[ Upstream commit ef7134c7fc48e1441b398e55a862232868a6f0a7 ]
Recently, we got a customer report that CIFS triggers oops while
reconnecting to a server. [0]
The workload runs on Kubernetes, and some pods mount CIFS servers
in non-root network namespaces. The problem rarely happened, but
it was always while the pod was dying.
The root cause is wrong reference counting for network namespace.
CIFS uses kernel sockets, which do not hold refcnt of the netns that
the socket belongs to. That means CIFS must ensure the socket is
always freed before its netns; otherwise, use-after-free happens.
The repro steps are roughly:
1. mount CIFS in a non-root netns
2. drop packets from the netns
3. destroy the netns
4. unmount CIFS
We can reproduce the issue quickly with the script [1] below and see
the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled.
When the socket is TCP, it is hard to guarantee the netns lifetime
without holding refcnt due to async timers.
Let's hold netns refcnt for each socket as done for SMC in commit
9744d2bf19 ("smc: Fix use-after-free in tcp_write_timer_handler().").
Note that we need to move put_net() from cifs_put_tcp_session() to
clean_demultiplex_info(); otherwise, __sock_create() still could touch a
freed netns while cifsd tries to reconnect from cifs_demultiplex_thread().
Also, maybe_get_net() cannot be put just before __sock_create() because
the code is not under RCU and there is a small chance that the same
address happened to be reallocated to another netns.
[0]:
CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting...
CIFS: Serverclose failed 4 times, giving up
Unable to handle kernel paging request at virtual address 14de99e461f84a07
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
[14de99e461f84a07] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs
CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1
Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : fib_rules_lookup+0x44/0x238
lr : __fib_lookup+0x64/0xbc
sp : ffff8000265db790
x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01
x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580
x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500
x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002
x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294
x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000
x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0
x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500
Call trace:
fib_rules_lookup+0x44/0x238
__fib_lookup+0x64/0xbc
ip_route_output_key_hash_rcu+0x2c4/0x398
ip_route_output_key_hash+0x60/0x8c
tcp_v4_connect+0x290/0x488
__inet_stream_connect+0x108/0x3d0
inet_stream_connect+0x50/0x78
kernel_connect+0x6c/0xac
generic_ip_connect+0x10c/0x6c8 [cifs]
__reconnect_target_unlocked+0xa0/0x214 [cifs]
reconnect_dfs_server+0x144/0x460 [cifs]
cifs_reconnect+0x88/0x148 [cifs]
cifs_readv_from_socket+0x230/0x430 [cifs]
cifs_read_from_socket+0x74/0xa8 [cifs]
cifs_demultiplex_thread+0xf8/0x704 [cifs]
kthread+0xd0/0xd4
Code: aa0003f8 f8480f13 eb18027f 540006c0 (b9401264)
[1]:
CIFS_CRED="/root/cred.cifs"
CIFS_USER="Administrator"
CIFS_PASS="Password"
CIFS_IP="X.X.X.X"
CIFS_PATH="//${CIFS_IP}/Users/Administrator/Desktop/CIFS_TEST"
CIFS_MNT="/mnt/smb"
DEV="enp0s3"
cat <<EOF > ${CIFS_CRED}
username=${CIFS_USER}
password=${CIFS_PASS}
domain=EXAMPLE.COM
EOF
unshare -n bash -c "
mkdir -p ${CIFS_MNT}
ip netns attach root 1
ip link add eth0 type veth peer veth0 netns root
ip link set eth0 up
ip -n root link set veth0 up
ip addr add 192.168.0.2/24 dev eth0
ip -n root addr add 192.168.0.1/24 dev veth0
ip route add default via 192.168.0.1 dev eth0
ip netns exec root sysctl net.ipv4.ip_forward=1
ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE
mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1
touch ${CIFS_MNT}/a.txt
ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE
"
umount ${CIFS_MNT}
[2]:
ref_tracker: net notrefcnt@000000004bbc008d has 1/1 users at
sk_alloc (./include/net/net_namespace.h:339 net/core/sock.c:2227)
inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252)
__sock_create (net/socket.c:1576)
generic_ip_connect (fs/smb/client/connect.c:3075)
cifs_get_tcp_session.part.0 (fs/smb/client/connect.c:3160 fs/smb/client/connect.c:1798)
cifs_mount_get_session (fs/smb/client/trace.h:959 fs/smb/client/connect.c:3366)
dfs_mount_share (fs/smb/client/dfs.c:63 fs/smb/client/dfs.c:285)
cifs_mount (fs/smb/client/connect.c:3622)
cifs_smb3_do_mount (fs/smb/client/cifsfs.c:949)
smb3_get_tree (fs/smb/client/fs_context.c:784 fs/smb/client/fs_context.c:802 fs/smb/client/fs_context.c:794)
vfs_get_tree (fs/super.c:1800)
path_mount (fs/namespace.c:3508 fs/namespace.c:3834)
__x64_sys_mount (fs/namespace.c:3848 fs/namespace.c:4057 fs/namespace.c:4034 fs/namespace.c:4034)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Fixes: 26abe14379 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b8fc56fbca7482c1e5c0e3351c6ae78982e25ada upstream.
