The property "mediatek,pctl" is only required for SoCs such as MT2701 and
MT7623, so adding a few words for stating the condition.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
DT unit addresses should be lower case hex. Fix all the
binding examples.
Converted with the following command from Krzysztof Kozlowski:
sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt')
Signed-off-by: Rob Herring <robh@kernel.org>
i.MX6SX has a PCI power domain in PGC. Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In the provided example the unit address does not match the 'reg' value,
as IMX7_POWER_DOMAIN_PCIE_PHY is defined as 1.
Fix the unit address and avoid using defines in reg as per Rob
Herring's recommendation.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds the documentation for the TS-4600 by Technologic Systems.
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds the documentation for the TS-7970 by Technologic Systems.
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GKTW70SDAE4SE is an LVDS display panel.
Their bindings are modelled on the the LVDS panel bindings.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Solomon Goldentek Display Corporation is a Taiwanese LCD/LCM manufacturer.
Company Site: http://www.goldentek.com.tw
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lots of overlapping changes. Also on the net-next side
the XDP state management is handled more in the generic
layers so undo the 'net' nfp fix which isn't applicable
in net-next.
Include a necessary change by Jakub Kicinski, with log message:
====================
cls_bpf no longer takes care of offload tracking. Make sure
netdevsim performs necessary checks. This fixes a warning
caused by TC trying to remove a filter it has not added.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for PRNG in Exynos5250+ SoCs.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Devices have inter-dependencies some times. For example a device that
needs to run at 800 MHz, needs another device (e.g. Its power domain) to
be configured at a particular operating performance point.
This patch introduces a new property "required-opp" which can be present
directly in a device's node (if it doesn't need to change its OPPs), or
in device's OPP nodes. More details on the property can be seen in the
binding itself.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Power-domains can also have their active states and this patch enhances
the OPP binding to define those. The power domains can use the OPP
bindings as is, with one additional change to Allow
"operating-points-v2" property to contain multiple phandles for power
domain providers providing multiple domains.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add optional output clock DT property to enable PLL reset when a clock
output is enabled.
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sergej Sawazki <sergej@taudac.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
More divider clocks are needed by IP. So enlarge the PLL divider
array to accommodate more divider clocks.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Introduce a new binding with its documentation for Spreadtrum clock
sub-framework.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
for the type-c phys. The Kevin Chromebooks based on rk3399 now can use their
internal edp displays. RK3328 gets its efuse node and Mali450 gpu node,
which actually produces already some nice results with the WIP Lima driver.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlo7/J4QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVogB/wNdimvRAq7DdpIXxzMxoIEB3jXZ1zJ2TVL
Gxim5h0RizQGIoiV4CYkQG2CdB1HG4Updj4SW9GYMl004fklSA26fB64WFVDM0VR
8uqVxkyCgo2QzzQxsNDPrXvNv3WjbrFVe+pWebzUZ1RCkHBgeJA/o61vjdNdvwq3
jgnr0YDjYYU+9sqoq31SYe0vzvoDGPmE7+Mlmw3eAszQqV66sk0/50IKV5z4xx8e
oyD4M0JpPhGyPMoaBIekzr4wjkrKbEeJ5VQy/afFAYJWzi8X+vABIH78kGl+9q76
AmEQxBWr0ZQSIPWTVofUzHzKX78gSt2Gts2kbaFXPzMbCn8xWcKM
=C4Hu
-----END PGP SIGNATURE-----
Merge tag 'v4.16-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts64 changes for 4.16" from Heiko Stübner:
General RK3399 gets Mipi nodes, fixes for usb3 support and better support
for the type-c phys. The Kevin Chromebooks based on rk3399 now can use their
internal edp displays. RK3328 gets its efuse node and Mali450 gpu node,
which actually produces already some nice results with the WIP Lima driver.
