Add a reserved memory node for the VGA memory. Add the XDMA engine node,
enable it, and point it's memory region to the VGA memory.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add a reserved memory node for the VGA memory. Add the XDMA engine node,
enable it, and point it's memory region to the VGA memory.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the PCI-E root complex reset, correct the pcie-device property, and
add the Aspeed SCU interrupt controller include.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Correct the pcie-device property, and add the Aspeed SCU interrupt
controller include.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The current pin muxing scheme muxes GPIO_1 pad for USB_OTG_ID
because of which when card is inserted, usb otg is enumerated
and the card is never detected.
[ 64.492645] cfg80211: failed to load regulatory.db
[ 64.492657] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
[ 76.343711] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 76.349742] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 2
[ 76.388862] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 76.396650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 76.405412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 76.412763] usb usb2: Product: EHCI Host Controller
[ 76.417666] usb usb2: Manufacturer: Linux 5.8.0-rc1-next-20200618 ehci_hcd
[ 76.424623] usb usb2: SerialNumber: ci_hdrc.0
[ 76.431755] hub 2-0:1.0: USB hub found
[ 76.435862] hub 2-0:1.0: 1 port detected
The TRM mentions GPIO_1 pad should be muxed/assigned for card detect
and ENET_RX_ER pad for USB_OTG_ID for proper operation.
This patch fixes pin muxing as per TRM and is tested on a
i.Core 1.5 MX6 DL SOM.
[ 22.449165] mmc0: host does not support reading read-only switch, assuming write-enable
[ 22.459992] mmc0: new high speed SDHC card at address 0001
[ 22.469725] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
[ 22.478856] mmcblk0: p1 p2
Fixes: 6df11287f7 ("ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
esdhc0 is connected to an eMMC, so it is safe to pass the "no-sdio"/"no-sd"
properties.
esdhc1 is wired to a standard SD socket, so pass the "no-sdio" property.
Signed-off-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 0672d22a19 ("ARM: dts: imx: Fix the AR803X phy-mode") fixed the
phy-mode for fec1, but missed to fix it for the fec2 node.
Fix fec2 to also use "rgmii-id" as the phy-mode.
Cc: <stable@vger.kernel.org>
Fixes: 0672d22a19 ("ARM: dts: imx: Fix the AR803X phy-mode")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 0672d22a19 ("ARM: dts: imx: Fix the AR803X phy-mode") fixed the
phy-mode for fec1, but missed to fix it for the fec2 node.
Fix fec2 to also use "rgmii-id" as the phy-mode.
Cc: <stable@vger.kernel.org>
Fixes: 0672d22a19 ("ARM: dts: imx: Fix the AR803X phy-mode")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the AR8035 datasheet:
"When using crystal, the clock is generated internally after power is
stable. For a reliable power on reset, suggest to keep asserting the reset
low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms
requirement is satisfied."
Pass the 'reset-assert-us' property to describe such requirement.
While at it, use the 'reset-gpios' property inside the the mdio
node instead of the deprecated usage of 'phy-reset-gpios'.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Soeren Moch <smoch@web.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx6q-tbs2910 has an Atheros AR8035 Ethernet PHY at address 4.
The AR8035 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin.
Improve the Ethernet representation by adding an mdio node with such
information.
This fixes an Ethernet regression in U-Boot as U-Boot AR803X driver now
expects the 'qca,clk-out-frequency' property to be passed via
device tree.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Soeren Moch <smoch@web.de>
Tested-by: Soeren Moch <smoch@web.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the AR8031 datasheet:
"When using crystal, clock is generated internally after the power is
stable. In order to get reliable power-on-reset, it is recommended to
keep asserting the reset low signal long enough (10 ms) to ensure the
clock is stable and clock-to-reset (1 ms) requirement is satisfied."
Pass the 'reset-assert-us' property to describe such requirement.
While at it, use the 'reset-gpios' property inside the the mdio
node instead of the deprecated usage of 'phy-reset-gpios'.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Soeren Moch <smoch@web.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx6qdl-sabresd has an Atheros AR8031 Ethernet PHY at address 1.
The AR8031 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin.
Improve the Ethernet representation by adding an mdio node with such
information.
An advantage of adding the mdio node is that the AR8031 initialization
code in the mx6sabresd board file in U-Boot can totally be removed.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Soeren Moch <smoch@web.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and
fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The marvell PHY reg-init registers for the D-Link DNS-327L are wrong.
