Once we enable -Wall for BPF sources, compiler will complain about lots
of unused variables, variables that are set but never read, etc.
Fix all these issues first before enabling -Wall in Makefile.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309054015.4068562-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test skb and xdp dynptr functionality in the following ways:
1) progs/test_cls_redirect_dynptr.c
* Rewrite "progs/test_cls_redirect.c" test to use dynptrs to parse
skb data
* This is a great example of how dynptrs can be used to simplify a
lot of the parsing logic for non-statically known values.
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t cls_redirect"):
original version: 0.092 sec
with dynptrs: 0.078 sec
2) progs/test_xdp_dynptr.c
* Rewrite "progs/test_xdp.c" test to use dynptrs to parse xdp data
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t xdp_attach"):
original version: 0.118 sec
with dynptrs: 0.094 sec
3) progs/test_l4lb_noinline_dynptr.c
* Rewrite "progs/test_l4lb_noinline.c" test to use dynptrs to parse
skb data
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t l4lb_all"):
original version: 0.062 sec
with dynptrs: 0.081 sec
For number of processed verifier instructions:
original version: 6268 insns
with dynptrs: 2588 insns
4) progs/test_parse_tcp_hdr_opt_dynptr.c
* Add sample code for parsing tcp hdr opt lookup using dynptrs.
This logic is lifted from a real-world use case of packet parsing
in katran [0], a layer 4 load balancer. The original version
"progs/test_parse_tcp_hdr_opt.c" (not using dynptrs) is included
here as well, for comparison.
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t parse_tcp_hdr_opt"):
original version: 0.031 sec
with dynptrs: 0.045 sec
5) progs/dynptr_success.c
* Add test case "test_skb_readonly" for testing attempts at writes
on a prog type with read-only skb ctx.
* Add "test_dynptr_skb_data" for testing that bpf_dynptr_data isn't
supported for skb progs.
6) progs/dynptr_fail.c
* Add test cases "skb_invalid_data_slice{1,2,3,4}" and
"xdp_invalid_data_slice{1,2}" for testing that helpers that modify the
underlying packet buffer automatically invalidate the associated
data slice.
* Add test cases "skb_invalid_ctx" and "xdp_invalid_ctx" for testing
that prog types that do not support bpf_dynptr_from_skb/xdp don't
have access to the API.
* Add test case "dynptr_slice_var_len{1,2}" for testing that
variable-sized len can't be passed in to bpf_dynptr_slice
* Add test case "skb_invalid_slice_write" for testing that writes to a
read-only data slice are rejected by the verifier.
* Add test case "data_slice_out_of_bounds_skb" for testing that
writes to an area outside the slice are rejected.
* Add test case "invalid_slice_rdwr_rdonly" for testing that prog
types that don't allow writes to packet data don't accept any calls
to bpf_dynptr_slice_rdwr.
[0] https://github.com/facebookincubator/katran/blob/main/katran/lib/bpf/pckt_parsing.h
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230301154953.641654-11-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Run spell checker on files in selftest/bpf and fixed typos.
Signed-off-by: Taichi Nishimura <awkrail01@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/bpf/20230216085537.519062-1-awkrail01@gmail.com
First test that we allow overwriting dynptr slots and reinitializing
them in unreferenced case, and disallow overwriting for referenced case.
Include tests to ensure slices obtained from destroyed dynptrs are being
invalidated on their destruction. The destruction needs to be scoped, as
in slices of dynptr A should not be invalidated when dynptr B is
destroyed. Next, test that MEM_UNINIT doesn't allow writing dynptr stack
slots.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-13-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Try creating a dynptr, then overwriting second slot with first slot of
another dynptr. Then, the first slot of first dynptr should also be
invalidated, but without our fix that does not happen. As a consequence,
the unfixed case allows passing first dynptr (as the kernel check only
checks for slot_type and then first_slot == true).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-12-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure that variable offset is handled correctly, and verifier takes
both fixed and variable part into account. Also ensures that only
constant var_off is allowed.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-11-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add verifier tests that verify the new pruning behavior for STACK_DYNPTR
slots, and ensure that state equivalence takes into account changes to
the old and current verifier state correctly. Also ensure that the
stacksafe changes are actually enabling pruning in case states are
equivalent from pruning PoV.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-10-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The previous commit implemented destroy_if_dynptr_stack_slot. It
destroys the dynptr which given spi belongs to, but still doesn't
invalidate the slices that belong to such a dynptr. While for the case
of referenced dynptr, we don't allow their overwrite and return an error
early, we still allow it and destroy the dynptr for unreferenced dynptr.
