mirror of
https://gitee.com/bianbu-linux/linux-6.6
synced 2025-07-24 01:54:03 -04:00
2680 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
bb4ed26e7e |
SoC: Add support for StarFive JH7100 RISC-V SoC
This adds support for the StarFive JH7100, including the necessary device drivers and DT files for the BeagleV Starlight prototype board, with additional boards to be added later. This SoC promises to be the first usable low-cost platform for RISC-V. I've taken this through the SoC tree in the anticipation of adding a few other Arm based SoCs as well, but those did not pass the review in time, so it's only this one. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHE4/wACgkQmmx57+YA GNlSlRAArOIWkgB8Uwf2dz1tdyGNo6b0yqrqPBnc2hlafQVkrd/Cy0imIEt21pJk IkVviuuJmWMS7lFppvjoKbTZDvGt4gcA2o//NorBtSLV5G7mbJAMkeDtfdURRAb0 c7IXbtHaI5qMPHXOzjbKTHedbLJpS2P1uXQtGr9hiZFP8ZfyfbEF1bzL0edcCAWi DuY7cpEHEzeKATN8NQ1ETwpx0MJBfp7pzyfQbB9I1VvIMX1qbuLBUUJ6snLGSiw1 kvLrQoV+2ZISeEfQ8M/PoHpHexO7CzY0thlTFt2mThLVI0ZlaVJvI6oJDAX5AG67 tsmDiBxzvp+gWx5T8TfCgETJOVPUpNpSodF8U+cvIIpZM+DLiDc3Dyu6Zrod5guZ y989Sc+Be1LZEEyy0VscCoDleNxuFohh8aNJZnRtzd5UfJnz7cDIfGUdS2hwP9JN vI7Ci4nQIcvG35RwnLVMOp1azm3RIv2xoESdLkbS9/4smNEjLT1xtr6uVcP+MIKE qsWh8TITRWF4aiFqmsz1JyTHFAL0cCi4lZM//Y6XGKM2z0sCmpbfHIEGhJWuSNme lXvqn62VfiA5CvSnijYMwtRnCKIDDhsjvQo6H0gxCqW6ynCnKAivL/yo65hqtQO8 wBpmlziU7IXx4Js/1eGpF7zq7a9LHFqFnKCrE/+7hK/DPGF2Qck= =X5uk -----END PGP SIGNATURE----- Merge tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull RISC-V SoC updates from Arnd Bergmann: "Add support for StarFive JH7100 RISC-V SoC This adds support for the StarFive JH7100, including the necessary device drivers and DT files for the BeagleV Starlight prototype board, with additional boards to be added later. This SoC promises to be the first usable low-cost platform for RISC-V. I've taken this through the SoC tree in the anticipation of adding a few other Arm based SoCs as well, but those did not pass the review in time, so it's only this one" * tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: reset: starfive-jh7100: Fix 32bit compilation RISC-V: Add BeagleV Starlight Beta device tree RISC-V: Add initial StarFive JH7100 device tree serial: 8250_dw: Add StarFive JH7100 quirk dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts pinctrl: starfive: Add pinctrl driver for StarFive SoCs dt-bindings: pinctrl: Add StarFive JH7100 bindings dt-bindings: pinctrl: Add StarFive pinctrl definitions reset: starfive-jh7100: Add StarFive JH7100 reset driver dt-bindings: reset: Add Starfive JH7100 reset bindings dt-bindings: reset: Add StarFive JH7100 reset definitions clk: starfive: Add JH7100 clock generator driver dt-bindings: clock: starfive: Add JH7100 bindings dt-bindings: clock: starfive: Add JH7100 clock definitions dt-bindings: interrupt-controller: Add StarFive JH7100 plic dt-bindings: timer: Add StarFive JH7100 clint RISC-V: Add StarFive SoC Kconfig option |
||
|
Linus Torvalds
|
aca48b2dd1 |
ARM: SoC devicetree changes for v5.17
As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms.
All the newly supported SoCs belong into existing families
this time:
- Qualcomm gets support for two newly announced platforms, both
of which can now work in production environments: the SDX65
5G modem that can run a minimal Linux on its Cortex-A7 core,
and the Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3
family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread
i.MX8 series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that
we have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013,
while MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two
new SoCs, plus a number of Chromebook variants and phones based
on the Snapdragon 7c, 845 and 888 SoCs, including various
Sony Xperia devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit
chips out of the box, including a number of ASUS Transformer
tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top
box based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908.
-----BEGIN PGP SIGNATURE-----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=IF3G
-----END PGP SIGNATURE-----
Merge tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms. All the
newly supported SoCs belong into existing families this time:
- Qualcomm gets support for two newly announced platforms, both of
which can now work in production environments: the SDX65 5G modem
that can run a minimal Linux on its Cortex-A7 core, and the
Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3 family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two new
SoCs, plus a number of Chromebook variants and phones based on the
Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit chips
out of the box, including a number of ASUS Transformer tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top box
based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908"
* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: Remove "spidev" nodes
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
...
|
||
Arnd Bergmann
|
c03b7ba969 |
Qualcomm ARM64 DeviceTree updates for v5.17
This introduces initial support for the brand new Snapdragon 8 Gen 1, aka SM8450 platform, with SMP, CPUfreq, cluster idling, low speed buses, TLMM pinctrl, SMMU, regulators, clocks, power-domains, UFS storage and USB currently supported. SDM845 adds new support for Sony Xperia XZ2, XZ2C and XZ3. The Lenovo Yoga C630 gains a few audio related fixes. The PMIC's VADC channels are described as thermal zones. OnePlus devices gains msm-id and board-id, to facilitate a single firmware image for the multiple devices. On SM8350 the Sony Xperia 1 III and 5 III, as well as initial description of Microsoft's Surface Duo 2 are introduced. On the platform side, LLCC, QUP nodes, redistributor stride and all the low-speed QUPs are added MSM8996 gained various regulator fixes, and adsp firmware name to faciliate pushing firmware to linux-firmware. Xiaomi Mi Note 2 gained touchkey controller definition. On SDM660 the Xiaomi Redmi Note 7 gained power and volume keys, RPM and regulator definitions, USB, eMMC and SD-card and a simple-framebuffer description. MSM8916 has the mmc aliases corrected, to stop the storage devices to move around and the RPM sleep stats memory is described. Support for the Samsung J5 2015 smartphone is introduced. SM6350 validation errors are fixed and and description of the audio, compute and modem remoteprocs are added. A couple new revisions of the SC7180 based Google devices are added. The SC7280 platform gains venus and a few fixes. The CRD development device is introduced, with the EC, touchscreen and touchpad. On SM8250 CPU opp-tables, for scaling L3 cache and DDR frequency based on CPU frequency, are added. As is TX, RX macros and SoundWire blocks and used to enable audio on the SM8350 MTP. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmHDQQobHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FzJAQANU2GokY9/BRKTNJjZFj CIvSBWpBD6wAzqdWqIJBRSbhWDO58Oyu1qRMOw5iylKCqkb89vbcKorpwq6/8l7j Sttox8iRtd/N5GqgwwFB109DSWs6TqRd4rnbYd9au3c21RSLYYgLa1v9f6OobdZi vbY6DQBTHYYClLPYvn5iUMy6JGTFsR5EAjcEJj0cZ1178tKP0Do38Hldeo/wvX37 oqA1GXG3uCtbYKG+gJcNSfwvOo9q0ki5oacGuUWVOWkL+Vj2LiMbhhzDJlu8tF8M VzAy3o6UN2+hquJVxQsfs5wfgcLVK/IdMyjiaEe5GZd9SWmtSt4n+CUQ0ZkDPBfR KkIOci4M0WoHlmY/IPELS9MfDxdDeJn+u8v8jpM/vEZMOSCZiBFcvNPPD7aBP9VK c+f8eVf21NGxfZ4zA9bkp9aBACyv4zfjo/iFd3TmT1P78sDOJMI7pG3APHOYY9Fc ZKT9uTcca9KgVzTZcLzvD69OudrHP9pw6QdT4OT1fy/EPtj2+9hHN+cfty+iAtDN sgIcFmWBryO6OctgF+CA/FuojYi6PB2WOfvECljnmQwfIxDnz/6EGbbG97yH0FZr TE4BasLkdQZZPrTxgj1kpu++CrkFeUhpsEciQjDxYoCJ3mFAXNws6prxKpTh1jcg dalfKkiEX1ww3WsfciUb0X/V =/hGD -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DeviceTree updates for v5.17 This introduces initial support for the brand new Snapdragon 8 Gen 1, aka SM8450 platform, with SMP, CPUfreq, cluster idling, low speed buses, TLMM pinctrl, SMMU, regulators, clocks, power-domains, UFS storage and USB currently supported. SDM845 adds new support for Sony Xperia XZ2, XZ2C and XZ3. The Lenovo Yoga C630 gains a few audio related fixes. The PMIC's VADC channels are described as thermal zones. OnePlus devices gains msm-id and board-id, to facilitate a single firmware image for the multiple devices. On SM8350 the Sony Xperia 1 III and 5 III, as well as initial description of Microsoft's Surface Duo 2 are introduced. On the platform side, LLCC, QUP nodes, redistributor stride and all the low-speed QUPs are added MSM8996 gained various regulator fixes, and adsp firmware name to faciliate pushing firmware to linux-firmware. Xiaomi Mi Note 2 gained touchkey controller definition. On SDM660 the Xiaomi Redmi Note 7 gained power and volume keys, RPM and regulator definitions, USB, eMMC and SD-card and a simple-framebuffer description. MSM8916 has the mmc aliases corrected, to stop the storage devices to move around and the RPM sleep stats memory is described. Support for the Samsung J5 2015 smartphone is introduced. SM6350 validation errors are fixed and and description of the audio, compute and modem remoteprocs are added. A couple new revisions of the SC7180 based Google devices are added. The SC7280 platform gains venus and a few fixes. The CRD development device is introduced, with the EC, touchscreen and touchpad. On SM8250 CPU opp-tables, for scaling L3 cache and DDR frequency based on CPU frequency, are added. As is TX, RX macros and SoundWire blocks and used to enable audio on the SM8350 MTP. * tag 'qcom-arm64-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (92 commits) arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX arm64: dts: qcom: sm8450-qrd: Enable USB nodes arm64: dts: qcom: sm8450: Add usb nodes arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes arm64: dts: qcom: sm8450: add cpufreq support arm64: dts: qcom: sm8450: Add rpmhpd node arm64: dts: qcom: sm8450-qrd: enable ufs nodes arm64: dts: qcom: sm8450: add ufs nodes arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes arm64: dts: qcom: Add base SM8450 QRD DTS arm64: dts: qcom: sm8450: add smmu nodes arm64: dts: qcom: sm8450: Add reserved memory nodes arm64: dts: qcom: sm8450: Add tlmm nodes arm64: dts: qcom: Add base SM8450 DTSI arm64: dts: qcom: ipq6018: Fix gpio-ranges property arm64: dts: qcom: sdm845: add QFPROM chipset specific compatible arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node arm64: qcom: dts: drop legacy property #stream-id-cells Revert "arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer" ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