* tag 'v4.16-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add efuse device node for RK3328 SoC
arm64: dts: rockchip: add rk3328 mali gpu node
dt-bindings: gpu: mali-utgard: add rockchip,rk3328-mali compatible
arm64: dts: rockchip: add extcon nodes and enable tcphy rk3399-gru
arm64: dts: rockchip: add usb3-phy otg-port support for rk3399
arm64: dts: rockchip: add reset property for dwc3 controllers on rk3399
arm64: dts: rockchip: add the aclk_usb3 clocks for USB3 on rk3399
arm64: dts: rockchip: add pd_usb3 power-domain node for rk3399
arm64: dts: rockchip: Enable edp disaplay on kevin
arm64: dts: rockchip: update mipi cells for RK3399
arm64: dts: rockchip: add mipi_dsi1 support for rk3399
arm64: dts: rockchip: add rk3399 DSI0 reset
- update mmc nodes for mt7623
- mt7623 change mmc card detection pin to active low
- mt7623 set unit address to lower case
-----BEGIN PGP SIGNATURE-----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=d/4Y
-----END PGP SIGNATURE-----
Merge tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt
Pull "arm: Updates of armv7 DTS for v4.15-next" from Matthias Brugger:
- add reset cells mt2701 and mt7623 ethsys
- update mmc nodes for mt7623
- mt7623 change mmc card detection pin to active low
- mt7623 set unit address to lower case
* tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: ARM: Mediatek: Fix ethsys documentation
arm: mt7: dts: Remove leading 0x and 0s from bindings notation
arm: dts: mt7623: fix card detection issue on bananapi-r2
arm: dts: mt7623: update mmc related nodes with the appropriate fallback
arm: dts: mt2701: Add reset-cells
arm: dts: mt7623: Update ethsys binding
The Tegra memory controller driver will now instruct the SMMU driver to
create groups, which will make it easier for device drivers to share an
IOMMU domain between multiple devices.
Initial Tegra186 support is also added in a separate driver.
-----BEGIN PGP SIGNATURE-----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=ncAl
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.16-memory' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
Pull "memory: tegra: Changes for v4.16-rc1" from Thierry Reding:
The Tegra memory controller driver will now instruct the SMMU driver to
create groups, which will make it easier for device drivers to share an
IOMMU domain between multiple devices.
Initial Tegra186 support is also added in a separate driver.
* tag 'tegra-for-4.16-memory' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
iommu/tegra-smmu: Fix return value check in tegra_smmu_group_get()
iommu/tegra: Allow devices to be grouped
memory: tegra: Create SMMU display groups
memory: tegra: Add Tegra186 support
dt-bindings: memory: Add Tegra186 support
dt-bindings: misc: Add Tegra186 MISC registers bindings
This contains a set of patches that extend existing bindings with support
for Tegra186.
-----BEGIN PGP SIGNATURE-----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=ItSb
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.16-dt-bindings' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Pull "dt-bindings: Updates for v4.16-rc1" from Thierry Reding:
This contains a set of patches that extend existing bindings with support
for Tegra186.
* tag 'tegra-for-4.16-dt-bindings' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: Add Tegra186 support
dt-bindings: misc: Add Tegra186 MISC registers bindings
Otherwise we cannot use generic OF_DEV_AUXDATA match without listing
all the compatibles separately for OF_DEV_AUXDATA. Let's also update the
binding accordingly.
Let's also fix omap4.dtsi to use "ti,sysc-omap4-sr" compatible as we
have documented in the binding. This was not noticed earlier as we're
still probing SmartReflex driver with platform data.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* Document V3MSK board bindings
These are the bindings for the R-Car V3M Starter Kit
* Document M3-W-based Salvator-XS board bingigns
Geert Uytterhoeven says "The Renesas Salvator-XS (Salvator-X 2nd version)
development board can be equipped with either an R-Car H3 ES2.0 or M3-W
ES1.x SiP, which are pin-compatible."
