mirror of
https://gitee.com/bianbu-linux/linux-6.6
synced 2025-07-01 23:53:16 -04:00
25330 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
4010e62b5b |
USB / Thunderbolt changes for 6.4-rc1
Here is the large set of USB and Thunderbolt changes for 6.4-rc1. "biggest" thing in here is the removal of two obsolete drivers, u132-hcd and ftdi-elan, making this a net-removal of code overall. Other than the driver removals, included in here are: - Thunderbolt updates for new hardware and features - xhci driver updates and fixes - dwc3 driver updates and fixes - gadget core and driver updates and features added - mtu3 driver updates - dwc2 driver fixes and updates - usb-serial driver updates - typec driver updates and fixes - platform remove callback changes - dts updates and conversions - other small changes All have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEqC+g8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynP6QCg0MnpRjOSFyAB0t9LWFng4rRikj4AoIpxvs2T GbU7NdPHU3fddq0KB+Nd =M+Ib -----END PGP SIGNATURE----- Merge tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the large set of USB and Thunderbolt changes for 6.4-rc1. The "biggest" thing in here is the removal of two obsolete drivers, u132-hcd and ftdi-elan, making this a net-removal of code overall. Other than the driver removals, included in here are: - Thunderbolt updates for new hardware and features - xhci driver updates and fixes - dwc3 driver updates and fixes - gadget core and driver updates and features added - mtu3 driver updates - dwc2 driver fixes and updates - usb-serial driver updates - typec driver updates and fixes - platform remove callback changes - dts updates and conversions - other small changes All have been in linux-next for a while with no reported problems" * tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits) usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API usb: dwc3: gadget: Execute gadget stop after halting the controller media: radio-shark: Add endpoint checks USB: sisusbvga: Add endpoint checks USB: core: Add routines for endpoint checks in old drivers usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk usb: dwc3: core: add support for disabling High-speed park mode dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs usb: mtu3: add optional clock xhci_ck and frmcnt_ck dt-bindings: usb: mtu3: add two optional clocks usb: mtu3: expose role-switch control to userspace usb: mtu3: unlock @mtu->lock just before giving back request usb: mtu3: fix kernel panic at qmu transfer done irq handler usb: mtu3: use boolean return value usb: mtu3: give back request when rx error happens usb: chipidea: fix missing goto in `ci_hdrc_probe` usb: gadget: udc: core: Prevent redundant calls to pullup usb: gadget: udc: core: Invoke usb_gadget_connect only when started usb: typec: ucsi: don't print PPM init deferred errors ... |
||
|
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
|
Linus Torvalds
|
d53c3eaaef |
ARM: SoC devicetree changes for 6.4
The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek, NXP,
Rockchips, Renesas, TI, Samsung and ST Microelectronics. These all
add new features for existing machines, as well as new machines and
SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V
based D1 chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core
like its JH7100 predecessor, but with additional CPU cores
and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini
gets added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs,
based on the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the
Snapdragon family.
Including the initial board support for the added SoC platforms,
there are 52 new machines. The largest group are 19 boards
industrial embedded boards based on the NXP i.MX6 (32-bit)
and i.MX8 (64-bit) families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three "Banana Pi" variants based on the Amlogic g12b
(A311D, S922X) SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs,
including the rk3588s-khadas-edge2 and a few NanoPi
models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete "oxnas"
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the Qualcomm
Sc7180 "trogdor" design that were never part of products.
-----BEGIN PGP SIGNATURE-----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=j12m
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
|
||
Jakub Kicinski
|
681c5b51dc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Adjacent changes: net/mptcp/protocol.h |
||
Fabrice Gasnier
|
21d018b75f |
ARM: dts: stm32: add USB OTG UTMI clock on stm32mp151
It's needed on STM32MP15, when using the integrated full-speed PHY. This
clock is an output of USBPHYC, and the HS USBPHYC is not attached as PHY
in this case (managed directly by dwc2 ggpio glue):
&usbotg_hs {
compatible = "st,stm32mp15-fsotg", "snps,dwc2";
pinctrl-names = "default";
pinctrl-0 = <&usbotg_hs_pins_a &usbotg_fs_dp_dm_pins_a>;
vbus-supply = <&vbus_otg>;
status = "okay";
};
USBPHYC clock output must be used, so it can be properly enabled as a
clock provider.
Without this, currently, when the dualport High-Speed USBPHYC isn't
requested by either USBH or OTG, it remains uninitialized when probing
OTG: OTG configured with full-speed PHY isn't properly clocked, resulting
in error log like:
[ 2.383138] dwc2 49000000.usb-otg: dwc2_core_reset: HANG! Soft Reset
timeout GRSTCTL_CSFTRST.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20230414084137.1050487-5-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
Andrew Lunn
|
380a8fe1b2 |
arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
The WAN port of the 370-RD has a Marvell PHY, with one LED on the front panel.y List this LED in the device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Christian Marangi
|
09930f1fb8 |
ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each port
Add Switch LED for each port for MikroTik RB3011UiAS-RM. MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips connected. It was discovered that in the hardware design all 3 Switch LED trace of the related port is connected to the same LED. This was discovered by setting to 'always on' the related led in the switch regs and noticing that all 3 LED for the specific port (for example for port 1) cause the connected LED for port 1 to turn on. As an extra test we tried enabling 2 different LED for the port resulting in the LED turned off only if every led in the reg was off. Aside from this funny and strange hardware implementation, the device itself have one green LED for each port, resulting in 10 green LED one for each of the 10 supported port. Cc: Jonathan McDowell <noodles@earth.li> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Christian Marangi
|
939595c79d |
ARM: dts: qcom: ipq8064-rb3011: Drop unevaluated properties in switch nodes
IPQ8064 MikroTik RB3011UiAS-RM DT have currently unevaluted properties in the 2 switch nodes. The bindings #address-cells and #size-cells are redundant and cause warning for 'Unevaluated properties are not allowed'. Drop these bindings to mute these warning as they should not be there from the start. Cc: Jonathan McDowell <noodles@earth.li> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Jonathan McDowell <noodles@earth.li> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Arnd Bergmann
|
7abad3d3a9 |
mvebu dt for 6.4 (part 1)
Add missing phy-mode and fixed links for kirkwood, orion5 and Armada (370, XP, 38x) SoCs -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCZD5nqAAKCRALBhiOFHI7 1SXJAJ4vFtG2lFU+gEn3zU7W7WyL5gbeZACfS6yvgsGdgObZHgoOqNkYJ3kOenE= =QA1z -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ+pJ8ACgkQYKtH/8kJ UifYMRAAq5efzOGArUUL8bepRC6g/Hvp/SQS/LKOq+7wS9b7v1BLSAH5I9rpYu8Z cV/IXcX7EhbKSpF0aYoKa+yILIvzPRTNgRN3CFw0fAnJpYtGMKsq4nGKasOkxaSW 7emCcp+uF97wamSQoIDgqzr2tVH3hmE2Xy54nMaspBx/VOoU9MWNjALKNdwhk8tE JEFNsrRPHfVfDUAIMVV2GkMsrvUw7nIbNPlrbgr4jGenV2xYwqq082U8jYgvsm9T bYLJX5hL85P9+xwdpx2XFR4SgYPIr+cnebZ8EnwdiXmJToCYkOYLDI72APzOa1xM wvPAzGgj4M6DJezn1sFjSwsy8/PcxTJ+EV0NYtL4LW+Ntm9bfoaSdiaqOB+PgZfg Mf7kh6GqzgSi1/qRtKrsZGh7/tZniGsje6hJs55slAuBleSF5EXWhF9ciPe8Ml0O 7RTpqLCTeamCJ5Pk3Kw+cHqBED3HheUMzXfVo3Ih+/4/YPdohc94MB5erYO/GSLM 6Q7tzkakAfQ4v98sNkdfCVU7wkwaTDGoCqcWrDKx6FscMj14Kr/C6XIIxel36lKB 2grYy/LglJbWjUkJzldTT2CS5YCM39QAQsZMS7nDy/fOlMDEdP8pcYLSLXDjJleE jpTx4l8nLqyordWEgDub9y7UuJXPHY6aDU4WuT+kfaPnGWA/hDU= =fhwE -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt for 6.4 (part 1) Add missing phy-mode and fixed links for kirkwood, orion5 and Armada (370, XP, 38x) SoCs * tag 'mvebu-dt-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: armada: Add missing phy-mode and fixed links ARM: dts: orion5: Add missing phy-mode and fixed links ARM: dts: kirkwood: Add missing phy-mode and fixed links Link: https://lore.kernel.org/r/87edohzfeg.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
7e8298565d |
mt7623:
Disable not exising home key mt2701: change node name to match DT bindings -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmQ5dlMXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH6/+hAAkUQOM4XGjny8D+Fv8GsidRMM lMYsUg9XKTnZ817MXs+0N1aBT0QklgmjH3iZPpG08NZYhKsd5ZBAL6cOz/dledlm CIC7bgqb8DS7iZRMGxtWKYh4uO+d4hkWQcxGysov2KyCShpfNvzraCOk6LVseRuy L6urxAnTNqGaAsMH6q3dC98GSGq70kcVLUlMwW1x2kLJ9evXA1zb3tXJF1lwO2fM I4dtJeAI0a4DlWor4A6V520FSM4y2y4bO7Ov5XwNTznEWHLDC2iyz1jVMe+GahTj yv1jQ5mlqdC5vIhj4aZGci6Ba/KjOYhKJXYDFER4bNX8j18Dyz7WIb3L+KPwSgy4 oIqwW37tXULA/9rnAUPdmyletR02I80lxe4y4aQYER8yydVH3pqufzpTWZjbH9c3 +hHyLLuSvNaLIco5pLk+SnaRaK7PLu5MA3x7WXw/xmcNkR0JBpjIKc8shsjeaPPq jozqoBD8x/XlVIDSlkg9Q+72G/ZOtSCnwaa0M5yAEiObKuHxIR+lpU5uvrtFsofP 8XeesswWEAoIHRVqrX9fuGFhtp7yW6tpx67hUI/gU6232QrGGTj7uTMadtdG5Yav m57sEnO+ZbInjQNXxxgMAEKCK0GOM+z2YiXSAizviwi4/vBnh6RTpDaM7z2H4qKB 8UIKRZF8JTIXkXZdSxM= =Q34v -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5t7IACgkQYKtH/8kJ UidIfhAAr24LXMjpr7TacZM/dbOU/a4cAXXk0w2HlBM5HrOQPKIxll18BCobLp10 4DxkjEuRycUTnmo/BYh7v0Dyrz7wYh8kBiBDn2r48B7aRXbduW95eFT4/FYNYARK aMsd+qL0bDvtvboInS2lGdK63MA72+y+gLKv4ttj9zT+32IipA7FXtfkXEV4PGxN CkLU1ERYTWgkOAsDHn2kc/ZqNYW78NVsjTXi93M+FSsL8BLpom3hB1WPBvyIeL4Y lbatNG+CD4Yf1SKZf5JegMbclfwVaJ8svinxmhod0eSQ8u4DcrDXTBmjLPUoFqJg hKg3cYIxtY67WFhwUYTCkhoYNiCdotUWrVn6ZgKgjxSUjLX2Te7UKLICf0yHfbla KXiRrYOyTz/qqukEVITPTNAgICvro3kokoKb0tNzA7y7wwqEIxcdInIZrbe0e17F oM8yZSqCkmI+GA5j5rlmnEl/NA66aBMDOOGhe5im/Aaq1pFf5G//8MAvAHWp3fky ZVAMfDRWLmsvKh01BzBAvf08/Lg31rz15AS9bSVxOVTkL2wFuE7EWUyyAudRoTi1 EjtWPc0v8UTOblaiRRDT/A98q74742wSEtcYbhSvfNg+EBN6LpqUrZC+eu4eF1a8 Kbu1X9sVnboNiEMjnuyJJYnFCJaWP711HV3I1WLvS8I3KxLwlK8= =mwJI -----END PGP SIGNATURE----- Merge tag 'v6.3-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt mt7623: Disable not exising home key mt2701: change node name to match DT bindings * tag 'v6.3-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt7623: disable home key on Bananapi BPI-R2 arm: dts: mediatek: Fix existing NAND controller node name Link: https://lore.kernel.org/r/c3b17357-e08d-da7e-def0-a7f9e0b95cb7@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
8158597fd0 |
A few more Qualcomm ARM32 DeviceTree updates for v6.4
This adds IPA definition to the sdx65 platform, and brings a few stylistic changes to sdx55 and sdx65. Compatibles for the two new Qualcomm Robotics Platform boards, RB1 and RB2, are defined, as is Xiaomi Mi A3 and the MI01.6 development baord on IPQ5332. These are all ARM64 boards, despite being introduced through the ARM32 pull request... -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmQ4vBQVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FraQQAKyY9KYmybeOmUboXT9ie2s3BRFQ TYQ91BA/mA/og1wQ/8QftnufPKohINa1VCe0bIpT1S+yWApphg4pfM1wfFwRqGy6 9dp6nO8MXTsliVNUzhw9/osqswh/XqKEpjk9gpLkQuw0QRfIaiU2t0/rcAUpiUtT +M3m06qw5eCiw8s3TGq+w/3aoK5Gpnh5ec63BpiURzOcV/DIq+4ZmTu5v+N0dQl5 jmbtPT/Ccowic0oTxu0OEa8ctrpBmdfs+eiOdO1hzigz6/4mHbakDW+AgNeu8PcH o6dYDU/9wZQOiRcyoX8kX+zVWXYj0BZt7P8+FlGMAEDEmLXLyGG2SbkZJTkHid91 n7+RT/pah6sInVaEjARe5qLIymsYxVtYCM2EBA7Ozo3oJFYFebNWbrZfoUkoPEl4 8azB6LJcOSEiVVoD9irK8EKBMce3d8EwDueTBeGUdyJlxWm7suyxoNEuI3onBSJn aq2xxUVoT/F6vPueNI3AP5ctZF0ZUjbhRUADMeZVo0n432qyKoCkte/bs1qUEAm7 82cSknnVMjAv8HfuwKhf4b1WlC762mfnyMKI2mmxLfWDkHyLejEEjfye3vb4fcW+ tVMpjbkQ49VlU1kJHGSuBif5d2c6cxGQr7QqBxpE94me21IZhCSfMLRWAW7LW3rl 3QLHq/gMiUtwFnVe =KMpQ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5eHkACgkQYKtH/8kJ Uic7SQ/9G4V2YILTPWef+hLHSSs6ivaL5ZgrZ7dhnHThhKOmF8qUZo4TuXVrmCBk +K6YV8zUI7YBIja4+i6/C2wlk6AbNEzqwAb6fJfXv9sixyk5wLQDrtWKnMar7WtJ N7ORMorx+Nn5oj0LrUf4Wvpfhnr382rZf0m0nltKMPBkrO6IDY2R2HsT4C5vzrQn B9Wa+7FA1ncKxlxIAEYp0aEGsy48tWh6KQgFwTmfvLnqOAZ+0fdoBQZBdvO3D1ky cK8q6gZKDW8hIGOX6ELxyGULN25ILnWQ+7wRoiecWF46zUh8eDWL/AiALbj7H916 S3uDQvq2T3iBhqIUBVHP50aNpLMQ+gz9fI0w1SlD8pImEb/hi6ovWe/fniLkj3Gr 6GTPtI/RyUNpHP5M3TIA5RKBnwubQnLnATFNB2IEIXtOUwxf1D5YZZGlXfKMOpAh AKvd5MPo176t0Ga+u1BBc07EV6zEqXxgho3tvyQB4xZpcZ1/Wub9SdSqQ3AWebEQ Bziuv2Swms/matnCw46+eUMyypHhvYwR0tZY/e0PpOSSkzVmsuS183sm0e41A3R5 PYS7tp7u8f9vOlIJ50RIqClD4XA9G0EuTSsKgTMd9QFpc45usDnV1VoltzMEgutU ldhSnfZ2VDk/gP4or8pmPX69ZDwxG64s/32WiKsJKUtG45dP6ZU= =TaSa -----END PGP SIGNATURE----- Merge tag 'qcom-dts-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt A few more Qualcomm ARM32 DeviceTree updates for v6.4 This adds IPA definition to the sdx65 platform, and brings a few stylistic changes to sdx55 and sdx65. Compatibles for the two new Qualcomm Robotics Platform boards, RB1 and RB2, are defined, as is Xiaomi Mi A3 and the MI01.6 development baord on IPQ5332. These are all ARM64 boards, despite being introduced through the ARM32 pull request... * tag 'qcom-dts-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: dt-bindings: arm: qcom: Document the Qualcomm qrb4210-rb2 board ARM: dts: qcom: sdx55-fn980: Move "status" property to the end of node ARM: dts: qcom: sdx55: Move reset and wake gpios to board dts dt-bindings: arm: qcom: document MI01.6 board based on IPQ5332 family dt-bindings: arm: qcom: Document xiaomi,laurel-sprout board dt-bindings: arm: qcom: Add QRB2210/QCM2290 and RB1 board ARM: dts: qcom: sdx65: move status properties to end of nodes ARM: dts: qcom: sdx65: add IPA information Link: https://lore.kernel.org/r/20230414023723.2411793-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
0a25e38509 |
ASPEED device tree updates for 6.4
- Fixes for romed8hm3 GPIO, asrock SPI clocks, bonnell eeprom - Misc updates for various BMC systems - Add AST2600 UDMA node -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAmQ3rWMACgkQa3ZZB4FH cJ71Bg/+I8/JSiGupExCkzAlmRbwpFkOXx0VEoWNclAWOTeQxBGm6mjG3w5hGTUm 2JB/+fSxO56jbuiUzIglm7fUbbHQJVunZLiIXqLi2PJlXJlqLgOzOABJow+nwPvZ utOwy52gs0aler/V9SSRDJIRol1UratwkxX1Xo8izNgaKxP3Ru4W5uITlDZvrEDb EAFxxpv7QsJQTssGmCu6N5FYd1C4pgsULzEY5kh5JagR4A0Ngygte1LhNc6xHYZL DREYCat9UMwP3ZX5J2xV9rooz+79dudYmXiFbP1yJdyx0XQLtQzNQccXfwEMT8W1 rhJdh9k/JDeDf4uKqtLq+LcnTWphk8Afy/WMU6h89T5gkB3CTekGe/PBoYQHndlZ cSxmp+0ZO9o/pEoq5tTQNVwizn08qVXr2iTr+B+t9WhyiBnjafCijdhi2d770D2N C0LNLlhAn+ao7MhcHr4wrUoUNoqjzFpvaTg70pcZlbFx/wi9QH1j9AeFQTxMbeS8 klz44DWknOdRX5AcQRf/V+eRG93jlcDbdu7grvBJ2fwXlpwcUiyCrzETNzC3aiww MpSvBNnnYS5/PxJsK2xQ2EowuZ1J/xNonQEwZA1w0krhVZzspnXfi5X2h+oB9n+c 4thCUytRAnlvhQv5Sk13Ycx7A2C4thHDTNovvQzJ0xbFKVHg2vU= =sPZX -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5eEwACgkQYKtH/8kJ Uiex4w//f2oY8GQO5F6wVALJTVByjhRuDakc07E6yZLzgjEk4wVKLr5t0TUiAkVx on7TqfomKSLgZxmRD1EqdQkMiCLqpv8HsdyYNm2U0uqXo/gBDSGuCnAFzQLa3cpT OfnuXQZCsUbHaKRqzhFp08GLmlkjTQXmczh0ejG/Bv+Ethl1XL+CcHftvR2aeZJx S3xC5UhgvE+s3zU+67q4r1Hhv4RPl2FoPsL9Y+JExkkmHlHnxOW7tBt0POijZ3Pa iW67LISEkYqg64zQCf+htfKyz45YAuweq8D8cy/RM677hbCnSolrmxjr4CcFhIwr 5EqtLOVx2VKRbOOViYyYNtvSg0c8xXb+9VKja9Qx8tnjd4yb26DL72tlGtBCzJvX RUN8dFBF47rkzoPhpImpzliQIipw1aAaFYalCwSUUsKMgXil6Y97Edhr5A2AOokS wpi8pUZ5v8OO4nDIF3we1sK1qRf+BsfiE5IND8lnYeUfuc5RterX+jrDVbeuZcQJ J+hocUmGY7OXgIpvdWEunA8OEzwgVXAcFdKfvMRffvP2WuieqxJEPbUH4hacx/rx SsPgwyXA+/tMA9S6zE5SVefPqxwP0FzdCuG299ELtB6LLlEz4ePUWDvh3vpXiLvb FVV8z+xg5DOIbj5IhUchvvBV0MHAOBb9ihATHNIa0FEWpgLS0s4= =BuBw -----END PGP SIGNATURE----- Merge tag 'aspeed-6.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt ASPEED device tree updates for 6.4 - Fixes for romed8hm3 GPIO, asrock SPI clocks, bonnell eeprom - Misc updates for various BMC systems - Add AST2600 UDMA node * tag 'aspeed-6.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed-g6: Add UDMA node ARM: dts: aspeed: greatlakes: add mctp device ARM: dts: aspeed: greatlakes: Add gpio names ARM: dts: aspeed: p10bmc: Change power supply info ARM: dts: aspeed: bonnell: Update eeprom size ARM: dts: aspeed: bonnell: Remove MAC3 ARM: dts: aspeed: everest: Add reserved memory for TPM event log ARM: dts: aspeed: mtmitchell: Enable NCSI ARM: dts: aspeed: asrock: Correct firmware flash SPI clocks ARM: dts: aspeed: e3c246d4i: Add PECI device ARM: dts: aspeed: romed8hm3: Fix GPIO polarity of system-fault LED Link: https://lore.kernel.org/r/CACPK8XfmK5S=1PQjBQHb6daDR3qTWN-_NLoXP7+ZDCk13wDxcA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
0b3751dc8d |
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.4, please pull the following: - William adds the new-style High Speed SPI controller node to the BCA SoCs -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmQ0mX8ACgkQh9CWnEQH BwQhjhAAyHMwI6uMjnEHf150ggtuckE2Lijz74c0O1RmcINL+fQiiEVWLjO2ongv n+hNfndWynGjxBpkj2JSwUaSKTuxJMGqb6k5ky1O8+DQUpagKArXMRXkwU4V/ZAk KU2JtQ0MA0ACzBKJh4uIftKsYwZ84tdHjNX+gUvex8qp0TBNNj+3bvPs/zcoY7NB BHpigD7NAPlnKcUEzSlIYcief+az2KMl/d5+UKIE8nXh+DPju1PHsxLxQK9UOuSN kmJ9l/yjSHu5eyZFtUIkkT5DybBtWs73T9lN7QPp2AP/caxsJFInlBaHTQKRGdQa 9Sln6cGxPMvwHYFDLXplX8vNprad5g1ErR0dJhb/6PhAUY7DnnhEysPs+odhSKgD BUHIkwDTR7xGhTe/7SfCFvxF2xXCAgS+cakCPv+s0+1DAR4MQW4DIsKHLsmEmOlI AeIA67TGxBmfihH1lioUC2YVaEtSntScJ+Kf6WRF/bcCcylSAKYAa3PdCZ9ZOAbL enJXV0X0+UihSTPMzdBFncHfRR7hNaCR7PP7pBb65i8mvI9WSERHGmdC+/FkQDMY X/CJBH28vm+aAFkei2ZxXjb6ZGRE+n/8oTUP+pqs1S93k3IET8a7DG7BGIEYIcy3 6UCYj1rvc7WhSTxzRxqhevDVzIQCm/X2x6qzcWVbgRdDQnRrCEs= =H9IN -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5eAIACgkQYKtH/8kJ UifB9hAAiTgIFHleb4uzY4ahUVMl9vhMlpDepRqh57T+WjCyKFTu0ybMzV6BWMTQ glMlBm1xAO7h9L9WMnoIrCLqjuyCifob6Q9/126KuKhbwqzpVxUStvxnhOzHlv1K 54K+LS5gl2CKNkpdBQFGCdPsWvL2ICCc6DUS1DUuY+8zZKwGG73JLqeodAt1Juhr UCWb2qewAWRi16h9L9ZGTrsOF90k3hDAenT77YGLnCBwOn0N3umO+lGXtqd+PJ4B FkLnv0sEC4bsJbp9rxfg7zGZdgdFznT0257SmloYmhWCdWa5+DuKIOZ6Lblh9QCi 22M+iM9vM2K99XfDo0Kr9GDL9Dcf2e4Ly2on3RZUVT5o+C7bmt4C9JGCCxlR5SJG Swne3l2tfExHkPS3SZyKjHKuv68Mj055HBldBVedktX0ZmalFnT0HitVqTflx4+j HWbRaPL0YXd7lN2rdfudbUtwGrrLjvPr/UhDGHfRR9jsHX6b0UdVQbdRatfzdAiO sWo0bGlbNZYP8IPK3/OlQyhJdVZlXKUIx6ZGISWYyLR0jrRDbnYVhs1a72SJfC/e Hxn3iQOI/vDw5+wcOz0oYhojKHgN/SSR9WwES9tSpyp6aKbRzKSGiADihAIx3psU aKVgZeLYZGzABza6zgoE/0U2Sa8mChDkkzF2FnFLUtXz4Q/eZFs= =HvvQ -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-6.4/devicetree' of https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.4, please pull the following: - William adds the new-style High Speed SPI controller node to the BCA SoCs * tag 'arm-soc/for-6.4/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: broadcom: bcmbca: Add spi controller node Link: https://lore.kernel.org/r/20230410232606.1917803-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Fabio Estevam
|
325ae154b4
|
ARM: dts: nomadik: Replace deprecated spi-gpio properties
As stated in Documentation/devicetree/bindings/spi/spi-gpio.yaml, 'gpio-mosi' and 'gpio-sck' are deprecated properties. Use the recommeded 'mosi-gpios' and 'sck-gpios' instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20230407162504.1683422-1-festevam@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230410220300.2431524-1-linus.walleij@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
a8127d2aae |
Qualcomm ARM32 DeviceTree updates for v6.4
stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need to pass this information on the kernel commandline. Ath10k is wired up to read calibration data from the "ART" partition. PCI I/O port ranges are fixed on IPQ4019 and IPQ8064. Supply clocks are defined for KPSS L2CC and ACC clock controllers. Supply clocks for the global clock controller are being specified on IPQ4019, MSM8974 and MSM8226. PCIe RC support is enabled on the SDX55 T55 development board, IPA is defined for the SDX55 and a number of cleanup patches are introduced. Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and MI01.6 boards. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmQ0MIQVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3F64sQALPbH9x9FBLHt28OCiYPT9Q7gUZ0 aIg46Xe37HJYlZVPf2KsgrXxN3uOl3l+KzzVmmFeCajqrZA96pRxVWI5Jvn9mXaE Q1TVNohGfXKFK4u4/QjjS8ItJLzRyKqHSI6kIiia1pOd132jkHszn1x0pXdJVldk p0Ep5jQ6Ugf9SMBtLtcklhS/FmpCP1fjgS/LYWoTT7GvTDO0uhmNFZL6gZGPj8BD u8JVy0cstIGpuWS4zwtinYCck5KhzOEiQ13vQ++bUmc9Kodn+jH/ldu74LBO0X2Q R2hLrt7+xIcM2E77fRtfEXijQvqbx4vQ/oUMGzoBAg2mHPsl6mX4J+vFhKh0ryEu IeOJ0LWCaH4ibqE+kWaIz5IeVLEnYb9g1cySbzDcO4fT+zJlsgOsaY5fwv4q/kjE 5N+ZKcXgoFD0/p1vCBSj/vukjmPpZ0/520unJzx4AE7DwwHSJNxt2bqhqLDl9yoN qRG2V8+/tlDCjrXiyLizezdDqOJzVFdmBxHkTdg8JtjY7167FumYboyIDyvM1/zl HUmL999+/isouHBUYvt8AI3G3P/MyXuthRDR43wnbtrG1vn5ynCclUo9f6S/BUBt t+kuXEONdaBDrTUxSfChA1YyzCIRj4h+RXSiC0jzWTHrW7jUZU9JHxynRhyG4Ug7 /TK2FC7BZzClbDZf =YUEe -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5dvYACgkQYKtH/8kJ UidHcA/9G4j2JoYN/Vx5zGiFhwvgzdG5x1UX/ZzkBK3Hboe2Z3U1imE4zdroEpV6 qp4jp/vmahmKZTIn5AZjQBzsg/l1bM81lQXS4lhA0d+RTvjxIvTrCL7M/CHzxTNz QJGnhE0PeQ7m5Dqj2i/Tyy/2UXJjwb3qCIV2EynWhAay6qhE/QDTuNl/Wuh2xNn/ wEgpyAUtCgYoyqCK7jqo5TA40CzKAO8girNep1HOToaHOoUs4u8uKCqlGUGBgDoE ZMdGd+LSBEM95oVY9A0TSCbgziBPZpnxciMcIDv7vKjlPls4rTmYLCb6QlqxjYfO CTcE4+kDjLVDcO/pbA5FTSo5oIPSLxIuntQJqUIQkYmTSZ0qDHC1ghQkJ0guGT1G gr4E6u74jr6xJHXK4bcnpfgXN6d03DpR6LtVoBm1XoswyvpDT6aW2Q/NQPIl2c7P R2S07is5k3Q3A5Oo5kaQJMbAKvddLuF9K8Kdo9a+6DYJU2qWbJDVorfMKYeRwKTt 8zWgR3wpPNjzFLAf85qyVq/F8zWlVkbadVwMVj9edx6A/TK/LSZX+0VFfy/TpDnC Tx2AZdyMHL6SC96OXjRCZjsh+ttgVzdgZ2VYfpSe+d5Vf2okAs5cCezfDayL9Bik 9DuTM6kq2uCAdF4udN3K7462ZeWxlfs2AHZWtcWNrrLv4riMuek= =a7tv -----END PGP SIGNATURE----- Merge tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM32 DeviceTree updates for v6.4 stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need to pass this information on the kernel commandline. Ath10k is wired up to read calibration data from the "ART" partition. PCI I/O port ranges are fixed on IPQ4019 and IPQ8064. Supply clocks are defined for KPSS L2CC and ACC clock controllers. Supply clocks for the global clock controller are being specified on IPQ4019, MSM8974 and MSM8226. PCIe RC support is enabled on the SDX55 T55 development board, IPA is defined for the SDX55 and a number of cleanup patches are introduced. Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and MI01.6 boards. * tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (28 commits) dt-bindings: arm: qcom: Add Yiming LTE dongle uz801-v3.0 (yiming-uz801v3) dt-bindings: vendor-prefixes: Add Henan Yiming Technology Co., Ltd. ARM: dts: qcom: sdx55: add dedicated SDX55 TCSR compatible ARM: dts: qcom: sdx55-t55: Move "status" property down ARM: dts: qcom: sdx55-t55: Enable PCIe RC support ARM: dts: qcom: sdx55: List the property values vertically ARM: dts: qcom: sdx55: Add support for PCIe RC controller ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane} ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node ARM: dts: qcom: ipq8064: Fix the PCI I/O port range ARM: dts: qcom: ipq4019: Fix the PCI I/O port range ARM: dts: qcom: apq8064: Use 0x prefix for the PCI I/O and MEM ranges dt-bindings: arm: qcom: Add ipq9574 compatible ARM: dts: qcom: msm8974: add correct XO clock source to GCC node ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node ARM: dts: qcom: rename kpss-acc-v2 nodes to power-manager nodes ARM: dts: qcom: add missing clock configuration for kpss-acc-v1 ARM: dts: qcom: add and fix clock configuration for kpss-gcc nodes ARM: dts: qcom: add per SoC compatible for qcom,kpss-gcc nodes dt-bindings: qcom: add ipq5332 boards ... Link: https://lore.kernel.org/r/20230410155226.5127-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
17e26de12a |
Renesas DTS updates for v6.4 (take two)
- Add PWM support for the R-Car H1 and H2 SoCs,
- Add slide switch and I2C support for the Marzen development board,
- Add SCI (serial) and Camera support for the RZ/G2L SoC and the
RZ/G2L SMARC EVK development board,
- Add IOMMU support for the R-Car V4H SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZDO9eAAKCRCKwlD9ZEnx
cDqrAP4wBrYlD0ih3wMZbcrHAZpIfhLLLlUBDT0JfYYy/mSGXwEA69C5A00Gx47o
R4eLM6rSfPKw4KNJcLFwO5eqMsPzEQs=
=uYv8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=UIZB
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.4 (take two)
- Add PWM support for the R-Car H1 and H2 SoCs,
- Add slide switch and I2C support for the Marzen development board,
- Add SCI (serial) and Camera support for the RZ/G2L SoC and the
RZ/G2L SMARC EVK development board,
- Add IOMMU support for the R-Car V4H SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779a0: Revise renesas,ipmmu-main
arm64: dts: renesas: falcon-csi-dsi: Set bus-type for MAX96712
arm64: dts: renesas: r8a779g0: Add iommus to MMC node
arm64: dts: renesas: r8a779g0: Add iommus to DMAC nodes
arm64: dts: renesas: r8a779g0: Add IPMMU nodes
arm64: dts: renesas: r8a779f0: Revise renesas,ipmmu-main
arm64: dts: renesas: rzg2l-smarc: Enable CRU, CSI support
arm64: dts: renesas: r9a07g044: Add CSI and CRU nodes
arm64: dts: renesas: r9a07g044: Enable SCI0 using DT overlay
ARM: dts: r8a7790: Add PWM device nodes
ARM: dts: r8a7790: Add TPU device node
ARM: dts: marzen: Enable I2C support
ARM: dts: marzen: Add slide switches
ARM: dts: r8a7779: Add PWM support
dt-bindings: clock: r8a7779: Add PWM module clock
arm64: dts: renesas: rzg2l: Add clock-names and reset-names to DMAC nodes
Link: https://lore.kernel.org/r/cover.1681113117.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
2925732f0c |
MMC-aliases for rk3288-veyron devices and some dts node adaptions
for yaml conversions recently merged into the drm tree. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmQyBQEQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgQ0XB/9l5539KSxSHBmaPjBmFHaPpjthBHR4SzVp /xaa7ReOYJWpe4gT2u73S1PQQdGub84TD6x00ImIwJoUlbAKE656skgqDe4dkzMb WN29KFBYaFZ2vAyvgM4RTDfNtadyrQeW9PO8ZDQAJ5Ys4E9bfz5U5oy1f3MyTQ5I wmYOPTdtFGrzJeRmYa5o2fiHdj/FBUc0G5Vvg0qwIKaDR1NkhmrNXcwlpK/uP6QB +o2icz61jvFMIdBgv9G7AApofIp9x7LhpesL8C5w1oj+cFINGHhjlca1L98TGA9c HDutfCqv4GElCy325CfgSgCnZrOyfYQZjCwE37cmqIbZElLJpLFR =fEIi -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5dYIACgkQYKtH/8kJ UieIRRAAysy1znBxAwVOVVBxWvnllkeomG3nPlG6Xq6oDk89G9KrDeuuvPYta8/Y BeFZd+lNm35p5MJMUSGCvcxTNauoKwf/KF2F3WcFyFEqG8kVqD8IJhiD5LGKMnWE 04GYT0tV/ikX/QzXEVVzZmsw5GGxpYv9G7xvnNe5JAJmfhyavUmWGQF3Or5x7cCK sBmIZ4DPymEM2RuACZqS5dkjRPei64Gc0C/axkzZNL0LQQ48MgEdUQvWgo8KTTIr mSeATRk6Lui3/ajSGjeSbqzQiBp/A+qE1/4jZzVvvuhZ/wj5EdkKKUUa7d64wHKS 7KRv6Y0/c1nbETm0Olaw43L7rRn1lBDl+0WkdIAgEPsqp87LJpdPmzyTWLWA8A8N vyLtkMpvUymgLuELdUuGxYzy+9l7E2qYUuTJN6HzR8xkOBku/B+HTS0eYfygElwn 7LupHbef/AHuAdY7eCSr/tBtXEZyTklvMEAMXR9ATqg1cavqi5nW5IHUH1t4mTnS wMu/O5Md59R90gqJ9xv8wOKRe+i/LJnDbmKbY0tWBq/Jh9wBW8VvdrXdVHfZ95lU hbGpEFM+vV6HtzrJqcGSGQBtdpvoR/k8J5Yqc7D6U7xfzhsr9jDZo5cOkyWYz5nv 9WbJqZaag1F3OEYso+WQ/la88M9INch59+MIfFxCO5+c+fuZiwA= =IDjR -----END PGP SIGNATURE----- Merge tag 'v6.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt MMC-aliases for rk3288-veyron devices and some dts node adaptions for yaml conversions recently merged into the drm tree. * tag 'v6.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: fix rk3288 dp node ARM: dts: rockchip: fix rk3288 lvds node ARM: dts: rockchip: fix rk3288 dsi node ARM: dts: rockchip: Add mmc aliases for rk3288-veyron devices Link: https://lore.kernel.org/r/9713202.NyiUUSuA9g@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
8f09b5ec41 |
- added D1 crypto node
- enabled DVFS on OrangePi PC2 board - added GPIO line names on Nezha D1 board - added suniv USB nodes and enabled on licheepi-nano - new suniv boards: PopStick v1.1 and Lctech Pi - added Allwinner T113-s DTSI - added MangoPi MQ-R T113-s board variant - swapped DMA names for A23, A31, A33, D1, H3, H5, V3s -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSPRixG1tysKC2PKM10Ba7+DO8kkwUCZDFhwAAKCRB0Ba7+DO8k k4J/AP0UdafVPx8HFMiXUBABSdrSVvwDWDhXcqeMiWQXZ6UWogEA7gUTOZ+ZFr2u /GDOiM0CscDyQlbHWEYx5tkAhfBUnQU= =Sv3O -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5dGQACgkQYKtH/8kJ UicCgA//fqzpR1CLYH4xCF6jIiVtTEPAEU615BA+AJAWg9mACWALutARbTmvOfJo jUpCyNsVV6vCH1kGLBj36FgkVOTid691Q7lEo4lrR8Mg9hV3S+rBlbgbMD6LRX54 qSmvDVxKh3AFcDvbfxBYMKRBo+kq4samrbin0W+7E6C7Q9hqEzDGMgMRTrAGyRiF H3w6Anjbm8jdUddMGHTNveGVJZG8VDKAdOeDVzvQMACg83S4CgQWSyH/AQhq0OtG kpCMS+d3/0ElO6to0yXt5BlrsfqqmFk2lc9ovDfVUU3Z+uNOfc+V83w2mqt8+jeF Y2+kptB0LeEWwqDxFJeAHPIztPlhfZeqszsbzfAPoxhbqg1FyHGqtdsuAj/I82TD dnDVoipEWJHOf3Go3TDgz9fetsRidett0ZfAxQy2Z1/5NTRDNfFY2hSJbf1haEvO 4BOm8ZpVDHPY/wMbinu+4kiFmzu6eVMUITkdNjYAzx5W5TkPK7comTNhDe3k97dD gWyToAsAjbs6jxsRYI4M9DP7y0YR8hFuOIOMt1dibXn/S2VkteboBhID8hxl1fuY yf0p7PWkyk5ev9r6+vZScmlwDqfNXingd9Bdmr5xaRl4kIKCVO6oDJpoQT/O2dY8 kY3YIklnbJgiDsgNFJNSYqWMI+xFO8aQQDZFmDf5Wh2/3qWnvWc= =Dm8i -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - added D1 crypto node - enabled DVFS on OrangePi PC2 board - added GPIO line names on Nezha D1 board - added suniv USB nodes and enabled on licheepi-nano - new suniv boards: PopStick v1.1 and Lctech Pi - added Allwinner T113-s DTSI - added MangoPi MQ-R T113-s board variant - swapped DMA names for A23, A31, A33, D1, H3, H5, V3s * tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sunxi: add MangoPi MQ-R-T113 board dt-bindings: arm: sunxi: document MangoPi MQ-R board names ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi dts: add riscv include prefix link ARM: dts: suniv: Add Lctech Pi F1C200s devicetree ARM: dts: suniv: add device tree for PopStick v1.1 dt-binding: arm: sunxi: add two board compatible strings dt-bindings: vendor-prefixes: add Source Parts and Lctech names ARM: dts: suniv: licheepi-nano: enable USB ARM: dts: suniv: add USB-related device nodes riscv: dts: nezha-d1: add gpio-line-names arm64: dts: allwinner: h5: OrangePi PC2: add OPP table to enable DVFS riscv: dts: allwinner: d1: Add crypto engine node Link: https://lore.kernel.org/r/20230408125156.GA17050@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
0efb9fa003 |
i.MX arm32 device tree changes for 6.4:
- New board device trees: Tolino Vison, chargebyte Tarragon, new revision of the IOTA board. - A couple of imx7d-remarkable2 update to enable cyttsp5 touch and BD71815 PMIC. - A series from Oleksij Rempel to configure Ethernet reference clock from device tree. - A series from Stefan Wahren to use label references for i.MX28 based boards. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQxJLYUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM4t4ggAigOtwEXTRhhC7IZvZssp2ZlKhIJ7 kBKRCv1tZyyDIH6ZSrEiysjGALSPii/FrEg+Xr09ye/VPCP1kQSmXrPUpunTTqHT 3MEABv+uTH7IcLdI0g7CBUkVL+pj5sPmzQw48qA5Xrgfb8ip6HaZ4SdmoiemhrnK oQq9YRfSaOHGGVxc9SIrNPueUXZ+tUMjpWs5oi8ITm2EbMCNxwFmOCtQM038enXO MPG8COX2IxWyhCg6sqV9Lb2wPv0l+cKF2YiDKMvENjFkoUhDKgG2engr50OjHWl6 rbzaGsgjmZaq4uNhHdCbBNd849O8pH+dbT1Ix1jYAUe9r8TFKgcWp+r6xQ== =PiES -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5cN4ACgkQYKtH/8kJ UicG7w//bCBxm2ZmSkpPZWoOmDMRq1OG3O35KJdZgtwGDZH5E4UMN/j0rnvVCKR5 pqNQHfG4f7OfTk2lq0HDfWFifaXmEJyOXXtCxYWoS5fIXgzOgb6lbcQNRqzNMmXX WtE6Ut8+lOdoB45fDP1Zgy1qP5w6IOHvOcKaTXs0jNs4KXhLu1i+i70PuEG/jkjY vt9W1hVVziM48KucbXQ9FAmSnZ4Pr0mHlFggamZRsRmx5dfioOsWyy4miVZy59PK 7v6s6dmJ7LBlxM+nrtWYGbRHv7agociuCGF8gZwaKOl34OuuBYAda5F+hTLrx539 oAi1ck7GblWklPp+wMMgwp6eT7jIX/TmF05lMvMnPp3aczLlUT7UdkweruyMS+04 GPt+GNK025sR4FNIFCybOF6/oUSe7v2nMBLDDfe4mKltpg0k0LcgR7AbRN8qMVYB Ekt68WJPDP9sRZ1tRyq0F6CKLdqYf828o9zCrSc/QWqmZeIfv/FubMkiJB2PpRVf fZfzXtLOudmddSdlSY8YCKm2JG/Z2QLf7kIlg/W4Ue5iaGIaX5YQjPf1LG6s3RKf hPDbQTk28lj4XajAdQPdv0Dl9KONiqTeKQ1G5L6MSwTFaHnMpxTVlZNsKT2LSmXo 7fgsksfkxN4CRXlM13lLdVdQprwKXyx11iYfebdl8V3vqLst3lg= =Pr0F -----END PGP SIGNATURE----- Merge tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm32 device tree changes for 6.4: - New board device trees: Tolino Vison, chargebyte Tarragon, new revision of the IOTA board. - A couple of imx7d-remarkable2 update to enable cyttsp5 touch and BD71815 PMIC. - A series from Oleksij Rempel to configure Ethernet reference clock from device tree. - A series from Stefan Wahren to use label references for i.MX28 based boards. * tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits) ARM: dts: imx6ull: Add chargebyte Tarragon support ARM: dts: imx: Add devicetree for Tolino Vison ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board ARM: dts: imx6dl-yapp4: Remove unneeded status "okay" ARM: dts: imx6dl-yapp4: Move status to the end of property list ARM: dts: imx6dl-yapp4: Move phy reset into switch node ARM: dts: imx28-tx28: add SPDX-License-Identifier ARM: dts: imx28-ts4600: Convert to use label references ARM: dts: imx28-evk: Convert to use label references ARM: dts: imx28-duckbill-2: Include base board ARM: dts: imx28-duckbill: Convert to use label references ARM: dts: imx28-cfa10036: Convert to use label references ARM: dts: imx28-apx4devkit: Convert to use label references ARM: dts: imx28-m28/sps1: Convert to use label references ARM: dts: imx28-apf28: Convert to use label references ARM: dts: imx7d-remarkable2: Enable the rohm,bd71815 ARM: dts: imx7d-remarkable2: Enable the cyttsp5 ARM: dts: imx6dl-yapp4: Use reset-gpios property name ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL ... Link: https://lore.kernel.org/r/20230408101928.280271-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
83f91bb49c |
STM32 DT for v6.4, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add FMC support.
- Add QSPI support.
- Add 8 UART instances nodes.
- Enable UART on STM32MP135F-DK:
-UART1/UART8 used on expansion connector.
-UART2 used for BT.
-UART4 used for console.
- STMP32MP15:
- Add STM32MP151 support ( documentation + machine).
- Uart fixes (slew rate, aliases clean-up).
- Fix GPU YAMl issue.
-----BEGIN PGP SIGNATURE-----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=hidE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8J0u
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.4, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add FMC support.
- Add QSPI support.
- Add 8 UART instances nodes.
- Enable UART on STM32MP135F-DK:
-UART1/UART8 used on expansion connector.
-UART2 used for BT.
-UART4 used for console.
- STMP32MP15:
- Add STM32MP151 support ( documentation + machine).
- Uart fixes (slew rate, aliases clean-up).
- Fix GPU YAMl issue.
* tag 'stm32-dt-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: stm32: add initial documentation for STM32MP151
ARM: dts: stm32: Add QSPI support on STM32MP13x SoC family
ARM: dts: stm32: add FMC support on STM32MP13x SoC family
ARM: dts: stm32: YAML validation fails for Argon Boards
ARM: dts: stm32: YAML validation fails for Odyssey Boards
ARM: dts: stm32: YAML validation fails for STM32MP15 ST Boards
ARM: dts: stm32: add uart nodes and uart aliases on stm32mp135f-dk
ARM: dts: stm32: add pins for usart2/1/4/8 in stm32mp13-pinctrl
ARM: dts: stm32: add uart nodes on stm32mp13
ARM: dts: stm32: clean uart aliases on stm32mp15xx-exx boards
ARM: dts: stm32: clean uart aliases on stm32mp15xx-dkx boards
ARM: dts: stm32: fix slew-rate of USART2 on stm32mp15xx-dkx
ARM: stm32: add support for STM32MP151
ARM: dts: stm32: fix spi1 pin assignment on stm32mp15
ARM: dts: stm32: drop invalid simple-panel compatible on stm32mp157c-lxa
ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15xx-osd32 SoM
Link: https://lore.kernel.org/r/63987ed6-2813-15ff-e058-73312a730d61@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
31e985a2c4 |
ARM: tegra: Device tree changes for v6.4-rc1
There are several fixes and cleanups here for some of the older Tegra consumer devices. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmQuvhoTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zobbQEAC0RtffSTq2Q1wi3xQ0980TumdwXN04 7kmhc3Dyu89DqSgITSPlqrDj5TDiZ6vNEU6+tmaOECeURgKn7wNvBg1dFshJBXPB ByGuaFHC3onj1BDWWzQj25IRykPEm0/a4DPPNi4iFtVrlHGppt0NNDauKzmPupyy +rY5QKKwQZQAbbN2wyJdYXH2G+BmyPRl+ZQ4+vFf8T5i1pf/1dKeIWLnD5LLe69l 5ktoP+BqsznEPb1gtRDvySJpwQR63BLxbL5jKt+MoLe88Phtk6dPIgVd9+556E0/ rs+sP66lf93IvjCa7ghXdnPNTzPPDwH2a/ICHRTHJZLH/Hy++3qNTd8fxM9qnUhg p32UUWKxIMloUAfxWjUlu0RLNhDdQGHw6+6FuRyf4Z8hgcFDnsDNH9eXxiGQyan3 OEXzW2GluuR0D5JLK56vT6BNNOfZc+jkvMCjI3SOK6S5si6fX4HBGK35fYfgfapM kyjGWtHhltF24bJ0LdtAuMMX2ZSPV1ZTYaF5mI4omWoVKCBpufnv9QtOKjcRrBao Xqd5H4bk0/Sfz4F3bwuQl7fjnw/VnBGUqtxpXVhgls4DemPm4GZ5MGMIdzN6EMbc X44E1Mc9zDTygFn7ACB4rpU6ntRaFLqrmGYMNf0CjZYKHcKPB+E7yznb4oX5Df7A 8/pn7GdolKvGZg== =KeTq -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5U0IACgkQYKtH/8kJ Uie5nxAArpIB/9Fsuo1IyRoEGJxr25UDMFF5Vy7icAuRqBNHb9bAmzOs7Z1GaTan MJGCuVdB2fnCxlHXAkbDMvUJ/vfW8XFBl15/9feOr9qh9pVdn1r1KsKHD+X/xEMi LVNHuZUi6H+liP1sD0dZj2NRBq7Pcu95c2KjvDKdozBHnxiejTZT/WBVLfssvBXY Q8Gls0PzShiZk0paTddhE7LQdiepsJjZIhTByyqBld9limtAAX/MC7OPNnDoholQ 9AYMGRb9hizQ0btqn6wvvSVgSdomI9s7HyMz/4VIYan6Dnbcj85D3T2+feO7nuzR jGHlOrBZS6jfW/2T+yHLe3P28Nv0CiasDFp4hvIcrsv9vJ01uiSHVT2o63p0IKT+ fnpp9V1uQnETPU5HVQDfqmz5lbsSiY2hfRq3q0yLM1KQLi3J8ZYGjMbt1XP6XFEx VTLd0M3Jtd+6Ly0ECCfQbdcGhM9+NVNiEoCbOUSJR9L8ApX2bIyP101t+fY7WU5P mgg9xYZnbksCgSZWTkkBQA9T98012nALLaMl0yqgvj20T5YbszNvyJTlqvJsCDMq 7k9O8xYKsgLAIhUfXmixVkf0x6LTiQCJ7PQQDKiK9/76vK9SADdqGRceSgfORYFa KymWztwx6HZTVxwPMHHPgqpSJzHiQReJ3QzCZxActYuANl4gDBA= =4aAb -----END PGP SIGNATURE----- Merge tag 'tegra-for-6.4-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt ARM: tegra: Device tree changes for v6.4-rc1 There are several fixes and cleanups here for some of the older Tegra consumer devices. * tag 'tegra-for-6.4-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra30: Use cpu* labels ARM: tegra30: peripherals: Add 266.5MHz nodes ARM: tegra: asus-tf101: Fix accelerometer mount matrix ARM: tegra: transformers: Bind RT5631 sound nodes ARM: tegra: transformers: Update WM8903 sound nodes Link: https://lore.kernel.org/r/20230406124804.970394-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
cfb6bb3831 |
Samsung DTS ARM changes for v6.4
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
-----BEGIN PGP SIGNATURE-----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=PGBg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nYVY
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.4
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4
ARM: dts: exynos: add mmc aliases
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
ARM: dts: exynos: fix MCT compatible in Universal C210
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420
ARM: dts: exynos: move MIPI phy to PMU node in Exynos4
ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250
ARM: dts: exynos: drop unused samsung,camclk-out property in Midas
ARM: dts: s5pv210: correct MIPI CSIS clock name
ARM: dts: exynos: correct whitespace in Midas
ARM: dts: exynos: fix WM8960 clock name in Itop Elite
ARM: dts: exynos: add ports to TC358764 bridge on Arndale
ARM: dts: exynos: drop fake align STMPE properties in P4 Note
ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note
Link: https://lore.kernel.org/r/20230405080438.156805-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
43950556b7 |
Lower sd card speeds for two boards to make them run more reliable,
missing 32k clock definition for Anbric xx3 devices, missing cache-levels for rk3588, fixed rk3326-board display supplies and more dt-schema fixes. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmQx/6UQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgYMiB/45skI/LcajSjuqIJpAC+cDeCs/IaQb6aev 4fnwBRYgb836JvThTGeOn4KRe2avnZMfyjn3IlkHhYBHtLukS8jcuNuU+T+oD1/n Yss63kUSbMCvNl13uCSz/dqsaFZJ1x8hHth0b19PlGWnnBgtzWWWScr371m+PsF6 2x2dnteRvQcUyWa8/5Xavgc8bseMds2SiKEc9Y58MTwRVL/pqfh9AFJhsWRJYFsN x0SU+Gwopg2qW+Mfdm6DOK1m08Vu6Uaw1zftF06/oAnDqvYMiVSWfsFIpW5eEi/T kb5ovzTTDwnLz/n8jkG1ldB7hQY362NQjyIc/GoUab/03yxyFE63 =JS4f -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5PlAACgkQYKtH/8kJ UifHPRAAwF4jqjWejgzFnHsB7RPmjvUtvuobU0gmI25HIjKnWLdcuS4IFXWvFgLU gxc1oQS1m4C7eM8ceI/jGR3oDZfhKXCIrpif9Tg+LxtmwRaeo3tbpasPANwiO+Eq BI6LssLFStBblwwaaMzC1E/8fCdBsZYVbQe4LqsJmzb9hOvFCih4At1YFHKQXcHM L+1sCdpKMo/f/AQ3sjS3kEYnFwrIYdskxImHXmYkYe2e1OMkXSQcWjz958A7GPB1 kdm5yMPARR8FZxY9RZBf6QLg3xnIc/OqraeHYCjpFLs+gDGGoEMGwwBW5u3/JJmE SLTq2EYYf6szdVh156zjfMtCFCIM51BXoWwlB3swhWI80WD87lzrKzYYRbW5H6jp 5SIW74a8vR2OxOKyQu00Qb8S0SsTJF5Ord9EImYsm6rXpQnSs894kp18zNjmjUDh FLxNhMMuY8aiwbypYUm4YRFN9BJJth3SKLXIyP1xxBEpN3IIeQSIXeD9ZoA+sc6e OdEREqMwQV9xPq84JQLsxTqjcSCwO1MJECqwNvKj07w0qdaIMgDAgirLCTXSPJPh b8b2p07Dpb5wFKw/FwGSBuvi3DEzSLhK7zbJzky8zNhmWNAx0VS7gR/koFQDGxR0 gNcVU5vPB2ujvBdW76MegqynP2UowsGdD3Sy3KlB/FAZ+LTGMGY= =Yjl8 -----END PGP SIGNATURE----- Merge tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Lower sd card speeds for two boards to make them run more reliable, missing 32k clock definition for Anbric xx3 devices, missing cache-levels for rk3588, fixed rk3326-board display supplies and more dt-schema fixes. * tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: correct panel supplies on some rk3326 boards arm64: dts: rockchip: use just "port" in panel on RockPro64 arm64: dts: rockchip: use just "port" in panel on Pinebook Pro arm64: dts: rockchip: Remove non-existing pwm-delay-us property arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices arm64: dts: rockchip: add rk3588 cache level information arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro arm64: dts: rockchip: Lower sd speed on rk3566-soquartz ARM: dts: rockchip: fix a typo error for rk3288 spdif node arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Chia-Wei Wang
|
7d4f0b0df7 |
ARM: dts: aspeed-g6: Add UDMA node
Add the device tree node for the UART DMA (UDMA) controller. Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Link: https://lore.kernel.org/r/20230320081133.23655-6-chiawei_wang@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au> |
||
Delphine CC Chiu
|
8d250f34cd |
ARM: dts: aspeed: greatlakes: add mctp device
Add mctp node on I2C bus Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> Link: https://lore.kernel.org/r/20230329083235.24123-3-Delphine_CC_Chiu@Wiwynn.com Signed-off-by: Joel Stanley <joel@jms.id.au> |
||
|
Delphine CC Chiu
|
2ecdcd68e3 |
ARM: dts: aspeed: greatlakes: Add gpio names
Add GPIO names for SOC lines. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://lore.kernel.org/r/20230329083235.24123-2-Delphine_CC_Chiu@Wiwynn.com Signed-off-by: Joel Stanley <joel@jms.id.au> |
||
Lakshmi Yadlapati
|
9bdc19fb94 |
ARM: dts: aspeed: p10bmc: Change power supply info
Bonnell system supports new ACBEL FSG032 power supply on I2C addresses 5A and 5B. Update the device tree with new power supply information and device addresses. Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20230412052305.1369521-6-lakshmiy@us.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au> |
||
Cristian Ciocaltea
|
bb9ecbee05 |
ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes
Commit
|
||
|
Cristian Ciocaltea
|
1532d4f4d7 |
ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes
Commit
|
||
|
Cristian Ciocaltea
|
d4880d2b81 |
ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes
Commit
|
||
|
Cristian Ciocaltea
|
a9efe94fbd |
ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes
Commit
|
||
Manivannan Sadhasivam
|
23fbf5339d |
ARM: dts: qcom: sdx55-fn980: Move "status" property to the end of node
To align with rest of the devicetree files, let's move the "status" property to the end of the nodes. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331145915.11653-2-manivannan.sadhasivam@linaro.org |
||
|
Manivannan Sadhasivam
|
a6d1d86263 |
ARM: dts: qcom: sdx55: Move reset and wake gpios to board dts
The reset and wake properties in the PCIe EP node belong to the board dts as they can be customized per board design. So let's move them from SoC dtsi. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331145915.11653-1-manivannan.sadhasivam@linaro.org |
||
|
Andrew Lunn
|
0939de7d89 |
ARM: dts: armada: Add missing phy-mode and fixed links
The DSA framework has got more picky about always having a phy-mode for the CPU port. The Armada Ethernet supports RGMII, SGMII, 1000base-x and 2500Base-X. Set the switch phy-mode based on how the SoC Ethernet ports is been configured. For RGMII mode, have the switch add the delays. Additionally, the cpu label has never actually been used in the binding, so remove it. Lastly, add a fixed-link node indicating the expected speed/duplex of the link to the SoC. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> |
||
|
Andrew Lunn
|
e2e1bcb19b |
ARM: dts: orion5: Add missing phy-mode and fixed links
The DSA framework has got more picky about always having a phy-mode for the CPU port. The Orion5x Ethernet is an RGMII port. Set the switch to impose the RGMII delays. Additionally, the cpu label has never actually been used in the binding, so remove it. Lastly, add a fixed-link node indicating the expected speed/duplex of the link to the SoC. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> |
||
|
Andrew Lunn
|
8aea8659a5 |
ARM: dts: kirkwood: Add missing phy-mode and fixed links
The DSA framework has got more picky about always having a phy-mode for the CPU port. The Kirkwood Ethernet is an RGMII port. Set the switch to impose the RGMII delays. Additionally, the cpu label has never actually been used in the binding, so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> |
||
Alex Elder
|
280ecc1912 |
ARM: dts: qcom: sdx65: move status properties to end of nodes
Move a few device tree "status" properties so that they are the last specified property, in "qcom-sdx65-mtp.dts" and "qcom-sdx65.dtsi". Note that properties must always be specified before sub-nodes. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230327195605.2854123-3-elder@linaro.org |
||
|
Alex Elder
|
14079448cc |
ARM: dts: qcom: sdx65: add IPA information
Add IPA-related nodes and definitions to "sdx65.dtsi". The SMP2P nodes (ipa_smp2p_out and ipa_smp2p_in) are already present. Enable IPA in "sdx65-mtp.dts"; this GSI firmware is loaded by Trust Zone on this platform. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230327195605.2854123-2-elder@linaro.org |
||
|
Arnd Bergmann
|
a425efcb6e |
i.MX fixes for 6.3, 2nd round:
- Fix 'reg' address length for i.MX8MP LCDIF2 device. - A couple of changes from Fabio Estevam to fix DTC warnings caused unnecessary address/size cells. - Re-enable PCI driver support in imx_v6_v7_defconfig. - Fix PMIC clock source property for imx8mm-evk board. - A couple of fixes from Peng Fan to correct off-on delay property for i.MX8 Verdin boards. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQuKr0UHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM65nQgAgp0xA4VOc/4zgazrhIhzYru/E2Q/ Acd4Rthp7aUATWXjQH1bGM0nNdgp+SLHAarpxysVY0DTXlE92h0eYY+mUohAeX7p X/aXY3OlcmXwq8VqZvUsgmgjIugDpp+T86yH7yEWR2/cdqRtX8A7E4NBCEvQa4PC YkyDMc+Vn9JUxry+oKVdbQ9GKG7UEhFmoyuN0kq1wuua8iKBqsq3CSkH74aRHxbF EpHVSLMUGflAHILofqcZoix+UGR7bV5xBypVh6APCLJhlx9vjk5R+rPVzvpvWUJz N8+R8iS9YCSAx8BSYIPM1vqGq3dDB0wjrjpdAhCmc2lwOOIvtkB2516VkA== =XK6g -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmQugGEACgkQmmx57+YA GNm01w/+I7uc4gGa72VFhDA9TPCIw0Yz47qSHE+Up2UHg3GOEuNaxLER6kCFdxHE ZCEHxvl+u6rM99GU2bPeCbcHa8Ig0wksGTbAG2EmsfAjoZfpCyNYGQP02hPIOYhV dPs57iol6KLOExWejdLvLM73viY9gJa+rAlS27aOxAtwgaWtlK2ZbjUCBV8EQ1Db UFAu3R4Rd517ohNmn9e1x9QJcW03KnNO34wVZNV0siNLLYdVg7FAvsTvNX7JMwCi QmWYZFaEKtXbWsZM3QgSjQvqx98/KY3JGIxhhYD9nq00hd6VRLeMETHPvO/6v9mw OtEFXvTLmAUxXGYdP8eZ4vQEe7QaBLD1WTRD/iAGf0EPuV6lws5tNf9RsziCmcdB 8bw7lBJByqIqA2OCVwhFBUq4ZvBChN9ftxpkGsxE+2FBKkYgn0ki6Tyw+iZAhWyV /Nku/cQePyE/4kPe/9Jpt4MlGdsISvL9ZReLY60fe5z433m6vA5p7G2ajENI0RjC EsM/I8b7hGCFmEGKbsS+xHa36FwJpCSIQisZWvS8SGrB6sNnhQOg+MVjyKo/bTz9 1Amq4R4CQQDF76ocHM0pYbUr6cc/hL8oirqzjg74ISivOHxixULMElivpOycCb9x pf1AUzlgmXexN92WX0CdhG7AHhBTRPP/UcvUlTabKbimXzB112o= =or6G -----END PGP SIGNATURE----- Merge tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.3, 2nd round: - Fix 'reg' address length for i.MX8MP LCDIF2 device. - A couple of changes from Fabio Estevam to fix DTC warnings caused unnecessary address/size cells. - Re-enable PCI driver support in imx_v6_v7_defconfig. - Fix PMIC clock source property for imx8mm-evk board. - A couple of fixes from Peng Fan to correct off-on delay property for i.MX8 Verdin boards. * tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells arm64: dts: imx8mp-verdin: correct off-on-delay arm64: dts: imx8mm-verdin: correct off-on-delay arm64: dts: imx8mm-evk: correct pmic clock source arm64: dts: imx8mp: fix address length for LCDIF2 Link: https://lore.kernel.org/r/20230406021602.GP11367@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Stefan Wahren
|
5e4f393ccb |
ARM: dts: imx6ull: Add chargebyte Tarragon support
This adds the support for chargebyte Tarragon, which is an Electrical Vehicle Supply Equipment (EVSE) for AC charging stations (according to IEC 61851, ISO 15118). The Tarragon board is based on an i.MX6ULL SoC and is available in 4 variants (Master, Slave, SlaveXT, Micro), which provide more or less peripherals. Supported features: * 512 MB DDR RAM * eMMC * Debug UART * 100 Mbit Ethernet * USB 2.0 Host interface * Powerline communication (QCA700x) * 2x RS485 * Digital in- and outputs (12 V) * One-Wire master for external temp sensors * 2x relay outputs * 2x motor interfaces Link: https://chargebyte.com/products/charging-station-communication/charge-control-c Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Jakub Kicinski
|
2acbeb5db2 |
linux-can-next-for-6.4-20230404-2
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmQsOSQTHG1rbEBwZW5n dXRyb25peC5kZQAKCRC+UBxKKooE6N+QB/4w/slgDq0yAYs0GTsRA3Z3IGp8OAlp PI6g1y9npiR7ffFdnC7ldYRSzTg2sStEKhe0xv80zOPl8IpI82Bz5a7oSb2Oi9tH Fuf2JF2KYt08VfhGQKmhhcWHSh/vyCrAt14s8P2sCGQPEFBm2N8qrB9hhZera3Xb gwNG+1nFjuFlUdRxMVQXLmyBdccl/+OLdtU/tI3Y4xm57Fxnghq7DyvmdGumJsbN 6zlyi+FTF3PGgOWglS/2rZeOO4PPWgfsZEeM6jhAt1E2ijtMJSQUl3w1Fpo6dcnq 49wSMFySI8jwpewLgZctZNheb73wvuvAqXnmPm8Krd0hi/apL79Tb1OE =lDzw -----END PGP SIGNATURE----- Merge tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2023-04-04-2 The first patch is by Oliver Hartkopp and makes the maximum pdu size of the CAN ISOTP protocol configurable. The following 5 patches are by Dario Binacchi and add support for the bxCAN controller by ST. Geert Uytterhoeven's patch for the rcar_canfd driver fixes a sparse warning. Peng Fan's patch adds an optional power-domains property to the flexcan device tree binding. Frank Jungclaus adds support for CAN_CTRLMODE_BERR_REPORTING to the esd_usb driver. The last patch is by Oliver Hartkopp and converts the USB IDs of the kvaser_usb driver to hexadecimal values. * tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: kvaser_usb: convert USB IDs to hexadecimal values can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING dt-bindings: can: fsl,flexcan: add optional power-domains property can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init can: bxcan: add support for ST bxCAN controller ARM: dts: stm32: add pin map for CAN controller on stm32f4 ARM: dts: stm32: add CAN support on stm32f429 dt-bindings: net: can: add STM32 bxcan DT bindings dt-bindings: arm: stm32: add compatible for syscon gcan node can: isotp: add module parameter for maximum pdu size ==================== Link: https://lore.kernel.org/r/20230404145908.1714400-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Fabio Estevam
|
3847e716b6 |
ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
Building with W=1 leads to the following dtc warning:
arch/arm/boot/dts/imx6ull-colibri.dtsi:36.9-46.5: Warning (graph_child_address): /connector/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
Since a single port is used, 'ports' can be removed, as well as the
unnecessary #address-cells/#size-cells.
Fixes:
|
||
|
Fabio Estevam
|
82655f9070 |
ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
Building with W=1 leads to the following dtc warning:
arch/arm/boot/dts/imx7d-remarkable2.dts:319.19-335.4: Warning (avoid_unnecessary_addr_size): /soc/bus@30800000/i2c@30a50000/pmic@62: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Remove unnecessary #address-cells/#size-cells to fix it.
Fixes:
|
||
|
Arnd Bergmann
|
9514e51932 |
Amlogic ARM DT changes for v6.4:
- adjust order of some compatibles - meson8: add the xtal_32k_out pin - meson8: add the SDXC_A pins - mxiii-plus: Enable Bluetooth and WiFi support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmQr6dIACgkQd9zb2sjI SdGIxQ//ZpbqL6CT8CFWxRiat+vP7t5XqJKug/tMPVAurGSVqelNrPqnUUZbkOWo ycTNIhEIbZFh89pH0C/NtTV84Pu14z6Z/lie6/RXudoy5jaH9mgNM+VZKIJlKxFb EhAabAlWOYooSbP3Am5WyH5QvFU9tybogIDTRLU+mgctuEDEgGC1kQdpxLKmjLjv pD7TvT85OSZNH6oustn0vZ17EIvFePF3ZJ649o05sdq0X6xQBSk+R5zFgk0X1hNY VJJEgvL8IBa7Qjd8Pnv1yZoc0P8G09oMwqdiLMq/XjEA/r7bNEUwQqeQfGq31i8T ZWHtzzoenLMrJ5V6UKG3qrI8ksXjx8wr6U0n4AnBH9URSqRBs4S9bbOgR3UCt5fN L9IlAOd+yy8B5TO/aAsPUYdpAr7cRIl/K+KaLanhyf+4NLgti2mTJjYk2bFf/DmS Z1+CTOd8Qkzckt7c7T4JxRWF+tLSUPi/krXBbzupK5wPBd9AxYGWiD2TBErb1WCA G3+AxuKT8RjE4BZtrMsAaWCNLtgY2C5yixIvh3wYL6ZVKGi7odv6kAbL/yaT2MbY G/t6iiug7rJfW25xyYp6SKkREUtR4au+kzHnt/KLUDUBwpBZ38pKFRShA4r3/cvH S5sGKv05OxbC//9pLhMsvrPUG/1V3RFgCGtGTlxqjPCfjvlXto0= =gZEJ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmQsM9sACgkQmmx57+YA GNkzjQ/7BfkCJ6t+XPnF792Zc3o+nNopuvIIMUfc11H+yA8mkkHdNDgpIlwVQYgB 4VooSfVwQJg9HrgekRgybCf/5lasN7EFk1NBrlZQU6U3ahH2oPBKJPPsoaMtoTyU ScMf+3+YXgv2nx6ZJ8dbSi2la1ElKhXv6QbSl08HvueUNkAW4ybdnwbJU4PkwplT WGSLAPtAt6NUcmeAOASXBd8lNdqhRyjfswgB+uPNqeBewYvkyxbl5NPBiCTCf6yx 4u3QLkSgiASRxjsTwBkK+cklxl6Z/A2vCOQV7oi0mclAjygypdlD3qimyHmZEBLm 7/dRtakvQMiPdztgDVnsQjGsqRinJiswbZCmSkSkM39kuzdO3/MzbwOKVKlNP4IC eFyWV+7a7Ykshll4ij3QjUavjHqf358hfIng7FbmUc368hTCDxY5rZ6n8CMP+MjF 3vF/jaDwnjO3j7McxRHwqPHem6ezp2HqTL4abBWyHjiK83mz+EBiYKw96ktk9V+s W44WiL2YnQEWVfYFXf2dmK7mpYeqfdZtjuRcQqEjCZVsu4Sm+ZzwYYlvymgPTtI3 /MNoVvAhgcD5tt6k9grqsA5Dg6OrX5OngcVyI2+KQHZtCPdtFyYMJTAyYpVfX2zn dUqpt2gNqlJUchFuUcpxhbxNfoaHnWK5SycxrCdSy0k7/5GL1m4= =juyK -----END PGP SIGNATURE----- Merge tag 'amlogic-arm-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM DT changes for v6.4: - adjust order of some compatibles - meson8: add the xtal_32k_out pin - meson8: add the SDXC_A pins - mxiii-plus: Enable Bluetooth and WiFi support * tag 'amlogic-arm-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: meson8m2: mxiii-plus: Enable Bluetooth and WiFi support ARM: dts: meson8: add the SDXC_A pins ARM: dts: meson8: add the xtal_32k_out pin arm: dts: meson: adjust order of some compatibles Link: https://lore.kernel.org/r/eb1f32f8-822d-9cfc-fca6-9e044bf4a5ab@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Neil Armstrong
|
a9414bef86 |
ARM: dts: oxnas: remove obsolete device tree files
Due to lack of maintainance and stall of development for a few years now, and since no new features will ever be added upstream, remove support for OX810 and OX820 devices. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
63d2b92754 |
AT91 device tree updates for 6.4:
It contains: - Update to maximum frequency for QSPI on several boards thanks to the additon of the new spi-cs-setup-ns property. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCZCbtLgAKCRAfOrpwrNPN DNF0AP9sgFJRmSrb/gLtaUOWUXfs7ma9ioc/wwvW7WuB3EehbgD/YHwSwDN0GlLP upwfngYVPPIyl7nR97dqdYFZ06NT0AA= =/0gd -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmQsMy8ACgkQmmx57+YA GNmnIA//YlR3iLu8mtIJrBdolszxtG22pvI6oLL7Jh2GgwCogIDI6Dw7XJ69pE30 t30qfp7bNN4PJr9XhG9dEDQ69L2AScNTSh99DNFXR4OEZWasL7TsG2E44vHKUkja LuiITivNnCzWwiLeN1CefY2hmZfRZ/w1yGzFvwRqmD/SQCMlXLW5UTJube8R0LEt X+NfC9OQXk4OSPBLz3fTRkDqlJh9ChEbLjOhvblaCGQ27HJ+O68d40P5cbkpwV10 NXyRzYJXa8Q/qyNpSYKLhNYKI0xR88QxqtnutqjeS7038D/uKj8HEIq6n/W69JjZ gMVHw74BKnCGvLfHYNu4ezyMoI3NUM5JtwmRepRKLpOGTApEXBMEnIGRrbNIMjOT n+atwXHPkryQnWEL92SSOLQ2B9tKPkGilOTldqYhTPlS068WIvbBcus0WdtwZ+Tk P7VY1qg7sOYYWzM3iMQNNDQFFy7ZOV39O+b9d/yZUF1lOb4eNrE4J37FZK9DNSpz qIriatnxXLvEtU2zi3cXcRvs9nd21TMwhnGrqevQyLulXoTHnYphuSuaCk7LtLV9 9CiE8/qGOshpxJvPcp4nVhY8vI1zKyKpnoLrx3aa43WSS3gPEPeoLZjzQNx1krL6 ZiTwLSJ4UDJQzIW8/fxYnn/IU1FUB3b4ohhl+zy1ZQ7G6GP6AAw= =ybJo -----END PGP SIGNATURE----- Merge tag 'at91-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt AT91 device tree updates for 6.4: It contains: - Update to maximum frequency for QSPI on several boards thanks to the additon of the new spi-cs-setup-ns property. * tag 'at91-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60ek: Set sst26vf064b SPI NOR flash at its maximum frequency ARM: dts: at91: sama5d2_icp: Set sst26vf064b SPI NOR flash at its maximum frequency ARM: dts: at91-sama5d27_som1: Set sst26vf064b SPI NOR flash at its maximum frequency ARM: dts: at91-sama5d27_wlsom1: Set sst26vf064b SPI NOR flash at its maximum frequency Link: https://lore.kernel.org/r/20230331142751.41522-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
8f9abca2f4 |
Devicetree overlays for omaps for v6.4
Devicetree overlays for omaps to enable the optional LCD and touchscreen modules on am57xx-evm and am57xx-idk boards. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmQlg3MRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXNHZBAAmfNiUYHKXU9GuszTuUByHV90b8gFQM8G tJTogSyYIddfdgQ3jEr6Vu5RuZCNzvtSVlv3kTeDHPMkdXWKIdZ6jq27w6drIdh3 fc5WNUyXMVDhEmIRrWWfEnvBpLy1BiEUX43ZVTSYXDuWh3LfY7noUgyiqeOPv6tP hxn1wxo9WGxAVxHbvt5jN0pqRL2GoMxmDYBCwsMVdR0SnjSF49ECo+ulQifeZTfl Dff605USQCTCPozlpHEizk4aB43xST0GvgwU61tbtM73m8LUp5IuYwqZhsyYczU3 hv4th2ECopitvPJwFs/F6UrpMZGq4Bi3Nk+U3/EEdq7ThAO6FSHztHRMkYf6KgjF jvpCsMzgr854hR7T4UmDAIPegtTIxK2IeIrYWXn8B3CM1FSRMTkttiyFXSp7xyib d5emgBVSv4VbOi/CcvbMLDEGWyi5OMjYE/5s8ZcGHuF2CTJECe6OAV6jM5SgdIBw 77zcIVYfVEe5Y00T3MUHot8iqi5WVU0RrCClrigCMQDT/W17yH6cf7O+flelDsyw AIYRSIdbGnpc8kWeB2qU1V+xVhgzzehoE2FQHnVTj3ile7OBfvIKtxH/vPuGw+YR vJ49SI+2HxBqsQTPdyaTEZEIhueVr/1CqjxCusmhzn7zhUcdxr0YkYCkecvldo8U 8qMwIZ6XLP0= =5DmE -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmQsMjAACgkQmmx57+YA GNkdxA//a7WSJGn0G0oZLNCPYuC0nAQtnmfkwRAmRP3iviE51+2O8y2VtY7UFNbo GDzjDYKbQMrsIeAZbO+hKULdwffvC1d1Axieht5m23j6RMYbB2utTHkzkArWobyn m9gbyJqud+2IKpwxE0i4KF84ANcO6bfdDDG8msZDay0BchsI7vDY4s7fCo3mz6gW ygfxvTtxif7EH0CCwNGj3+1Rgn1onZcNuMf2k1IpEWsIhN1J4pw5AwZF9enDBhB+ 4Yg9xNvOYW4zcoWVo03DlNsGeCKcHAARq89d09LLd0cso13jp5e6YkDBuZi0nEG9 ff/djKvs5sY1sm735s6cBpS5qO7+8TUHlBxwjCyys7kTB/gHYR0nZ/B9m+81Xzrk omtwmLC6Tlm+TnDGWfRQwC0Ep+OZ6B4OVCpbUJI+HgKnyXjDoV98dDZhyJSlgVcj vlkog7ANT72RWNuBRbbaU3Rxv0pWTpMNMt9yP9RJfwzHksSRXC8X4UYI0dglNeO/ y2f+IJIZSeTd07TDokEpvn7YXxUg1TDey7xWCm6yw4Qy0R2TmaQS0dZxnWRqrygX ueL1WHGGS1JfIuI0N/hqzPjDhJu9CveDe4zw+YiP4TS4y1N58VgN0yZ5xdE2OnU9 BCPzKT63FMEL3a/MzDJhISXVKaMADayb9f/7bv3uBldrQestK6c= =uH4T -----END PGP SIGNATURE----- Merge tag 'omap-for-v6.4/dt-overlays-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt Devicetree overlays for omaps for v6.4 Devicetree overlays for omaps to enable the optional LCD and touchscreen modules on am57xx-evm and am57xx-idk boards. * tag 'omap-for-v6.4/dt-overlays-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am57xx-idk: Add IDK displays and touchscreens ARM: dts: ti: Add AM57xx GP EVM Rev A3 board support ARM: dts: ti: Add AM57xx GP EVM board support Link: https://lore.kernel.org/r/pull-1680180448-508978@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
c2f714150b |
Devicetree changes for omaps for v6.4
Devicetree changes for omaps for gta04, Phytec am335x devices, and to drop a obsolete compatible property: - A non-urgent fix for gta04 to enable more dma channels for some audio configurations - Update the dts compatible and vendor prefixes for gta04 - A series of updates for Phytec am335x based boards to configure more devices like rtc and audio, and a few clean-up patches - A change to drop the usage of "ti,omap36xx" compatible, the driver code already checks for "ti,omap3630" that is also alread set in the dts files. This makes the yaml binding conversion a bit simpler. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmQlfyQRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXOrTQ//XymLo20hGo51edplbkVZf8ORcJIZKh/p MHGHBNRprg1LXkix1bMv/eeW2VbY8Cibuv03alMzNY1PMhlQhaQ3HdkPDLkXFYEB 2N75ysNNnx6AuVZwTraBICLXgSRixjUcPcxWIV/x59F98n3vkxVi14JgoWxcN8a4 apHptRHuMKrUWGk8r1RIa9NbwM8sMU6pM1kRl9nED8lROs6gK0D9UNkZh1ZGvSfC Ml8N4WMAE7BGf8zHVgaoclB9SDqDPJ0hxvO9/wgoXShLhdIS2ay8WPvSVCaTxLO9 BA1LZ8x2Xxr3XD+9HTNTUCHiBiVwuQtF0luzzN0iWQZA9NMPeCNIDCtRatOTe+Mj Z/xUbKeMKOdjfigPmCVcxHb/eC87gJxUz2mrwIokvmFuvOJM2gWNySyUeDILm6hq wY5aI23XrPv0mv15/XfaMc/p5/REBgdcWw/3A1siUuZIEsObL5k7Y8+GcMMPddEw 6s4t6gICEe273dnES4wmYGBbRd7NP9qoDhk680ulzTfSBznRyDQjB5hkCQcZpyPq FaSpDMuhobGjRD9sgmbNmcUlPvZkO29BXhzxi+fuE2zi/0HcXglVU6RQg1Lx93IC JNB3gXC2pfzcBcWEHl2h4p9JOdbB80Sh+yi0E8g52IntlfzuUUqBc64VA8GlF1Go cg/ch14DeaA= =iNMn -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmQsMfIACgkQmmx57+YA GNls+A//Q7sSZY9qjxPWc7HRfaoul6Iy5DBOOkC8IkkZziid5/WcERGp64asSIOA U3igJv+1hk4TpiMuX7lSfB+EWZCefo+RFkw/mUOSKhFEnfk0mDEcPTV5cRAhxLxR ybs3E77k4R8wGJLAi3d586FY3kDy8p0pdIF3LjqLtJjbnMFi3mu5pf/t6KbzqRDz ZJoxwpFcnTbfLV6XOjlAyQUDKadT1ki4UMd0tVqQHP+l1LrlPwSsl+5HirdytZyE xiAa56B9l7NwgV5YA4hfKCR6NuFUTRu0MFMep0Hgv6lMAhJVL8JGz3qt9eLvbwQC GOWj/4rZAVmb69jVJXjrPCD/1IFFfMSFd5DWRqlYMuAWm3OKdmLyMM4W3spQyPOo /Ab6NY7MmM6XZf9Dl6A0NMyr3AWvvs7KDN6Z24JozKuXp8W8v6vsrF3VhUoEumEa tOhd4PldLSFJ65JOL0JQSYXhMb/m3TqdDEfae75w77+X5+9G3BLDfb5iikhOmiWT iBdKziKCAssjmli6KdaPlaf2emyiyHONFxAbZ+cT1UEJTQvP1WYwvqvolimvnEum 14LEZM8tcX+HQLqE7/kLWhHjYFhY9GvrX/UQ7RRN2yS7+APAMBhY5XaC93bjeJsg XODwubgs1i+mhZ0FG8UGX+XLW+t3AVn2p3wE5z0XDOsOrKvcx1M= =yJ9h -----END PGP SIGNATURE----- Merge tag 'omap-for-v6.4/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt Devicetree changes for omaps for v6.4 Devicetree changes for omaps for gta04, Phytec am335x devices, and to drop a obsolete compatible property: - A non-urgent fix for gta04 to enable more dma channels for some audio configurations - Update the dts compatible and vendor prefixes for gta04 - A series of updates for Phytec am335x based boards to configure more devices like rtc and audio, and a few clean-up patches - A change to drop the usage of "ti,omap36xx" compatible, the driver code already checks for "ti,omap3630" that is also alread set in the dts files. This makes the yaml binding conversion a bit simpler. * tag 'omap-for-v6.4/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap: Drop ti,omap36xx compatible ARM: dts: am335x-phycore-som: Remove superseded/invalid GPMC NAND type. ARM: dts: am335x-pcm-953: Remove superseded/invalid LED trigger. ARM: dts: am335x-phycore-som: Remove underscore in node names. ARM: dts: am335x-regor: Remove underscore in node names. ARM: dts: am335x-pcm-935: Remove underscore in node names. ARM: dts: am335x-wega: Change node name of sound card, remove underscores. ARM: dts: am335x-wega: Fix audio codec by using simple-audio-card driver. ARM: dts: am335x-phycore-som: Add alias for TPS65910 RTC ARM: dts: omap3-gta04: fix compatible record for GTA04 board ARM: dts: gta04: fix excess dma channel usage Link: https://lore.kernel.org/r/pull-1680180389-756753@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
d707810efa |
Renesas DTS updates for v6.4
- Add USB3 support for the RZ/V2M SoC and the RZ/V2M Evaluation Kit 2.0,
- Add uSD card and eMMC support for the RZ/V2M Evaluation Kit 2.0,
- Add CAN-FD, thermal, GMSL2 video capture, and sound support for the
R-Car V4H SoC and the White-Hawk development board,
- Add PMU support for the RZ/G2UL, RZ/G2L{,C}, and RZ/V2L SoCs,
- Drop support for the obsolete R-Car H3 ES1.* (R8A77950) SoC,
- Add I2C EEPROM support for the Atmark Techno Armadillo-800-EVA, and
the Renesas Condor and ULCB development boards,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZCFQ5wAKCRCKwlD9ZEnx
cGqBAQDWxWvL3fy+srYshTn4KoTmoJ1T00SQDNvRoN0r97N8bAD+Mw3hhApGtn9O
SpnBwOSvQeYzMLrG9NczM5JJu1eW8Qs=
=eROn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HxdL
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.4
- Add USB3 support for the RZ/V2M SoC and the RZ/V2M Evaluation Kit 2.0,
- Add uSD card and eMMC support for the RZ/V2M Evaluation Kit 2.0,
- Add CAN-FD, thermal, GMSL2 video capture, and sound support for the
R-Car V4H SoC and the White-Hawk development board,
- Add PMU support for the RZ/G2UL, RZ/G2L{,C}, and RZ/V2L SoCs,
- Drop support for the obsolete R-Car H3 ES1.* (R8A77950) SoC,
- Add I2C EEPROM support for the Atmark Techno Armadillo-800-EVA, and
the Renesas Condor and ULCB development boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (30 commits)
arm64: dts: renesas: r8a779a0: Update CAN-FD to R-Car Gen4 compatible value
arm64: dts: renesas: ulcb: Add I2C EEPROM for PMIC
arm64: dts: renesas: condor: Add I2C EEPROM for PMIC
ARM: dts: armadillo800eva: Add I2C EEPROM for MAC address
arm64: dts: renesas: Remove R-Car H3 ES1.* devicetrees
arm64: dts: renesas: white-hawk: Add R-Car Sound support
arm64: dts: renesas: r8a779g0: R-Car Sound support
arm64: dts: renesas: r9a07g043: Update IRQ numbers for SSI channels
arm64: dts: renesas: r9a07g054: Update IRQ numbers for SSI channels
arm64: dts: renesas: r9a07g044: Update IRQ numbers for SSI channels
arm64: dts: renesas: r8a774c0: Remove bogus voltages from OPP table
arm64: dts: renesas: r8a77990: Remove bogus voltages from OPP table
arm64: dts: renesas: r9a07g054: Add Cortex-A55 PMU node
arm64: dts: renesas: white-hawk-csi-dsi: Add and connect MAX96712
arm64: dts: renesas: r8a779g0: Add and connect all CSI-2, ISP and VIN nodes
arm64: dts: renesas: r8a779f0: Use proper labels for thermal zones
arm64: dts: renesas: r8a779g0: Add thermal nodes
arm64: dts: renesas: rzv2mevk2: Add uart0 pins
arm64: dts: renesas: Drop specifying the GIC_CPU_MASK_SIMPLE() for GICv3 systems
arm64: dts: renesas: r9a07g044: Add Cortex-A55 PMU node
...
Link: https://lore.kernel.org/r/cover.1679907064.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
Maxim Schwalm
|
13a53ebc22 |
ARM: tegra30: Use cpu* labels
Replace cpu paths with labels since those already exist in tree. Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |