This reverts commit eaf2d2f689.
The commit eaf2d2f689 ("ARM: dts: exynos: add input clock to CMU in
Exynos4412 Odroid") breaks probing of usb3503 USB hub on Odroid U3.
It changes the order of clock drivers probe: the clkout (Exynos PMU)
driver is probed before the main clk-exynos4 driver. The clkout driver
on Exynos4412 depends on clk-exynos4 but it does not support deferred
probe, therefore this dependency and changed probe order causes probe
failure.
The usb3503 USB hub on Odroid U3 on the other hand requires clkout
clock. This can be seen in logs:
[ 5.007442] usb3503 0-0008: unable to request refclk (-517)
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200921174818.15525-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Krzysztof Kozlowski to fix missing PMIC's interrupt
line pull-up for i.MX8MM and i.MX8MN boards.
- Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board
to fix the choppy Bluetooth audio sound.
- Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN
device tree.
- Fix the endianness setting of RCPM node on Layerscape SoCs.
- Add the missing dma-coherent property for qoriq-fman device to improve
the performance.
- Fix the Ethernet PHY address on imx6q-prti6q board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl+fStkUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6UJggAgRnnMfVrvpZqZSYlj3CirW4jOeeo
oxkh8L3XcvOh5f1StI15879a93E5fq4CLoVUda5vdWJLO8Q0pl5VGJsTfzNpekAY
mswq8ratwKragLOX8FhSr/YLICoF6qLmIDn0EtAuOwLrcii4i5pgLqj0t/5MQm9U
NyAbb/nYZWWm2S8szOaB6+OfYbXxV9YHMFkFL9ZetppS/ezYq3UNq2i//aTBB33z
wFhqt8+scuT3cikdtFumb+vbMMYtUcGfJxkgLEoQz3P53WL1w0jzJXQ47egWI6/d
16zEUavTk9WUKcWS8knY8KKToVaU6GKIr+JLUOczWOhMPUtxANsLvLOmjQ==
=M32F
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.10, 3rd round:
- A series from Krzysztof Kozlowski to fix missing PMIC's interrupt
line pull-up for i.MX8MM and i.MX8MN boards.
- Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board
to fix the choppy Bluetooth audio sound.
- Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN
device tree.
- Fix the endianness setting of RCPM node on Layerscape SoCs.
- Add the missing dma-coherent property for qoriq-fman device to improve
the performance.
- Fix the Ethernet PHY address on imx6q-prti6q board.
* tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6q-prti6q: fix PHY address
arm64: dts imx8mn: Remove non-existent USB OTG2
arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio
arm64: dts: fsl: DPAA FMan DMA operations are coherent
arm64: dts: fsl: fix endianness issue of rcpm
arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up
arm64: dts: imx8mn-ddr4-evk: fix missing PMIC's interrupt line pull-up
arm64: dts: imx8mn-var-som: fix missing PMIC's interrupt line pull-up
arm64: dts: imx8mm-evk: fix missing PMIC's interrupt line pull-up
arm64: dts: imx8mm-beacon-som: fix missing PMIC's interrupt line pull-up
arm64: dts: imx8mm-var-som: fix missing PMIC's interrupt line pull-up
Link: https://lore.kernel.org/r/20201030151821.GA28266@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add initial version of device tree for Facebook Galaxy100 (AST2400) BMC.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201111232330.30843-5-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Simplify the Wedge100 device tree by using the common dtsi.
In addition this enables the second firmware flash, and turns on the
"i2c-mux-idle-disconnect" flag for I2C switch 7-0070.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201111232330.30843-4-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Simplify the Wedge40 device tree by using the common dtsi.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201111232330.30843-3-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This common descirption is included by all Facebook AST2400 Network BMC
platforms to minimize duplicated device entries across Facebook Network
BMC device trees.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201111232330.30843-2-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Clocks and thermal blocks are part of the CRU ("Clock and Reset Unit" or
"Central Resource Unit").
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Now that we have a pin controller, use that instead of manuplating the
mdio/mdc pins directly. i.e. we no longer require the mdio-mii-mux
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
BCM47094 version of pinmux uses different compatible and supports MDIO
pinmux pins. Hence, use the correct compatible string and defines the
MDIO pins group.
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This router has dual paritions to store trx firmware image and
dual partitions for nvram. The second one in each of these cases acts
as a backup store.
