v1: Each partition has its own gfxhub or mmhub. adjust
the num of MAX_VMHUBS and the GFXHUB/MMHUB layout (Le)
v2: re-design the AMDGPU_GFXHUB/AMDGPU_MMHUB layout (Le)
v3: apply the gfxhub/mmhub layout to new IPs (Hawking)
v4: fix up gmc11 (Alex)
v5: rebase (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks better to place this field in ring
structure. Also drop the repeated ring funcs definitions
if there's no difference except for vmhub field.
v2: rename the field to vm_hub like others (Le)
v3: apply the changes to new ip blocks (Hawking)
v4: fix vcn sw ring (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplifies the code so that all VCN versions will get the firmware
name from `amdgpu_ucode_ip_version_decode` and then use this filename
to load microcode as part of the early_init process.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move out asic specific definition from common header.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use ring structure to access the cpu/gpu address of rptr/wptr.
v2: merge gfx10/sdma5/sdma5.2 patches
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
On Renoir, vcn ring test failed on the second time insmod in the reload
test. After investigation, it proves that vcn only can disable dpg under
dpg unpause mode (dpg unpause mode is default for dec only, dpg pause
mode is for dec/enc).
[how]
unpause dpg in dpg stopping procedure.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only GFX ring, SDMA ring and VCN decode ring support secure submission
at the moment.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vcn fwlog is for debugging purpose only,
by default, it is disabled.
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add fw log in fw shared data structure.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to use the tmp variable, just use the constant
directly.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roughly the same code was present in all VCN versions.
Consolidate it into a single function.
v2: use AMDGPU_UCODE_ID_VCN + i, check if num_inst >= 2
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
adev_to_drm is used everywhere, so improve recent changes
when accessing drm_device pointer from amdgpu_device.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN has multiple rings. Set the proper priority level for each
encode ring while initializing.
Signed-off-by: Satyajit Sahu <satyajit.sahu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The printing message "PSP loading VCN firmware" is mis-leading because
people might think driver is loading VCN firmware. Actually when this
message is printed, driver is just preparing some VCN ucode, not loading
VCN firmware yet. The actual VCN firmware loading will be in the PSP block
hw_init. Fix the printing message
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add cancel_delayed_work_sync before set power gating state
to avoid race condition issue when power gating.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow separate ring to share the same scheduler score.
No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:483: warning: Excess function parameter 'sw' description in 'vcn_v2_0_disable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:644: warning: Excess function parameter 'sw' description in 'vcn_v2_0_enable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1404: warning: Function parameter or member 'count' not described in 'vcn_v2_0_dec_ring_insert_nop'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1426: warning: Function parameter or member 'addr' not described in 'vcn_v2_0_dec_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1426: warning: Function parameter or member 'seq' not described in 'vcn_v2_0_dec_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1426: warning: Function parameter or member 'flags' not described in 'vcn_v2_0_dec_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1426: warning: Excess function parameter 'fence' description in 'vcn_v2_0_dec_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1465: warning: Function parameter or member 'job' not described in 'vcn_v2_0_dec_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1465: warning: Function parameter or member 'flags' not described in 'vcn_v2_0_dec_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1609: warning: Function parameter or member 'addr' not described in 'vcn_v2_0_enc_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1609: warning: Function parameter or member 'seq' not described in 'vcn_v2_0_enc_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1609: warning: Function parameter or member 'flags' not described in 'vcn_v2_0_enc_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1609: warning: Excess function parameter 'fence' description in 'vcn_v2_0_enc_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1636: warning: Function parameter or member 'job' not described in 'vcn_v2_0_enc_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1636: warning: Function parameter or member 'flags' not described in 'vcn_v2_0_enc_ring_emit_ib'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When declaring pointer data, the "*" symbol should be used adjacent to
the data name as per the coding style standards. This resolves following
issues reported by checkpatch script:
ERROR: "foo * bar" should be "foo *bar"
ERROR: "foo * bar" should be "foo *bar"
ERROR: "foo* bar" should be "foo *bar"
ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
General code indentation and alignment changes such as replace spaces
by tabs or align function arguments as per the coding style
guidelines. Issue reported by checkpatch script.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change the comment typo: "programm" -> "program".
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in VCN2/JEPG2. They are for the same ASIC.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SOC15_WAIT_ON_RREG's return value needn't always been handled by
caller. new design is to fix this kind of unused variable.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file vcn_v2_0.h
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename SOC15_DPG_MODE_OFFSET_2_0, RREG32_SOC15_DPG_MODE_2_0 and
WREG32_SOC15_DPG_MODE_2_0 for VCN2.0, VCN2.5 and VCN3.0.
These three macros are used VCN2.0, VCN2.5 and VCN3.0, therefore rename
it to be a general name.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1848:39: warning: variable ‘direct_poll’ set but not used [-Wunused-but-set-variable]
It is introduced by commit dd26858a9c ("drm/amdgpu:
implement initialization part on VCN2.0 for SRIOV"), but never used,
so remove it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Generate HW IP's sched_list in amdgpu_ring_init() instead of
amdgpu_ctx.c. This makes amdgpu_ctx_init_compute_sched(),
ring.has_high_prio and amdgpu_ctx_init_sched() unnecessary.
This patch also stores sched_list for all HW IPs in one big
array in struct amdgpu_device which makes amdgpu_ctx_init_entity()
much more leaner.
v2:
fix a coding style issue
do not use drm hw_ip const to populate amdgpu_ring_type enum
v3:
remove ctx reference and move sched array and num_sched to a struct
use num_scheds to detect uninitialized scheduler list
v4:
use array_index_nospec for user space controlled variables
fix possible checkpatch.pl warnings
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add firmware write/read point reset sync through shared memory
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn dpg harware synchronization to fix race condition
issue between vcn driver and hardware.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we stop the HW for example for GPU reset we should not stop the
front-end scheduler. Otherwise we run into intermediate failures during
command submission.
The scheduler should only be stopped in very few cases:
1. We can't get the hardware working in ring or IB test after a GPU reset.
2. The KIQ scheduler is not used in the front-end and should be disabled during GPU reset.
3. In amdgpu_ring_fini() when the driver unloads.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Test-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As no need to support vcn decode feature, so disable the
ring for SR-IOV.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo for vcn2/jpeg2 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
and disable MC resum in VCN2.0 as well
those are not concerned by VF driver
Singed-off-by: darlington Opara <darlington.opara@amd.com>
Signed-off-by: Jinage Zhao <jiange.zhao@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support IB test on dec/enc ring
disable ring test on dec/enc ring (MMSCH limitation)
v2: squash in unused variable warning fix
Singed-off-by: darlington Opara <darlington.opara@amd.com>
Signed-off-by: Jinage Zhao <jiange.zhao@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
something need to do for VCN2.0 enablement on SRIOV:
1)use one dec ring and one enc ring
2)allocate MM table for MMSCH usage
3)implement SRIOV version vcn_start which orgnize vcn programing
with patcket format and implement start mmsch for to run those
packet
4)doorbell is changed for SRIOV
Singed-off-by: darlington Opara <darlington.opara@amd.com>
Signed-off-by: Jinage Zhao <jiange.zhao@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support pause_state for multiple instance, and it will fix vcn2.5 DPG mode
power off issue on instance 1.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Share vcn_v2_0_dec_ring_test_ring to vcn2.5 to support
vcn software ring.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Better clean that up before some automation starts to complain about it
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move macro from vcn2.0 to amdgpu_vcn to share with vcn2.5
v2: squash in macro fix
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add multiple instance direct SRAM read and write support for vcn2.5
v2: squash in indexing fix
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add multiple-instance dpg pause mode support for VCN2.5
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The JPEG irq type has been moved to its own structure
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And clean up the duplicated stuff
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are no longer needed, using from JPEG2.0 instead.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of amdgpu_ring_test_ring, so the helper function determines
whether the ring is ready
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no functional change, just switch to new structures
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN 2.0 firmware now requires a packet start command to be sent before
any other decode ring buffer command.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sets the CMD_SOURCE bit for VCN 2.0 Decoder Ring Buffer commands. This
bit was previously set by the RBC HW on older firmware. Newer firmware
uses a SW RBC and this bit has to be set by the driver.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