Currently the first field is used to set the page 2, but this is
pointless. The usage is not correct, and we are setting the wrong
registers.
Fix it.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Connect the voltage regulator of vbus to the otg connector.
Depending on the current mode this is enabled (in "host" mode")
or disabled (in "peripheral" mode). The regulator must be updated
if the controller is configured in "otg" mode and the status changes
between "host" and "peripheral".
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200707101214.2301768-1-michael@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rock Pi N8 is a Rockchip RK3288 based SBC, which has
- VMARC RK3288 SOM (as per SMARC standard) from Vamrs.
- Compatible carrier board from Radxa.
VAMRC RK3288 SOM need to mount on top of radxa dalang
carrier board for making Rock Pi N8 SBC.
So, add initial support for Rock Pi N8 by including rk3288,
rk3288 vamrc-som and raxda dalang carrier board dtsi files.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200715083418.112003-8-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
VMARC RK3288 SOM is a standard SMARC SOM design with
Rockchip RK3288 SoC, which is designed by Vamrs.
Specification:
- Rockchip RK3288
- PMIC: RK808
- eMMC: 16GB/32GB/64GB
- SD slot
- 2xUSB-2.0, 1xUSB3.0
- USB-C for power supply
- Ethernet
- HDMI, MIPI-DSI/CSI, eDP
Add initial support for VMARC RK3288 SOM, this would use
with associated carrier board.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200715083418.112003-7-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Some of gmac, sdmmc node properties are common across rk3288 and
rk3399pro SOM's so move them into Carrier dtsi.
Chosen node is specific to rk3399pro configure SBC, so move it into
RockPI N10 dts.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200715083418.112003-5-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Supply regulators are common across different variants of vmarc SOM's
since the Type C power controller IC is part of the carrier board.
So, move the supply regulators into carrier board dtsi.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200715083418.112003-4-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
I2C nodes and associated slave devices defined in Carrier board
are specific to rk3399pro vmrac SOM.
So, move them into SOM dtsi.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200715083418.112003-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This time there are a number of actual code fixes, plus
a small set of device tree issues getting addressed:
- Renesas:
- one defconfig cleanup to allow a later Kconfig change
- Intel socfpga:
- enable QSPI devices on some machines
- fix DTC validation warnings
- TI OMAP:
- Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module
driver
- A regression fix for ti-sysc no-idle handling that caused issues
compared to earlier platform data based booting
- A fix for memory leak for omap_hwmod_allocate_module
- Fix d_can driver probe for am437x
- NXP i.MX
- A couple of fixes on i.MX platform device registration code to stop
the use of invalid IRQ 0.
- Fix a regression seen on ls1021a platform, caused by commit
52102a3ba6 ("soc: imx: move cpu code to drivers/soc/imx").
- Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.
- Amlogic Meson
- misc DT fixes
- SoC ID fixes to detect all chips correctly
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=Xlng
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master
Pull ARM SoC fixes from Arnd Bergmann:
"This time there are a number of actual code fixes, plus a small set of
device tree issues getting addressed:
Renesas:
- one defconfig cleanup to allow a later Kconfig change
Intel socfpga:
- enable QSPI devices on some machines
- fix DTC validation warnings
TI OMAP:
- Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target
module driver
- A regression fix for ti-sysc no-idle handling that caused issues
compared to earlier platform data based booting
- A fix for memory leak for omap_hwmod_allocate_module
- Fix d_can driver probe for am437x
NXP i.MX:
- A couple of fixes on i.MX platform device registration code to
stop the use of invalid IRQ 0.
- Fix a regression seen on ls1021a platform, caused by commit
52102a3ba6 ("soc: imx: move cpu code to drivers/soc/imx").
- Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.
Amlogic Meson:
- misc DT fixes
- SoC ID fixes to detect all chips correctly"
* tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema
ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema
arm64: dts: stratix10: increase QSPI reg address in nand dts file
arm64: dts: stratix10: add status to qspi dts node
arm64: dts: agilex: add status to qspi dts node
ARM: dts: Fix dcan driver probe failed on am437x platform
ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module
arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST
soc: imx: check ls1021a
ARM: imx: Remove imx_add_imx_dma() unused irq_err argument
ARM: imx: Provide correct number of resources when registering gpio devices
ARM: dts: imx6qdl-gw551x: fix audio SSI
bus: ti-sysc: Do not disable on suspend for no-idle
bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk
bus: ti-sysc: Fix wakeirq sleeping function called from invalid context
ARM: dts: meson: Align L2 cache-controller nodename with dtschema
arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency
arm64: dts: meson: add missing gxl rng clock
soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's
This adds device trees for the ASUS Google Nexus 7 and Acer Iconia Tab
A500. In addition there are a slew of fixes to existing device trees in
preparation for validating the DTBs against json-schema.