dfdded9b0b |
Qualcomm DeviceTree updates for v5.17
To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe endpoint controller, as well as enables these for the FN960 device. The SDX65 5G platform is introduced, currently with definitions necessary to boot to a shell. The undocumented property "input-name" is dropped throughout the dts files, dwc3 nodes throughout gains more specific compatibles and lastly building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to its normal operation in 64-bit mode. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmHBVYobHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FruwQAIkncBLbeVIk2ioM7xEH WRpd5yDczi2LVsXaDCjmCu9s4MMMaDYYUiQWSh1etovEdN+x8t4R8gzeNYDkZNX3 T0g3+x7bL0xjynQo4HEje8fzYZryCmWZfmYbqggawLWynUDXyYLSNFh+bxKEFpLw uxOiNXzmTRZQhNUE60JV2BJCNuZls+pjthURbTAGWZ/LoBhgW6RjADOqGHVz1eF0 RIz8YPRaVN0lTrBxPAwwJDJ4AWo5nG5zNiy0/0fxnxabvr32N/2YBl2dCJ3hMgZB /OIsMS21b2wYbOR59NgD/vauGXUeGnophcWnMmIEPA9D/ZiJiKYNteWLfEbUNKnC sy/XXZbo0y+uHBIxFsmg8m4Dh5WBmkAgoINwEZ/0BFTVoCbQq6Oi8xnkkvPc61L1 r/ZUpFr13xzV3s1e2dSPAlgW3P7WfgTyXTN/5YkNi4dT47uD71EiHTDvcUEocFcg gPyjm4SSRo/1HUqPOJMeFnVx5mv4cCo2OrnkQWKaCENgWg07wFq3lXJjOB666jMF OEXRKPmH8tA3eVexy0tayO1bps/Go2MGjERtRxz/EUw8UDWO/0SerhplYD/vMmFU NLOWbwIAUoJT5daiAsUYJQr1KBnJMlkFsim0Nd962rKZTX4F5cKkkJv8ucrwN+01 SZoQVfDBHlZtMuMsJn/Sxqk/ =SjjW -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHB5qAACgkQmmx57+YA GNkkxxAAw0GqWdbEiF2rNpTHsZgJnsDJpIfxFgONdzVA6C4pDi2YUlp5GgKitBzQ zok21TebNPTNOEf7q8FqubpleDU+x913eJaYYQA8DRmx5fHeNkzYt6jMAE5c3V5Y fpcRSLV0GLiT48tzhK/r3917/jZWnjcp7eKWDWByyavzkphgcVTbqYYBYZVltkzH s/nyIu8zdSvCmOLMipRrH85GSVi372DU6bD/ejHdz0yXv/RsT2/2DZA6ZeJSF3FQ qpZEnGxnizGrqcP6b3g6xVjVEYmwHC8js3B8scUyM/I9j+h/LAQD8yRXLivj5kwm tM/mtCGaIfux3ca1B0cRe5DTZP3jPa7vKUmIxTVJsjfgKyco9vwJlPIyHdSBKqQQ n7HtB2jBruCjb2IhtHjhCC0htPKFpEUs6k1SK3UB+I3usEfMhut/FC5RFU9Pz6ta GtQ8k6ucdJySQDxgOF62EFqEjQmcDNOqTl07rgosXx4zrh4TYNlvW6v6/N3QblPp 8eRQGgK6HZMAypL1HgeEeYtYhK6eyRCfmNrQ+U2w1o/VRsRwwsLC6g4YENyEYm+1 yVQjPyEgo9KZah3tYtc8pxAGs3E6ulyHMhBZtHh1gWjSNyDTEBvYjcuKE1Javxmh dRRgIoymJG1f7b5zACkimDuvB5A4DOJ6pUvpvpad6Cv724J7ixA= =rvAi -----END PGP SIGNATURE----- Merge tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm DeviceTree updates for v5.17 To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe endpoint controller, as well as enables these for the FN960 device. The SDX65 5G platform is introduced, currently with definitions necessary to boot to a shell. The undocumented property "input-name" is dropped throughout the dts files, dwc3 nodes throughout gains more specific compatibles and lastly building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to its normal operation in 64-bit mode. * tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: Drop input-name property ARM: dts: qcom: sdx65: Add pincontrol node ARM: dts: qcom: Add SDX65 platform and MTP board support dt-bindings: arm: qcom: Document SDX65 platform and boards dt-bindings: clock: Add SDX65 GCC clock bindings ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32 ARM: dts: qcom: sdx55-t55: Enable IPA ARM: dts: qcom: sdx55-fn980: Enable IPA ARM: dts: qcom: sdx55-fn980: Enable PCIe EP ARM: dts: qcom: sdx55: Add support for PCIe EP ARM: dts: qcom: sdx55-fn980: Enable PCIE0 PHY ARM: dts: qcom: sdx55: Add support for PCIe PHY ARM: dts: qcom: update USB nodes with new platform specific compatible Link: https://lore.kernel.org/r/20211221042154.3621955-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
13ee75c7b5 |
Qualcomm driver updates for v5.17
This introduces RPM power-domain support for the SM8450, SM6125 and QCM2290 platforms. It them clean up the platform-based naming of the resources definitions throughout the RPMh PD driver. The last-level cache controller driver gains SM8350 support. The RPM sleep stats driver gains support for several older systems that had a slightly different memory layout for this information. The socinfo gains SM8450, SM6350 and SM7227 definitions. In addition to the DeviceTree binding updates related to these changes new compatibles was added to describe the SM8450 and the Kryo 780 CPU. Lastly a few typo and style fixes are introduced. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmHBUg4bHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FObUQAOCTBSbL/US0wCCUEHPq MScjFtPDAV88bJi9uRzi5lalwPd/3yPZu+XLcCV/CjRj6nlGAbua2EcogvMsM1Lj rgHZopKnnDOHEFII2ZZ3lyJN4EntvSGHtnm/i2Jd7n3nB52zBkuRpgn3mi32QWoL QmGECClAPFBlQi9P33yHDZ/XC8ZK1y982G+Pb8SD6guxmtGxXCm4SaZ4qwVya53s euBl+nT/snARPEwaqRoGIsvs+fH2BcoJbug19MLQ+3Q4K9ycxQkWalzcMsLM/EjT H1JGjoaHbTpNhyMmKDqN2jS0CkvoLiYOIvhAbqw6l2HluRkn8QhcDOJJ9RHl2oB/ EqYkK457F7smA0Z9vViuaEZJWfyPNt0z2c7zcpf73Iuk8cBM+48MUQ1UOwyvQh3c 8AeyyAkgyYBWv58h5rLDS2fqD+tWx4hz6tqxyYojsxYjQkyWRDU6540tGSDeVAt+ SUQ9qFXWyG7R5Z3GBVHi7ztXnkl6vYZUF05fhZrkpw9YrGlmu3wK/3Rcg9ZIECOg Q0UA/GQsqQtCqmzkRQsur/ljEbCrmtiB6JvG+7cnQIWPwcN/4Ho3wyfXvtzNvNki dMIpd+7NKkTaj1HUaH5qEnyO4szUpMoFfOrtqzlucH5dGG6fppY3svVWzuxLcbDy 8+b+/aDuWa7HUXpBbPaK7H7U =ovup -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHBy8wACgkQmmx57+YA GNmS3xAAhIPIdMWF76Gb7eQu0UWrbuACSl0Nkt5SRbRyjX0BHectf+ssXUzR6r2/ l8Uf2fkBYP5UWVUbWXlKPlmwmdQo/lAGYeHvi/lx3W4ORvIe6CRTeIS0q0DLPwSV H7iH8lnoFozIITt+6N+LhN9VME/Zpo8E/t2Wt47mkSkV/2hP6Adrgh5f4pz4KMcl hHQcAhi0/3DTEoGjczBDcTXMIt8nUPSwTnd1ktOaD0avRgKgiiLslvzjTxLMXRuw aDInx8uIMBswbEE0ZtG1aFrYZ54Y3DAm65n4aZfOPo3OlLjiosOqT1pvKWkpF/u1 OYcQzVEdUnEwZKB9BYzkTFVtK3ptE/5nNFg4HkclZATrqvEfQ6I3EbM9tvtY6GV+ BUUjxOthWq0Rnazd3BkOJvsepSndB1dOfxAunBk6m/r44shWWjLKGRI3jd+0QgW2 UVd0hy5pC28OZelGgSAU0PVQyHYl/82pRu7UCpHVaOg9mvuwgURChr7ddGi9XWVG cMChFAumH/hvnQrRavONPUqaTjP62hRkOqjA/bvc3jFuAgFWqvSrc+z1AvqKw4Uz 0ks+tjoHrQ839EZB0g/LDk7K8MDe8llvOk16gzqNxplQJe2WYaRZ9S0GD+3MC1Wz sSIyMsFLhfZJ2Z7TNOqLTPPW3jfoU3ntNzHUY8gCpTSh8DVkbtQ= =NlpZ -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.17 This introduces RPM power-domain support for the SM8450, SM6125 and QCM2290 platforms. It them clean up the platform-based naming of the resources definitions throughout the RPMh PD driver. The last-level cache controller driver gains SM8350 support. The RPM sleep stats driver gains support for several older systems that had a slightly different memory layout for this information. The socinfo gains SM8450, SM6350 and SM7227 definitions. In addition to the DeviceTree binding updates related to these changes new compatibles was added to describe the SM8450 and the Kryo 780 CPU. Lastly a few typo and style fixes are introduced. * tag 'qcom-drivers-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits) soc: qcom: rpmh-rsc: Fix typo in a comment soc: qcom: socinfo: Add SM6350 and SM7225 dt-bindings: arm: msm: Don't mark LLCC interrupt as required dt-bindings: firmware: scm: Add SM6350 compatible dt-bindings: arm: msm: Add LLCC for SM6350 soc: qcom: rpmhpd: Sort power-domain definitions and lists soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280 soc: qcom: rpmhpd: Rename rpmhpd struct names soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao soc: qcom: socinfo: add SM8450 ID soc: qcom: rpmhpd: Add SM8450 power domains dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding soc: qcom: smem: Update max processor count dt-bindings: arm: qcom: Document SM8450 SoC and boards dt-bindings: firmware: scm: Add SM8450 compatible dt-bindings: arm: cpus: Add kryo780 compatible soc: qcom: rpmpd: Add support for sm6125 dt-bindings: qcom-rpmpd: Add sm6125 power domains soc: qcom: aoss: constify static struct thermal_cooling_device_ops PM: AVS: qcom-cpr: Use div64_ul instead of do_div ... Link: https://lore.kernel.org/r/20211221040452.3620633-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Dmitry Baryshkov
|
22c755708c |
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
Add compatible and constants for the power domains exposed by the RPMH in the Qualcomm SM8450 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211201072745.3969077-6-vkoul@kernel.org |
||
Martin Botka
|
8712107740 |
dt-bindings: qcom-rpmpd: Add sm6125 power domains
Add dt-bindings for sm6125 SoC RPM Power Domains Signed-off-by: Martin Botka <martin.botka@somainline.org> [bjorn: Added compatible to binding as well] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211130212332.25401-1-martin.botka@somainline.org |
||
|
Arnd Bergmann
|
0fd319105f |
Samsung DTS ARM64 changes for v5.17
1. Add bindings for: Exynos USI, Samsung Galaxy A8 (2018) board, WinLink
E850-96 board and WinLink vendor prefix.
2. Add pinctrl definitions used for Exynos850.
3. Minor fixes and improvements.
4. Convert serial on ExynosAutov9 to new hierarchy where serial is part
of USI node.
-----BEGIN PGP SIGNATURE-----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=A5Of
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=qF6s
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.17
1. Add bindings for: Exynos USI, Samsung Galaxy A8 (2018) board, WinLink
E850-96 board and WinLink vendor prefix.
2. Add pinctrl definitions used for Exynos850.
3. Minor fixes and improvements.
4. Convert serial on ExynosAutov9 to new hierarchy where serial is part
of USI node.
* tag 'samsung-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
dt-bindings: arm: samsung: document jackpotlte board binding
dt-bindings: soc: samsung: Fix I2C clocks order in USI binding example
arm64: dts: exynos: convert serial_0 to USI on ExynosAutov9
dt-bindings: soc: samsung: Add Exynos USI bindings
arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7
Link: https://lore.kernel.org/r/20211220115530.30961-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
33f8b4862a |
i.MX arm64 device tree change for 5.17:
- New SoC support: i.MX8 ULP. - New board support: i.MX8MM/MN based TQMa8Mx boards, iMX8MN BSH SMM S2, i.MX8 ULP EVK. - A series from Adam Ford to enable Camera and USB support for imx8mm-beacon device. - Add overlays for various serdes protocols on LS1028A QDS board using different PHY cards. - A series from Biwen Li to update LS1028A devices around RTC, flextimer and PWM support. - A series from Joakim Zhang to update ENET/FEC suppport on i.MX8M devices. - A couple of changes from Lucas Stach to update nitrogen8-som Ethernet PHY and I2C1 pad configuration. - A series from Martin Kepplinger to split out a shared imx8mq-librem5-r3 dtsi for Librem5 devices. - Add cache descriptions for i.MX8 SoCs. - A series from Vladimir Oltean to update ls1028a-rdb device tree in order to share the DTS between Linux and U-Boot. - Random device addtion to various i.MX8 and LX2160A based devices. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9hc4UHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM5tZAf/chwOQUH6gwyc76vb2mzcMlYq4jPN vMxJZ6fJBf+QglOrGfSznl11SHNCGs+NBDvRkJt9JLKj1fHh/jUTZf5HCRnK62lH YB+w2XxlthufTPujkVXM10Dsx65Up67Mo3ZN5/3M6Fd+w/P8YUzPEL0jD2dm7CDM rKqe57kcJ6ZaJgASuPdVh51fwpmbCNOQZCRgg4Y+sunXzUVyjA/jOUaeQojg+m2e TTe80CH+3fugipWkotAa8ypxAJEbeEsPvVB711UxTY28rE2BqDkcPMyOiq+9HW+M AoqPeyeZffyJGwLblLCQTZzMEuWU9G87H+fda7b8sg7yFPvjefaj+4DbdA== =ARjB -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAm/QACgkQmmx57+YA GNk/4g/9GG9YYbOHzLDSit6I92eAwMhIxCE7ls2RrB/JBIi1v13qZ85YTPw9w1Bc klRXP46fI6dVl7R7t0Vt2zt5MpuNnKAMZsHQR+UvB/Zll4RC7n29NEpWyFW0i4Yv /G28Whmp1sQs8szrWwvOlxWMY3fSlQMKM4vrtJUU6Che5ec+PwgsRL2rWf5/cnJh E9HqQ3eJMyP8cdayRnlUCI8yWAdXHkeDQhl7Mu97eX4l7Ka2OkDseEZY+HgRmQSv Ee3X1EPxFHau9f842NtIwNz54Vdibfh+UHCzMeWOtDZXF8bhWVYp13joPNDM7AWM 0oYMh966t/JuU4cPCQxed61C9Laxg42TkCbfuU7dC5pqKlCdSZSKOmLe7c6vw3Vf IGQwVgMh8/c3oJAbbPqWz+kfCg3O2KNzA3MnsQuizoLEwa5R4msqtk6FZ5uqR6d/ RYL9eZKzeZWPXwth1KCEx+qLFWuRxC5cdK181Hc/Srm3bzNf/6vfCcReRCvlfOiE lU1kzHLOKtfUeWSEK3WFnWuTbU68NaH8rUZXpuTlV1kYEeBf/mD4aTOUW9hOh0v6 EYwpk2QYPBcUUYR2KC6gfyJTTwihn3FR8+RiJR+VFjlhNrNHbrNmp3Vo19yjgu/Y brbFPEitQPnvXdrGAIfck9vHhO9VJ3xygo9SMowGsaRuFLunW/0= =zQ1O -----END PGP SIGNATURE----- Merge tag 'imx-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree change for 5.17: - New SoC support: i.MX8 ULP. - New board support: i.MX8MM/MN based TQMa8Mx boards, iMX8MN BSH SMM S2, i.MX8 ULP EVK. - A series from Adam Ford to enable Camera and USB support for imx8mm-beacon device. - Add overlays for various serdes protocols on LS1028A QDS board using different PHY cards. - A series from Biwen Li to update LS1028A devices around RTC, flextimer and PWM support. - A series from Joakim Zhang to update ENET/FEC suppport on i.MX8M devices. - A couple of changes from Lucas Stach to update nitrogen8-som Ethernet PHY and I2C1 pad configuration. - A series from Martin Kepplinger to split out a shared imx8mq-librem5-r3 dtsi for Librem5 devices. - Add cache descriptions for i.MX8 SoCs. - A series from Vladimir Oltean to update ls1028a-rdb device tree in order to share the DTS between Linux and U-Boot. - Random device addtion to various i.MX8 and LX2160A based devices. * tag 'imx-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (56 commits) arm64: dts: imx8mp-evk: configure multiple queues on eqos arm64: dts: ls1028a-qds: add overlays for various serdes protocols arm64: dts: ls1028a-qds: enable lpuart1 arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus arm64: dts: ls1028a-rdb: enable pwm0 arm64: dts: ls1028a: add flextimer based pwm nodes arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source arm64: dts: ls1028a: Add PCIe EP nodes arm64: dts: lx2162a-qds: add interrupt line for RTC node arm64: dts: lx2162a-qds: support SD UHS-I and eMMC HS400 modes arm64: dts: lx2160a: enable usb3-lpm-capable for usb3 nodes arm64: dts: lx2160a-qds: Add mdio mux nodes arm64: dts: lx2160a: add optee-tz node arm64: dts: lx2160a-rdb: Add Inphi PHY node arm64: dts: imx8mm: don't assign PLL2 in SoC dtsi arm64: dts: nitrogen8-som: correct i2c1 pad-ctrl arm64: dts: nitrogen8-som: correct network PHY reset arm64: dts: imx8mn-bsh-smm-s2/pro: Add iMX8MN BSH SMM S2 boards arm64: dts: imx8mm/n: Remove the 'pm-ignore-notify' property arm64: dts: imx8ulp: add power domain entry for usdhc ... Link: https://lore.kernel.org/r/20211218071427.26745-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
990102a792 |
Devicetree changes for TI K3 platforms for v5.17 merge window:
* New Platforms: - J721s2 SoC, SoM and Common Processor Board support * New features: - CAN support on AM64 EVM and SK - TimeSync Router on AM64 * Fixes: - Correct d-cache-sets info on J7200 - Fix L2 cache-sets value for J721e/J7200/AM64 - Fixes for dtbs_check warnings wrt serdes_ln_ctrl node on J721e/J7200 - Disable McASP on IoT2050 board to fix dtbs_check warnings -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmG8nQoQHHZpZ25lc2hy QHRpLmNvbQAKCRDERh5FfJEW423oB/wMWRML3F6+LKGkDpm6Dme6oV24NzhnACBl CQ0me3NpQEq4QELPasRwc9E4WOLGCGtDS1HByCrpCELFI7ET9ebwgo7yxl9nvJm+ nzSGwWY9/n3wtXhEc68r0if12WRuu59YTrhf+Q5GNF6uh4iv5aSmAfdSQmUljER5 hs1mZVAQflbxhsG5XR+OUGUvxQZ6Uy8F0OjW++a+ci3QtmQ9y+FUCIMdeLMvXD4C efaWtFtselePPqN3AJMRddAgo/rbzXWBaX57LG8oMz4a223Ima7FpVB0sgzsnYh8 +qG1JqFC88SR9Prjp7n8oaBdopL+ZXOZvernLWonFIGvvodK57ZM =DYkC -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAmXgACgkQmmx57+YA GNlR3g/+MjiqccCspohN8BRhsOTpDtq7NBM+F/oqwKzr9sktpwWeMz6dI1hjPihz spyixzw10lcHdO3me1B8jOV2+Cek8zZzhDHK0tBXZU4AO+lNmgsjyxWs953TMcg8 eklBb3TpocHfGEuJSzPfTAD1B9QRB3Bl7kMztwE9uNKUCJiXCToIs63i/8QaCjIG kNzJOCdndw07h4Ms+6MTlDLbpivFnedU43YyrtYGCovg5tlv02B8452KpbfHAIUf MuuCAIYHm/ZAZa8aOfQ3ZsxwwXCYVu77uG14CTQKChOJeOZ9xzf5WFsRtY4EjJFW bixwAQ9ZxFuFm8vXPz5vHkNh0nDGdHV2LJ7SVCoFZ/zcxXROH8+ol9/XtHsaShRh C5+Ekz8GWvWnVCaeon53vzMXneVRoK6YvxtS1P87uuaM8IH3U8lktmHaJMlD/qdl mGLyJs4GRt3tKdqlLB3FvUb1tWSLSZ84fuRHVb/FXY9M/driZYgGymH7axTWJtSE m3rB2EMvbYWfdV69J8T0JSPmLwRY9lkJxSvnJulXB/J0yuvqHesrXoZHbiqxkZiM adYT/ub6a03yRwoCFowTtOfBGyHOG7SLwrdHQ5dam0dCHjc0SGgJZj+gnHWh0asC +/JMhePTxD1fH0UmElRHY1L1of6iWguWXTFgNZhHUxbCj/z+dSU= =R9bG -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt Devicetree changes for TI K3 platforms for v5.17 merge window: * New Platforms: - J721s2 SoC, SoM and Common Processor Board support * New features: - CAN support on AM64 EVM and SK - TimeSync Router on AM64 * Fixes: - Correct d-cache-sets info on J7200 - Fix L2 cache-sets value for J721e/J7200/AM64 - Fixes for dtbs_check warnings wrt serdes_ln_ctrl node on J721e/J7200 - Disable McASP on IoT2050 board to fix dtbs_check warnings * tag 'ti-k3-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arch: arm64: ti: Add support J721S2 Common Processor Board arm64: dts: ti: Add initial support for J721S2 System on Module arm64: dts: ti: Add initial support for J721S2 SoC dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2 dt-bindings: arm: ti: Add bindings for J721s2 SoC arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK arm64: dts: ti: k3-am64-main: Add support for MCAN arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes arm64: dts: ti: k3-j721e: Add support for MCAN nodes arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes arm64: dts: ti: k3-am65-mcu: Add Support for MCAN arm64: dts: ti: k3-am64-main: add timesync router node arm64: dts: ti: k3-j7200: Correct the d-cache-sets info arm64: dts: ti: k3-j721e: Fix the L2 cache sets arm64: dts: ti: k3-j7200: Fix the L2 cache sets arm64: dts: ti: k3-am642: Fix the L2 cache sets arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node arm64: dts: ti: k3-j721e: correct cache-sets info Link: https://lore.kernel.org/r/20211217172806.10023-2-vigneshr@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
