net: Add tests for bonding and team address list management

Test that the bonding and team drivers clean up an underlying device's
address lists (dev->uc, dev->mc) when the aggregated device is deleted.

Test addition and removal of the LACPDU multicast address on underlying
devices by the bonding driver.

v2:
* add lag_lib.sh to TEST_FILES

v3:
* extend bond_listen_lacpdu_multicast test to init_state up and down cases
* remove some superfluous shell syntax and 'set dev ... up' commands

Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -19948,6 +19948,7 @@ S:	Supported
 F:	drivers/net/team/
 F:	include/linux/if_team.h
 F:	include/uapi/linux/if_team.h
+F:	tools/testing/selftests/net/team/
 
 TECHNOLOGIC SYSTEMS TS-5500 PLATFORM SUPPORT
 M:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>

tools/testing/selftests/Makefile

@@ -13,6 +13,7 @@ TARGETS += damon
 TARGETS += drivers/dma-buf
 TARGETS += drivers/s390x/uvdevice
 TARGETS += drivers/net/bonding
+TARGETS += drivers/net/team
 TARGETS += efivarfs
 TARGETS += exec
 TARGETS += filesystems

tools/testing/selftests/drivers/net/bonding/Makefile

@@ -1,6 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for net selftests
 
-TEST_PROGS := bond-break-lacpdu-tx.sh
+TEST_PROGS := bond-break-lacpdu-tx.sh \
+	      dev_addr_lists.sh
+
+TEST_FILES := lag_lib.sh
 
 include ../../../lib.mk

tools/testing/selftests/drivers/net/bonding/config

@@ -1 +1,2 @@
 CONFIG_BONDING=y
+CONFIG_MACVLAN=y

tools/testing/selftests/drivers/net/bonding/dev_addr_lists.sh

@@ -0,0 +1,109 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test bond device handling of addr lists (dev->uc, mc)
+#
+
+ALL_TESTS="
+	bond_cleanup_mode1
+	bond_cleanup_mode4
+	bond_listen_lacpdu_multicast_case_down
+	bond_listen_lacpdu_multicast_case_up
+"
+
+REQUIRE_MZ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
+
+source "$lib_dir"/lag_lib.sh
+
+
+destroy()
+{
+	local ifnames=(dummy1 dummy2 bond1 mv0)
+	local ifname
+
+	for ifname in "${ifnames[@]}"; do
+		ip link del "$ifname" &>/dev/null
+	done
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	destroy
+}
+
+
+# bond driver control paths vary between modes that have a primary slave
+# (bond_uses_primary()) and others. Test both kinds of modes.
+
+bond_cleanup_mode1()
+{
+	RET=0
+
+	test_LAG_cleanup "bonding" "active-backup"
+}
+
+bond_cleanup_mode4() {
+	RET=0
+
+	test_LAG_cleanup "bonding" "802.3ad"
+}
+
+bond_listen_lacpdu_multicast()
+{
+	# Initial state of bond device, up | down
+	local init_state=$1
+	local lacpdu_mc="01:80:c2:00:00:02"
+
+	ip link add dummy1 type dummy
+	ip link add bond1 "$init_state" type bond mode 802.3ad
+	ip link set dev dummy1 master bond1
+	if [ "$init_state" = "down" ]; then
+		ip link set dev bond1 up
+	fi
+
+	grep_bridge_fdb "$lacpdu_mc" bridge fdb show brport dummy1 >/dev/null
+	check_err $? "LACPDU multicast address not present on slave (1)"
+
+	ip link set dev bond1 down
+
+	not grep_bridge_fdb "$lacpdu_mc" bridge fdb show brport dummy1 >/dev/null
+	check_err $? "LACPDU multicast address still present on slave"
+
+	ip link set dev bond1 up
+
+	grep_bridge_fdb "$lacpdu_mc" bridge fdb show brport dummy1 >/dev/null
+	check_err $? "LACPDU multicast address not present on slave (2)"
+
+	cleanup
+
+	log_test "bonding LACPDU multicast address to slave (from bond $init_state)"
+}
+
+# The LACPDU mc addr is added by different paths depending on the initial state
+# of the bond when enslaving a device. Test both cases.
+
+bond_listen_lacpdu_multicast_case_down()
+{
+	RET=0
+
+	bond_listen_lacpdu_multicast "down"
+}
+
+bond_listen_lacpdu_multicast_case_up()
+{
+	RET=0
+
+	bond_listen_lacpdu_multicast "up"
+}
+
+
+trap cleanup EXIT
+
+tests_run
+
+exit "$EXIT_STATUS"

tools/testing/selftests/drivers/net/bonding/lag_lib.sh

@@ -0,0 +1,61 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test that a link aggregation device (bonding, team) removes the hardware
+# addresses that it adds on its underlying devices.
+test_LAG_cleanup()
+{
+	local driver=$1
+	local mode=$2
+	local ucaddr="02:00:00:12:34:56"
+	local addr6="fe80::78:9abc/64"
+	local mcaddr="33:33:ff:78:9a:bc"
+	local name
+
+	ip link add dummy1 type dummy
+	ip link add dummy2 type dummy
+	if [ "$driver" = "bonding" ]; then
+		name="bond1"
+		ip link add "$name" up type bond mode "$mode"
+		ip link set dev dummy1 master "$name"
+		ip link set dev dummy2 master "$name"
+	elif [ "$driver" = "team" ]; then
+		name="team0"
+		teamd -d -c '
+			{
+				"device": "'"$name"'",
+				"runner": {
+					"name": "'"$mode"'"
+				},
+				"ports": {
+					"dummy1":
+						{},
+					"dummy2":
+						{}
+				}
+			}
+		'
+		ip link set dev "$name" up
+	else
+		check_err 1
+		log_test test_LAG_cleanup ": unknown driver \"$driver\""
+		return
+	fi
+
+	# Used to test dev->uc handling
+	ip link add mv0 link "$name" up address "$ucaddr" type macvlan
+	# Used to test dev->mc handling
+	ip address add "$addr6" dev "$name"
+	ip link set dev "$name" down
+	ip link del "$name"
+
+	not grep_bridge_fdb "$ucaddr" bridge fdb show >/dev/null
+	check_err $? "macvlan unicast address still present on a slave"
+
+	not grep_bridge_fdb "$mcaddr" bridge fdb show >/dev/null
+	check_err $? "IPv6 solicited-node multicast mac address still present on a slave"
+
+	cleanup
+
+	log_test "$driver cleanup mode $mode"
+}

tools/testing/selftests/drivers/net/team/Makefile

@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for net selftests
+
+TEST_PROGS := dev_addr_lists.sh
+
+include ../../../lib.mk

tools/testing/selftests/drivers/net/team/config

@@ -0,0 +1,3 @@
+CONFIG_NET_TEAM=y
+CONFIG_NET_TEAM_MODE_LOADBALANCE=y
+CONFIG_MACVLAN=y

tools/testing/selftests/drivers/net/team/dev_addr_lists.sh

@@ -0,0 +1,51 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test team device handling of addr lists (dev->uc, mc)
+#
+
+ALL_TESTS="
+	team_cleanup
+"
+
+REQUIRE_MZ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
+
+source "$lib_dir"/../bonding/lag_lib.sh
+
+
+destroy()
+{
+	local ifnames=(dummy0 dummy1 team0 mv0)
+	local ifname
+
+	for ifname in "${ifnames[@]}"; do
+		ip link del "$ifname" &>/dev/null
+	done
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	destroy
+}
+
+
+team_cleanup()
+{
+	RET=0
+
+	test_LAG_cleanup "team" "lacp"
+}
+
+
+require_command teamd
+
+trap cleanup EXIT
+
+tests_run
+
+exit "$EXIT_STATUS"