This provides these 3 functions in the VCAP API:
- Count the number of rules in a VCAP lookup (chain)
- Remove a key from a VCAP rule
- Find the keyset that gives the smallest rule list from a list of keysets
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This improves the check performed on linked rules when enabling or
disabling them. The chain id used must be the chain id without the offset
used for linking the rules.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The rule counter must be cleared when creating a new rule, even if the VCAP
lookup is currently disabled.
This ensures that rules located in VCAPs that use external counters (such
as Sparx5 IS2 and ES0) will have their counter reset even if the VCAP
lookup is not enabled at the moment.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Fixes: 95fa74148d ("net: microchip: sparx5: Reset VCAP counter for new rules")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for tc actions gate and police, in order to implement
support for configuring PSFP through tc.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows the check of the goto action to be specific to the ingress and
egress VCAP instances.
The debugfs support is also updated to show this information.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When there is only one keyset available for a certain VCAP rule size, the
particular keyset does not need a type id when encoded in the VCAP
Hardware.
This provides support for getting a keyset from a rule, when this is the
case: only one keyset fits this rule size.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With more than one possible actionset in a VCAP instance, the VCAP API will
now use the actions in a VCAP rule to select the actionset that fits these
actions the best possible way.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This allows rules to be chained between VCAP instances, e.g. from IS0
Lookup 0 to IS0 Lookup 1, or from one of the IS0 Lookups to one of the IS2
Lookups.
Chaining from an IS2 Lookup to another IS2 Lookup is not supported in the
hardware.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds the actionset type id to the rule information. This is needed as
we now have more than one actionset in a VCAP instance (IS0).
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The "eport" variable needs to be initialized to NULL for this code to
work.
Fixes: 814e769320 ("net: microchip: vcap api: Add a storage state to a VCAP rule")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/Y8qbYAb+YSXo1DgR@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use kmemdup() helper instead of open-coding to simplify
the code when allocating newckf and newcaf.
Generated by: scripts/coccinelle/api/memdup.cocci
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20230119092210.3607634-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This improves the VCAP cache and the VCAP rule list protection against
access from different sources.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This ensures that the admin lock is taken before the debugFS functions
starts iterating the VCAP rules.
It also adds a separate function to decode a rule, which expects the lock
to have been taken before it is called.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new function that just checks if the VCAP rule id is already used by
an existing rule.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for TC clients to get the packet count for a TC filter
identified by its cookie.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This supports that individual rules are enabled and disabled via chain
information.
This is done by keeping disabled rules in the VCAP list (cached) until they
are enabled, and only at this time are the rules written to the VCAP HW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows a VCAP rule to be in one of 3 states:
- permanently stored in the VCAP HW (for rules that must always be present)
- enabled (stored in HW) when the corresponding lookup has been enabled
- disabled (stored in SW) when the lookup is disabled
This way important VCAP rules can be added even before the user enables the
VCAP lookups using a TC matchall filter.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This changes the way the chain information verified when adding a new tc
flower filter.
When adding a flower filter it is now checked that the filter contains a
goto action to one of the IS2 VCAP lookups, except for the last lookup
which may omit this goto action.
It is also checked if you attempt to add multiple matchall filters to
enable the same VCAP lookup. This will be rejected.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds both the source and destination chain id to the information kept
for enabled port lookups.
This allows enabling and disabling a chain of lookups by walking the chain
information for a port.
This changes the way that VCAP lookups are enabled from userspace: instead
of one matchall rule that enables all the 4 Sparx5 IS2 lookups, you need a
matchall rule per lookup.
In practice that is done by adding one matchall rule in chain 0 to goto IS2
Lookup 0, and then for each lookup you add a rule per lookup (low priority)
that does a goto to the next lookup chain.
Examples:
If you want IS2 Lookup 0 to be enabled you add the same matchall filter as
before:
tc filter add dev eth12 ingress chain 0 prio 1000 handle 1000 matchall \
skip_sw action goto chain 8000000
If you also want to enable lookup 1 to 3 in IS2 and chain them you need
to add the following matchall filters:
tc filter add dev eth12 ingress chain 8000000 prio 1000 handle 1000 \
matchall skip_sw action goto chain 8100000
tc filter add dev eth12 ingress chain 8100000 prio 1000 handle 1000 \
matchall skip_sw action goto chain 8200000
tc filter add dev eth12 ingress chain 8200000 prio 1000 handle 1000 \
matchall skip_sw action goto chain 8300000
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The conversion to the platform specific multi-word format is moved from the
key/action add functions to the encoding key/action.
This allows rules that are disabled (not in VCAP HW) to use the same format
for keys/actions as rules that have just been read from VCAP HW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This changes the VCAP lookups state to always be enabled so that it is
possible to add "internal" VCAP rules that must be available even though
the user has not yet enabled the VCAP chains via a TC matchall filter.
The API callback to enable and disable VCAP lookups is therefore removed.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a rule counter is external to the VCAP such as the Sparx5 IS2 counters
are, then this counter must be reset when a new rule is created.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For consistency the VCAP cache area is erased just before the new rule is
being encoded.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Semicolons after "}" are not needed.
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/202212051422158113766@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the function vcap_rule_get_key_u32 which allows to get the value and
the mask of a key that exist on the rule. If the key doesn't exist,
it would return error.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the function vcap_mod_rule which allows to update an existing rule
in the vcap. It is required for the rule to exist in the vcap to be able
to modify it.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add function vcap_get_rule which returns a rule based on the internal
rule id.
The entire functionality of reading and decoding the rule from the VCAP
was inside vcap_api_debugfs file. So move the entire implementation in
vcap_api as this is used also by vcap_get_rule.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently whenever a new rule id is generated, it picks up the next
number bigger than previous id. So it would always be 1, 2, 3, etc.
When the rule with id 1 will be deleted and a new rule will be added,
it will have the id 4 and not id 1.
In theory this can be a problem if at some point a rule will be added
and removed ~0 times. Then no more rules can be added because there
are no more ids.
Change this such that when a new rule is added, search for an empty
rule id starting with value of 1 as value 0 is reserved.
Fixes: c9da1ac1c2 ("net: microchip: sparx5: Adding initial tc flower support for VCAP API")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20221128142959.8325-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On lan966x the layout of the vcap memory is different than on sparx5.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds support for making a copy of a rule and modify keys and actions
to differentiate the copy.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This ensures that the VCAP cache and the lists maintained in the VCAP
instance is protected when accessed by different clients.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This add support for displaying the keys and actions in a rule.
The keys and action display format will be determined by the size and the
type of the key or action. The longer keys will typically be displayed as a
hexadecimal byte array.
The actionset is not decoded in full as the Sparx5 IS2 only has one
supported action, so this will be added later with other VCAP types.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This add support to show all rules in a VCAP instance. The information
shown is:
- rule id
- address range
- size
- chain id
- keyset name, subword size, register span
- actionset name, subword size, register span
- counter value
- sticky bit (one bit width counter)
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for decoding VCAP rules with a minimum number of
attributes: address, rule size and keyset.
This allows for a quick inspection of a VCAP instance to determine if the
rule are present and in the correct order.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This ensures that the last_used_addr in a VCAP instance is returned to the
default value when all rules have been deleted.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides flower filter packet statistics (bytes are not supported) via
the dedicated IS2 counter feature.
All rules having the same TC cookie will contribute to the packet
statistics for the filter as they are considered to be part of the same TC
flower filter.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds API methods to set and get a rule counter.
A VCAP instance may contain the counter as part of the VCAP cache area, and
this counter may be one or more bits in width. This type of counter
automatically increments it value when the rule is hit.
Other VCAP instances have a dedicated counter area outside of the VCAP and
in this case the rule must contain the counter id to be able to locate the
counter value. In this case there must also be a rule action that updates
the counter using the rule id when the rule is hit.
The Sparx5 IS2 VCAP uses a dedicated counter area.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a sorting criteria to rule insertion and deletion.
The criteria is (in the listed order):
- Rule size (largest size first)
- User (based on an enumerated user value)
- Priority (highest priority first, aka lowest value)
When a rule is deleted the other rules may need to be moved to fill the gap
to use the available VCAP address space in the best possible way.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a tc matchall rule with a goto action to the VCAP specific chain to
enable the VCAP lookups.
If the matchall rule is removed the VCAP lookups will be disabled
again using its cookie as lookup to find the VCAP instance.
To enable the Sparx5 IS2 VCAP on eth0 you would use this command:
tc filter add dev eth0 ingress prio 5 handle 5 matchall \
skip_sw action goto chain 8000000
as the first lookup in IS2 has chain id 8000000
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for validating keyfields and actionfields when they are added
to a VCAP rule.
We need to ensure that the field is not already present and that the field
is in the key- or actionset, if the client has added a key- or actionset to
the rule at this point.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This tries to match the keys in a rule with the keysets supported by the
VCAP instance, and generate a list of keysets.
This list is then validated against the list of keysets that is currently
selected for the lookups (per port) in the VCAP configuration.
The Sparx5 IS2 only has one actionset, so there is no actionset matching
performed for now.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for a goto action and ensure that a HW offloaded TC flower
filter has a valid goto action and that pass and trap actions are not both
used in the same filter.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper function that finds the lookup index in a VCAP instance from
the chain id.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the following TC flower filter keys to Sparx5 for IS2:
- ipv4_addr (sip and dip)
- ipv6_addr (sip and dip)
- control (IPv4 fragments)
- portnum (tcp and udp port numbers)
- basic (L3 and L4 protocol)
- vlan (outer vlan tag info)
- tcp (tcp flags)
- ip (tos field)
as well as an 128 bit keyfield interface on the VCAP API to set the IPv6
addresses.
IS2 supports the classified VLAN information which amounts to the outer
VLAN info in case of multiple tags.
Here are some examples of the tc flower filter operations that are now
supported for the IS2 VCAP:
- IPv4 Addresses
tc filter add dev eth12 ingress chain 8000000 prio 12 handle 12 \
protocol ip flower skip_sw dst_ip 1.0.1.1 src_ip 2.0.2.2 \
action trap action goto chain 81000000
- IPv6 Addresses
tc filter add dev eth12 ingress chain 8000000 prio 13 handle 13 \
protocol ipv6 flower skip_sw dst_ip 1::1:1 src_ip 2::2:2 \
action trap action goto chain 81000000
- IPv4 fragments
tc filter add dev eth12 ingress chain 8000000 prio 14 handle 14 \
protocol ip flower skip_sw dst_ip 3.0.3.3 src_ip 2.0.2.2 \
ip_flags frag/nofirstfrag action trap action goto chain 81000000
- TCP and UDP portnumbers
tc filter add dev eth12 ingress chain 8000000 prio 21 handle 21 \
protocol ip flower skip_sw dst_ip 8.8.8.8 src_ip 2.0.2.2 \
ip_proto tcp dst_port 100 src_port 12000 action trap action goto
chain 81000000
tc filter add dev eth12 ingress chain 8000000 prio 23 handle 23 \
protocol ipv6 flower skip_sw dst_ip 5::5:5 src_ip 2::2:2 \
ip_proto tcp dst_port 300 src_port 13000 action trap action goto
chain 81000000
- Layer 3 and Layer 4 protocol info
tc filter add dev eth12 ingress chain 8000000 prio 28 handle 28 \
protocol ipv4 flower skip_sw dst_ip 9.0.9.9 src_ip 2.0.2.2 \
ip_proto icmp action trap action goto chain 81000000
- VLAN tag info (outer tag)
tc filter add dev eth12 ingress chain 8000000 prio 29 handle 29 \
protocol 802.1q flower skip_sw vlan_id 600 vlan_prio 6 \
vlan_ethtype ipv4 action trap action goto chain 81000000
tc filter add dev eth12 ingress chain 8000000 prio 31 handle 31 \
protocol 802.1q flower skip_sw vlan_id 600 vlan_prio 5 \
vlan_ethtype ipv6 action trap action goto chain 81000000
- TCP flags
tc filter add dev eth12 ingress chain 8000000 prio 15 handle 15 \
protocol ip flower skip_sw dst_ip 4.0.4.4 src_ip 2.0.2.2 \
ip_proto tcp tcp_flags 0x2a/0x3f action trap action goto chain
81000000
- IP info (IPv4 TOS field)
tc filter add dev eth12 ingress chain 8000000 prio 16 handle 16 \
protocol ip flower skip_sw ip_tos 0x35 dst_ip 5.0.5.5 \
src_ip 2.0.2.2 action trap action goto chain 81000000
Notes:
- The "protocol all" selection is not supported yet.
- The MAC address rule now needs to use non-ip and non "protocol all". Here
is an example:
tc filter add dev eth12 ingress chain 8000000 prio 10 handle 10 \
protocol 0xbeef flower skip_sw \
dst_mac 0a:0b:0c:0d:0e:0f \
src_mac 2:0:0:0:0:1 \
action trap action goto chain 81000000
- The VLAN rules use classified VLAN information, and to get the
classification information into the frame metadata, the ingress port need
to be added to a bridge with the VID and vlan filtering enabled, like
this (using VID 600 and four ports eth12, eth13, eth14 and eth15):
ip link add name br5 type bridge
ip link set dev br5 up
ip link set eth12 master br5
ip link set eth13 master br5
ip link set eth14 master br5
ip link set eth15 master br5
sysctl -w net.ipv6.conf.eth12.disable_ipv6=1
sysctl -w net.ipv6.conf.eth13.disable_ipv6=1
sysctl -w net.ipv6.conf.eth14.disable_ipv6=1
sysctl -w net.ipv6.conf.eth15.disable_ipv6=1
sysctl -w net.ipv6.conf.br5.disable_ipv6=1
ip link set dev br5 type bridge vlan_filtering 1
bridge vlan add dev eth12 vid 600
bridge vlan add dev eth13 vid 600
bridge vlan add dev eth14 vid 600
bridge vlan add dev eth15 vid 600
bridge vlan add dev br5 vid 600 self
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides a KUNIT test suite for the VCAP APIs encoding functionality.
The test can be run by adding these settings in a .kunitconfig file
CONFIG_KUNIT=y
CONFIG_NET=y
CONFIG_VCAP_KUNIT_TEST=y
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds rule encoding functionality to the VCAP API.
A rule consists of keys and actions in separate cache sections.
The maximum size of the keyset or actionset determines the size of the
rule.
The VCAP hardware need to be able to distinguish different rule sizes from
each other, and for that purpose some extra typegroup bits are added to the
rule when it is encoded.
The API provides a bit stream iterator that allows highlevel encoding
functionality to add key and action value bits independent of typegroup
bits.
This is handled by letting the concrete VCAP model provide the typegroup
table for the different rule sizes.
After the key and action values have been added to the encoding bit streams
the typegroup bits are set to their correct values just before the rule is
written to the VCAP hardware.
The key and action offsets provided in the VCAP model are the offset before
adding the typegroup bits.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides most of the rule handling needed to add a new rule to a VCAP.
To add a rule a client must follow these steps:
1) Allocate a new rule (provide an id or get one automatically assigned)
2) Add keys to the rule
3) Add actions to the rule
4) Optionally set a keyset on the rule
5) Optionally set an actionset on the rule
6) Validate the rule (this will add keyset and actionset if not specified
in the previous steps)
7) Add the rule (if the validation was successful)
8) Free the rule instance (a copy has been added to the VCAP)
The validation step will fail if there are no keysets with the requested
keys, or there are no actionsets with the requested actions.
The validation will also fail if the keyset is not configured for the port
for the requested protocol).
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides a default port keyset configuration for the Sparx5 IS2 VCAP
where all ports and all lookups in IS2 use the same keyset (MAC_ETYPE) for
all types of traffic.
This means that no matter what frame type is received on any front port it
will generate the MAC_ETYPE keyset in the IS VCAP and any rule in the IS2
VCAP that uses this keyset will be matched against the keys in the
MAC_ETYPE keyset.
The callback interface used by the VCAP API is populated with Sparx5
specific handler functions that takes care of the actual reading and
writing to data to the Sparx5 IS2 VCAP instance.
A few functions are also added to the VCAP API to support addition of rule
fields such as the ingress port mask and the lookup bit.
The IS2 VCAP in Sparx5 is really divided in two instances with lookup 0
and 1 in the first instance and lookup 2 and 3 in the second instance.
The lookup bit selects lookup 0 or 3 in the respective instance when it is
set.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds initial TC flower filter support to Sparx5 for the IS2 VCAP.
The support consists of the source and destination MAC addresses,
and the trap and pass actions.
This is how you can create a rule that test the functionality:
tc qdisc add dev eth0 clsact
tc filter add dev eth0 ingress chain 8000000 prio 10 handle 10 \
protocol all flower skip_sw \
dst_mac 0a:0b:0c:0d:0e:0f \
src_mac 2:0:0:0:0:1 \
action trap
The IS2 chains in Sparx5 are assigned like this:
- chain 8000000: IS2 Lookup 0
- chain 8100000: IS2 Lookup 1
- chain 8200000: IS2 Lookup 2
- chain 8300000: IS2 Lookup 3
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