b87cd3759d |
dt-bindings: Changes for v5.17-rc1
This contains a bunch of json-schema conversions for various Tegra- related DT bindings and additions for new SoC and board support. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmG8sRoTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoUpLD/9aTWMH3DhMh2uKpOOt8TOdNiZXLqec GLXFoA3jHNHxEcwOXU6or8Hg4ipZnYgN2tspu2qpI+OvgwsoZcJqu8WAfH+fS2vv 950OmjAdKBTQhiOO1eSo86Kq00orE6TdMQ3NfTUqEKKcjbiAruy+ojuDfFRoutP+ UCe7Vl8CMi++MFmvyKBLu2GoDKb2JoKtoabiCxNwchZH3acgWFMfxeLBWNBj6HqH W7h+uld9MTg1rEZ7P7ZGspiXh9Nzt8e3e2un7j24L0qDI+s8Ur4XOf+Fms4aAMXc Pbme+q4DaA4xcFXVd5kyAKK1f6kYNVNZBHjKMVuPR4zjK4vADAZ2SZ0hFc3pE7hB rZtjwp4TphuwGrwNoXE4koi04GZStwnvp/Wr4BlCSyycY2H1UxMHHgMDWLA4WVVw JM+9uvjvCe0oE7x6+l4usWMVJrQljWH3IU5w4SXyzowYu5cvbWFhqRieFcg8iDbF CnGJGorq6bKJExiIyWtiRR4+m1TGsBq2cNUb1A0qgUTrMq6O2R4AiqSe45wDYSlQ z1zON1LILctiQfyCM2vsDLOe4AEyitzQkRPS9zo7Jn6dPnf9k3knpTDdyDS7vU2A juR3JOTdHuZ6jNBu5ykJbr3EN54D9nXHEGEl5ToHkahXEpJIC5haQOkRYU+OxER0 C+gWIEJcroJkjA== =aSMg -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAlSQACgkQmmx57+YA GNkY/g//Wc6o+0wNZ8DBGSvI/3spHcNdSeIFwprmMJyBd1ho30kDL+jBW+5bYekT 5X7GC7E/GkbxfvePQkZtS5+qFFdOV5qtQdjLEf2bQc/RuErnwnLttLBTFQpuBNHh VFjB+KHkEGtGFjjJ6CCnz57M5m+4NBWpIBwtubEygWhopCAb6as/dvi3F6Gso4lq xUhRe7Gx7LiJeqJhQqhGTgLo50oBQOHbXsIKEMuwXDMuhsQnpWVq3srJPr6pfgZi Q4cgE7GTKCe2TE7wDk9wKB5ptK6hntXswN51tFEGZk/5PNjot+64LzIRQ47CjpGm nisGWyT86ksaVZnXZlRvynbedWasrXITL76ccadbF4vqZGe9G07kw5N+i/t05DeN TkvXSBe+4e6q6zAOzrUUCP59R7X+sgC8phYj8al8We7i+Prn5IX+a4Glm4wiOMVv n9j9yRr/YPDrLVDjmqIhESzSmq5IZucbuqi7CW+TeaKrILlMaYcWuxXdAd8H9Ite krT4RxSkM+DJCW0OGIpYH9EtynHpf1HGhlP05wmrSa+quWa8h7WBCS2D9lFk4RU3 1cqV1qHLqL+HctxP0LGS2ajT1sUwkgoshijNlknmlwQW+Wzqu56J1H/+toLrH1XK 20ZALOao6CN344n2A//XVOk0udBShg93KmvTLhv2HQ4SIK5Jlwg= =acJz -----END PGP SIGNATURE----- Merge tag 'tegra-for-5.17-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v5.17-rc1 This contains a bunch of json-schema conversions for various Tegra- related DT bindings and additions for new SoC and board support. * tag 'tegra-for-5.17-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (30 commits) media: dt: bindings: tegra-vde: Document OPP and power domain media: dt: bindings: tegra-vde: Convert to schema dt-bindings: host1x: Document Memory Client resets of Host1x, GR2D and GR3D dt-bindings: host1x: Document OPP and power domain properties dt-bindings: clock: tegra-car: Document new clock sub-nodes dt-bindings: ARM: tegra: Document Pegatron Chagall dt-bindings: ARM: tegra: Document ASUS Transformers dt-bindings: usb: tegra-xudc: Document interconnects and iommus properties dt-bindings: serial: Document Tegra234 TCU dt-bindings: serial: tegra-tcu: Convert to json-schema dt-bindings: thermal: tegra186-bpmp: Convert to json-schema dt-bindings: firmware: tegra: Convert to json-schema dt-bindings: tegra: pmc: Convert to json-schema dt-bindings: serial: 8250: Document Tegra234 UART dt-bindings: mmc: tegra: Document Tegra234 SDHCI dt-bindings: fuse: tegra: Document Tegra234 FUSE dt-bindings: fuse: tegra: Convert to json-schema dt-bindings: rtc: tegra: Document Tegra234 RTC dt-bindings: rtc: tegra: Convert to json-schema dt-bindings: mailbox: tegra: Document Tegra234 HSP ... Link: https://lore.kernel.org/r/20211217162253.1801077-3-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
9593bdfa1d |
Samsung SoC drivers changes for v5.17
1. Exynos ChipID: add Exynos7885 support.
2. Exynos PMU: add Exynos850 support.
3. Minor bindings cleanup.
4. Add Exynos USIv2 (Universal Serial Interface) driver. The USI block is
a shared IP block between I2C, UART/serial and SPI. Basically one has
to choose which feature the USI block will support and later the
regular I2C/serial/SPI driver will bind and work.
This merges also one commit with dt-binding headers from my dts64
pull request.
Together with a future serial driver change, this will break the ABI.
Affected: Serial on ExynosAutov9 SADK and out-of-tree ExynosAutov9 boards
Why: To properly and efficiently support the USI with new hierarchy
of USI-{serial,SPI,I2C} devicetree nodes.
Rationale:
Recently added serial and USI support was short-sighted and did not
allow to smooth support of other features (SPI and I2C). Adding
support for USI-SPI and USI-I2C would effect in code duplication.
Adding support for different USI versions (currently supported is
USIv2 but support for v1 is planned) would cause even more code
duplication and create a solution difficult to maintain.
Since USI-serial and ExynosAutov9 have been added recently, are
considered fresh development features and there are no supported
products using them, the code/solution is being refactored in
non-backwards compatible way. The compatibility is not broken yet.
It will be when serial driver changes are accepted.
The ABI break was discussed with only known users of ExynosAutov9 and
received their permission.
-----BEGIN PGP SIGNATURE-----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=2Ed8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pxdx
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers
Samsung SoC drivers changes for v5.17
1. Exynos ChipID: add Exynos7885 support.
2. Exynos PMU: add Exynos850 support.
3. Minor bindings cleanup.
4. Add Exynos USIv2 (Universal Serial Interface) driver. The USI block is
a shared IP block between I2C, UART/serial and SPI. Basically one has
to choose which feature the USI block will support and later the
regular I2C/serial/SPI driver will bind and work.
This merges also one commit with dt-binding headers from my dts64
pull request.
Together with a future serial driver change, this will break the ABI.
Affected: Serial on ExynosAutov9 SADK and out-of-tree ExynosAutov9 boards
Why: To properly and efficiently support the USI with new hierarchy
of USI-{serial,SPI,I2C} devicetree nodes.
Rationale:
Recently added serial and USI support was short-sighted and did not
allow to smooth support of other features (SPI and I2C). Adding
support for USI-SPI and USI-I2C would effect in code duplication.
Adding support for different USI versions (currently supported is
USIv2 but support for v1 is planned) would cause even more code
duplication and create a solution difficult to maintain.
Since USI-serial and ExynosAutov9 have been added recently, are
considered fresh development features and there are no supported
products using them, the code/solution is being refactored in
non-backwards compatible way. The compatibility is not broken yet.
It will be when serial driver changes are accepted.
The ABI break was discussed with only known users of ExynosAutov9 and
received their permission.
* tag 'samsung-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: keep SoC driver bindings together
soc: samsung: Add USI driver
dt-bindings: soc: samsung: Add Exynos USI bindings
soc: samsung: exynos-pmu: Add Exynos850 support
dt-bindings: samsung: pmu: Document Exynos850
soc: samsung: exynos-chipid: add Exynos7885 SoC support
soc: samsung: exynos-chipid: describe which SoCs go with compatibles
Link: https://lore.kernel.org/r/20211220115405.30434-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
87e1287614 |
i.MX drivers update for 5.17:
- A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add i.MX8MN display related domain support. - Add optional continuous burst clock support for imx-weim bus driver. - Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and MIX domain. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9dygUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM7+jwgAle7/Po7Qs0JVrUwkJOWAjNxveXjv keEC5o+svPOLIToX1lA+bY2CKlok2n6IIiEkpbgc+C+prTip0zJnJUFFHxuOeMkl +/EWTthCAddLwXCdmU6c5HSw8XJ9rkH3YDvd46GkPnZuUiZVVmTYkuZQ25qCbPpE f1kCg2RNVruZAOYHmMsoU+WMH3q40dvGSDVXbcHpNZ19qHooUyk/4jcXGlBJKXDo iGosWLdqMy0vbK4cWFzorPFyTpaF1qq/o7AppfexT1h0f6aLnuKnBA5JXY4y4bvd e+6EZ0VwvtdZBqMNaZLHqltCVA/Y0q2gXGryKUM6n7mGdv/LYictLHPudA== =WKrF -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAjj4ACgkQmmx57+YA GNlesQ/9HT8YKAUTsFRYbzKaK0tduZX9eFS8kIF6NlhTqD5IIYhwG4zZGhezRBdM Xt1DztCKqI5/okIn5mtHa/nPOoXd8mElivqt+z/rNIvdB+QkeVbCAOQvHUXeNS1F +sy8PTHLLGZNOGWGzKB4bFtJnc6yawwjz4EukG59cnC+AUePdo3DTT7Xnhf45j+j SSYdG2wgcQ5OW9okKov+AcoupFosrC3Zcuswf2lPcxOfZY0x6yalXXfmerRUZR+g JKTA3bFVLBG2o7nHcJp9ePh0K03+SfaaT5sSAbFm1DxL4hhtcPQJ2uq7I1kVBWKh 8gBAy5Q+dNNZI/OQxM5TGB3EiQ20qBEdkxDxW2bUwAuG+Qyazgv5gRp5doU7FQnP Kl2f3TkM6/KRJNT3RytesTBSynisC9b4BuzpgFtfCBjK4/LEZSzSG07KHhP+k3pT b0FWQlw9+Rvj/stChWZgVRC6G3ALi7NYf5NLrGhsKjEdrAYBHwoh8OniwI4NyqdK 14qWkPb9ctvh6J1IGQ7c2qG+iXSMc9oogG7dmb9Vas2RI/tMeEOJSWdmEY6TZbSP 40e3Wews2RlU+lT8291Kuq2Dyj0YbK7dZ38ymy9cVHKvixr5QUEHxkJzICcDPqPQ rLdy/VwoSSDqkgNGcdXDdestnEXK7xvhgl/u3zT5RkcxfYxA3Q0= =74GG -----END PGP SIGNATURE----- Merge tag 'imx-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers update for 5.17: - A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add i.MX8MN display related domain support. - Add optional continuous burst clock support for imx-weim bus driver. - Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and MIX domain. * tag 'imx-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled bus: imx-weim: optionally enable continuous burst clock soc: imx: gpcv2: keep i.MX8MM VPU-H1 bus clock active soc: imx: gpcv2: Synchronously suspend MIX domains Link: https://lore.kernel.org/r/20211218071427.26745-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Sam Protsenko
|
51b1a57294 |
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
All Exynos850 GPIO blocks can use EXYNOS5420_PIN_DRV* definitions, except GPIO_HSI block. Add pin drive strength definitions for GPIO_HSI block correspondingly. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211217161549.24836-6-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> |
||
|
Arnd Bergmann
|
527c71547d |
Renesas ARM DT updates for v5.17 (take two)
- Initial support for the R-Car S4-8 SoC on the Spider CPU and
BreakOut boards,
- MIPI DSI display support for the R-Car V3u SoC and the Falcon board
stack,
- Thermal and GPU support for the RZ/G2L SoC and the RZ/G2L SMARC EVK
development board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYbxhigAKCRCKwlD9ZEnx
cOG8AQCFiS+sBx/X7GiG6fshCBhGw4f+9+jsNl2ucQMmUe9YqAEA83HjBLSQ/DnP
h/VI9JfeGdcyTseWFJwXzm8XChcdWwI=
=sQeE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1udU
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.17 (take two)
- Initial support for the R-Car S4-8 SoC on the Spider CPU and
BreakOut boards,
- MIPI DSI display support for the R-Car V3u SoC and the Falcon board
stack,
- Thermal and GPU support for the RZ/G2L SoC and the RZ/G2L SMARC EVK
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: Fix pin controller node names
arm64: dts: renesas: rzg2l-smarc-som: Add vdd core regulator
arm64: dts: renesas: r9a07g044: Add Mali-G31 GPU node
arm64: dts: renesas: r9a07g044: Create thermal zone to support IPA
arm64: dts: renesas: r9a07g044: Add TSU node
arm64: dts: renesas: falcon-cpu: Add DSI display output
arm64: dts: renesas: r8a779a0: Add DSI encoders
arm64: dts: renesas: Add Renesas Spider boards support
arm64: dts: renesas: Add Renesas R8A779F0 SoC support
dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions
dt-bindings: power: Add r8a779f0 SYSC power domain definitions
arm64: dts: renesas: Fix thermal bindings
Link: https://lore.kernel.org/r/cover.1639736718.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
Adam Ford
|
b77beaaee1 |
dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
This adds the defines for the power domains provided by the DISP blk-ctrl. Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Emil Renner Berthing
|
3021114b3d |
dt-bindings: pinctrl: Add StarFive pinctrl definitions
Add definitons for pins and GPIO input, output and output enable signals on the StarFive JH7100 SoC. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> |
||
Geert Uytterhoeven
|
810e287e83 |
dt-bindings: reset: Add StarFive JH7100 reset definitions
Add all resets for the StarFive JH7100 reset controller. Based on work by Ahmad Fatoum for Barebox, with "JH7100_" prefixes added to all definitions. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> |
||
|
Geert Uytterhoeven
|
38bb8a7264 |
dt-bindings: clock: starfive: Add JH7100 clock definitions
Add all clock outputs for the StarFive JH7100 clock generator. Based on work by Ahmad Fatoum for Barebox, with "JH7100_" prefixes added to all definitions. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> |
||
Thierry Reding
|
c3859c1436 |
dt-bindings: memory: tegra: Add Tegra234 support
Document the variant of the memory controller and external memory controllers found on Tegra234 and add some memory client and SMMU stream ID definitions for use in device tree files. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
Mikko Perttunen
|
fc5e0e3762 |
dt-bindings: Update headers for Tegra234
Add a few more clocks that will be used in follow-up patches to enable more functionality on Tegra234. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
Vinod Koul
|
72a0ca203c |
dt-bindings: clock: Add SM8450 GCC clock bindings
Add device tree bindings for global clock controller on SM8450 SoCs. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211207114003.100693-2-vkoul@kernel.org |
||
Vamsi krishna Lanka
|
8f8ef3860d |
dt-bindings: clock: Add SDX65 GCC clock bindings
Add device tree bindings for global clock controller on SDX65 SOCs. Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/e15509b2b7c9b600ab38c5269d4fac609c077b5b.1638861860.git.quic_vamslank@quicinc.com |
||
Peng Fan
|
057ccd9db7 |
dt-bindings: power: imx8ulp: add power domain header file
Add i.MX8ULP power domain header file Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Aswath Govindraju
|
beba81faad |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2
Add pinctrl macros for J721S2 SoC. These macro definitions are similar to that of J721E, but adding new definitions to avoid any naming confusions in the soc dts files. checkpatch insists the following error exists: ERROR: Macros with complex values should be enclosed in parentheses However, we do not need parentheses enclosing the values for this macro as we do intend it to generate two separate values as has been done for other similar platforms. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211207080904.14324-3-a-govindraju@ti.com |
||
|
Sam Protsenko
|
e522ae91b8 |
dt-bindings: soc: samsung: Add Exynos USI bindings
Add constants for choosing USIv2 configuration mode in device tree. Those are further used in USI driver to figure out which value to write into SW_CONF register. Also document USIv2 IP-core bindings. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211204195757.8600-2-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> |
||
Yoshihiro Shimoda
|
81c1655823 |
dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car S4-8 (R8A779F0) SoC. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20211201073308.1003945-4-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> |
||
|
Yoshihiro Shimoda
|
500daa0e6b |
dt-bindings: power: Add r8a779f0 SYSC power domain definitions
Add power domain indices for R-Car S4-8 (r8a779f0). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20211201073308.1003945-3-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> |
||
Samuel Holland
|
71b597ef5d
|
dt-bindings: clock: sunxi: Export CLK_DRAM for devfreq
The MBUS node needs to reference the CLK_DRAM clock, as the MBUS hardware implements memory dynamic frequency scaling using this clock. Export this clock for SoCs which will be getting a devfreq driver. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211118031841.42315-2-samuel@sholland.org |
||
Shawn Guo
|
2475fcfbe4 |
dt-bindings: power: rpmpd: Add QCM2290 support
Add compatible and constants for the power domains exposed by the QCM2290 RPM. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211108134442.30051-3-shawn.guo@linaro.org |
||
Paul Cercueil
|
c4a11bf423 |
dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
Tidy up a bit the tree, by prefixing all include/dt-bindings/clock/ files related to Ingenic SoCs with 'ingenic,'. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211016133322.40771-1-paul@crapouillou.net |
||
|
Linus Torvalds
|
3a9b0a46e1 |
- Remove Drivers
- Remove support for TI TPS80031/TPS80032 PMICs
- New Device Support
- Add support for Magnetic Reader to TI AM335x
- Add support for DA9063_EA to Dialog DA9063
- Add support for SC2730 PMIC to Spreadtrum SC27xx
- Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI
- Add support for lots of new PMICS in QCom SPMI PMIC
- Add support for ADC to Diolan DLN2
- New Functionality
- Add support for Power Off to Rockchip RK817
- Fix-ups
- Simplify Regmap passing to child devices; hi6421-spmi-pmic
- SPDX licensing updates; ti_am335x_tscadc
- Improve error handling; ti_am335x_tscadc
- Expedite clock search; ti_am335x_tscadc
- Generic simplifications; ti_am335x_tscadc
- Use generic macros/defines; ti_am335x_tscadc
- Remove unused code; ti_am335x_tscadc, cros_ec_dev
- Convert to GPIOD; wcd934x
- Add namespacing; ti_am335x_tscadc
- Restrict compilation to relevant arches; intel_pmt
- Provide better description/documentation; exynos_lpass
- Add SPI device ID table; altera-a10sr, motorola-cpcap, sprd-sc27xx-spi
- Change IRQ handling; qcom-pm8xxx
- Split out I2C and SPI code; arizona
- Explicitly include used headers; altera-a10sr
- Convert sysfs show() function to; sysfs_emit
- Standardise *_exit() and *_remove() return values; mc13xxx, stmpe, tps65912
- Trivial (style/spelling/whitespace) fixups; ti_am335x_tscadc, qcom-spmi-pmic,
max77686-private
- Device Tree fix-ups; ti,am3359-tscadc, samsung,s2mps11, samsung,s2mpa01,
samsung,s5m8767, brcm,misc, brcm,cru, syscon, qcom,tcsr,
xylon,logicvc, max77686, x-powers,ac100, x-powers,axp152,
x-powers,axp209-gpio, syscon, qcom,spmi-pmic
- Bug Fixes
- Balance refcounting (get/put); ti_am335x_tscadc, mfd-core
- Fix IRQ trigger type; sec-irq, max77693, max14577
- Repair off-by-one; altera-sysmgr
- Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C
-----BEGIN PGP SIGNATURE-----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=SJ7N
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Removed Drivers:
- Remove support for TI TPS80031/TPS80032 PMICs
New Device Support:
- Add support for Magnetic Reader to TI AM335x
- Add support for DA9063_EA to Dialog DA9063
- Add support for SC2730 PMIC to Spreadtrum SC27xx
- Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI
- Add support for lots of new PMICS in QCom SPMI PMIC
- Add support for ADC to Diolan DLN2
New Functionality:
- Add support for Power Off to Rockchip RK817
Fix-ups:
- Simplify Regmap passing to child devices in hi6421-spmi-pmic
- SPDX licensing updates in ti_am335x_tscadc
- Improve error handling in ti_am335x_tscadc
- Expedite clock search in ti_am335x_tscadc
- Generic simplifications in ti_am335x_tscadc
- Use generic macros/defines in ti_am335x_tscadc
- Remove unused code in ti_am335x_tscadc, cros_ec_dev
- Convert to GPIOD in wcd934x
- Add namespacing in ti_am335x_tscadc
- Restrict compilation to relevant arches in intel_pmt
- Provide better description/documentation in exynos_lpass
- Add SPI device ID table in altera-a10sr, motorola-cpcap,
sprd-sc27xx-spi
- Change IRQ handling in qcom-pm8xxx
- Split out I2C and SPI code in arizona
- Explicitly include used headers in altera-a10sr
- Convert sysfs show() function to in sysfs_emit
- Standardise *_exit() and *_remove() return values in mc13xxx,
stmpe, tps65912
- Trivial (style/spelling/whitespace) fixups in ti_am335x_tscadc,
qcom-spmi-pmic, max77686-private
- Device Tree fix-ups in ti,am3359-tscadc, samsung,s2mps11,
samsung,s2mpa01, samsung,s5m8767, brcm,misc, brcm,cru, syscon,
qcom,tcsr, xylon,logicvc, max77686, x-powers,ac100,
x-powers,axp152, x-powers,axp209-gpio, syscon, qcom,spmi-pmic
Bug Fixes:
- Balance refcounting (get/put) in ti_am335x_tscadc, mfd-core
- Fix IRQ trigger type in sec-irq, max77693, max14577
- Repair off-by-one in altera-sysmgr
- Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C"
* tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (95 commits)
mfd: simple-mfd-i2c: Select MFD_CORE to fix build error
mfd: tps80031: Remove driver
mfd: max77686: Correct tab-based alignment of register addresses
mfd: wcd934x: Replace legacy gpio interface for gpiod
dt-bindings: mfd: qcom: pm8xxx: Add pm8018 compatible
mfd: dln2: Add cell for initializing DLN2 ADC
mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo
mfd: qcom-spmi-pmic: Document ten more PMICs in the binding
mfd: qcom-spmi-pmic: Sort compatibles in the driver
mfd: qcom-spmi-pmic: Sort the compatibles in the binding
mfd: janz-cmoio: Replace snprintf in show functions with sysfs_emit
mfd: altera-a10sr: Include linux/module.h
mfd: tps65912: Make tps65912_device_exit() return void
mfd: stmpe: Make stmpe_remove() return void
mfd: mc13xxx: Make mc13xxx_common_exit() return void
dt-bindings: mfd: syscon: Add samsung,exynosautov9-sysreg compatible
mfd: altera-sysmgr: Fix a mistake caused by resource_size conversion
dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema
dt-bindings: mfd: syscon: Add rk3368 QoS register compatible
mfd: arizona: Split of_match table into I2C and SPI versions
...
|
||
|
Linus Torvalds
|
5af06603c4 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina: - support for Nintendo Switch Pro Controllers and Joy-Cons (Daniel J. Ogorchock) - support for new revision of the NitroKey U2F device firmware (Andrej Shadura) - LED handling improvements for Sony Playstation5 controllers (Roderick Colenbrander) - support for Apple 2021 Magic Keyboard (Alex Henrie) - other assorted code cleanups and new device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (41 commits) HID: nintendo: fix -Werror build HID: playstation: require multicolor LED functionality HID: u2fzero: properly handle timeouts in usb_submit_urb HID: u2fzero: clarify error check and length calculations HID: u2fzero: Support NitroKey U2F revision of the device HID: wacom: Make use of the helper function devm_add_action_or_reset() HID: wacom: Shrink critical section in `wacom_add_shared_data` HID: nintendo: prevent needless queueing of the rumble worker HID: nintendo: ratelimit subcommands and rumble HID: nintendo: improve rumble performance and stability HID: nintendo: add IMU support HID: nintendo: add support for reading user calibration HID: nintendo: add support for charging grip HID: nintendo: set controller uniq to MAC HID: nintendo: reduce device removal subcommand errors HID: nintendo: patch hw version for userspace HID mappings HID: nintendo: send subcommands after receiving input report HID: nintendo: improve subcommand reliability HID: nintendo: add rumble support HID: nintendo: add home led support ... |
||
|
Linus Torvalds
|
5a1bcbd965 |
Pin control changes for the v5.16 kernel cycle
Core changes:
- Add infrastructure for per-parent interrupt data to support
the Apple pin controller.
New drivers:
- New combined pin control and GPIO driver for the Apple SoC.
This is used in all modern Apple silicon such as the M1
laptops but also in at least recent iPhone variants.
- New subdriver for the Qualcomm SM6350
- New subdriver for the Qualcomm QCM2290
- New subdriver for the Qualcomm PM6350
- New subdriver for the Uniphier NX1
- New subdriver for the Samsung ExynosAutoV9
- New subdriver for the Mediatek MT7986
- New subdriver for the nVidia Tegra194
Improvements:
- Improve power management in the Mediatek driver.
- Improvements to the Renesas internal consistency checker.
- Convert the Rockchip pin control device tree bindings to YAML.
- Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO
driver to use hierarchical interrupts.
- Convert the Qualcomm PMIC MPP device tree bindings to YAML.
-----BEGIN PGP SIGNATURE-----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=4Ms6
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The most interesting aspect is that we now have initial support for
the Apple pin controller as used in the M1 laptops and the iPhones
which is a step forward for using Linux efficiently on this Apple
silicon.
Core changes:
- Add infrastructure for per-parent interrupt data to support the
Apple pin controller.
New drivers:
- New combined pin control and GPIO driver for the Apple SoC. This is
used in all modern Apple silicon such as the M1 laptops but also in
at least recent iPhone variants.
- New subdriver for the Qualcomm SM6350
- New subdriver for the Qualcomm QCM2290
- New subdriver for the Qualcomm PM6350
- New subdriver for the Uniphier NX1
- New subdriver for the Samsung ExynosAutoV9
- New subdriver for the Mediatek MT7986
- New subdriver for the nVidia Tegra194
Improvements:
- Improve power management in the Mediatek driver.
- Improvements to the Renesas internal consistency checker.
- Convert the Rockchip pin control device tree bindings to YAML.
- Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO driver to
use hierarchical interrupts.
- Convert the Qualcomm PMIC MPP device tree bindings to YAML"
* tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (55 commits)
pinctrl: add pinctrl/GPIO driver for Apple SoCs
dt-bindings: pinctrl: Add apple,npins property to apple,pinctrl
dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrl
gpio: Allow per-parent interrupt data
pinctrl: tegra: Fix warnings and error
pinctrl: intel: Kconfig: Add configuration menu to Intel pin control
pinctrl: tegra: Use correct offset for pin group
pinctrl: core: fix possible memory leak in pinctrl_enable()
pinctrl: bcm2835: Allow building driver as a module
pinctrl: equilibrium: Fix function addition in multiple groups
pinctrl: tegra: Add pinmux support for Tegra194
pinctrl: tegra: include lpdr pin properties
pinctrl: mediatek: add support for MT7986 SoC
dt-bindings: pinctrl: update bindings for MT7986 SoC
pinctrl: microchip sgpio: use reset driver
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding
dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells
pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chip
pinctrl: qcom: spmi-mpp: hardcode IRQ counts
pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chip
...
|
||
|
Linus Torvalds
|
5c904c66ed |
Char/Misc driver update for 5.16-rc1
Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage,
reviewed and acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by
the hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in
arm64 for allmodconfig, but that change is on its way through
the drm tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPX2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUUgCbB4EKysgLuXYdjUalZDx+vvZO4k0AniS14O4k
F+2dVSZ5WX6wumUzCaA6
=bXQM
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
|
||
|
Linus Torvalds
|
7ddb58cb0e |
The usual collection of clk driver updates and new driver additions. In
terms of lines it's mainly Qualcomm and Mediatek code, supporting
various SoCs and their multitude of clk controllers.
New Drivers:
- GCC and RPMcc support for Qualcomm QCM2290 SoCs
- GCC support for Qualcomm MSM8994/MSM8992 SoCs
- LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
- Support for Mediatek MT8195 SoCs
- Initial clock driver for the Exynos850 SoC
- Add i.MX8ULP clock driver and related bindings
Updates:
- Clock power management for new SAMA7G5 SoC
- Updates to the master clock driver and sam9x60-pll to be able to use
cpufreq-dt driver and avoid overclocking of CPU and MCK0 domains while
changing the frequency via DVFS
- Use ARRAY_SIZE in qcom clk drivers
- Remove some impractical fallback parent names in qcom clk drivers
- Make Mediatek clk drivers tristate
- Refactoring of the CPU clock code and conversion of Samsung Exynos5433
CPU clock driver to the platform driver
- A few conversions to devm_platform_ioremap_resource()
- Updates of the Samsung Kconfig help text
- Update video path realted clocks for Amlogic meson8
- Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L
- Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U
- Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N
- Remove unused helpers from i.MX specific clock header
- Rework all i.MX clk based helpers to use clk_hw based ones
- Rework i.MX gate/mux/divider wrappers
- Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
- Update i.MX pllv4 and composite clocks to support i.MX8ULP
- Disable i.MX7ULP composite clock during initialization
- Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
- Disable the i.MX pfd when set pfdv2 clock rate
- Add support for i.MX8ULP in pfdv2
- Add the pcc reset controller support on i.MX8ULP
- Fix the build break when clk-imx8ulp is built as module
- Move csi_sel mux to correct base register in i.MX6UL clock drivr
- Fix csi clk gate register in i.MX6UL clock driver
- Fix build bug making CLK_IMX8ULP select MXC_CLK
- Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U
- Add Ethernet clocks on Renesas RZ/G2L
- Move Rockchip to use module_platform_probe
- Enable usage of Coresight related clocks on Rockchip rk3399
-----BEGIN PGP SIGNATURE-----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=Is+O
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The usual collection of clk driver updates and new driver additions.
In terms of lines it's mainly Qualcomm and Mediatek code, supporting
various SoCs and their multitude of clk controllers.