ksmbd_user_session_put should be called under smb3_preauth_hash_rsp().
It will avoid freeing session before calling smb3_preauth_hash_rsp().
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3abab905b14f4ba756d413f37f1fb02b708eee93 upstream.
xa_store() can fail, it return xa_err(-EINVAL) if the entry cannot
be stored in an XArray, or xa_err(-ENOMEM) if memory allocation failed,
so check error for xa_store() to fix it.
Cc: stable@vger.kernel.org
Fixes: b685757c7b ("ksmbd: Implements sess->rpc_handle_list as xarray")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a77d947f599b1f39065015bec99390d0c0022ee upstream.
If Client send simultaneous SMB operations to ksmbd, It exhausts too much
memory through the "ksmbd_work_cache”. It will cause OOM issue.
ksmbd has a credit mechanism but it can't handle this problem. This patch
add the check if it exceeds max credits to prevent this problem by assuming
that one smb request consumes at least one credit.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a77715db22611df50b178374c51e2ba0d58866e upstream.
There is a race condition between ksmbd_smb2_session_create and
ksmbd_expire_session. This patch add missing sessions_table_lock
while adding/deleting session from global session table.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 63271b7d569fbe924bccc7dadc17d3d07a4e5f7a ]
Calling 'ln -s . symlink' or 'ln -s .. symlink' creates symlink pointing to
some object name which ends with U+F029 unicode codepoint. This is because
trailing dot in the object name is replaced by non-ASCII unicode codepoint.
So Linux SMB client currently is not able to create native symlink pointing
to current or parent directory on Windows SMB server which can be read by
either on local Windows server or by any other SMB client which does not
implement compatible-reverse character replacement.
Fix this problem in cifsConvertToUTF16() function which is doing that
character replacement. Function comment already says that it does not need
to handle special cases '.' and '..', but after introduction of native
symlinks in reparse point form, this handling is needed.
Note that this change depends on the previous change
"cifs: Improve creating native symlinks pointing to directory".
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3eb40512530e4f64f819d8e723b6f41695dace5a ]
SMB protocol for native symlinks distinguish between symlink to directory
and symlink to file. These two symlink types cannot be exchanged, which
means that symlink of file type pointing to directory cannot be resolved at
all (and vice-versa).
Windows follows this rule for local filesystems (NTFS) and also for SMB.
Linux SMB client currenly creates all native symlinks of file type. Which
means that Windows (and some other SMB clients) cannot resolve symlinks
pointing to directory created by Linux SMB client.
As Linux system does not distinguish between directory and file symlinks,
its API does not provide enough information for Linux SMB client during
creating of native symlinks.
Add some heuristic into the Linux SMB client for choosing the correct
symlink type during symlink creation. Check if the symlink target location
ends with slash, or last path component is dot or dot-dot, and check if the
target location on SMB share exists and is a directory. If at least one
condition is truth then create a new SMB symlink of directory type.
Otherwise create it as file type symlink.
This change improves interoperability with Windows systems. Windows systems
would be able to resolve more SMB symlinks created by Linux SMB client
which points to existing directory.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9de67336a4aa3ff2e706ba023fb5f7ff681a954 ]
Fix major and minor numbers set on special files created with NFS
reparse points.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 663f295e35594f4c2584fc68c28546b747b637cd ]
Report correct major and minor numbers from special files created with
NFS reparse points.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a5dd61151399ad5a5d69aad28ab164734c1e3bc ]
In smb3_reconfigure(), after duplicating ctx->password and
ctx->password2 with kstrdup(), we need to check for allocation
failures.
