The function __{pgd, pud, pmd, pte}_error() are introduced so that
they can be called by {pgd, pud, pmd, pte}_ERROR(). However, some
of the functions could never be called when the corresponding page
table level isn't enabled. For example, __{pud, pmd}_error() are
unused when PUD and PMD are folded to PGD.
This removes __{pgd, pud, pmd, pte}_error() and call pr_err() from
{pgd, pud, pmd, pte}_ERROR() directly, similar to what x86/powerpc
are doing. With this, the code looks a bit simplified either.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20200913234730.23145-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
The existing comment about steppable hint instruction is not complete
and only describes NOP instructions as steppable. As the function
aarch64_insn_is_steppable_hint allows all white-listed instruction
to be probed so the comment is updated to reflect this.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Link: https://lore.kernel.org/r/20200914083656.21428-7-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
With the addition of ARMv8.3-FPAC feature, the probe of authenticate
ptrauth instructions (AUT*) may cause ptrauth fault exception in case of
authenticate failure so they cannot be safely single stepped.
Hence the probe of authenticate instructions is disallowed but the
corresponding pac ptrauth instruction (PAC*) is not affected and they can
still be probed. Also AUTH* instructions do not make sense at function
entry points so most realistic probes would be unaffected by this change.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Link: https://lore.kernel.org/r/20200914083656.21428-6-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The current address authentication cpufeature levels are set as LOWER_SAFE
which is not compatible with the different configurations added for Armv8.3
ptrauth enhancements as the different levels have different behaviour and
there is no tunable to enable the lower safe versions. This is rectified
by setting those cpufeature type as EXACT.
The current cpufeature framework also does not interfere in the booting of
non-exact secondary cpus but rather marks them as tainted. As a workaround
this is fixed by replacing the generic match handler with a new handler
specific to ptrauth.
After this change, if there is any variation in ptrauth configurations in
secondary cpus from boot cpu then those mismatched cpus are parked in an
infinite loop.
Following ptrauth crash log is observed in Arm fastmodel with simulated
mismatched cpus without this fix,
CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64ISAR1_EL1. Boot CPU: 0x11111110211402, CPU4: 0x11111110211102
CPU features: Unsupported CPU feature variation detected.
GICv3: CPU4: found redistributor 100 region 0:0x000000002f180000
CPU4: Booted secondary processor 0x0000000100 [0x410fd0f0]
Unable to handle kernel paging request at virtual address bfff800010dadf3c
Mem abort info:
ESR = 0x86000004
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
[bfff800010dadf3c] address between user and kernel address ranges
Internal error: Oops: 86000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 4 PID: 29 Comm: migration/4 Tainted: G S 5.8.0-rc4-00005-ge658591d66d1-dirty #158
Hardware name: Foundation-v8A (DT)
pstate: 60000089 (nZCv daIf -PAN -UAO BTYPE=--)
pc : 0xbfff800010dadf3c
lr : __schedule+0x2b4/0x5a8
sp : ffff800012043d70
x29: ffff800012043d70 x28: 0080000000000000
x27: ffff800011cbe000 x26: ffff00087ad37580
x25: ffff00087ad37000 x24: ffff800010de7d50
x23: ffff800011674018 x22: 0784800010dae2a8
x21: ffff00087ad37000 x20: ffff00087acb8000
x19: ffff00087f742100 x18: 0000000000000030
x17: 0000000000000000 x16: 0000000000000000
x15: ffff800011ac1000 x14: 00000000000001bd
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 71519a147ddfeb82
x9 : 825d5ec0fb246314 x8 : ffff00087ad37dd8
x7 : 0000000000000000 x6 : 00000000fffedb0e
x5 : 00000000ffffffff x4 : 0000000000000000
x3 : 0000000000000028 x2 : ffff80086e11e000
x1 : ffff00087ad37000 x0 : ffff00087acdc600
Call trace:
0xbfff800010dadf3c
schedule+0x78/0x110
schedule_preempt_disabled+0x24/0x40
__kthread_parkme+0x68/0xd0
kthread+0x138/0x160
ret_from_fork+0x10/0x34
Code: bad PC value
After this fix, the mismatched CPU4 is parked as,
CPU features: CPU4: Detected conflict for capability 39 (Address authentication (IMP DEF algorithm)), System: 1, CPU: 0
CPU4: will not boot
CPU4: failed to come online
CPU4: died during early boot
[Suzuki: Introduce new matching function for address authentication]
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200914083656.21428-5-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Some Armv8.3 Pointer Authentication enhancements have been introduced
which are mandatory for Armv8.6 and optional for Armv8.3. These features
are,
* ARMv8.3-PAuth2 - An enhanced PAC generation logic is added which hardens
finding the correct PAC value of the authenticated pointer.
* ARMv8.3-FPAC - Fault is generated now when the ptrauth authentication
instruction fails in authenticating the PAC present in the address.
This is different from earlier case when such failures just adds an
error code in the top byte and waits for subsequent load/store to abort.
The ptrauth instructions which may cause this fault are autiasp, retaa
etc.
The above features are now represented by additional configurations
for the Address Authentication cpufeature and a new ESR exception class.
The userspace fault received in the kernel due to ARMv8.3-FPAC is treated
as Illegal instruction and hence signal SIGILL is injected with ILL_ILLOPN
as the signal code. Note that this is different from earlier ARMv8.3
ptrauth where signal SIGSEGV is issued due to Pointer authentication
failures. The in-kernel PAC fault causes kernel to crash.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200914083656.21428-4-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Some error signal need to pass proper ARM esr error code to userspace to
better identify the cause of the signal. So the function
force_signal_inject is extended to pass this as a parameter. The
existing code is not affected by this change.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200914083656.21428-3-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently the ARMv8.3-PAuth combined branch instructions (braa, retaa
etc.) are not simulated for out-of-line execution with a handler. Hence the
uprobe of such instructions leads to kernel warnings in a loop as they are
not explicitly checked and fall into INSN_GOOD categories. Other combined
instructions like LDRAA and LDRBB can be probed.
The issue of the combined branch instructions is fixed by adding
group definitions of all such instructions and rejecting their probes.
The instruction groups added are br_auth(braa, brab, braaz and brabz),
blr_auth(blraa, blrab, blraaz and blrabz), ret_auth(retaa and retab) and
eret_auth(eretaa and eretab).
Warning log:
WARNING: CPU: 0 PID: 156 at arch/arm64/kernel/probes/uprobes.c:182 uprobe_single_step_handler+0x34/0x50
Modules linked in:
CPU: 0 PID: 156 Comm: func Not tainted 5.9.0-rc3 #188
Hardware name: Foundation-v8A (DT)
pstate: 804003c9 (Nzcv DAIF +PAN -UAO BTYPE=--)
pc : uprobe_single_step_handler+0x34/0x50
lr : single_step_handler+0x70/0xf8
sp : ffff800012af3e30
x29: ffff800012af3e30 x28: ffff000878723b00
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 0000000000000000
x23: 0000000060001000 x22: 00000000cb000022
x21: ffff800012065ce8 x20: ffff800012af3ec0
x19: ffff800012068d50 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000
x9 : ffff800010085c90 x8 : 0000000000000000
x7 : 0000000000000000 x6 : ffff80001205a9c8
x5 : ffff80001205a000 x4 : ffff80001233db80
x3 : ffff8000100a7a60 x2 : 0020000000000003
x1 : 0000fffffffff008 x0 : ffff800012af3ec0
Call trace:
uprobe_single_step_handler+0x34/0x50
single_step_handler+0x70/0xf8
do_debug_exception+0xb8/0x130
el0_sync_handler+0x138/0x1b8
el0_sync+0x158/0x180
Fixes: 74afda4016 ("arm64: compile the kernel with ptrauth return address signing")
Fixes: 04ca3204fa ("arm64: enable pointer authentication")
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200914083656.21428-2-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The GIC's internal view of the priority mask register and the assigned
interrupt priorities are based on whether GIC security is enabled and
whether firmware routes Group 0 interrupts to EL3. At the moment, we
support priority masking when ICC_PMR_EL1 and interrupt priorities are
either both modified by the GIC, or both left unchanged.
Trusted Firmware-A's default interrupt routing model allows Group 0
interrupts to be delivered to the non-secure world (SCR_EL3.FIQ == 0).
Unfortunately, this is precisely the case that the GIC driver doesn't
support: ICC_PMR_EL1 remains unchanged, but the GIC's view of interrupt
priorities is different from the software programmed values.
Support pseudo-NMIs when SCR_EL3.FIQ == 0 by using a different value to
mask regular interrupts. All the other values remain the same.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200912153707.667731-3-alexandru.elisei@arm.com
In order to deal with IPIs as normal interrupts, let's add
a new way to register them with the architecture code.
set_smp_ipi_range() takes a range of interrupts, and allows
the arch code to request them as if the were normal interrupts.
A standard handler is then called by the core IRQ code to deal
with the IPI.
This means that we don't need to call irq_enter/irq_exit, and
that we don't need to deal with set_irq_regs either. So let's
move the dispatcher into its own function, and leave handle_IPI()
as a compatibility function.
On the sending side, let's make use of ipi_send_mask, which
already exists for this purpose.
One of the major difference is that we end up, in some cases
(such as when performing IRQ time accounting on the scheduler
IPI), end up with nested irq_enter()/irq_exit() pairs.
Other than the (relatively small) overhead, there should be
no consequences to it (these pairs are designed to nest
correctly, and the accounting shouldn't be off).
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that we allow CPUs affected by erratum 1418040 to come in late,
this prevents their unaffected sibblings from coming in late (or
coming back after a suspend or hotplug-off, which amounts to the
same thing).
To allow this, we need to add ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU,
which amounts to set .type to ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE.
Fixes: bf87bb0881 ("arm64: Allow booting of late CPUs affected by erratum 1418040")
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200911181611.2073183-1-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Kernel startup entry point requires disabling MMU and D-cache.
As for kexec-reboot, taking a close look at "msr sctlr_el1, x12" in
__cpu_soft_restart as the following:
-1. booted at EL1
The instruction is enough to disable MMU and I/D cache for
EL1 regime.
-2. booted at EL2, using VHE
Access to SCTLR_EL1 is redirected to SCTLR_EL2 in EL2. So the instruction
is enough to disable MMU and clear I+C bits for EL2 regime.
-3. booted at EL2, not using VHE
The instruction itself can not affect EL2 regime. But The hyp-stub doesn't
enable the MMU and I/D cache for EL2 regime. And KVM also disable them for EL2
regime when its unloaded, or execute a HVC_SOFT_RESTART call. So when
kexec-reboot, the code in KVM has prepare the requirement.
As a conclusion, disabling MMU and clearing I+C bits in
SYM_CODE_START(arm64_relocate_new_kernel) is redundant, and can be removed
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: James Morse <james.morse@arm.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Remi Denis-Courmont <remi.denis.courmont@huawei.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: kvmarm@lists.cs.columbia.edu
Link: https://lore.kernel.org/r/1598621998-20563-1-git-send-email-kernelfans@gmail.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
HWCAP name arrays (hwcap_str, compat_hwcap_str, compat_hwcap2_str) that are
scanned for /proc/cpuinfo are detached from their bit definitions making it
vulnerable and difficult to correlate. It is also bit problematic because
during /proc/cpuinfo dump these arrays get traversed sequentially assuming
they reflect and match actual HWCAP bit sequence, to test various features
for a given CPU. This redefines name arrays per their HWCAP bit definitions
. It also warns after detecting any feature which is not expected on arm64.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1599630535-29337-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In the absence of ACPI or DT topology data, we fallback to haphazardly
decoding *something* out of MPIDR. Sadly, the contents of that register are
mostly unusable due to the implementation leniancy and things like Aff0
having to be capped to 15 (despite being encoded on 8 bits).
Consider a simple system with a single package of 32 cores, all under the
same LLC. We ought to be shoving them in the same core_sibling mask, but
MPIDR is going to look like:
| CPU | 0 | ... | 15 | 16 | ... | 31 |
|------+---+-----+----+----+-----+----+
| Aff0 | 0 | ... | 15 | 0 | ... | 15 |
| Aff1 | 0 | ... | 0 | 1 | ... | 1 |
| Aff2 | 0 | ... | 0 | 0 | ... | 0 |
Which will eventually yield
core_sibling(0-15) == 0-15
core_sibling(16-31) == 16-31
NUMA woes
=========
If we try to play games with this and set up NUMA boundaries within those
groups of 16 cores via e.g. QEMU:
# Node0: 0-9; Node1: 10-19
$ qemu-system-aarch64 <blah> \
-smp 20 -numa node,cpus=0-9,nodeid=0 -numa node,cpus=10-19,nodeid=1
The scheduler's MC domain (all CPUs with same LLC) is going to be built via
arch_topology.c::cpu_coregroup_mask()
In there we try to figure out a sensible mask out of the topology
information we have. In short, here we'll pick the smallest of NUMA or
core sibling mask.
node_mask(CPU9) == 0-9
core_sibling(CPU9) == 0-15
MC mask for CPU9 will thus be 0-9, not a problem.
node_mask(CPU10) == 10-19
core_sibling(CPU10) == 0-15
MC mask for CPU10 will thus be 10-19, not a problem.
node_mask(CPU16) == 10-19
core_sibling(CPU16) == 16-19
MC mask for CPU16 will thus be 16-19... Uh oh. CPUs 16-19 are in two
different unique MC spans, and the scheduler has no idea what to make of
that. That triggers the WARN_ON() added by commit
ccf74128d6 ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap")
Fixing MPIDR-derived topology
=============================
We could try to come up with some cleverer scheme to figure out which of
the available masks to pick, but really if one of those masks resulted from
MPIDR then it should be discarded because it's bound to be bogus.
I was hoping to give MPIDR a chance for SMT, to figure out which threads are
in the same core using Aff1-3 as core ID, but Sudeep and Robin pointed out
to me that there are systems out there where *all* cores have non-zero
values in their higher affinity fields (e.g. RK3288 has "5" in all of its
cores' MPIDR.Aff1), which would expose a bogus core ID to userspace.
Stop using MPIDR for topology information. When no other source of topology
information is available, mark each CPU as its own core and its NUMA node
as its LLC domain.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200829130016.26106-1-valentin.schneider@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
event_idx is obtained from armv8pmu_get_event_idx(), and this idx must be
between ARMV8_IDX_CYCLE_COUNTER and cpu_pmu->num_events. So it's unnecessary
to do this check. Let's remove it.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1599213458-28394-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
TEXT_OFFSET serves no purpose, and for this reason, it was redefined
as 0x0 in the v5.8 timeframe. Since this does not appear to have caused
any issues that require us to revisit that decision, let's get rid of the
macro entirely, along with any references to it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200825135440.11288-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The vdso linker script is preprocessed on demand.
Adding it to 'targets' is enough to include the .cmd file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
This patch is to add the general hardware last level cache (LLC) events
for PMUv3: one event is for LLC access and another is for LLC miss.
With this change, perf tool can support last level cache profiling,
below is an example to demonstrate the usage on Arm64:
$ perf stat -e LLC-load-misses -e LLC-loads -- \
perf bench mem memcpy -s 1024MB -l 100 -f default
[...]
Performance counter stats for 'perf bench mem memcpy -s 1024MB -l 100 -f default':
35,534,262 LLC-load-misses # 2.16% of all LL-cache hits
1,643,946,443 LLC-loads
[...]
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20200811053505.21223-1-leo.yan@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently, there are different description strings in die() such as
die("Oops",,), die("Oops - BUG",,). And panic() called by die() will
always show "Fatal exception" or "Fatal exception in interrupt".
Note that panic() will run any panic handler via panic_notifier_list.
And the string above will be formatted and placed in static buf[]
which will be passed to handler.
So panic handler can not distinguish which Oops it is from the buf if
we want to do some things like reserve the string in memory or panic
statistics. It's not benefit to debug. We need to add more codes to
troubleshoot. Let's utilize existing resource to make debug much simpler.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Link: https://lore.kernel.org/r/20200804085347.10720-1-zbestahu@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
When hibernating the contents of all pages in the system are written to
disk, however the MTE tags are not visible to the generic hibernation
code. So just before the hibernation image is created copy the tags out
of the physical tag storage into standard memory so they will be
included in the hibernation image. After hibernation apply the tags back
into the physical tag storage.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
When swapping pages out to disk it is necessary to save any tags that
have been set, and restore when swapping back in. Make use of the new
page flag (PG_ARCH_2, locally named PG_mte_tagged) to identify pages
with tags. When swapping out these pages the tags are stored in memory
and later restored when the pages are brought back in. Because shmem can
swap pages back in without restoring the userspace PTE it is also
necessary to add a hook for shmem.
Signed-off-by: Steven Price <steven.price@arm.com>
[catalin.marinas@arm.com: move function prototypes to mte.h]
[catalin.marinas@arm.com: drop '_tags' from arch_swap_restore_tags()]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Will Deacon <will@kernel.org>
This regset allows read/write access to a ptraced process
prctl(PR_SET_TAGGED_ADDR_CTRL) setting.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Alan Hayward <Alan.Hayward@arm.com>
Cc: Luis Machado <luis.machado@linaro.org>
Cc: Omair Javaid <omair.javaid@linaro.org>
Add support for bulk setting/getting of the MTE tags in a tracee's
address space at 'addr' in the ptrace() syscall prototype. 'data' points
to a struct iovec in the tracer's address space with iov_base
representing the address of a tracer's buffer of length iov_len. The
tags to be copied to/from the tracer's buffer are stored as one tag per
byte.
On successfully copying at least one tag, ptrace() returns 0 and updates
the tracer's iov_len with the number of tags copied. In case of error,
either -EIO or -EFAULT is returned, trying to follow the ptrace() man
page.
Note that the tag copying functions are not performance critical,
therefore they lack optimisations found in typical memory copy routines.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Alan Hayward <Alan.Hayward@arm.com>
Cc: Luis Machado <luis.machado@linaro.org>
Cc: Omair Javaid <omair.javaid@linaro.org>
In preparation for ptrace() access to the prctl() value, allow calling
these functions on non-current tasks.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
The CPU resume/suspend routines only take care of the common system
registers. Restore GCR_EL1 in addition via the __cpu_suspend_exit()
function.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The IRG, ADDG and SUBG instructions insert a random tag in the resulting
address. Certain tags can be excluded via the GCR_EL1.Exclude bitmap
when, for example, the user wants a certain colour for freed buffers.
Since the GCR_EL1 register is not accessible at EL0, extend the
prctl(PR_SET_TAGGED_ADDR_CTRL) interface to include a 16-bit field in
the first argument for controlling which tags can be generated by the
above instruction (an include rather than exclude mask). Note that by
default all non-zero tags are excluded. This setting is per-thread.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
By default, even if PROT_MTE is set on a memory range, there is no tag
check fault reporting (SIGSEGV). Introduce a set of option to the
exiting prctl(PR_SET_TAGGED_ADDR_CTRL) to allow user control of the tag
check fault mode:
PR_MTE_TCF_NONE - no reporting (default)
PR_MTE_TCF_SYNC - synchronous tag check fault reporting
PR_MTE_TCF_ASYNC - asynchronous tag check fault reporting
These options translate into the corresponding SCTLR_EL1.TCF0 bitfield,
context-switched by the kernel. Note that the kernel accesses to the
user address space (e.g. read() system call) are not checked if the user
thread tag checking mode is PR_MTE_TCF_NONE or PR_MTE_TCF_ASYNC. If the
tag checking mode is PR_MTE_TCF_SYNC, the kernel makes a best effort to
check its user address accesses, however it cannot always guarantee it.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
When the Memory Tagging Extension is enabled, two pages are identical
only if both their data and tags are identical.
Make the generic memcmp_pages() a __weak function and add an
arm64-specific implementation which returns non-zero if any of the two
pages contain valid MTE tags (PG_mte_tagged set). There isn't much
benefit in comparing the tags of two pages since these are normally used
for heap allocations and likely to differ anyway.
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Pages allocated by the kernel are not guaranteed to have the tags
zeroed, especially as the kernel does not (yet) use MTE itself. To
ensure the user can still access such pages when mapped into its address
space, clear the tags via set_pte_at(). A new page flag - PG_mte_tagged
(PG_arch_2) - is used to track pages with valid allocation tags.
Since the zero page is mapped as pte_special(), it won't be covered by
the above set_pte_at() mechanism. Clear its tags during early MTE
initialisation.
Co-developed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
The Memory Tagging Extension has two modes of notifying a tag check
fault at EL0, configurable through the SCTLR_EL1.TCF0 field:
1. Synchronous raising of a Data Abort exception with DFSC 17.
2. Asynchronous setting of a cumulative bit in TFSRE0_EL1.
Add the exception handler for the synchronous exception and handling of
the asynchronous TFSRE0_EL1.TF0 bit setting via a new TIF flag in
do_notify_resume().
On a tag check failure in user-space, whether synchronous or
asynchronous, a SIGSEGV will be raised on the faulting thread.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Add the cpufeature and hwcap entries to detect the presence of MTE. Any
secondary CPU not supporting the feature, if detected on the boot CPU,
will be parked.
Add the minimum SCTLR_EL1 and HCR_EL2 bits for enabling MTE. The Normal
Tagged memory type is configured in MAIR_EL1 before the MMU is enabled
in order to avoid disrupting other CPUs in the CnP domain.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
In the arm64 module linker script, the section .text.ftrace_trampoline
is specified unconditionally regardless of whether CONFIG_DYNAMIC_FTRACE
is enabled (this is simply due to the limitation that module linker
scripts are not preprocessed like the vmlinux one).
Normally, for .plt and .text.ftrace_trampoline, the section flags
present in the module binary wouldn't matter since module_frob_arch_sections()
would assign them manually anyway. However, the arm64 module loader only
sets the section flags for .text.ftrace_trampoline when CONFIG_DYNAMIC_FTRACE=y.
That's only become problematic recently due to a recent change in
binutils-2.35, where the .text.ftrace_trampoline section (along with the
.plt section) is now marked writable and executable (WAX).
We no longer allow writable and executable sections to be loaded due to
commit 5c3a7db0c7 ("module: Harden STRICT_MODULE_RWX"), so this is
causing all modules linked with binutils-2.35 to be rejected under arm64.
Drop the IS_ENABLED(CONFIG_DYNAMIC_FTRACE) check in module_frob_arch_sections()
so that the section flags for .text.ftrace_trampoline get properly set to
SHF_EXECINSTR|SHF_ALLOC, without SHF_WRITE.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: http://lore.kernel.org/r/20200831094651.GA16385@linux-8ccs
Link: https://lore.kernel.org/r/20200901160016.3646-1-jeyu@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit eaecca9e77 ("arm64: Fix __cpu_logical_map undefined issue")
exported cpu_logical_map in order to fix tegra194-cpufreq module build
failure.
As this might potentially cause problem while supporting physical CPU
hotplug, tegra194-cpufreq module was reworded to avoid use of
cpu_logical_map() via the commit 93d0c1ab23 ("cpufreq: replace
cpu_logical_map() with read_cpuid_mpir()")
Since cpu_logical_map was exported to fix the module build temporarily,
let us remove the same before it gains any user again.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200901095229.56793-1-sudeep.holla@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There's really no need to put every parameter on a new line when calling
a function with a long name, so reformat the *setup_additional_pages()
functions in the vDSO setup code to follow the usual conventions.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Most of the compat vDSO code can be built and guarded using IS_ENABLED,
so drop the unnecessary #ifdefs.
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Use the common DISCARDS rule for the linker script in an effort to
regularize the linker script to prepare for warning on orphaned
sections. Additionally clean up left-over no-op macros.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200821194310.3089815-12-keescook@chromium.org
Avoid .eh_frame* section generation by making sure both CFLAGS and AFLAGS
contain -fno-asychronous-unwind-tables and -fno-unwind-tables.
With all sources of .eh_frame now removed from the build, drop this
DISCARD so we can be alerted in the future if it returns unexpectedly
once orphan section warnings have been enabled.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200821194310.3089815-11-keescook@chromium.org
Remove last instance of an .eh_frame section by removing the needless Call
Frame Information annotations which were likely leftovers from 32-bit ARM.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200821194310.3089815-10-keescook@chromium.org
The .comment section doesn't belong in STABS_DEBUG. Split it out into a
new macro named ELF_DETAILS. This will gain other non-debug sections
that need to be accounted for when linking with --orphan-handling=warn.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20200821194310.3089815-5-keescook@chromium.org
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU goes
idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent.
-----BEGIN PGP SIGNATURE-----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=Hgt6
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of fixes for lockdep, tracing and RCU:
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU
goes idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent"
* tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep,trace: Expose tracepoints
lockdep: Only trace IRQ edges
mips: Implement arch_irqs_disabled()
arm64: Implement arch_irqs_disabled()
nds32: Implement arch_irqs_disabled()
locking/lockdep: Cleanup
x86/entry: Remove unused THUNKs
cpuidle: Move trace_cpu_idle() into generic code
cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
sched,idle,rcu: Push rcu_idle deeper into the idle path
cpuidle: Fixup IRQ state
lockdep: Use raw_cpu_*() for per-cpu variables
see the -Wa,-march option.
- Fix "make vdso_install" when COMPAT_VDSO is disabled.
- Make KVM more robust if the AT S1E1R instruction triggers an exception
(architecture corner cases).
-----BEGIN PGP SIGNATURE-----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=wzsB
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix kernel build with the integrated LLVM assembler which doesn't see
the -Wa,-march option.
- Fix "make vdso_install" when COMPAT_VDSO is disabled.
- Make KVM more robust if the AT S1E1R instruction triggers an
exception (architecture corner cases).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
KVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception
KVM: arm64: Survive synchronous exceptions caused by AT instructions
KVM: arm64: Add kvm_extable for vaxorcism code
arm64: vdso32: make vdso32 install conditional
arm64: use a common .arch preamble for inline assembly
KVM has a one instruction window where it will allow an SError exception
to be consumed by the hypervisor without treating it as a hypervisor bug.
This is used to consume asynchronous external abort that were caused by
the guest.
As we are about to add another location that survives unexpected exceptions,
generalise this code to make it behave like the host's extable.
KVM's version has to be mapped to EL2 to be accessible on nVHE systems.
The SError vaxorcism code is a one instruction window, so has two entries
in the extable. Because the KVM code is copied for VHE and nVHE, we end up
with four entries, half of which correspond with code that isn't mapped.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fallthrough annotations for consecutive default and case labels
are not necessary.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