When tested with OpenWrt, the default partition parser causes two issues:
1. It labels both nvram partitions as nvram. In factory, second one is
labeled devinfo.
2. It parses second trx image and tries to create second 'linux' partition
and fails with - cannot create duplicate 'linux' partition
The following patch works around both of these issues.
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In accordance with the Generic xHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-xhci"-compatible nodes are
correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add ports 5 and 7 which are connected to gmac cores 1 & 2.
These will be disabled for now.
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add GPIO line names for AMD EthanolX customer reference board.
It populates AST2500 GPIO lines (A0-A7 to AC0-AC7) with AMD EthanolX
designated names.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
Link: https://lore.kernel.org/r/20201111132133.1253-1-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Use hyphens instead of underscores in the MFC reserved memory node names
which is expected by naming convention, multiple dtschema files and
pointed out by dtc W=2 builds.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-5-krzk@kernel.org
Use hyphens instead of underscores in the Exynos5250 and Exynos542x node
names which is expected by naming convention, multiple dtschema files
and pointed out by dtc W=2 builds.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-4-krzk@kernel.org
Use hyphens instead of underscores in the Exynos4210 and Exynos4412 node
names which is expected by naming convention, multiple dtschema files
and pointed out by dtc W=2 builds. Use also generic "ppmu" node name
for PPMU nodes to match Devicetree specification.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-2-krzk@kernel.org
Use hyphens instead of underscores in the Exynos3250 node names which is
expected by naming convention, multiple dtschema files and pointed out
by dtc W=2 builds. Use also generic "ppmu" node name for PPMU nodes to
match Devicetree specification.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-1-krzk@kernel.org
This patch adds an 'interconnects' property to Exynos4412 DTS in order to
declare the interconnect path used by the mixer. Please note that the
'interconnect-names' property is not needed when there is only one path in
'interconnects', in which case calling of_icc_get() with a NULL name simply
returns the right path.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20201104103657.18007-7-s.nawrocki@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This patch adds the following properties for Exynos4412 interconnect
bus nodes:
- interconnects: to declare connections between nodes in order to
guarantee PM QoS requirements between nodes,
- #interconnect-cells: required by the interconnect framework,
- samsung,data-clk-ratio: which allows to specify minimum data clock
frequency corresponding to requested bandwidth for each bus.
Note that #interconnect-cells is always zero and node IDs are not
hardcoded anywhere.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20201104103657.18007-6-s.nawrocki@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add section for kionix kxtf9.
Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
[tony@atomide.com: removed extra header from description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Remove xt894 specific things from motorola-mapphone-common.dtsi and add
them to omap4-droid4-xt894.dts and omap4-droid-bionic-xt875.dts as
applicable.
Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
[tony@atomide.com: shortened subject, wrapped description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
The node names for devices using the pwm-leds driver follow a certain
naming scheme (now). Parent node name is not enforced, but recommended
by DT project.
DTC arch/arm/boot/dts/omap3-beagle-xm.dt.yaml
CHECK arch/arm/boot/dts/omap3-beagle-xm.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-beagle-xm.dt.yaml: pwmleds: 'pmu_stat' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml
CHECK arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml: pwmleds: 'pmu_stat' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-alto35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-alto35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-alto35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-palo35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-palo35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-palo35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-palo43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-palo43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-palo43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-summit.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-summit.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-summit.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-tobi.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-tobi.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-tobi.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap4-kc1.dt.yaml
CHECK arch/arm/boot/dts/omap4-kc1.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap4-kc1.dt.yaml: pwmleds: 'green', 'orange' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap4-sdp.dt.yaml
CHECK arch/arm/boot/dts/omap4-sdp.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap4-sdp.dt.yaml: pwmleds: 'charging', 'kpad' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml
CHECK arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml: pwmleds: 'charging', 'kpad' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Syonpsys IP cores are supposed to be defined with "snps" vendor-prefix.
Use it instead of the deprecated "synopsys" one.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The wl271 bluetooth uart is connected to uart2.
Setup a serdev uart child and separate bluetooth and uart2 pinmux
from wl12xx pinmux to better group the pins and muxes.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The pinmux control register offset passed to OMAP4_IOPAD is odd.
Fixes: ab9a13665e ("ARM: dts: pandaboard: add gpio user button")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The SPI chip selects are represented as:
cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
, which means that they are used in GPIO function instead of native
SPI mode.
Fix the IOMUX for the chip select 1 to use GPIO4_13 instead of
the native CSPI_SSI function.
Fixes: c605cbf5e1 ("ARM: dts: imx: add device tree support for Freescale imx50evk board")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Van der Laan LANMCU is a module for the food storage rooms to control
proper gas composition.
Co-developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Altesco (Altus-Escon-Company BV) I6P is a part of the diagnostic system
for the vehicle inspection stations.
Co-developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Mark the STMPE resistive touch controller as a wakeup-source.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PHYTEC PEB-AV-02 adapter adds the capability to connect a parallel
LCD display to the phyBOARD-Segin full featured, either with capacitive
or resistive touch.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a PHYTEC phyBOARD-Segin full featured with phyCORE-i.MX 6UL with
eMMC and following features:
- i.MX 6UL
- 512 MB RAM
- eMMC
- USB Host/OTG
- 2x 100 Mbit/s Ethernet
- RS232
- CAN
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The VDDA LDO1 PMIC output supplies the analog VDDA input of the
STM32MP1 on DHCOM, keep it always on, otherwise there could be
leakage through the SoC.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The VIO regulator is supplied by PMIC Buck3, describe this in the DT.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
On the prototype DHCOM, the LED5 was connected to pin PG2 of the
STM32MP15xx, however on the production SoM this was changed to pin
PC6. Update the connection in the DT.
Fixes: 81d5fc7197 ("ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
On the prototype DHCOM, the TA3-GPIO-C button was connected to pin PI11 of
the STM32MP15xx, however on the production SoM this was changed to pin PG0
to free up the IRQ line 11 for LAN8710i PHY IRQ. Update the connection in
the DT. Since the IRQ line 0 is used for PMIC as well and cannot be shared
with the button, make the button polled.
Fixes: 87cabf9405 ("ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Rename the DSI controller nodes from "dsi-controller@"
to "dsi@" so they match the naming convention in the
YAML schema for DSI controllers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201104133758.1373298-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The NanoPi R1 is a complete open source board developed
by FriendlyElec for makers, hobbyists, fans and etc.
NanoPi R1 key features
- Allwinner H3, Quad-core Cortex-A7@1.2GHz
- 512MB/1GB DDR3 RAM
- 8GB eMMC
- microSD slot
- 10/100/1000M Ethernet x 1
- 10/100 Ethernet x 1
- Wifi 802.11b/g/n
- Bluetooth 4.0
- Serial Debug Port
- 5V 2A DC power-supply
Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201102100157.85801-2-mtwget@gmail.com
The Elimo Engineering Initium is an Open Source Hardware Single Board
Computer based on the Elimo Impetus SoM.
It is meant as the first development platform for the Impetus, providing
convenient access to the peripherals on the Impetus.
It provides:
USB-C power input
UART-to-USB bridge on the USB-C connector, connected to UART1
USB-A connector for USB2.0 (Host, Device, OTG)
Audio Line In/Out
Pin header to access all signals on the M2 connector of the SoM
Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201105183231.12952-4-matteo.scordino@gmail.com
The Elimo Engineering Impetus is an Open Source Hardware System-on-Module
based on the SoChip S3 SoC.
It is meant for integration into carrier boards or, more generally,
larger designs, and uses an M2 connector to facilitate that.
Interfaces on the M.2/NGFF 42mm connector:
WiFi IEEE 802. 11abgn (on-module Realtek)
Bluetooth 4.2/BLE (on-module Realtek)
RGB LCD Interface (on-module connector)
MIPI Camera Interface (on-module connector)
IEEE 802. 3u Ethernet MAC (external connecto)
USB2.0 (Host, Device, OTG) (external connector)
Audio Line In/Out (external connector)
Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201105183231.12952-2-matteo.scordino@gmail.com
Add a placeholder for a MAC address. A bootloader may fill it
to set the MAC address and override EEPROM settings.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20201001135254.28178-1-l.stelmach@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add Ethernet interface description for Odroid X/X2.
Add an alias to enable bootloaders to find the Ethernet interface
and assign a MAC address.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20201103184412.18874-7-l.stelmach@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
