commit 96409eeab8cdd394e03ec494ea9547edc27f7ab4 upstream.
HP EliteBook 645 G10 uses ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Maksym Glubokiy <maxgl.kernel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241112154815.10888-1-maxgl.kernel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42ee87df8530150d637aa48363b72b22a9bbd78f upstream.
Clevo platform with ALC255 Headset Mic was disable by default.
Assigned verb table for Mic pin will enable it.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/b2dcac3e09ef4f82b36d6712194e1ea4@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9363bbb0f68dd1ddb8be7bbfe958cdfcd38d851 upstream.
Commit 4f61c8fe3520 ("ALSA: hda/conexant: Mute speakers at suspend /
shutdown") mutes speakers on system shutdown or whenever HDA controller
is suspended by PM; this however interacts badly with Thinkpad's ACPI
firmware behavior which uses beeps to signal various events (enter/leave
suspend or hibernation, AC power connect/disconnect, low battery, etc.);
now those beeps are either muted altogether (for suspend/hibernate/
shutdown related events) or work more or less randomly (eg. AC
plug/unplug is only audible when you are playing music at the moment,
because HDA device is likely in suspend mode otherwise).
Since the original bug report mentioned in 4f61c8fe3520 complained about
Lenovo's Thinkpad laptop - revert this commit altogether.
Fixes: 4f61c8fe3520 ("ALSA: hda/conexant: Mute speakers at suspend / shutdown")
Signed-off-by: Jarosław Janik <jaroslaw.janik@gmail.com>
Link: https://patch.msgid.link/20241030171813.18941-2-jaroslaw.janik@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35fdc6e1c16099078bcbd73a6c8f1733ae7f1909 upstream.
The Acer Predator G9-593 has a 2+1 speaker system which isn't probed
correctly.
This patch adds a quirk with the proper pin connections.
Note that I do not own this laptop, so I cannot guarantee that this
fixes the issue.
Testing was done by other users here:
https://discussion.fedoraproject.org/t/-/118482
This model appears to have two different dev IDs...
- 0x1177 (as seen on the forum link above)
- 0x1178 (as seen on https://linux-hardware.org/?probe=127df9999f)
I don't think the audio system was changed between model revisions, so
the patch applies for both IDs.
Signed-off-by: José Relvas <josemonsantorelvas@gmail.com>
Link: https://patch.msgid.link/20241020102756.225258-1-josemonsantorelvas@gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86c96e7289c5758284b562ac7b5c94429f48d2d9 upstream.
Fix the kconfig option for the tas2781 HDA driver to select CRC32 rather
than CRC32_SARWATE. CRC32_SARWATE is an option from the kconfig
'choice' that selects the specific CRC32 implementation. Selecting a
'choice' option seems to have no effect, but even if it did work, it
would be incorrect for a random driver to override the user's choice.
CRC32 is the correct option to select for crc32() to be available.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://patch.msgid.link/20241020175624.7095-1-ebiggers@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c9bd4a82b4ed32c6d1c90500a52063e6e341517f ]
If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then
NULL pointer dereference will occur in the next line.
Since dolphin_fixups function is a hda_fixup function which is not supposed
to return any errors, add simple check before dereference, ignore the fail.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 20e5077241 ("ALSA: hda/cs8409: Add support for dolphin")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Link: https://patch.msgid.link/20241010221649.1305-1-m.masimov@maxima.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 164cd0e077a18d6208523c82b102c98c77fdd51f upstream.
The cached version avoids redundant commands to the codec, improving
stability and reducing unnecessary operations. This change ensures
better power management and reliable restoration of pin configurations,
especially after hibernation (S4) and other power transitions.
Fixes: 9988844c457f ("ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2")
Suggested-by: Kai-Heng Feng <kaihengf@nvidia.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20241016080713.46801-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9988844c457f6f17fb2e75aa000b6c3b1b673bb9 upstream.
There is a problem with simultaneous audio output to headphones and
speakers, and when headphones are turned off, the speakers also turn
off and do not turn them on.
However, it was found that if you boot linux immediately after windows,
there are no such problems. When comparing alsa-info, the only difference
is the different configuration of Node 0x1d:
working conf. (windows): Pin-ctls: 0x80: HP
not working (linux): Pin-ctls: 0xc0: OUT HP
This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the
described problem.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241009134248.662175-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9246b487ab3c3b5993aae7552b7a4c541cc14a49 ]
Add DMA support for audio function of Glenfly Arise chip, which uses
Requester ID of function 0.
Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com
Signed-off-by: SiyuLi <siyuli@glenfly.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
[bhelgaas: lower-case hex to match local code, drop unused Device IDs]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b91050448897663b60b6d15525c8c3ecae28a368 ]
The patch 51d976079976c800ef19ed1b542602fcf63f0edb ("ALSA: hda/realtek:
Add quirks for ASUS Zenbook 2022 Models") modified the entry 1043:1e2e
from "ASUS UM3402" to "ASUS UM6702RA/RC" and added another entry for
"ASUS UM3402" with 104e:1ee2.
The first entry was correct, while the new one corresponds to model
"ASUS UM6702RA/RC"
Fix the model names for both devices.
Fixes: 51d976079976 ("ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models")
Signed-off-by: Jean-Loïc Charroud <lagiraudiere+linux@free.fr>
Link: https://lore.kernel.org/r/1656546983.650349575.1707867732866.JavaMail.zimbra@free.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d75dba49744478c32f6ce1c16b5f391c2d5cef5f upstream.
Add the quirk for HP Pavilion Gaming laptop 15z-ec200 for
enabling the mute led. The fix apply the ALC285_FIXUP_HP_MUTE_LED
quirk for this model.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219303
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240930145300.4604-1-abhishektamboli9@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dee476950cbd83125655a3f49e00d63b79f6114e upstream.
The headset mic requires a fixup to be properly detected/used.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240926060252.25630-1-aichao@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f7f36a4559ef78a6418c5f0447fbfbdcf671956 upstream.
This reverts commit 478689b5990deb626a0b3f1ebf165979914d6be4.
The fix seems leading to regressions for other systems.
Also, the way to check the presence of IOMMU via get_dma_ops() isn't
reliable and it's no longer applicable for 6.12. After all, it's no
right fix, so let's revert it at first.
To be noted, the PCM buffer allocation has been changed to try the
continuous pages at first since 6.12, so the problem could be already
addressed without this hackish workaround.
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Closes: https://lore.kernel.org/ZvgCdYfKgwHpJXGE@eldamar.lan
Link: https://patch.msgid.link/20241002155948.4859-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c01f3815453e2d5f699ccd8c8c1f93a5b8669e59 ]
The current MIDI input flush on HDSP and HDSPM drivers relies on the
hardware reporting the right value. If the hardware doesn't give the
proper value but returns -1, it may be stuck at an infinite loop.
Add a counter and break if the loop is unexpectedly too long.
Link: https://patch.msgid.link/20240808091513.31380-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b986c7430a6bb68d523dac7bfc74cbd5b44ef96 ]
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size.
Link: https://patch.msgid.link/20240808091454.30846-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3ebb007060f89d5a45c9b99f06a55e36a1945b5 ]
We received a regression report for System76 Pangolin (pang14) due to
the recent fix for Tuxedo Sirius devices to support the top speaker.
The reason was the conflicting PCI SSID, as often seen.
As a workaround, now the codec SSID is checked and the quirk is
applied conditionally only to Sirius devices.
Fixes: 4178d78cd7a8 ("ALSA: hda/conexant: Add pincfg quirk to enable top speakers on Sirius devices")
Reported-by: Christian Heusel <christian@heusel.eu>
Reported-by: Jerry <jerryluo225@gmail.com>
Closes: https://lore.kernel.org/c930b6a6-64e5-498f-b65a-1cd5e0a1d733@heusel.eu
Link: https://patch.msgid.link/20241004082602.29016-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c801e7f77445bc56e5e1fec6191fd4503534787 ]
Some time ago, we introduced the obey_preferred_dacs flag for choosing
the DAC/pin pairs specified by the driver instead of parsing the
paths. This works as expected, per se, but there have been a few
cases where we forgot to set this flag while preferred_dacs table is
already set up. It ended up with incorrect wiring and made us
wondering why it doesn't work.
Basically, when the preferred_dacs table is provided, it means that
the driver really wants to wire up to follow that. That is, the
presence of the preferred_dacs table itself is already a "do-it"
flag.
In this patch, we simply replace the evaluation of obey_preferred_dacs
flag with the presence of preferred_dacs table for fixing the
misbehavior. Another patch to drop of the obsoleted flag will
follow.
Fixes: 242d990c15 ("ALSA: hda/generic: Add option to enforce preferred_dacs pairs")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1219803
Link: https://patch.msgid.link/20241001121439.26060-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05df9732a0894846c46d0062d4af535c5002799d ]
The headset push button cannot work properly in case of the ALC257.
This patch reverted the previous commit to correct the side effect.
Fixes: ef9718b3d54e ("ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7")
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://patch.msgid.link/20240930105039.3473266-1-oder_chiou@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48f1434a4632c7da1a6a94e159512ebddbe13392 ]
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from spi_device_id table.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://patch.msgid.link/20240815091312.757139-1-liuyuntao12@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2c0b67dca3cb3b3cea0dd60075a1c5ba77e2fcd ]
The tas2781-i2c driver gets an IRQ from either ACPI or device tree,
then proceeds to check if the IRQ has a corresponding GPIO and in
case it does enforce the GPIO as input and set a label on it.
This is abuse of the API:
- First we cannot guarantee that the numberspaces of the GPIOs and
the IRQs are the same, i.e that an IRQ number corresponds to
a GPIO number like that.
- Second, GPIO chips and IRQ chips should be treated as orthogonal
APIs, the irqchip needs to ascertain that the backing GPIO line
is set to input etc just using the irqchip.
- Third it is using the legacy <linux/gpio.h> API which should not
be used in new code yet this was added just a year ago.
Delete the offending code.
If this creates problems the GPIO and irqchip maintainers can help
to fix the issues.
It *should* not create any problems, because the irq isn't
used anywhere in the driver, it's just obtained and then
left unused.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240807-asoc-tas-gpios-v2-1-bd0f2705d58b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4089d82e67a9967fc5bf2b4e5ef820d67fe73924 ]
The acpi_subysystem_id is only written and freed, not read, so
unnecessary.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/454639336be28d2b50343e9c8366a56b0975e31d.1707456753.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: c2c0b67dca3c ("ASoC: tas2781-i2c: Drop weird GPIO code")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fa7b099d60ad64f559bd3b8e3f0d94b2e015514 ]
Dell platform with ALC215 ALC285 ALC289 ALC225 ALC295 ALC299, plug
headphone or headset.
It had a chance to get no sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/d0de1b03fd174520945dde216d765223@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b82ff1362f50914c8292902e07be98a9f59d33d ]
Dell platform, plug headphone or headset, it had a chance to get no
sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/bb8e2de30d294dc287944efa0667685a@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 47a9e8dbb8d4713a9aac7cc6ce3c82dcc94217d8 upstream.
The mute LED on this HP laptop uses ALC236 and requires a quirk to function. This patch enables the existing quirk for the device.
Signed-off-by: Maximilien Perreault <maximilienperreault@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240904031013.21220-1-maximilienperreault@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef27e89e7f3015be2b3c124833fbd6d2e4686561 upstream.
Lenovo V145 is having phase inverted dmic but simply applying inverted
dmic fixups does not work. Chaining up verb fixes for ALC283 enables
inverting dmic fixup to work properly.
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240830-lenovo-v145-fixes-v3-1-f7b7265068fa@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4178d78cd7a86510ba68d203f26fc01113c7f126 upstream.
The Sirius notebooks have two sets of speakers 0x17 (sides) and
0x1d (top center). The side speakers are active by default but
the top speakers aren't.
This patch provides a pincfg quirk to activate the top speakers.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240827102540.9480-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6cd23b26b348fa52c88e1adf9c0e48d68e13f95e ]
Some devices indicate click noises at suspend or shutdown when the
speakers are unmuted. This patch adds a helper,
snd_hda_gen_shutup_speakers(), to work around it. The new function is
supposed to be called at suspend or shutdown by the codec driver, and
it mutes the speakers.
The mute status isn't cached, hence the original mute state will be
restored at resume again.
Link: https://patch.msgid.link/20240726142625.2460-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 829e2a23121fb36ee30ea5145c2a85199f68e2c8 ]
The data conversion is done rather by a wrong function. We convert to
BE32, not from BE32. Although the end result must be same, this was
complained by the compiler.
Fix the code again and align with another similar function
tas2563_apply_calib() that does already right.
Fixes: 3beddef84d90 ("ALSA: hda/tas2781: fix wrong calibrated data order")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408141630.DiDUB8Z4-lkp@intel.com/
Link: https://patch.msgid.link/20240814100500.1944-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef9718b3d54e822de294351251f3a574f8a082ce ]
Fix noise from speakers connected to AUX port when no sound is playing.
The problem occurs because the `alc_shutup_pins` function includes
a 0x10ec0257 vendor ID, which causes noise on Lenovo IdeaPad 3 15IAU7 with
Realtek ALC257 codec when no sound is playing.
Removing this vendor ID from the function fixes the bug.
Fixes: 70794b9563fe ("ALSA: hda/realtek: Add more codec ID to no shutup pins list")
Signed-off-by: Parsa Poorshikhian <parsa.poorsh@gmail.com>
Link: https://patch.msgid.link/20240810150939.330693-1-parsa.poorsh@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3beddef84d90590270465a907de1cfe2539ac70d upstream.
Wrong calibration data order cause sound too low in some device.
Fix wrong calibrated data order, add calibration data converssion
by get_unaligned_be32() after reading from UEFI.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20240813043749.108-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb91c456f3714c336f0812dccab422ec0e72bde4 upstream.
The Framework Laptop 13 (Intel Core Ultra) has an ALC285 that ships in a
similar configuration to the ALC295 in previous models. It requires the
same quirk for headset detection.
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240806-alsa-hda-realtek-add-framework-laptop-13-intel-core-ultra-to-quirks-v1-1-42d6ce2dbf14@howett.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 478689b5990deb626a0b3f1ebf165979914d6be4 ]
The recent regression report revealed that the use of WC pages for AMD
HDMI device together with AMD IOMMU leads to unexpected truncation or
noises. The issue seems triggered by the change in the kernel core
memory allocation that enables IOMMU driver to use always S/G
buffers. Meanwhile, the use of WC pages has been a workaround for the
similar issue with standard pages in the past. So, now we need to
apply the workaround conditionally, namely, only when IOMMU isn't in
place.
This patch modifies the workaround code to check the DMA ops at first
and apply the snoop-off only when needed.
Fixes: f5ff79fddf ("dma-mapping: remove CONFIG_DMA_REMAP")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087
Link: https://patch.msgid.link/20240731170521.31714-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e60dc98122110594d0290845160f12916192fc6d ]
The previous fix (7aeb25908648) only handles the unsol_event reporting
during interrupts and does not include the polling mode used to set
jackroll_ms, so now we are replacing it with
snd_hda_jack_detect_enable_callback.
Fixes: 7aeb25908648 ("ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140")
Co-developed-by: bo liu <bo.liu@senarytech.com>
Signed-off-by: bo liu <bo.liu@senarytech.com>
Signed-off-by: songxiebing <songxiebing@kylinos.cn>
Link: https://patch.msgid.link/20240726100726.50824-1-soxiebing@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d7063c08738573fc2f3296da6d31a22fa8aa843a upstream.
Samsung Galaxy Book Pro 360 (13" 2022 NT935QDB-KC71S) with codec SSID
144d:c1a4 requires the same workaround to enable the speaker amp
as other Samsung models with the ALC298 codec.
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240718080908.8677-1-kkamagui@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fc1e8b230771442133d5cf5fa4313277aa2bb8b upstream.
Positivo SU C1400 is equipped with ALC256, and it needs
ALC269_FIXUP_ASPIRE_HEADSET_MIC quirk to make its headset mic work.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240712180642.22564-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9b1effff19cdf2230d3ecb07ff4038a0da32e9cc ]
The ACPI IDs used in the CS35L56 HDA drivers are all handled by the
serial multi-instantiate driver which starts multiple Linux device
instances from a single ACPI Device() node.
As serial multi-instantiate is not an optional part of the system add it
as a dependency in Kconfig so that it is not overlooked.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/20240619161602.117452-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70794b9563fe011988bcf6a081af9777e63e8d37 ]
If it enter to runtime D3 state, it didn't shutup Headset MIC pin.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/8d86f61e7d6f4a03b311e4eb4e5caaef@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