New Drivers:
- GCC and RPMcc support for Qualcomm QCM2290 SoCs
- GCC support for Qualcomm MSM8994/MSM8992 SoCs
- LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
- Support for Mediatek MT8195 SoCs
- Initial clock driver for the Exynos850 SoC
- Add i.MX8ULP clock driver and related bindings
Updates:
- Clock power management for new SAMA7G5 SoC
- Updates to the master clock driver and sam9x60-pll to be able to
use cpufreq-dt driver and avoid overclocking of CPU and MCK0
domains while changing the frequency via DVFS
- Use ARRAY_SIZE in qcom clk drivers
- Remove some impractical fallback parent names in qcom clk drivers
- Make Mediatek clk drivers tristate
- Refactoring of the CPU clock code and conversion of Samsung
Exynos5433 CPU clock driver to the platform driver
- A few conversions to devm_platform_ioremap_resource()
- Updates of the Samsung Kconfig help text
- Update video path realted clocks for Amlogic meson8
- Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L
- Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U
- Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N
- Remove unused helpers from i.MX specific clock header
- Rework all i.MX clk based helpers to use clk_hw based ones
- Rework i.MX gate/mux/divider wrappers
- Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
- Update i.MX pllv4 and composite clocks to support i.MX8ULP
- Disable i.MX7ULP composite clock during initialization
- Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
- Disable the i.MX pfd when set pfdv2 clock rate
- Add support for i.MX8ULP in pfdv2
- Add the pcc reset controller support on i.MX8ULP
- Fix the build break when clk-imx8ulp is built as module
- Move csi_sel mux to correct base register in i.MX6UL clock drivr
- Fix csi clk gate register in i.MX6UL clock driver
- Fix build bug making CLK_IMX8ULP select MXC_CLK
- Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U
- Add Ethernet clocks on Renesas RZ/G2L
- Move Rockchip to use module_platform_probe
- Enable usage of Coresight related clocks on Rockchip rk3399"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (170 commits)
clk: use clk_core_get_rate_recalc() in clk_rate_get()
clk: at91: sama7g5: set low limit for mck0 at 32KHz
clk: at91: sama7g5: remove prescaler part of master clock
clk: at91: clk-master: add notifier for divider
clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
clk: at91: clk-master: fix prescaler logic
clk: at91: clk-master: mask mckr against layout->mask
clk: at91: clk-master: check if div or pres is zero
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
clk: at91: pmc: add sama7g5 to the list of available pmcs
clk: at91: clk-master: improve readability by using local variables
clk: at91: clk-master: add register definition for sama7g5's master clock
clk: at91: sama7g5: add securam's peripheral clock
clk: at91: pmc: execute suspend/resume only for backup mode
clk: at91: re-factor clocks suspend/resume
clk: ux500: Add driver for the reset portions of PRCC
dt-bindings: clock: u8500: Rewrite in YAML and extend
clk: composite: Use rate_ops.determine_rate when also a mux is available
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
...
|
||
|
Linus Torvalds
|
d461e96cd2 |
ARM: SoC drivers for 5.16
These are all the driver updates for SoC specific drivers. There
are a couple of subsystems with individual maintainers picking up
their patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this
tree this time. There are only minor changes, but they depend
on other tegra driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process.
This depends on a small sound driver change that is included
here as well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains
a mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for
the "Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed
BMCs, something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better suspend/resume
support
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
allwinner, broadcom, and omap.
-----BEGIN PGP SIGNATURE-----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=tUuj
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
|
||
|
Linus Torvalds
|
ae45d84fc3 |
ARM: SoC DT updates for v5.16
This is a rather large update for the ARM devicetree files, after a few
quieter releases, with 775 total commits and 47 branches pulled into
this one. There are 5 new SoC types plus some minor variations, and
a total of 60 new machines, so I'm limiting the summary to the main
noteworthy items:
- Apple M1 gain support for PCI and pinctrl, getting a bit
closer to a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as
well as SM7225, 11 new smartphones, and three additional
Chromebooks, and improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version
of their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a
number of improvements for the recently added SAMA7 family.
The LAN966 SoC that was added in the platform code does not
have dts files yet. Two board files are added for the older
at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600
as BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new
development boards using RK3328/RK3399/RK3566, and one
Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the
new MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based
ebook readers, and three additional development boards, which
is notably less than their usual additions, but they also gain
improvements to their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with
a reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many
updates for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi
boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for
more hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub
home automation controllers, along with changes to other
machines
- Rob Herring continues his work on fixing dtc warnings all over
the tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc
-----BEGIN PGP SIGNATURE-----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=jp4P
-----END PGP SIGNATURE-----
Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
|
||
Stephen Boyd
|
e2ceaa867d |
Merge branches 'clk-composite-determine-fix', 'clk-allwinner', 'clk-amlogic' and 'clk-samsung' into clk-next
* clk-composite-determine-fix:
clk: composite: Use rate_ops.determine_rate when also a mux is available
clk: composite: Also consider .determine_rate for rate + mux composites
* clk-allwinner:
clk: sunxi: sun8i-apb0: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-ar100: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-apb0-gates: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-apb0: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80-usb: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80-de: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-r40: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-de2: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-a83t: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun50i-h6: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun50i-a64: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: clk-mod0: Make use of the helper function devm_platform_ioremap_resource()
dt-bindings: clocks: Fix typo in the H6 compatible
clk: sunxi-ng: Use a separate lock for each CCU instance
clk: sunxi-ng: Prevent unbinding CCUs via sysfs
clk: sunxi-ng: Unregister clocks/resets when unbinding
clk: sunxi-ng: Add machine dependency to A83T CCU
clk: sunxi-ng: mux: Remove unused 'reg' field
* clk-amlogic:
clk: meson: meson8b: Make the video clock trees mutable
clk: meson: meson8b: Initialize the HDMI PLL registers
clk: meson: meson8b: Add the HDMI PLL M/N parameters
clk: meson: meson8b: Add the vid_pll_lvds_en gate clock
clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel
clk: meson: meson8b: Export the video clocks
* clk-samsung:
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
clk: samsung: add support for CPU clocks
clk: samsung: Introduce Exynos850 clock driver
dt-bindings: clock: Document Exynos850 CMU bindings
dt-bindings: clock: Add bindings definitions for Exynos850 CMU
clk: samsung: clk-pll: Implement pll0831x PLL type
clk: samsung: clk-pll: Implement pll0822x PLL type
clk: samsung: s5pv210-audss: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos5433: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos4412-isp: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos-audss: Make use of devm_platform_ioremap_resource()
|
||
|
Stephen Boyd
|
8d741ecd46 |
Merge branches 'clk-imx', 'clk-ux500' and 'clk-debugfs' into clk-next
* clk-imx: (21 commits) clk: imx: Make CLK_IMX8ULP select MXC_CLK clk: imx: imx6ul: Fix csi clk gate register clk: imx: imx6ul: Move csi_sel mux to correct base register clk: imx: Fix the build break when clk-imx8ulp build as module clk: imx: Add the pcc reset controller support on imx8ulp clk: imx: Add clock driver for imx8ulp clk: imx: Update the pfdv2 for 8ulp specific support clk: imx: disable the pfd when set pfdv2 clock rate clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp clk: imx: disable i.mx7ulp composite clock during initialization clk: imx: Update the compsite driver to support imx8ulp clk: imx: Update the pllv4 to support imx8ulp dt-bindings: clock: Add imx8ulp clock support clk: imx: Rework imx_clk_hw_pll14xx wrapper clk: imx: Rework all imx_clk_hw_composite wrappers clk: imx: Rework all clk_hw_register_divider wrappers clk: imx: Rework all clk_hw_register_mux wrappers clk: imx: Rework all clk_hw_register_gate2 wrappers clk: imx: Rework all clk_hw_register_gate wrappers clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones ... * clk-ux500: clk: ux500: Add driver for the reset portions of PRCC dt-bindings: clock: u8500: Rewrite in YAML and extend * clk-debugfs: clk: use clk_core_get_rate_recalc() in clk_rate_get() |
||
|
Stephen Boyd
|
a379e16ab8 |
Merge branches 'clk-qcom', 'clk-mtk', 'clk-versatile' and 'clk-doc' into clk-next
- Use ARRAY_SIZE in qcom clk drivers - Remove some impractical fallback parent names in qcom clk drivers - GCC and RPMcc support for Qualcomm QCM2290 SoCs - GCC support for Qualcomm MSM8994/MSM8992 SoCs - LPASSCC and CAMCC support for Qualcomm SC7280 SoCs - Support for Mediatek MT8195 SoCs - Make Mediatek clk drivers tristate * clk-qcom: (44 commits) clk: qcom: gdsc: enable optional power domain support clk: qcom: videocc-sm8250: use runtime PM for the clock controller clk: qcom: dispcc-sm8250: use runtime PM for the clock controller dt-bindings: clock: qcom,videocc: add mmcx power domain dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain clk: qcom: gcc-sc7280: Drop unused array clk: qcom: camcc: Add camera clock controller driver for SC7280 dt-bindings: clock: Add YAML schemas for CAMCC clocks on SC7280 clk: qcom: Add lpass clock controller driver for SC7280 dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280 clk: qcom: Kconfig: Sort the symbol for SC_LPASS_CORECC_7180 clk: qcom: mmcc-sdm660: Add hw_ctrl flag to venus_core0_gdsc clk: qcom: mmcc-sdm660: Add necessary CXCs to venus_gdsc clk: qcom: gcc-msm8994: Use ARRAY_SIZE() for num_parents clk: qcom: gcc-msm8994: Add proper msm8992 support clk: qcom: gcc-msm8994: Add modem reset clk: qcom: gcc-msm8994: Remove the inexistent GDSC_PCIE clk: qcom: gcc-msm8994: Add missing clocks clk: qcom: gcc-msm8994: Add missing NoC clocks clk: qcom: gcc-msm8994: Fix up SPI QUP clocks ... * clk-mtk: (28 commits) clk: mediatek: Export clk_ops structures to modules clk: mediatek: support COMMON_CLK_MT6779 module build clk: mediatek: support COMMON_CLK_MEDIATEK module build clk: composite: export clk_register_composite clk: mediatek: Add MT8195 apusys clock support clk: mediatek: Add MT8195 imp i2c wrapper clock support clk: mediatek: Add MT8195 wpesys clock support clk: mediatek: Add MT8195 vppsys1 clock support clk: mediatek: Add MT8195 vppsys0 clock support clk: mediatek: Add MT8195 vencsys clock support clk: mediatek: Add MT8195 vdosys1 clock support clk: mediatek: Add MT8195 vdosys0 clock support clk: mediatek: Add MT8195 vdecsys clock support clk: mediatek: Add MT8195 scp adsp clock support clk: mediatek: Add MT8195 mfgcfg clock support clk: mediatek: Add MT8195 ipesys clock support clk: mediatek: Add MT8195 imgsys clock support clk: mediatek: Add MT8195 ccusys clock support clk: mediatek: Add MT8195 camsys clock support clk: mediatek: Add MT8195 infrastructure clock support ... * clk-versatile: clk: versatile: hide clock drivers from non-ARM users clk: versatile: Rename ICST to CLK_ICST clk: versatile: clk-icst: Support 'reg' in addition to 'vco-offset' for register address dt-bindings: clock: arm,syscon-icst: Use 'reg' instead of 'vco-offset' for VCO register address * clk-doc: dt-bindings: clk: fixed-mmio-clock: Convert to YAML |
||
Roderick Colenbrander
|
61177c088a |
leds: add new LED_FUNCTION_PLAYER for player LEDs for game controllers.
Player LEDs are commonly found on game controllers from Nintendo and Sony to indicate a player ID across a number of LEDs. For example, "Player 2" might be indicated as "-x--" on a device with 4 LEDs where "x" means on. This patch introduces LED_FUNCTION_PLAYER1-5 defines to properly indicate player LEDs from the kernel. Until now there was no good standard, which resulted in inconsistent behavior across xpad, hid-sony, hid-wiimote and other drivers. Moving forward new drivers should use LED_FUNCTION_PLAYERx. Note: management of Player IDs is left to user space, though a kernel driver may pick a default value. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
||
Linus Walleij
|
f2b883bbdd |
dt-bindings: clock: u8500: Rewrite in YAML and extend
This rewrites the ux500/u8500 clock bindings in YAML schema and extends them with the PRCC reset controller. The bindings are a bit idiomatic but it just reflects their age, the ux500 platform was used as guinea pig for early device tree conversion of platforms in 2015. The new subnode for the reset controller follows the pattern of the old bindings and adds a node with reset-cells for this. Cc: devicetree@vger.kernel.org Cc: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210921184803.1757916-1-linus.walleij@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
Srinivas Kandagatla
|
e3008b7ccb
|
ASoC: dt-bindings: rename q6afe.h to q6dsp-lpass-ports.h
move all LPASS audio ports defines from q6afe.h to q6dsp-lpass-ports.h as these belong to LPASS IP. Also this move helps in reusing this header across multiple audio frameworks on Qualcomm Audio DSP. This patch is split out of the dt-bindings patch to enable easy review. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211026111655.1702-4-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Mark Brown
|
21b178b8e9 |
v5.15-rc1 + 20210927135559.738-[23456]-srinivas.kandagatla@linaro.org
This immutable branch is based on v5.15-rc1 and contains the following patches extending the existig APR driver to also implement GPR: 20210927135559.738-2-srinivas.kandagatla@linaro.org 20210927135559.738-3-srinivas.kandagatla@linaro.org 20210927135559.738-4-srinivas.kandagatla@linaro.org 20210927135559.738-5-srinivas.kandagatla@linaro.org 20210927135559.738-6-srinivas.kandagatla@linaro.org -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmFSiE4bHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FNV0P/1R/t0Dfj+vJg8SarPPg u/2LbLBAhFfn0WoVJgdYmpW3lG3kxG+z7I4s5gDdKCrKeyj//jJReRVwkgG4QxNs NgSAd24o/afb4/jcNTlmbhIyo+k9gsU5rxw7AynwRkLOyfNG71sytEH/1LvzBj1F X5AVQlzEnTsclVlwK3n9ZSm3cKiwgyFnqBLZs+e199FVjJgFGk6WDPplWPo50+hz pYImAVPGRbwSGH6cR2M4JSwpU/GJzFAAZf5Y8GrEBQVyhiQeKvYV7UNPjbNt15tv qI8Xfa5xbgAFunRC6GsjpaffTmCzHJKYgikchbIKre906IYBLwDHTnxvtXXDgBVe Zrd0jFQIrtuHseLQkvaEiVuuzmFibm/atdMUWCyncdunl2fuwTS60hCG+mRd7Pz2 B85HmcAfS7LTu+dkn4doG4zVHO/JVpYr2eZExb1wxY0Kyz+5KDsESqUCB+7c6wya rGqsC+LX8l0MjunxSJbZUcuQLLcaFN9AXJTB6a0gPk+VLZH7EutkG98SonYU07w/ Wff0bwVQWk3I4QHf0NaS5Ikbcx8KAv1ZaqcUaL2pPYNtIamkiyJdH6f+4C0q+K6n aMcLNLzaRcVayHO88SG3XpDLNc+cR2f/rehAkghxXJ8jhdtV5HSb5HLKgu+Lf8q4 hEBzBQLYeRFJM1TuaZL02aXw =r7vf -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF3+W4ACgkQJNaLcl1U h9C+DQf7Bxzz7xjGv5AFyZ8eZbAx0LnTBp9SytON2gh5mxWGUCI0kxSdnEd/ot9u PUhWMf7192kQw4qmkZArdtKiaxhZdKZvXZ0kTfyoTvcR4o9fdgWtMUla5QhBVzAu UgZbTH91wDt4P68cYzLrhG8gFlagzSwRT8WF4imJmcJsehPq22Nz70tK5tSePZko KcbnpkqYV19CQRJsEKXBivAptpE/oAQJBSoYVw/gkizqrznNGI2cqWBl+krGOdBW zI+CZbzuAwTi9xNu3tmlcgPDGxOHYFVU7aIy2w/ENNRsAbWgFThcO25pWBKROtKc 45uC5fj24R6cCCyuygwFJuLoeRy31Q== =ts3p -----END PGP SIGNATURE----- Merge tag '20210927135559.738-6-srinivas.kandagatla@linaro.org' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into v11_20211026_srinivas_kandagatla_asoc_qcom_add_audioreach_support for audioreach support v5.15-rc1 + 20210927135559.738-[23456]-srinivas.kandagatla@linaro.org This immutable branch is based on v5.15-rc1 and contains the following patches extending the existig APR driver to also implement GPR: 20210927135559.738-2-srinivas.kandagatla@linaro.org 20210927135559.738-3-srinivas.kandagatla@linaro.org 20210927135559.738-4-srinivas.kandagatla@linaro.org 20210927135559.738-5-srinivas.kandagatla@linaro.org 20210927135559.738-6-srinivas.kandagatla@linaro.org |
||
Swapnil Jakhade
|
f9aec1648d |
dt-bindings: phy: cadence-torrent: Add clock IDs for derived and received refclk
Add clock IDs for derived and received reference clock output. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210922123735.21927-3-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
Srinivasa Rao Mandadapu
|
de6e9190a8
|
ASoC: dt-bindings: lpass: add binding headers for digital codecs
Add header defining for lpass internal digital codecs rx,tx and va dai node id's. Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/1633670491-27432-1-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Miquel Raynal
|
59139ada4a |
clk: ti: am43xx: Add clkctrl data for am43xx ADC1
Declare ADC1 clkctrl which feeds the magnetic-reader/ADC1 hardware module. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211015081506.933180-2-miquel.raynal@bootlin.com |
||
|
Arnd Bergmann
|
353bbb3d07 |
i.MX DT bindings update for 5.16:
- Various board compatible addition: NXP S32G2, LS1021A TSN, Toradex Colibri i.MX6ULL, LX2160A BlueBox 3 boards. - Toradex board and module compatibles clean-up. - Convert fsl-linflexuart bindings to json-schema format and add S32G2 compatible. - Add bindings and defines for i.MX8MM VPU and DISP blk-ctrl. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFqx00UHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM6yMgf/RrQ/w3oGlI6lPJS+JiP2FGJwjzwS ICtYUInxDCHD4sdKUYT7ZIT4CGBbNabX/7jGVxwFyrbp1YkTp4s4aV1zgqGYdLAh 6/8X3MsYT9unYLWGh0jSyWJatYvj6kkKWQB95g3nuvUzJcxIEP3/e7JFngEebCCV F++VN4y4b+B3GZbZuiGEOQEvjkG+kC776+Lhm1HNnq3nzcCfJyXqE4tQiSPJOyrJ aSocMW27GLpBW7VyUJOs6vHgWPeSZzHLar/iwWBNXQaq7qlb2tILd3f1PxPuiBqy tYO3Xm6D1O0LdnxcdV0XkyRSC83sjeRCVD1KzfBO/cJUXwJmT+EsrkikmA== =HEuA -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFwEtoACgkQmmx57+YA GNnpYg/9FmaMO8cUF4FQGW1+HVZfxtv65emlTlZhC3DHhWKZxPY7AXR1ZKrZJmDr kukBUpKkRYg7bg1/GgaEjpqlpAQNTXsCQhLUGPE9tHrSM3RWZziowZd6GFUcAnXi u8MSQts4uVNuzWcUz1Oe60Ru7UrXuoh+s9emVeCcpEZgDLuil6vtioJJgYDqoMWH dS9EzD/B0V5j3gIQa2PHUeWVaPUEvn5NwmLGB0deIBKctPyH+mNPSsaaYvgXRwN6 BO/IvgScVFLc5R3sZurGNYW6hmBhxHu+FLe026faKsg/yZCU4MzFb4Loso1Yt8lW y9QX6PHtsW9Ya5L2+ExfPmSd/x/T9z0snLvjhE2TWYPFBbA/HT8UQ9To5l5l1HC9 rDCTbHTWXkSRI42Bzbhbm+RrifHAQWmJq1+hjzgrPtvyT0vTeSjes/l4ct2XllfX YZWS32sMi2EiMwD0PFBx965vXaIz8EHtuvP8b1xTX6qlJWJdLUsEjR8nPw6PW2NZ QSMzUk9I2zPRRImSoI1w5zvCxrAv94rtGXOJFlUs4HFD9XzyIW6Vr/kjEHdLjQgn T5cOpC7O5ZuZPAKFp2MT+hb8f3vBcmCLEZau6wmyXV7xtHxSqaGAFuunZQgzM5Kg fkmdSIMYS/Ayj9PQUb/sjOJB0+9/XgbpYSeSsb+olg0wLMm5Swo= =uZE/ -----END PGP SIGNATURE----- Merge tag 'imx-bindings-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings update for 5.16: - Various board compatible addition: NXP S32G2, LS1021A TSN, Toradex Colibri i.MX6ULL, LX2160A BlueBox 3 boards. - Toradex board and module compatibles clean-up. - Convert fsl-linflexuart bindings to json-schema format and add S32G2 compatible. - Add bindings and defines for i.MX8MM VPU and DISP blk-ctrl. * tag 'imx-bindings-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: add ls1021a-tsn board dt-bindings: power: imx8mm: add defines for DISP blk-ctrl domains dt-bindings: soc: add binding for i.MX8MM DISP blk-ctrl dt-bindings: power: imx8mm: add defines for VPU blk-ctrl domains dt-bindings: soc: add binding for i.MX8MM VPU blk-ctrl dt-bindings: arm: fsl: Add E70K02 based ebook readers dt-bindings: arm: fsl: add toradex,colibri-imx6ull-emmc dt-bindings: arm: fsl: clean-up all toradex boards/modules dt-bindings: serial: fsl-linflexuart: add compatible for S32G2 dt-bindings: serial: fsl-linflexuart: convert to json-schema format dt-bindings: arm: fsl: add NXP S32G2 boards dt-bindings: arm: fsl: document the LX2160A BlueBox 3 boards Link: https://lore.kernel.org/r/20211016140138.1603-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Taniya Das
|
a764e1ed50 |
dt-bindings: clock: Add YAML schemas for CAMCC clocks on SC7280
The camera clock controller clock provider have a bunch of generic properties that are needed in a device tree. Add the CAMCC clock IDs for camera client to request for the clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1633567425-11953-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |