFIGS="-DGBAR_ENABLE" ./ci/blackbox.sh --driver=xrt --app=dogfood --args="-n1 -tgbar" --cores=2

    # test local barrier
    ./ci/blackbox.sh --driver=simx --app=dogfood --args="-n1 -tbar"
    ./ci/blackbox.sh --driver=opae --app=dogfood --args="-n1 -tbar"
    ./ci/blackbox.sh --driver=xrt --app=dogfood --args="-n1 -tbar"

    # test temp driver mode for
    ./ci/blackbox.sh --driver=simx --app=vecadd --rebuild=3

    # test for matmul
    CONFIGS="-DTC_NUM=4 -DTC_SIZE=8" ./ci/blackbox.sh --cores=4 --app=matmul --driver=simx --threads=32 --warps=32 --args="-n128 -d1"

    echo "regression tests done!"
}

opencl()
{
    echo "begin opencl tests..."

    make -C runtime/simx
    make -C runtime/rtlsim

    make -C tests/opencl run-simx
    make -C tests/opencl run-rtlsim

    ./ci/blackbox.sh --driver=simx --app=lbm --warps=8
    ./ci/blackbox.sh --driver=rtlsim --app=lbm --warps=8

    echo "opencl tests done!"
}

vm(){
    echo "begin vm tests..."

    make -C sim/simx clean && CONFIGS="-DVM_ENABLE" make -C sim/simx
    make -C runtime/simx clean && CONFIGS="-DVM_ENABLE" make -C runtime/simx
    make -C tests/opencl run-simx
    make -C tests/regression run-simx

    make -C sim/simx clean && CONFIGS="-DVM_ENABLE -DVM_ADDR_MODE=BARE" make -C sim/simx
    make -C runtime/simx clean && CONFIGS="-DVM_ENABLE -DVM_ADDR_MODE=BARE" make -C runtime/simx
    make -C tests/opencl run-simx
    make -C tests/regression run-simx

    echo "vm tests done!"
}

cache()
{
    echo "begin cache tests..."

    # disable local memory
    CONFIGS="-DLMEM_DISABLE" ./ci/blackbox.sh --driver=rtlsim --app=demo --perf=1
    CONFIGS="-DLMEM_DISABLE" ./ci/blackbox.sh --driver=simx --app=demo --perf=1

    # disable L1 cache
    CONFIGS="-DL1_DISABLE -DLMEM_DISABLE" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx
    CONFIGS="-DL1_DISABLE" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx
    CONFIGS="-DDCACHE_DISABLE" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx
    CONFIGS="-DICACHE_DISABLE" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx

    # reduce l1 line size
    CONFIGS="-DL1_LINE_SIZE=$XSIZE" ./ci/blackbox.sh --driver=rtlsim --app=io_addr
    CONFIGS="-DL1_LINE_SIZE=$XSIZE -DDISABLE_L1" ./ci/blackbox.sh --driver=rtlsim --app=io_addr
    CONFIGS="-DL1_LINE_SIZE=$XSIZE" ./ci/blackbox.sh --driver=simx --app=io_addr
    CONFIGS="-DL1_LINE_SIZE=$XSIZE -DLMEM_DISABLE" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx
    CONFIGS="-DL1_LINE_SIZE=$XSIZE -DLMEM_DISABLE" ./ci/blackbox.sh --driver=simx --app=sgemmx

    # test cache ways
    CONFIGS="-DICACHE_NUM_WAYS=1 -DDCACHE_NUM_WAYS=1" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx
    CONFIGS="-DICACHE_NUM_WAYS=4 -DDCACHE_NUM_WAYS=8" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx
    CONFIGS="-DICACHE_NUM_WAYS=4 -DDCACHE_NUM_WAYS=8" ./ci/blackbox.sh --driver=simx --app=sgemmx

    # test cache banking
    CONFIGS="-DMEM_BLOCK_SIZE=8 -DLMEM_NUM_BANKS=4 -DDCACHE_NUM_BANKS=1" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx
    CONFIGS="-DMEM_BLOCK_SIZE=8 -DLMEM_NUM_BANKS=4 -DDCACHE_NUM_BANKS=1" ./ci/blackbox.sh --driver=simx --app=sgemmx
    CONFIGS="-DMEM_BLOCK_SIZE=8 -DLMEM_NUM_BANKS=2 -DDCACHE_NUM_BANKS=4" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx --threads=8
    CONFIGS="-DMEM_BLOCK_SIZE=8 -DLMEM_NUM_BANKS=2 -DDCACHE_NUM_BANKS=4" ./ci/blackbox.sh --driver=simx --app=sgemmx --threads=8

    # replacement policy
    CONFIGS="-DDCACHE_REPL_POLICY=0" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx
    CONFIGS="-DDCACHE_REPL_POLICY=1" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx
    CONFIGS="-DDCACHE_REPL_POLICY=2" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx

    # test writeback
    CONFIGS="-DDCACHE_WRITEBACK=1 -DDCACHE_DIRTYBYTES=0 -DDCACHE_NUM_WAYS=4" ./ci/blackbox.sh --driver=rtlsim --app=mstress
    CONFIGS="-DDCACHE_WRITEBACK=1 -DDCACHE_DIRTYBYTES=1 -DDCACHE_NUM_WAYS=4" ./ci/blackbox.sh --driver=rtlsim --app=mstress
    CONFIGS="-DDCACHE_WRITEBACK=1 -DDCACHE_NUM_WAYS=4" ./ci/blackbox.sh --driver=simx --app=mstress
    CONFIGS="-DSOCKET_SIZE=1 -DL2_WRITEBACK=1 -DL3_WRITEBACK=1" ./ci/blackbox.sh --driver=rtlsim --cores=2 --clusters=2 --l2cache --l3cache --app=mstress
    CONFIGS="-DSOCKET_SIZE=1 -DL2_WRITEBACK=1 -DL3_WRITEBACK=1" ./ci/blackbox.sh --driver=simx --cores=2 --clusters=2 --l2cache --l3cache --app=mstress

    # cache clustering
    CONFIGS="-DSOCKET_SIZE=4 -DNUM_DCACHES=4 -DNUM_ICACHES=2" ./ci/blackbox.sh --driver=rtlsim --app=sgemmx --cores=4 --warps=1 --threads=2

    # L2/L3
    CONFIGS="-DSOCKET_SIZE=1" ./ci/blackbox.sh --driver=rtlsim --cores=4 --l2cache --app=diverge --args="-n1"
    CONFIGS="-DSOCKET_SIZE=1" ./ci/blackbox.sh --driver=simx --cores=4 --l2cache --app=diverge --args="-n1"
    CONFIGS="-DSOCKET_SIZE=1" ./ci/blackbox.sh --driver=rtlsim --cores=2 --clusters=2 --l2cache --l3cache --app=diverge --args="-n1"
    CONFIGS="-DSOCKET_SIZE=1" ./ci/blackbox.sh --driver=simx --cores=2 --clusters=2 --l2cache --l3cache --app=diverge --args="-n1"

    echo "begin cache tests..."
}

config1()
{
    echo "begin configuration-1 tests..."

    # warp/threads
    ./ci/blackbox.sh --driver=rtlsim --warps=1 --threads=1 --app=diverge
    ./ci/blackbox.sh --driver=rtlsim --warps=2 --threads=2 --app=diverge
    ./ci/blackbox.sh --driver=rtlsim --warps=2 --threads=8 --app=diverge
    ./ci/blackbox.sh --driver=rtlsim --warps=8 --threads=2 --app=diverge
    ./ci/blackbox.sh --driver=simx --warps=1 --threads=1 --app=diverge
    ./ci/blackbox.sh --driver=simx --warps=8 --threads=16 --app=diverge

    # cores clustering
    ./ci/blackbox.sh --driver=rtlsim --cores=4 --app=diverge --args="-n1"
    ./ci/blackbox.sh --driver=simx --cores=4 --app=diverge --args="-n1"
    ./ci/blackbox.sh --driver=rtlsim --cores=2 --clusters=2 --app=diverge --args="-n1"
    ./ci/blackbox.sh --driver=simx --cores=2 --clusters=2 --app=diverge --args="-n1"
    CONFIGS="-DSOCKET_SIZE=1" ./ci/blackbox.sh --driver=rtlsim --cores=2 --clusters=2 --app=diverge --args="-n1"
    CONFIGS="-DSOCKET_SIZE=1" ./ci/blackbox.sh --driver=simx --cores=2 --clusters=2 --app=diverge --args="-n1"

    # issue width
    CONFIGS="-DISSUE_WIDTH=2" ./ci/blackbox.sh --driver=rtlsim --app=diverge
    CONFIGS="-DISSUE_WIDTH=4" ./ci/blackbox.sh --driver=rtlsim --app=diverge
    CONFIGS="-DISSUE_WIDTH=2" ./ci/blackbox.sh --driver=simx --app=diverge
    CONFIGS="-DISSUE_WIDTH=4" ./ci/blackbox.sh --driver=simx --app=diverge

    # ALU scaling
    CONFIGS="-DISSUE_WIDTH=2 -DNUM_ALU_BLOCK=1 -DNUM_ALU_LANES=2" ./ci/blackbox.sh --driver=rtlsim --app=diverge
    CONFIGS="-DISSUE_WIDTH=4 -DNUM_ALU_BLOCK=4 -DNUM_ALU_LANES=4" ./ci/blackbox.sh --driver=rtlsim --app=diverge
    CONFIGS="-DISSUE_WIDTH=2 -DNUM_ALU_BLOCK=1 -DNUM_ALU_LANES=2" ./ci/blackbox.sh --driver=simx --app=diverge
    CONFIGS="-DISSUE_WIDTH=4 -DNUM_ALU_BLOCK=4 -DNUM_ALU_LANES=4" ./ci/blackbox.sh --driver=simx --app=diverge

    # FPU scaling
    CONFIGS="-DISSUE_WIDTH=2 -DNUM_FPU_BLOCK=1 -DNUM_FPU_LANES=2" ./ci/blackbox.sh --driver=rtlsim --app=vecaddx
    CONFIGS="-DISSUE_WIDTH=4 -DNUM_FPU_BLOCK=4 -DNUM_FPU_LANES=4" ./ci/blackbox.sh --driver=rtlsim --app=vecaddx
    CONFIGS="-DISSUE_WIDTH=2 -DNUM_FPU_BLOCK=1 -DNUM_FPU_LANES=2" ./ci/blackbox.sh --driver=simx --app=vecaddx
    CONFIGS="-DISSUE_WIDTH=4 -DNUM_FPU_BLOCK=4 -DNUM_FPU_LANES=4" ./ci/blackbox.sh --driver=simx --app=vecaddx

    # FPU's PE scaling
    CONFIGS="-DFMA_PE_RATIO=2" ./ci/blackbox.sh --driver=rtlsim --app=dogfood --args="-tfmadd"
    CONFIGS="-DFCVT_PE_RATIO=2" ./ci/blackbox.sh --driver=rtlsim --app=dogfood --args="-tftoi"
    CONFIGS="-DFDIV_PE_RATIO=2" ./ci/blackbox.sh --driver=rtlsim --app=dogfood --args="-tfdiv"
    CONFIGS="-DFSQRT_PE_RATIO=2" ./ci/blackbox.sh --driver=rtlsim --app=dogfood --args="-tfsqrt"
    CONFIGS="-DFNCP_PE_RATIO=2" ./ci/blackbox.sh --driver=rtlsim --app=dogfood --args="-tfclamp"

    # LSU scaling
    CONFIGS="-DISSUE_WIDTH=2 -DNUM_LSU_BLOCK=1 -DNUM_LSU_LANES=2" ./ci/blackbox.sh --driver=rtlsim --app=vecaddx
    CONFIGS="-DISSUE_WIDTH=4 -DNUM_LSU_BLOCK=4 -DNUM_LSU_LANES=4" ./ci/blackbox.sh --driver=rtlsim --app=vecaddx
    CONFIGS="-DISSUE_WIDTH=2 -DNUM_LSU_BLOCK=1 -DNUM_LSU_LANES=2" ./ci/blackbox.sh --driver=simx --app=vecaddx
    CONFIGS="-DISSUE_WIDTH=4 -DNUM_LSU_BLOCK=4 -DNUM_LSU_LANES=4" ./ci/blackbox.sh --driver=simx --app=vecaddx

    echo "configuration-1 tests done!"
}

config2()
{
    echo "begin configuration-2 tests..."

    # test opaesim
    ./ci/blackbox.sh --driver=opae --app=printf
    ./ci/blackbox.sh --driver=opae --app=diverge
    ./ci/blackbox.sh --driver=xrt --app=diverge

    # disable DPI
    if [ "$XLEN" == "64" ]; then
        # need to disable trig on 64-bit due to a bug inside fpnew's sqrt core.
        CONFIGS="-DDPI_DISABLE -DFPU_FPNEW" ./ci/blackbox.sh --driver=rtlsim --app=dogfood --args="-xtrig -xbar -xgbar"
        CONFIGS="-DDPI_DISABLE -DFPU_FPNEW" ./ci/blackbox.sh --driver=opae --app=dogfood --args="-xtrig -xbar -xgbar"
        CONFIGS="-DDPI_DISABLE -DFPU_FPNEW" ./ci/blackbox.sh --driver=xrt --app=dogfood --args="-xtrig -xbar -xgbar"
    else
        CONFIGS="-DDPI_DISABLE -DFPU_FPNEW" ./ci/blackbox.sh --driver=rtlsim --app=dogfood
        CONFIGS="-DDPI_DISABLE -DFPU_FPNEW" ./ci/blackbox.sh --driver=opae --app=dogfood
        CONFIGS="-DDPI_DISABLE -DFPU_FPNEW" ./ci/blackbox.sh --driver=xrt --app=dogfood
    fi

    # custom program startup address
    make -C tests/regression/dogfood clean-kernel
    STARTUP_ADDR=0x80000000 make -C tests/regression/dogfood
    ./ci/blackbox.sh --driver=simx --app=dogfood
    ./ci/blackbox.sh --driver=rtlsim --app=dogfood
    make -C tests/regression/dogfood clean-kernel

    # disabling M & F extensions
    make -C sim/rtlsim clean && CONFIGS="-DEXT_M_DISABLE -DEXT_F_DISABLE" make -C sim/rtlsim > /dev/null && make -C tests/riscv/isa run-rtlsim-32i
    make -C sim/rtlsim clean

    # disabling ZICOND extension
    CONFIGS="-DEXT_ZICOND_DISABLE" ./ci/blackbox.sh --driver=rtlsim --app=demo

    # test 128-bit memory block
    CONFIGS="-DMEM_BLOCK_SIZE=16" ./ci/blackbox.sh --driver=opae --app=mstress
    CONFIGS="-DMEM_BLOCK_SIZE=16" ./ci/blackbox.sh --driver=xrt --app=mstress

    # test XLEN-bit memory block
    CONFIGS="-DMEM_BLOCK_SIZE=$XSIZE" ./ci/blackbox.sh --driver=opae --app=mstress
    CONFIGS="-DMEM_BLOCK_SIZE=$XSIZE" ./ci/blackbox.sh --driver=simx --app=mstress

    # test memory coalescing
    CONFIGS="-DMEM_BLOCK_SIZE=16" ./ci/blackbox.sh --driver=rtlsim --app=mstress --threads=8
    CONFIGS="-DMEM_BLOCK_SIZE=16" ./ci/blackbox.sh --driver=simx --app=mstress --threads=8

    # test single-bank memory
    if [ "$XLEN" == "64" ]; then
        CONFIGS="-DPLATFORM_MEMORY_NUM_BANKS=1" ./ci/blackbox.sh --driver=opae --app=mstress
        CONFIGS="-DPLATFORM_MEMORY_NUM_BANKS=1" ./ci/blackbox.sh --driver=xrt --app=mstress
    else
        CONFIGS="-DPLATFORM_MEMORY_NUM_BANKS=1" ./ci/blackbox.sh --driver=opae --app=mstress
        CONFIGS="-DPLATFORM_MEMORY_NUM_BANKS=1" ./ci/blackbox.sh --driver=xrt --app=mstress
    fi

    # test larger memory address
    if [ "$XLEN" == "64" ]; then
        CONFIGS="-DPLATFORM_MEMORY_ADDR_WIDTH=49" ./ci/blackbox.sh --driver=opae --app=mstress
        CONFIGS="-DPLATFORM_MEMORY_ADDR_WIDTH=49" ./ci/blackbox.sh --driver=xrt --app=mstress
    else
        CONFIGS="-DPLATFORM_MEMORY_ADDR_WIDTH=33" ./ci/blackbox.sh --driver=opae --app=mstress
        CONFIGS="-DPLATFORM_MEMORY_ADDR_WIDTH=33" ./ci/blackbox.sh --driver=xrt --app=mstress
    fi

    # test memory banks interleaving
    CONFIGS="-DPLATFORM_MEMORY_INTERLEAVE=1" ./ci/blackbox.sh --driver=opae --app=mstress
    CONFIGS="-DPLATFORM_MEMORY_INTERLEAVE=0" ./ci/blackbox.sh --driver=opae --app=mstress

    # test memory ports
    CONFIGS="-DMEM_BLOCK_SIZE=8 -DPLATFORM_MEMORY_NUM_BANKS=2" ./ci/blackbox.sh --driver=simx --app=mstress
    CONFIGS="-DMEM_BLOCK_SIZE=8 -DPLATFORM_MEMORY_NUM_BANKS=2" ./ci/blackbox.sh --driver=simx --app=mstress --threads=8
    CONFIGS="-DMEM_BLOCK_SIZE=8 -DPLATFORM_MEMORY_NUM_BANKS=2" ./ci/blackbox.sh --driver=rtlsim --app=mstress
    CONFIGS="-DMEM_BLOCK_SIZE=8 -DPLATFORM_MEMORY_NUM_BANKS=2" ./ci/blackbox.sh --driver=rtlsim --app=mstress --threads=8
    CONFIGS="-DMEM_BLOCK_SIZE=8" ./ci/blackbox.sh --driver=opae --app=mstress --threads=8
    CONFIGS="-DMEM_BLOCK_SIZE=8" ./ci/blackbox.sh --driver=xrt --app=mstress --threads=8

    echo "configuration-2 tests done!"
}

test_csv_trace()
{
    # test CSV trace generation
    make -C sim/simx clean && DEBUG=3 make -C sim/simx > /dev/null
    make -C sim/rtlsim clean && DEBUG=3 CONFIGS="-DGPR_RESET" make -C sim/rtlsim > /dev/null
    make -C tests/riscv/isa run-simx-32im > run_simx.log
    make -C tests/riscv/isa run-rtlsim-32im > run_rtlsim.log
    ./ci/trace_csv.py -tsimx run_simx.log -otrace_simx.csv
    ./ci/trace_csv.py -trtlsim run_rtlsim.log -otrace_rtlsim.csv
    diff trace_rtlsim.csv trace_simx.csv
    # clean build
    make -C sim/simx clean
    make -C sim/rtlsim clean
}

debug()
{
    echo "begin debugging tests..."

    test_csv_trace

    CONFIGS="-O0" ./ci/blackbox.sh --driver=opae --app=demo --args="-n1"
    CONFIGS="-O0" ./ci/blackbox.sh --driver=xrt --app=demo --args="-n1"
    CONFIGS="-DSOCKET_SIZE=1" ./ci/blackbox.sh --driver=opae --cores=2 --clusters=2 --l2cache --debug=1 --perf=1 --app=demo --args="-n1"
    CONFIGS="-DSOCKET_SIZE=1" ./ci/blackbox.sh --driver=xrt --cores=2 --clusters=2 --l2cache --debug=1 --perf=1 --app=demo --args="-n1"
    CONFIGS="-DSOCKET_SIZE=1" ./ci/blackbox.sh --driver=simx --cores=2 --clusters=2 --l2cache --debug=1 --perf=1 --app=demo --args="-n1"

    echo "debugging tests done!"
}

scope()
{
    echo "begin scope tests..."

    SCOPE_DEPTH=128 ./ci/blackbox.sh --driver=opae --app=demo --args="-n1" --scope
    SCOPE_DEPTH=128 ./ci/blackbox.sh --driver=xrt --app=demo --args="-n1" --scope

    echo "debugging scope done!"
}

stress()
{
    echo "begin stress tests..."

    # test verilator reset values
    CONFIGS="-DVERILATOR_RESET_VALUE=1 -DSOCKET_SIZE=1 -DDCACHE_WRITEBACK=1 -DL2_WRITEBACK=1 -DL3_WRITEBACK=1" ./ci/blackbox.sh --driver=opae --cores=2 --clusters=2 --l2cache --l3cache --app=dogfood
    CONFIGS="-DVERILATOR_RESET_VALUE=1" ./ci/blackbox.sh --driver=xrt --app=sgemmx --args="-n128" --l2cache

    echo "stress tests done!"
}

synthesis()
{
    echo "begin synthesis tests..."

    PREFIX=build_base make -C hw/syn/yosys clean
    PREFIX=build_base CONFIGS="-DDPI_DISABLE -DEXT_F_DISABLE -DNUM_WARPS=2 -DNUM_THREADS=2" make -C hw/syn/yosys synthesis

    echo "synthesis tests done!"
}

vector()
{
    echo "begin vector tests..."

    make -C sim/simx clean && CONFIGS="-DEXT_V_ENABLE" make -C sim/simx
    TOOLDIR=@TOOLDIR@ XLEN=@XLEN@ VLEN=256 REG_TESTS=1 ./tests/riscv/riscv-vector-tests/run-test.sh

    echo "vector tests done!"
}

show_usage()
{
    echo "Vortex Regression Test"
    echo "Usage: $0 [--clean] [--unittest] [--isa] [--kernel] [--regression] [--opencl] [--cache] [--config1] [--config2] [--debug] [--scope] [--stress] [--synthesis] [--vector] [--all] [--h|--help]"
}

declare -a tests=()
clean=0

while [ "$1" != "" ]; do
    case $1 in
        --clean )
                clean=1
                ;;
        --unittest )
                tests+=("unittest")
                ;;
        --isa )
                tests+=("isa")
                ;;
        --kernel )
                tests+=("kernel")
                ;;
        --regression )
                tests+=("regression")
                ;;
        --opencl )
                tests+=("opencl")
                ;;
        --cache )
                tests+=("cache")
                ;;
        --vm )
                tests+=("vm")
                ;;
        --config1 )
                tests+=("config1")
                ;;
        --config2 )
                tests+=("config2")
                ;;
        --debug )
                tests+=("debug")
                ;;
        --scope )
                tests+=("scope")
                ;;
        --stress )
                tests+=("stress")
                ;;
        --synthesis )
                tests+=("synthesis")
                ;;
        --vector )
                tests+=("vector")
                ;;
        --all )
                tests=()
                tests+=("unittest")
                tests+=("isa")
                tests+=("kernel")
                tests+=("regression")
                tests+=("opencl")
                tests+=("cache")
                tests+=("vm")
                tests+=("config1")
                tests+=("config2")
                tests+=("debug")
                tests+=("scope")
                tests+=("stress")
                tests+=("synthesis")
                tests+=("vector")
                ;;
        -h | --help )
                show_usage
                exit
                ;;
        * )
                show_usage
                exit 1
    esac
    shift
done

if [ $clean -eq 1 ];
then
    make clean
    make -s
fi

start=$SECONDS

for test in "${tests[@]}"; do
    $test
done

echo "Regression completed!"

duration=$(( SECONDS - start ))
awk -v t=$duration 'BEGIN{t=int(t*1000); printf "Elapsed Time: %d:%02d:%02d\n", t/3600000, t/60000%60, t/1000%60}'