-----BEGIN PGP SIGNATURE-----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=oFYm
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.9-rc1
This adds device trees for the ASUS Google Nexus 7 and Acer Iconia Tab
A500. In addition there are a slew of fixes to existing device trees in
preparation for validating the DTBs against json-schema.
* tag 'tegra-for-5.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (38 commits)
ARM: tegra: Add device-tree for ASUS Google Nexus 7
ARM: tegra: Add device-tree for Acer Iconia Tab A500
ARM: tegra: Add HDMI supplies on Nyan boards
ARM: tegra: Add missing DSI controller on Tegra30
ARM: tegra: Add i2c-bus subnode for DPAUX controllers
ARM: tegra: The Tegra30 SDHCI is not backwards-compatible
ARM: tegra: The Tegra30 DC is not backwards-compatible
ARM: tegra: Remove spurious comma from node name
ARM: tegra: Add parent clock to DSI output
ARM: tegra: Use standard names for SRAM nodes
ARM: tegra: seaboard: Use standard battery bindings
ARM: tegra: Use standard names for LED nodes
ARM: tegra: Use numeric unit-addresses
ARM: tegra: medcom-wide: Remove extra panel power supply
ARM: tegra: Use proper unit-addresses for OPPs
ARM: tegra: Add missing clock-names for SDHCI controllers
ARM: tegra: Fix order of XUSB controller clocks
ARM: tegra: Add #reset-cells to Tegra124 memory controller
ARM: tegra: Add missing panel power supplies
ARM: tegra: Add micro-USB A/B port on Jetson TK1
...
Link: https://lore.kernel.org/r/20200717161300.1661002-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The device node for the FIFO-buffered Serial Interface sound node lacks
the "clocks" property, as the DTS file didn't describe any clocks yet at
its introduction.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200519075525.24742-1-geert+renesas@glider.be
Fix dtschema validator warnings like:
l2-cache: $nodename:0: 'l2-cache' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
A series of changes to configure IPU and DSP remoteproc for omap4 & 5.
And a change to configure the default mux for am335x-pocketbeagle, and
a change to use https for external links.
-----BEGIN PGP SIGNATURE-----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=IlyP
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
More dts changes for omaps for v5.9
A series of changes to configure IPU and DSP remoteproc for omap4 & 5.
And a change to configure the default mux for am335x-pocketbeagle, and
a change to use https for external links.
* tag 'omap-for-v5.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
Replace HTTP links with HTTPS ones: OMAP DEVICE TREE SUPPORT
ARM: dts: omap5-uevm: Add watchdog timers for IPU and DSP
ARM: dts: omap4-panda-common: Add watchdog timers for IPU and DSP
ARM: dts: omap5-uevm: Add system timers to DSP and IPU
ARM: dts: omap5-uevm: Add CMA pools and enable IPU & DSP
ARM: dts: omap5: Add aliases for rproc nodes
ARM: dts: omap5: Add DSP and IPU nodes
ARM: dts: omap4-panda-common:: Add system timers to DSP and IPU
ARM: dts: omap4-panda-common: Add CMA pools and enable IPU & DSP
ARM: dts: omap4: Add aliases for rproc nodes
ARM: dts: omap4: Add IPU DT node
ARM: dts: omap4: Update the DSP node
ARM: dts: omap5: Add timer_sys_ck clocks for timers
ARM: dts: omap4: Add timer_sys_ck clocks for timers
ARM: dts: am335x-pocketbeagle: set default mux for gpio pins
Link: https://lore.kernel.org/r/pull-1594838111-649880@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A series of changes to drop remaining USB platform data for omap4/5,
and am4, and dra7.
And a patch to drop AES platform data for omap3.
-----BEGIN PGP SIGNATURE-----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=4iOb
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.9/ti-sysc-drop-pdata-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Drop more legacy platform data for omaps for v5.9
A series of changes to drop remaining USB platform data for omap4/5,
and am4, and dra7.
And a patch to drop AES platform data for omap3.
* tag 'omap-for-v5.9/ti-sysc-drop-pdata-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Drop legacy platform data for omap5 usb host
ARM: OMAP2+: Drop legacy platform data for omap4 usb
ARM: OMAP2+: Drop legacy platform data for dra7 dwc3
ARM: OMAP2+: Drop legacy platform data for omap5 dwc3
ARM: OMAP2+: Drop legacy platform data for am4 dwc3
bus: ti-sysc: Add missing quirk flags for usb_host_hs
ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2
Link: https://lore.kernel.org/r/pull-1594838111-649880@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few fixes for issues noticed during testing:
- Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module
driver
- A regression fix for ti-sysc no-idle handling that caused issues
compared to earlier platform data based booting
- A fix for memory leak for omap_hwmod_allocate_module
- Fix d_can driver probe for am437x
-----BEGIN PGP SIGNATURE-----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=ekbH
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.8/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.8-rc cycle
Few fixes for issues noticed during testing:
- Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module
driver
- A regression fix for ti-sysc no-idle handling that caused issues
compared to earlier platform data based booting
- A fix for memory leak for omap_hwmod_allocate_module
- Fix d_can driver probe for am437x
* tag 'omap-for-v5.8/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix dcan driver probe failed on am437x platform
ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module
bus: ti-sysc: Do not disable on suspend for no-idle
bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk
bus: ti-sysc: Fix wakeirq sleeping function called from invalid context
Link: https://lore.kernel.org/r/pull-1594840100-132735@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A couple of fixes on i.MX platform device registration code to stop
the use of invalid IRQ 0.
- Fix a regression seen on ls1021a platform, caused by commit
52102a3ba6 ("soc: imx: move cpu code to drivers/soc/imx").
- Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8Nxv4UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4fIAf/SKUzFbQ/INaU98yW8zONnZVzD/jI
3oTnBP87YJRNiyrLF1lWLs55vfnhum7yXJZXdMbwP55fdJKVaV4StePGz9Sh4Gba
4COHOF3XvF73b4kpcCQEr1U+Y0KHEfMbkwONmerk9ZkRThY2uqcRsdj4br+XA9eU
19ppWdOYZHMjegPu0KuxJlevZJDO6s9I4MCKFWmGgWhanLeGXXd2xtJEgqTWtTnS
EFjOFdBQF+5yd0VY/j6WHBDHWa/fXhDFoAO8Wc5LMCP3VybZdciIi4mN8y0UZoNG
Q5UnBvpYMCqrBwVlyqgeDtJUvYd+33dHqsRbU3KN8yBpRnyHupR9UvcFLA==
=+Gmy
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.8, round 2:
- A couple of fixes on i.MX platform device registration code to stop
the use of invalid IRQ 0.
- Fix a regression seen on ls1021a platform, caused by commit
52102a3ba6 ("soc: imx: move cpu code to drivers/soc/imx").
- Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.
* tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: check ls1021a
ARM: imx: Remove imx_add_imx_dma() unused irq_err argument
ARM: imx: Provide correct number of resources when registering gpio devices
ARM: dts: imx6qdl-gw551x: fix audio SSI
Link: https://lore.kernel.org/r/20200714145649.GP15718@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are few hardware variants of NVIDIA Tegra30-based Nexus 7 device:
1. WiFi-only (named Grouper)
2. GSM (named Tilapia)
3. Using Maxim PMIC (E1565 board ID)
4. Using Ti PMIC (PM269 board ID)
This patch adds device-trees for known and tested variants.
Link: https://wiki.postmarketos.org/wiki/Google_Nexus_7_2012_(asus-grouper)
Tested-by: Pedro Ângelo <pangelo@void.io>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Tested-by: Zack Pearsall <zpearsall@yahoo.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix dtschema validator warnings like:
l2-cache@fffff000: $nodename:0:
'l2-cache@fffff000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Fixes: 475dc86d08 ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The SOR controller needs the AVDD I/O and VDD HDMI PLL supplies in order
to operate correctly. Make sure to specify them for Nyan boards.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra30 has a DSI controller, although it is never used on any of the
devices supported by the upstream Linux kernel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DPAUX controller device tree bindings require the bus to have an
i2c-bus subnode to distinguish between I2C clients and pinmux groups.
Signed-off-by: Thierry Reding <treding@nvidia.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