-----BEGIN PGP SIGNATURE-----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=PsrW
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Renesas ARM Based SoC DT Bindings Updates for v4.16" from Simon Horman:
* Document V3MSK board bindings
These are the bindings for the R-Car V3M Starter Kit
* Document M3-W-based Salvator-XS board bingigns
Geert Uytterhoeven says "The Renesas Salvator-XS (Salvator-X 2nd version)
development board can be equipped with either an R-Car H3 ES2.0 or M3-W
ES1.x SiP, which are pin-compatible."
* tag 'renesas-dt-bindings-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: renesas: document V3MSK board bindings
ARM: shmobile: Document Renesas M3-W-based Salvator-XS board DT bindings
Add support for the ARTPEC-7 SoC in the artpec6 driver.
The ARTPEC-6 SoC and the ARTPEC-7 SoC are very similar.
Unfortunately, some fields in the PCIECFG and PCIESTAT
register have changed.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
The PCIe controller integrated in ARTPEC-6 SoCs is capable of operating in
endpoint mode. Add endpoint mode support to the artpec6 driver.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Add power dt-bindings for MT2712.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Correct the Device Tree bindings for the HIF_CPUBIUCTRL node whose
compatible string is actually brcm,bcm<chip-id>-cpu-biu-ctrl. Also
document in the binding the fallback property
("brcm,brcmstb-cpu-biu-ctrl") and update the example accordingly.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Broadcom's Brahma-B53 CPU is an ARMv8A processor used on a number of
DSL, Cable Modem and Set-top-box SoCs.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Attempt to acquire the APCS IPC through the mailbox framework and fall
back to the old syscon based approach, to allow us to move away from
using the syscon.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
A bunch of really small fixes here, all driver specific and mostly in
error handling and remove paths. The most important fixes are for the
a3700 clock configuration and a fix for a nasty stall which could
potentially cause data corruption with the xilinx driver.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlo6kgoTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0KGDB/4sweNiUfktOAN1Y86bRmyrTvJctCCY
MAOAzDxvKjUuYEoq0LZWKEt0uIXM5+cB+YrghEn6e5lwdB0rRsifzRQ5D2iR8odf
xhxOW4uV2+RhCDiPWnKP7cOiOxahYPSBw1RNHsAhXlcT11rRQC1QMwpWLE0ET/WG
UreahRO1pwGOCPVCxkfDmv+DxTm3IE0TojT8GvC7QsAD2UapqbLAcCNGN8SoSKD9
8P24pjStItA/6JQVawUIaFLHgcAGHw3WeTf2TQbP6rEF5u5je4BGtELGjSZ72bdS
0RT3CP0eNnLPzh1XqcBGjEPDKWnnglNc0o9XSU3lTNbfgB1cQ2kFQDs/
=ILZY
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of really small fixes here, all driver specific and mostly in
error handling and remove paths.
The most important fixes are for the a3700 clock configuration and a
fix for a nasty stall which could potentially cause data corruption
with the xilinx driver"
* tag 'spi-fix-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atmel: fixed spin_lock usage inside atmel_spi_remove
spi: sun4i: disable clocks in the remove function
spi: rspi: Do not set SPCR_SPE in qspi_set_config_register()
spi: Fix double "when"
spi: a3700: Fix clk prescaling for coefficient over 15
spi: xilinx: Detect stall with Unknown commands
spi: imx: Update device tree binding documentation
The ethsys registers a reset controller, so we need to specify a
reset cell. This patch fixes the documentation.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Update the IPMMU DT binding documentation to include the
r8a77970 (R-Car V3M) and r8a77995 (R-Car D3) compat strings.
Based on work for r8a7796 by Magnus Damm.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Update the IPMMU DT binding documentation to include the r8a7796 compat
string for R-Car M3-W.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Add CAN pin groups on RZ/G1E,
- Add CAN and CAN FD pin groups on R-Car H3 ES2.0, and R-Car D3,
- Add support for the new R-Car V3M SoC,
- Add support for I2C on R-Car D3,
- Small fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJaM5QbAAoJEEgEtLw/Ve77DL0QAK5qKY/9Jt9PASqIvEJMsc5U
Ns8ULXaynLSvOLHWNCFN0MD53gnKsQVOFMynsf1NWJ5j2fqCCu5nkrxoZKTTxMWs
1TJGXBrCqQLzQspUXxdjFwJHIOeXCDQllw5Xsdq4MbzmlDRr+G9jj7CxLK5pjk1B
jUZ+cfDBwuSWlDymrwcEAREBQtg7HYBlkt1zyFXPJYu5R/iGdE1ih39yBqTPka1/
ua+d2FdGOUeOXoqqAkkJZ9+8YsITAoU+YoriKgf2I/vLiovBCBSdfenJZ5He+Hth
7EWaIiK1Y/zdwadUtzC6/FGckkn4kj6+t5koLrXaSXce/TO4uWN6iIAiWATd26CY
sxv1+likNAN5rGXtowXiyyOo26bZ/nFchgT4JC8FZdG0DeseOAFYE8pn8TKvDdSZ
RTPmo6r/CiFsyn3oAzOjSMbafEvXJBZX/QQDgsS1orboWAbi8YtswacIPc/GGBhr
iCc28erUks2fSq4+3W64Q+s/061I7NiES13ry9o3srfjWb45PEdjO+FUMN8chazt
sNrWWrRB6HEs9N5/jGA6ZRPnbZnJnl8d1sxY/Tpj32To0kDWn3CVlGwLZDDaRIJf
Zs/q8i/2D97RyiXtTtKacO2fZpHWQl+9kDKXOEjVcLZh5utkKM+L2cBSHoG5cCRn
XsPp6HLHI4BdJnap4+La
=dwjl
-----END PGP SIGNATURE-----
Merge tag 'sh-pfc-for-v4.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: sh-pfc: Updates for v4.16
- Add CAN pin groups on RZ/G1E,
- Add CAN and CAN FD pin groups on R-Car H3 ES2.0, and R-Car D3,
- Add support for the new R-Car V3M SoC,
- Add support for I2C on R-Car D3,
- Small fixes and cleanups.
This driver consists of 2 controllers due to a hole in mapping:
-1 controller for GPIO bankA to K.
-1 controller for GPIO bankZ.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a list of supported STM32 SoC bindings.
Signed-off-by: Gwenael Treuveur <gwenael.treuveur@st.com>
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The compatible string for this panel was specified as
toshiba,lt089ac29000.txt. I believe this is a mistake.
Fixes: 06e733e41f ("drm/panel: simple: add Toshiba LT089AC19000")
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
A bigger pull request this time, the most visible change being the new
driver mt76. But there's also Kconfig refactoring in ath9k and ath10k,
work beginning in iwlwifi to have rate scaling in firmware/hardware,
wcn3990 support getting closer in ath10k and lots of smaller changes.
mt76
* a new driver for MT76x2e, a 2x2 PCIe 802.11ac chipset by MediaTek
ath10k
* enable multiqueue support for all hw using mac80211 wake_tx_queue op
* new Kconfig option ATH10K_SPECTRAL to save RAM
* show tx stats on QCA9880
* new qcom,ath10k-calibration-variant DT entry
* WMI layer support for wcn3990
ath9k
* new Kconfig option ATH9K_COMMON_SPECTRAL to save RAM
wcn36xx
* hardware scan offload support
wil6210
* run-time PM support when interface is down
iwlwifi
* initial work for rate-scaling offload
* Support for new FW API version 36
* Rename the temporary hw name A000 to 22000
ssb
* make SSB a menuconfig to ease disabling it all
mwl8k
* enable non-DFS 5G channels 149-165
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaN8MiAAoJEG4XJFUm622bGN4H/jc7+JqGUMozK8CKe5UGFnu7
HlwP3Vpz7SR655CgoMzvNzJ6lvBxaPA77epPFkALuwua3J22feakv5UGipT7RPI/
EtFCtq6+dIB+qooJ/8hUQVfAV8o13+dQzBQqtp7Wg37ok0qhcGpTLsvf2rI0ZG1R
+lcC2Jyk0lYjAPuPri3+KjxPLkZhGbx/hCdKwxQfCoubEVoqimMcQ68+RqU3rxNB
Of2Sk8IsaIevantLPnmO0+9OhZiMyoy4QGSnnuHntdpgZqEl0NbmVshQONCU9oTu
3RPKvbbYe57gRfgLKEvqTvij5R8ZxxwF+BFacaXch7Q9k6pMoJuyD6gJ8/S8AW8=
=FTCb
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-for-davem-2017-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
The drivers/net/wireless/intel/iwlwifi/pcie/drv.c conflict was
resolved using a diff provided by Kalle in his pull request.
Kalle Valo says:
====================
wireless-drivers-next patches for 4.16
A bigger pull request this time, the most visible change being the new
driver mt76. But there's also Kconfig refactoring in ath9k and ath10k,
work beginning in iwlwifi to have rate scaling in firmware/hardware,
wcn3990 support getting closer in ath10k and lots of smaller changes.
mt76
* a new driver for MT76x2e, a 2x2 PCIe 802.11ac chipset by MediaTek
ath10k
* enable multiqueue support for all hw using mac80211 wake_tx_queue op
* new Kconfig option ATH10K_SPECTRAL to save RAM
* show tx stats on QCA9880
* new qcom,ath10k-calibration-variant DT entry
* WMI layer support for wcn3990
ath9k
* new Kconfig option ATH9K_COMMON_SPECTRAL to save RAM
wcn36xx
* hardware scan offload support
wil6210
* run-time PM support when interface is down
iwlwifi
* initial work for rate-scaling offload
* Support for new FW API version 36
* Rename the temporary hw name A000 to 22000
ssb
* make SSB a menuconfig to ease disabling it all
mwl8k
* enable non-DFS 5G channels 149-165
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2017-12-18
Here's the first bluetooth-next pull request for the 4.16 kernel.
- hci_ll: multiple cleanups & fixes
- Remove Gustavo Padovan from the MAINTAINERS file
- Support BLE Adversing while connected (if the controller can do it)
- DT updates for TI chips
- Various other smaller cleanups & fixes
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaNy81AAoJEHm+PkMAQRiGq2YH/1C1so18qErhPosdfeLIXLbA
iC9XcIvkPuMfjDw4EfSWOzhKnzgqGuc8q/Vzz0ulDreNVUb52nBeRy69QgNoZBTB
NkLdrUKBnlArvRhBXToQGW/s1eI/gobuHBJb7/fbpvsUtPYcDE2nUXAEsMlagn5L
BMHNzE3TByaWj0SqJtZAZvaQN2MdWV8ArHBPaC+MtR2C1VJIyl0mT9CdCu2NpTES
+FncKJ6/qplSBNSUJSfYmFLfEKVcQxvHMi1kp9jOGlVjPM3cOPKRpv8x69x/IPoB
3l82AikL+Ju0738oJ0Fp/IhfGUqpXz+FwUz1JmCdrcOby75RHomJuJCUBTtjXA4=
=lYkx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.15-rc4' into drm-next
Linux 4.15-rc4
Daniel requested it to fix some messy conflicts.
This patch add device tree bindings for Qualcomm slimbus controller.
Signed-off-by: Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SLIMbus (Serial Low Power Interchip Media Bus) is a specification
developed by MIPI (Mobile Industry Processor Interface) alliance.
SLIMbus is a 2-wire implementation, which is used to communicate with
peripheral components like audio-codec.
This patch adds device tree bindings for the slimbus.
Signed-off-by: Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