To be able to enable precise and scoped invalidation of dynptr slices in
this case, we must be able to associate the source dynptr of slices that
have been obtained using bpf_dynptr_data. When doing destruction, only
slices belonging to the dynptr being destructed should be invalidated,
and nothing else. Currently, dynptr slices belonging to different
dynptrs are indistinguishible.
Hence, allocate a unique id to each dynptr (CONST_PTR_TO_DYNPTR and
those on stack). This will be stored as part of reg->id. Whenever using
bpf_dynptr_data, transfer this unique dynptr id to the returned
PTR_TO_MEM_OR_NULL slice pointer, and store it in a new per-PTR_TO_MEM
dynptr_id register state member.
Finally, after establishing such a relationship between dynptrs and
their slices, implement precise invalidation logic that only invalidates
slices belong to the destroyed dynptr in destroy_if_dynptr_stack_slot.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, while reads are disallowed for dynptr stack slots, writes are
not. Reads don't work from both direct access and helpers, while writes
do work in both cases, but have the effect of overwriting the slot_type.
While this is fine, handling for a few edge cases is missing. Firstly,
a user can overwrite the stack slots of dynptr partially.
Consider the following layout:
spi: [d][d][?]
2 1 0
First slot is at spi 2, second at spi 1.
Now, do a write of 1 to 8 bytes for spi 1.
This will essentially either write STACK_MISC for all slot_types or
STACK_MISC and STACK_ZERO (in case of size < BPF_REG_SIZE partial write
of zeroes). The end result is that slot is scrubbed.
Now, the layout is:
spi: [d][m][?]
2 1 0
Suppose if user initializes spi = 1 as dynptr.
We get:
spi: [d][d][d]
2 1 0
But this time, both spi 2 and spi 1 have first_slot = true.
Now, when passing spi 2 to dynptr helper, it will consider it as
initialized as it does not check whether second slot has first_slot ==
false. And spi 1 should already work as normal.
This effectively replaced size + offset of first dynptr, hence allowing
invalid OOB reads and writes.
Make a few changes to protect against this:
When writing to PTR_TO_STACK using BPF insns, when we touch spi of a
STACK_DYNPTR type, mark both first and second slot (regardless of which
slot we touch) as STACK_INVALID. Reads are already prevented.
Second, prevent writing to stack memory from helpers if the range may
contain any STACK_DYNPTR slots. Reads are already prevented.
For helpers, we cannot allow it to destroy dynptrs from the writes as
depending on arguments, helper may take uninit_mem and dynptr both at
the same time. This would mean that helper may write to uninit_mem
before it reads the dynptr, which would be bad.
PTR_TO_MEM: [?????dd]
Depending on the code inside the helper, it may end up overwriting the
dynptr contents first and then read those as the dynptr argument.
Verifier would only simulate destruction when it does byte by byte
access simulation in check_helper_call for meta.access_size, and
fail to catch this case, as it happens after argument checks.
The same would need to be done for any other non-trivial objects created
on the stack in the future, such as bpf_list_head on stack, or
bpf_rb_root on stack.
A common misunderstanding in the current code is that MEM_UNINIT means
writes, but note that writes may also be performed even without
MEM_UNINIT in case of helpers, in that case the code after handling meta
&& meta->raw_mode will complain when it sees STACK_DYNPTR. So that
invalid read case also covers writes to potential STACK_DYNPTR slots.
The only loophole was in case of meta->raw_mode which simulated writes
through instructions which could overwrite them.
A future series sequenced after this will focus on the clean up of
helper access checks and bugs around that.
Fixes: 97e03f5210 ("bpf: Add verifier support for dynptrs")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the dynptr function is not checking the variable offset part
of PTR_TO_STACK that it needs to check. The fixed offset is considered
when computing the stack pointer index, but if the variable offset was
not a constant (such that it could not be accumulated in reg->off), we
will end up a discrepency where runtime pointer does not point to the
actual stack slot we mark as STACK_DYNPTR.
It is impossible to precisely track dynptr state when variable offset is
not constant, hence, just like bpf_timer, kptr, bpf_spin_lock, etc.
simply reject the case where reg->var_off is not constant. Then,
consider both reg->off and reg->var_off.value when computing the stack
pointer index.
A new helper dynptr_get_spi is introduced to hide over these details
since the dynptr needs to be located in multiple places outside the
process_dynptr_func checks, hence once we know it's a PTR_TO_STACK, we
need to enforce these checks in all places.
Note that it is disallowed for unprivileged users to have a non-constant
var_off, so this problem should only be possible to trigger from
programs having CAP_PERFMON. However, its effects can vary.
Without the fix, it is possible to replace the contents of the dynptr
arbitrarily by making verifier mark different stack slots than actual
location and then doing writes to the actual stack address of dynptr at
runtime.
Fixes: 97e03f5210 ("bpf: Add verifier support for dynptrs")
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230121002241.2113993-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert big chunks of dynptr and map_kptr subtests to use generic
verification_tester. They are switched from using manually maintained
tables of test cases, specifying program name and expected error
verifier message, to btf_decl_tag-based annotations directly on
corresponding BPF programs: __failure to specify that BPF program is
expected to fail verification, and __msg() to specify expected log
message.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207201648.2990661-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add an additional test, "data_slice_use_after_release2", for ensuring
that data slices are correctly invalidated by the verifier after the
dynptr whose ref obj id they track is released. In particular, this
tests data slice invalidation for dynptrs located at a non-zero offset
from the frame pointer.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220809214055.4050604-2-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch cleans up a few things:
* dynptr_fail.c:
There is no sys_nanosleep tracepoint. dynptr_fail only tests
that the prog load fails, so just SEC("?raw_tp") suffices here.
* test_bpf_cookie:
There is no sys_nanosleep kprobe. The prog is loaded in
userspace through bpf_program__attach_kprobe_opts passing in
SYS_NANOSLEEP_KPROBE_NAME, so just SEC("k{ret}probe") suffices here.
* test_helper_restricted:
There is no sys_nanosleep kprobe. test_helper_restricted only tests
that the prog load fails, so just SEC("?kprobe")( suffices here.
There are no functional changes.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220805171405.2272103-1-joannelkoong@gmail.com
Commit 13bbbfbea7 ("bpf: Add bpf_dynptr_read and bpf_dynptr_write")
added the bpf_dynptr_write() and bpf_dynptr_read() APIs.
However, it will be needed for some dynptr types to pass in flags as
well (e.g. when writing to a skb, the user may like to invalidate the
hash or recompute the checksum).
This patch adds a "u64 flags" arg to the bpf_dynptr_read() and
bpf_dynptr_write() APIs before their UAPI signature freezes where
we then cannot change them anymore with a 5.19.x released kernel.
Fixes: 13bbbfbea7 ("bpf: Add bpf_dynptr_read and bpf_dynptr_write")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220706232547.4016651-1-joannelkoong@gmail.com
This patch adds tests for dynptrs, which include cases that the
verifier needs to reject (for example, a bpf_ringbuf_reserve_dynptr
without a corresponding bpf_ringbuf_submit/discard_dynptr) as well
as cases that should successfully pass.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-7-joannelkoong@gmail.com