If ses->password allocation fails, return -ENOMEM.
If ses->password2 allocation fails, free ses->password, set it
to NULL, and return -ENOMEM.
Fixes: c1eb537bf456 ("cifs: allow changing password during remount")
Reviewed-by: David Howells <dhowells@redhat.com
Signed-off-by: Haoxiang Li <make24@iscas.ac.cn>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 556ac52bb1e76cc28fd30aa117b42989965b3efd ]
Symlink target location stored in DataBuffer is encoded in UTF-16. So check
that symlink DataBuffer length is non-zero and even number. And check that
DataBuffer does not contain UTF-16 null codepoint because Linux cannot
process symlink with null byte.
DataBuffer for char and block devices is 8 bytes long as it contains two
32-bit numbers (major and minor). Add check for this.
DataBuffer buffer for sockets and fifos zero-length. Add checks for this.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ab60323c5201bef25f2a3dc0ccc404d9aca77f1 ]
When using encryption, either enforced by the server or when using
'seal' mount option, the client will squash all compound request buffers
down for encryption into a single iov in smb2_set_next_command().
SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the
SMB2_IOCTL request in the first iov, and if the user passes an input
buffer that is greater than 328 bytes, smb2_set_next_command() will
end up writing off the end of @rqst->iov[0].iov_base as shown below:
mount.cifs //srv/share /mnt -o ...,seal
ln -s $(perl -e "print('a')for 1..1024") /mnt/link
BUG: KASAN: slab-out-of-bounds in
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
Write of size 4116 at addr ffff8881148fcab8 by task ln/859
CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
print_report+0x156/0x4d9
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
? __virt_addr_valid+0x145/0x310
? __phys_addr+0x46/0x90
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
kasan_report+0xda/0x110
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
kasan_check_range+0x10f/0x1f0
__asan_memcpy+0x3c/0x60
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
smb2_compound_op+0x238c/0x3840 [cifs]
? kasan_save_track+0x14/0x30
? kasan_save_free_info+0x3b/0x70
? vfs_symlink+0x1a1/0x2c0
? do_symlinkat+0x108/0x1c0
? __pfx_smb2_compound_op+0x10/0x10 [cifs]
? kmem_cache_free+0x118/0x3e0
? cifs_get_writable_path+0xeb/0x1a0 [cifs]
smb2_get_reparse_inode+0x423/0x540 [cifs]
? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs]
? rcu_is_watching+0x20/0x50
? __kmalloc_noprof+0x37c/0x480
? smb2_create_reparse_symlink+0x257/0x490 [cifs]
? smb2_create_reparse_symlink+0x38f/0x490 [cifs]
smb2_create_reparse_symlink+0x38f/0x490 [cifs]
? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs]
? find_held_lock+0x8a/0xa0
? hlock_class+0x32/0xb0
? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs]
cifs_symlink+0x24f/0x960 [cifs]
? __pfx_make_vfsuid+0x10/0x10
? __pfx_cifs_symlink+0x10/0x10 [cifs]
? make_vfsgid+0x6b/0xc0
? generic_permission+0x96/0x2d0
vfs_symlink+0x1a1/0x2c0
do_symlinkat+0x108/0x1c0
? __pfx_do_symlinkat+0x10/0x10
? strncpy_from_user+0xaa/0x160
__x64_sys_symlinkat+0xb9/0xf0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f08d75c13bb
Reported-by: David Howells <dhowells@redhat.com>
Fixes: e77fe73c7e ("cifs: we can not use small padding iovs together with encryption")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19ebc1e6cab334a8193398d4152deb76019b5d34 ]
Clang static checker(scan-build) warning：
fs/smb/client/smb2ops.c:1304:2: Attempt to free released memory.
1304 | kfree(ea);
| ^~~~~~~~~
There is a double free in such case:
'ea is initialized to NULL' -> 'first successful memory allocation for
ea' -> 'something failed, goto sea_exit' -> 'first memory release for ea'
-> 'goto replay_again' -> 'second goto sea_exit before allocate memory
for ea' -> 'second memory release for ea resulted in double free'.
Re-initialie 'ea' to NULL near to the replay_again label, it can fix this
double free problem.
Fixes: 4f1fffa23769 ("cifs: commands that are retried should have replay flag set")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7aa8804c0b67b3cb263a472d17f2cb50d7f1a930 upstream.
There is racy issue between smb2 session log off and smb2 session setup.
It will cause user-after-free from session log off.
This add session_lock when setting SMB2_SESSION_EXPIRED and referece
count to session struct not to free session while it is being used.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-25282
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f3017e7cc7515e0110a3733d8dca84de2a1d23d upstream.
Commands like "chmod 0444" mark a file readonly via the attribute flag
(when mapping of mode bits into the ACL are not set, or POSIX extensions
are not negotiated), but they were not reported correctly for stat of
directories (they were reported ok for files and for "ls"). See example
below:
root:~# ls /mnt2 -l
total 12
drwxr-xr-x 2 root root 0 Sep 21 18:03 normaldir
-rwxr-xr-x 1 root root 0 Sep 21 23:24 normalfile
dr-xr-xr-x 2 root root 0 Sep 21 17:55 readonly-dir
-r-xr-xr-x 1 root root 209716224 Sep 21 18:15 readonly-file
root:~# stat -c %a /mnt2/readonly-dir
755
root:~# stat -c %a /mnt2/readonly-file
555
This fixes the stat of directories when ATTR_READONLY is set
(in cases where the mode can not be obtained other ways).
root:~# stat -c %a /mnt2/readonly-dir
555
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a421e3fe0e6abe27395078f4f0cec5daf466caea upstream.
Due to server permission control, the client does not have access to
the shared root directory, but can access subdirectories normally, so
users usually mount the shared subdirectories directly. In this case,
queryfs should use the actual path instead of the root directory to
avoid the call returning an error (EACCES).
Signed-off-by: wangrong <wangrong@uniontech.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ee426bfb9d09b29987369b897fe9b6485ac2be27 ]
When sending an oplock break request, opinfo->conn is used,
But freed ->conn can be used on multichannel.
This patch add a reference count to the ksmbd_conn struct
so that it can be freed when it is no longer used.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3a49f60917323228f8fdeee313260ef14f94df7 ]
NFS-style symlinks have target location always stored in NFS/UNIX form
where backslash means the real UNIX backslash and not the SMB path
separator.
So do not mangle slash and backslash content of NFS-style symlink during
readlink() syscall as it is already in the correct Linux form.
This fixes interoperability of NFS-style symlinks with backslashes created
by Linux NFS3 client throw Windows NFS server and retrieved by Linux SMB
client throw Windows SMB server, where both Windows servers exports the
same directory.
Fixes: d5ecebc490 ("smb3: Allow query of symlinks stored as reparse points")
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2a8910af01653c1c268984855629d71fb81f404 ]
ReparseDataLength is sum of the InodeType size and DataBuffer size.
So to get DataBuffer size it is needed to subtract InodeType's size from
ReparseDataLength.
Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer
at position after the end of the buffer because it does not subtract
InodeType size from the length. Fix this problem and correctly subtract
variable len.
Member InodeType is present only when reparse buffer is large enough. Check
for ReparseDataLength before accessing InodeType to prevent another invalid
memory access.
Major and minor rdev values are present also only when reparse buffer is
large enough. Check for reparse buffer size before calling reparse_mkdev().
Fixes: d5ecebc490 ("smb3: Allow query of symlinks stored as reparse points")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9432ad5e32f066875b1bf95939c363bc46d6a45 ]
If CREATE was successful but SMB2_OP_SET_REPARSE failed then remove the
intermediate object created by CREATE. Otherwise empty object stay on the
server when reparse call failed.
This ensures that if the creating of special files is unsupported by the
server then no empty file stay on the server as a result of unsupported
operation.
Fixes: 102466f303ff ("smb: client: allow creating special files via reparse points")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c5a709f08d40b1a082e44ffcde1aea4d2822ddd5 upstream.
Ray Zhang reported ksmbd can not create file if parent filename is
caseless.
Y:\>mkdir A
Y:\>echo 123 >a\b.txt
The system cannot find the path specified.
Y:\>echo 123 >A\b.txt
This patch convert name obtained by caseless lookup to parent name.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Ray Zhang <zhanglei002@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fb9b5dc80cabcee636a6ccd020740dd925b4580 upstream.
Windows client write with FILE_APPEND_DATA when using git.
ksmbd should allow write it with this flags.
Z:\test>git commit -m "test"
fatal: cannot update the ref 'HEAD': unable to append to
'.git/logs/HEAD': Bad file descriptor
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca4974ca954561e79f8871d220bb08f14f64f57c upstream.
Some file systems may not provide dot (.) and dot-dot (..) as they are
optional in POSIX. ksmbd can misjudge emptiness of a directory in those
file systems, since it assumes there are always at least two entries:
dot and dot-dot.
Just don't count dot and dot-dot.
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Hobin Woo <hobin.woo@samsung.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7ccc1465465d78e6411b7bd730d06e7435802b5c ]
Call cifs_reconnect() to wake up processes waiting on negotiate
protocol to handle the case where server abruptly shut down and had no
chance to properly close the socket.
Simple reproducer:
ssh 192.168.2.100 pkill -STOP smbd
mount.cifs //192.168.2.100/test /mnt -o ... [never returns]
Cc: Rickard Andersson <rickaran@axis.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a20b7cb0d8d3ee490a8e088dc2584aa782e3355 ]
Fix the calculation of packet signatures by adding the offset into a page
in the read or write data payload when hashing the pages from it.
Fixes: 39bc58203f ("cifs: Add a function to Hash the contents of an iterator")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2186a116538a715b20e15f84fdd3545e5fe0a39b ]
In most error cases, error code is not returned in smb2_open(),
__process_request() will not print error message.
Fix this by returning the correct value at the end of smb2_open().
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6bd41280a44dcc2e0a25ed72617d25f586974a7 ]
Sangsoo reported that a DAC denial error occurred when accessing
files through the ksmbd thread. This patch override fsids for
smb2_query_info().
Reported-by: Sangsoo Lee <constant.lee@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a018c1b636e79b60149b41151ded7c2606d8606e ]
Sangsoo reported that a DAC denial error occurred when accessing
files through the ksmbd thread. This patch override fsids for share
path check.
Reported-by: Sangsoo Lee <constant.lee@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3523a3df03c6f04f7ea9c2e7050102657e331a4f ]
If smb2_set_path_attr() is called with a valid @cfile and returned
-EINVAL, we need to call cifs_get_writable_path() again as the
reference of @cfile was already dropped by previous smb2_compound_op()
call.
Fixes: 71f15c90e785 ("smb: client: retry compound request without reusing lease")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e8771a3666c8f216eefd6bd2fd50121c6c437db ]
null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE)
and parse_lease_state() return NULL.
Fix this by check if 'lease_ctx_info' is NULL.
Additionally, remove the redundant parentheses in
parse_durable_handle_context().
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91d1dfae464987aaf6c79ff51d8674880fb3be77 ]
Under certain conditions, the range to be cleared by FALLOC_FL_ZERO_RANGE
may only be buffered locally and not yet have been flushed to the server.
For example:
xfs_io -f -t -c "pwrite -S 0x41 0 4k" \
-c "pwrite -S 0x42 4k 4k" \
-c "fzero 0 4k" \
-c "pread -v 0 8k" /xfstest.test/foo
will write two 4KiB blocks of data, which get buffered in the pagecache,
and then fallocate() is used to clear the first 4KiB block on the server -
but we don't flush the data first, which means the EOF position on the
server is wrong, and so the FSCTL_SET_ZERO_DATA RPC fails (and xfs_io
ignores the error), but then when we try to read it, we see the old data.
Fix this by preflushing any part of the target region that above the
server's idea of the EOF position to force the server to update its EOF
position.
Note, however, that we don't want to simply expand the file by moving the
EOF before doing the FSCTL_SET_ZERO_DATA[*] because someone else might see
the zeroed region or if the RPC fails we then have to try to clean it up or
risk getting corruption.
[*] And we have to move the EOF first otherwise FSCTL_SET_ZERO_DATA won't
do what we want.
This fixes the generic/008 xfstest.
[!] Note: A better way to do this might be to split the operation into two
parts: we only do FSCTL_SET_ZERO_DATA for the part of the range below the
server's EOF and then, if that worked, invalidate the buffered pages for the
part above the range.
Fixes: 6b69040247 ("cifs/smb3: Fix data inconsistent when zero file range")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
cc: Pavel Shilovsky <pshilov@microsoft.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 844436e045ac2ab7895d8b281cb784a24de1d14d upstream.
Unlock before returning an error code if this allocation fails.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ddecea00f87f0c46e9c8339a7c89fb2ff891521a ]
NetApp server requires the file to be open with FILE_READ_EA access in
order to support FSCTL_GET_REPARSE_POINT, otherwise it will return
STATUS_INVALID_DEVICE_REQUEST. It doesn't make any sense because
there's no requirement for FILE_READ_EA bit to be set nor
STATUS_INVALID_DEVICE_REQUEST being used for something other than
"unsupported reparse points" in MS-FSA.
To fix it and improve compatibility, set FILE_READ_EA & SYNCHRONIZE
bits to match what Windows client currently does.
Tested-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 416871f4fb84bc96822562e654941d5625a25bf8 ]
The cifs filesystem doesn't quite emulate FALLOC_FL_PUNCH_HOLE correctly
(note that due to lack of protocol support, it can't actually implement it
directly). Whilst it will (partially) invalidate dirty folios in the
pagecache, it doesn't write them back first, and so the EOF marker on the
server may be lower than inode->i_size.
This presents a problem, however, as if the punched hole invalidates the
tail of the locally cached dirty data, writeback won't know it needs to
move the EOF over to account for the hole punch (which isn't supposed to
move the EOF). We could just write zeroes over the punched out region of
the pagecache and write that back - but this is supposed to be a
deallocatory operation.
Fix this by manually moving the EOF over on the server after the operation
if the hole punched would corrupt it.
Note that the FSCTL_SET_ZERO_DATA RPC and the setting of the EOF should
probably be compounded to stop a third party interfering (or, at least,
massively reduce the chance).
This was reproducible occasionally by using fsx with the following script:
truncate 0x0 0x375e2 0x0
punch_hole 0x2f6d3 0x6ab5 0x375e2
truncate 0x0 0x3a71f 0x375e2
mapread 0xee05 0xcf12 0x3a71f
write 0x2078e 0x5604 0x3a71f
write 0x3ebdf 0x1421 0x3a71f *
punch_hole 0x379d0 0x8630 0x40000 *
mapread 0x2aaa2 0x85b 0x40000
fallocate 0x1b401 0x9ada 0x40000
read 0x15f2 0x7d32 0x40000
read 0x32f37 0x7a3b 0x40000 *
The second "write" should extend the EOF to 0x40000, and the "punch_hole"
should operate inside of that - but that depends on whether the VM gets in
and writes back the data first. If it doesn't, the file ends up 0x3a71f in
size, not 0x40000.
Fixes: 31742c5a33 ("enable fallocate punch hole ("fallocate -p") for SMB3")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c724b2ab6a46435b4e7d58ad2fbbdb7a318823cf upstream.
This happens when called from SMB2_read() while using rdma
and reaching the rdma_readwrite_threshold.
Cc: stable@vger.kernel.org
Fixes: a6559cc1d3 ("cifs: split out smb3_use_rdma_offload() helper")
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 76e98a158b207771a6c9a0de0a60522a446a3447 ]
If there is ->PreviousSessionId field in the session setup request,
The session of the previous connection should be destroyed.
During this, if the smb2 operation requests in the previous session are
being processed, a racy issue could happen with ksmbd_destroy_file_table().
This patch sets conn->status to KSMBD_SESS_NEED_RECONNECT to block
incoming operations and waits until on-going operations are complete
(i.e. idle) before desctorying the previous session.
Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2")
Cc: stable@vger.kernel.org # v6.6+
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-25040
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce61b605a00502c59311d0a4b1f58d62b48272d0 upstream.
When STATUS_NO_MORE_FILES status is set to smb2 query dir response,
->StructureSize is set to 9, which mean buffer has 1 byte.
This issue occurs because ->Buffer[1] in smb2_query_directory_rsp to
flex-array.
Fixes: eb3e28c1e8 ("smb3: Replace smb2pdu 1-element arrays with flex-arrays")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ec686804117a0421cf31d54427768aaf93aa0069 ]
Just ignore reparse points that the client can't parse rather than
bailing out and not opening the file or directory.
Reported-by: Marc <1marc1@gmail.com>
Closes: https://lore.kernel.org/r/CAMHwNVv-B+Q6wa0FEXrAuzdchzcJRsPKDDRrNaYZJd6X-+iJzw@mail.gmail.com
Fixes: 539aad7f14da ("smb: client: introduce ->parse_reparse_point()")
Tested-by: Anthony Nandaa (Microsoft) <profnandaa@gmail.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1b5487aefb1ce7a6b1f15a33297d1231306b4122 upstream.
Setting encryption as required in security flags was broken.
For example (to require all mounts to be encrypted by setting):
"echo 0x400c5 > /proc/fs/cifs/SecurityFlags"
Would return "Invalid argument" and log "Unsupported security flags"
This patch fixes that (e.g. allowing overriding the default for
SecurityFlags 0x00c5, including 0x40000 to require seal, ie
SMB3.1.1 encryption) so now that works and forces encryption
on subsequent mounts.
Acked-by: Bharath SM <bharathsm@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 36bb22a08a69d9984a8399c07310d18b115eae20 ]
Replace the always-true check tcon->origin_fullpath with
check of server->leaf_fullpath
See https://bugzilla.kernel.org/show_bug.cgi?id=219083
The check of the new @tcon will always be true during mounting,
since @tcon->origin_fullpath will only be set after the tree is
connected to the latest common resource, as well as checking if
the prefix paths from it are fully accessible.
Fixes: 3ae872de41 ("smb: client: fix shared DFS root mounts with different prefixes")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Gleb Korobeynikov <gkorobeynikov@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b96024ef2296b1d323af327cae5e52809b61420 ]
As per MS-FSA 2.1.5.10.14, support for FSCTL_GET_REPARSE_POINT is
optional and if the server doesn't support it,
STATUS_INVALID_DEVICE_REQUEST must be returned for the operation.
If we find files with reparse points and we can't read them due to
lack of client or server support, just ignore it and then treat them
as regular files or junctions.
Fixes: 5f71ebc412 ("smb: client: parse reparse point flag in create response")
Reported-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Tested-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0e314e452687ce0ec5874e42cdb993a34325d3d2 upstream.
Although by default we negotiate CIFS Unix Extensions for SMB1 mounts to
Samba (and they work if the user does not specify "unix" or "posix" or
"linux" on mount), and we do properly handle when a user turns them off
with "nounix" mount parm. But with the changes to the mount API we
broke cases where the user explicitly specifies the "unix" option (or
equivalently "linux" or "posix") on mount with vers=1.0 to Samba or other
servers which support the CIFS Unix Extensions.
"mount error(95): Operation not supported"
and logged:
"CIFS: VFS: Check vers= mount option. SMB3.11 disabled but required for POSIX extensions"
even though CIFS Unix Extensions are supported for vers=1.0 This patch fixes
the case where the user specifies both "unix" (or equivalently "posix" or
"linux") and "vers=1.0" on mount to a server which supports the
CIFS Unix Extensions.
Cc: stable@vger.kernel.org
Reviewed-by: David Howells <dhowell@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a214384ce26b6111ea8c8d58fa82a1ca63996c38 upstream.
When mounting with the SMB1 Unix Extensions (e.g. mounts
to Samba with vers=1.0), reconnects no longer reset the
Unix Extensions (SetFSInfo SET_FILE_UNIX_BASIC) after tcon so most
operations (e.g. stat, ls, open, statfs) will fail continuously
with:
"Operation not supported"
if the connection ever resets (e.g. due to brief network disconnect)
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 193cc89ea0ca1da311877d2b4bb5e9f03bcc82a2 upstream.
Dan Carpenter reported a Smack static checker warning:
fs/smb/client/cifsfs.c:1981 init_cifs()
error: we previously assumed 'serverclose_wq' could be null (see line 1895)
The patch which introduced the serverclose workqueue used the wrong
oredering in error paths in init_cifs() for freeing it on errors.
Fixes: 173217bd7336 ("smb3: retrying on failed server close")
Cc: stable@vger.kernel.org
Cc: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Howells <dhowell@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae4ccca47195332c69176b8615c5ee17efd30c46 upstream.
There are common cases where copy_file_range can noisily
log "source and target of copy not on same server"
e.g. the mv command across mounts to two different server's shares.
Change this to informational rather than logging as an error.
A followon patch will add dynamic trace points e.g. for
cifs_file_copychunk_range
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 25a6e135569b3901452e4863c94560df7c11c492 ]
MS-SMB2 specification describes setting ->DeviceType to FILE_DEVICE_DISK
or FILE_DEVICE_CD_ROM. Set FILE_DEVICE_DISK instead of super magic in
FS_DEVICE_INFORMATION. And Set FILE_READ_ONLY_DEVICE for read-only share.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
