25795 commits

Author	SHA1	Message	Date
Stephen Boyd	d75c26a926	Merge branches 'clk-rockchip', 'clk-ingenic', 'clk-bindings', 'clk-samsung' and 'clk-stm' into clk-next ... - Mark some clks critical on Ingenic X1000 - Add STM32MP13 RCC driver (Reset Clock Controller) * clk-rockchip: dt-bindings: clock: convert rockchip,rk3368-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3228-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3308-cru.txt to YAML dt-bindings: clock: convert rockchip,px30-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3288-cru.txt to YAML dt-bindings: clock: convert rockchip,rv1108-cru.txt to YAML dt-binding: clock: Add missing rk3568 cru bindings clk: rockchip: Mark hclk_vo as critical on rk3568 dt-bindings: clock: fix rk3399 cru clock issues dt-bindings: clock: use generic node name for pmucru example in rockchip,rk3399-cru.yaml dt-bindings: clock: replace a maintainer for rockchip,rk3399-cru.yaml dt-bindings: clock: fix some conversion style issues for rockchip,rk3399-cru.yaml * clk-ingenic: clk: ingenic-tcu: Fix missing TCU clock for X1000 SoCs mips: ingenic: Do not manually reference the CPU clock clk: ingenic: Mark critical clocks in Ingenic SoCs clk: ingenic: Allow specifying common clock flags * clk-bindings: dt-bindings: clock: Replace common binding with link to schema * clk-samsung: dt-bindings: clock: exynosautov9: correct count of NR_CLK clk: samsung: exynosautov9: add cmu_peric1 clock support clk: samsung: exynosautov9: add cmu_peric0 clock support clk: samsung: exynosautov9: add cmu_fsys2 clock support clk: samsung: exynosautov9: add cmu_busmc clock support clk: samsung: exynosautov9: add cmu_peris clock support clk: samsung: exynosautov9: add cmu_core clock support clk: samsung: add top clock support for Exynos Auto v9 SoC dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings dt-bindings: clock: add clock binding definitions for Exynos Auto v9 * clk-stm: clk: stm32mp13: add safe mux management clk: stm32mp13: add multi mux function clk: stm32mp13: add all STM32MP13 kernel clocks clk: stm32mp13: add all STM32MP13 peripheral clocks clk: stm32mp13: manage secured clocks clk: stm32mp13: add composite clock clk: stm32mp13: add stm32 divider clock clk: stm32mp13: add stm32_gate management clk: stm32mp13: add stm32_mux clock management clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller) dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC	2022-05-25 00:27:09 -07:00
Stephen Boyd	d3d88716a6	Merge branches 'clk-ux500', 'clk-mtk', 'clk-tegra', 'clk-allwinner' and 'clk-imx' into clk-next ... - Convert ux500 to clk_hw - Add the two missing CLKOUT clocks for U8500/DB8500 SoC - MediaTek MT8186 SoC clk support - Move MediaTek driver to clk_hw provider APIs * clk-ux500: clk: ux500: fix a possible off-by-one in u8500_prcc_reset_base() clk: ux500: Implement the missing CLKOUT clocks clk: ux500: Rewrite PRCMU clocks to use clk_hw_* clk: ux500: Drop .is_prepared state from PRCMU clocks clk: ux500: Drop .is_enabled state from PRCMU clocks dt-bindings: clock: u8500: Add clkout clock bindings * clk-mtk: (22 commits) clk: mediatek: mt8173: Switch to clk_hw provider APIs clk: mediatek: Switch to clk_hw provider APIs clk: mediatek: Replace 'struct clk' with 'struct clk_hw' clk: mediatek: apmixed: Drop error message from clk_register() failure clk: mediatek: Make mtk_clk_register_composite() static clk: mediatek: use en_mask as a pure div_en_mask clk: mediatek: update compatible string for MT7986 ethsys clk: mediatek: Add MT8186 ipesys clock support clk: mediatek: Add MT8186 mdpsys clock support clk: mediatek: Add MT8186 camsys clock support clk: mediatek: Add MT8186 vencsys clock support clk: mediatek: Add MT8186 vdecsys clock support clk: mediatek: Add MT8186 imgsys clock support clk: mediatek: Add MT8186 wpesys clock support clk: mediatek: Add MT8186 mmsys clock support clk: mediatek: Add MT8186 mfgsys clock support clk: mediatek: Add MT8186 imp i2c wrapper clock support clk: mediatek: Add MT8186 apmixedsys clock support clk: mediatek: Add MT8186 infrastructure clock support clk: mediatek: Add MT8186 topckgen clock support ... * clk-tegra: clk: tegra: Update kerneldoc to match prototypes clk: tegra: Replace .round_rate() with .determine_rate() clk: tegra: Register clocks from root to leaf clk: tegra: Add missing reset deassertion * clk-allwinner: clk: sunxi-ng: h616: Add PLL derived 32KHz clock clk: sunxi-ng: h6-r: Add RTC gate clock * clk-imx: clk: imx8mp: fix usb_root_clk parent clk: imx8mp: add clkout1/2 support clk: imx: scu: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage clk: imx8mp: Add DISP2 pixel clock clk: imx: scu: fix a potential memory leak in __imx_clk_gpr_scu() clk: imx: Add check for kcalloc clk: imx8mn: add GPT support dt-bindings: imx: add clock bindings for i.MX8MN GPT clk: imx: Remove the snvs clock clk: imx8m: check mcore_booted before register clk clk: imx: add mcore_booted module paratemter clk: imx8mq: add 27m phy pll ref clock	2022-05-25 00:26:52 -07:00
Stephen Boyd	2c29798c5d	Merge branches 'clk-ti', 'clk-cleanup', 'clk-airoha', 'clk-i2c-simple' and 'clk-renesas' into clk-next ... - Airoha EN7523 SoC system clocks - Use i2c driver probe_new to avoid id scans * clk-ti: clk: ti: clkctrl: replace usage of found with dedicated list iterator variable clk: ti: composite: Prefer kcalloc over open coded arithmetic clk: keystone: syscon-clk: Add support for AM62 epwm-tbclk dt-bindings: clock: ehrpwm: Add AM62 specific compatible * clk-cleanup: clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc() clk: fixed-rate: Remove redundant if statement clk: mux: remove redundant initialization of variable width clk: using pm_runtime_resume_and_get instead of pm_runtime_get_sync clk: actions: remove redundant assignment after a mask operation * clk-airoha: clk: en7523: fix wrong pointer check in en7523_clk_probe() clk: en7523: Add clock driver for Airoha EN7523 SoC dt-bindings: Add en7523-scu device tree binding documentation * clk-i2c-simple: clk: renesas-pcie: use simple i2c probe function clk: si570: use i2c_match_id and simple i2c probe clk: si544: use i2c_match_id and simple i2c probe clk: si5351: use i2c_match_id and simple i2c probe clk: si5341: use simple i2c probe function clk: si514: use simple i2c probe function clk: max9485: use simple i2c probe function clk: cs2000-cp: use simple i2c probe function clk: cdce925: use i2c_match_id and simple i2c probe clk: cdce706: use simple i2c probe function * clk-renesas: (48 commits) clk: renesas: r9a09g011: Add eth clock and reset entries clk: renesas: Add RZ/V2M support using the rzg2l driver clk: renesas: rzg2l: Add support for RZ/V2M reset monitor reg clk: renesas: rzg2l: Make use of CLK_MON registers optional clk: renesas: rzg2l: Set HIWORD mask for all mux and dividers clk: renesas: rzg2l: Add read only versions of the clk macros clk: renesas: rzg2l: Move the DEF_MUX array size calc into the macro dt-bindings: clock: renesas,rzg2l: Document RZ/V2M SoC clk: renesas: r9a07g044: Fix OSTM1 module clock name clk: renesas: r9a07g043: Add clock and reset entries for ADC clk: renesas: r9a07g043: Add TSU clock and reset entry clk: renesas: r9a07g043: Add RSPI clock and reset entries clk: renesas: r9a07g043: Add clock and reset entries for SPI Multi I/O Bus Controller clk: renesas: r9a07g044: Add DSI clock and reset entries clk: renesas: r9a07g044: Add LCDC clock and reset entries clk: renesas: r9a07g044: Add M4 Clock support clk: renesas: r9a07g044: Add M3 Clock support clk: renesas: r9a07g044: Add {M2, M2_DIV2} Clocks support clk: renesas: r9a07g044: Add M1 clock support clk: renesas: rzg2l: Add DSI divider clk support ...	2022-05-25 00:26:38 -07:00
Linus Torvalds	827060261c	media updates for v5.19-rc1 ... -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmKLMPAACgkQCF8+vY7k 4RVupA//Q4U2BV3xKn9H3g/+dbSIbm0YEeWc2xMd3wbDnqokXsKxOuIfG1omIxCf hfhfnEfhRo0WHc5AGaHtbodCU3HcCrNdjH59r6nwedQg3qgFwMT4FYDNW33E8PN1 dj293GEUZ+BZGDoCatGOxlHi/I2/HcS3I6BiU/GlglALgM/8KaBvdMhY8S6lEXIK SqdiDDOsXVT+v1BB2PSSaRWU3KIccLzS2QlXQRTs2xKszXuQy6wT6IK//YqvFxQp PS9uziJhJNk2nIlZqE8U46iYv9v+HnTW/5cLrUDTj0VIxjWHgMSnpbubOABgBRYj gX1wXRqe/bx9frm1ksfBUyNmEmxF3LL2h6fnkc2RQh/T/DKwMFpE9u3P8aEIPtmk djACoQbdjJXKtez1Uw5KT1nH8EKfgeA5z/PkFw+zYMiXtNdhIgxFBg38veI+/jsB w8nUPydFWy/EpmgTbQTmvbF9c+LczqUgaMSbXKzLByVfxie/SsE/JRyLXQITByVT QmmZ3WTKjTJYa1gEz2lvIafhTxXWu7mnBo7ma1wSXVPSkwOr2m73aIfxf1h1vr/N +/sCOEeQiVT67arKbdlmf7IDvNzcRmnBTdSE//VkJGonaBAjrpUuRD4Yq61YCVon DqVh29LGeFDmkRkcvfZVT2Si/UwDAYhHa8yb0lPZpVXhKbCxLUQ= =HllR -----END PGP SIGNATURE----- Merge tag 'media/v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - dvb-usb drivers entries got reworked to avoid usage of magic numbers to refer to data position inside tables - vcodec driver has gained support for MT8186 and for vp8 and vp9 stateless codecs - hantro has gained support for Hantro G1 on RK366x - Added more h264 levels on coda960 - ccs gained support for MIPI CSI-2 28 bits per pixel raw data type - venus driver gained support for Qualcomm custom compressed pixel formats - lots of driver fixes and updates * tag 'media/v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: hantro: Enable HOLD_CAPTURE_BUF for H.264 media: hantro: Add H.264 field decoding support media: hantro: h264: Make dpb entry management more robust media: hantro: Stop using H.264 parameter pic_num media: rkvdec: Enable capture buffer holding for H264 media: rkvdec-h264: Add field decoding support media: rkvdec: Ensure decoded resolution fit coded resolution media: rkvdec: h264: Fix reference frame_num wrap for second field media: rkvdec: h264: Validate and use pic width and height in mbs media: rkvdec: Move H264 SPS validation in rkvdec-h264 media: rkvdec: h264: Fix bit depth wrap in pps packet media: rkvdec: h264: Fix dpb_valid implementation media: rkvdec: Stop overclocking the decoder media: v4l2: Reorder field reflist media: h264: Sort p/b reflist using frame_num media: v4l2: Trace calculated p/b0/b1 initial reflist media: h264: Store all fields into the unordered list media: h264: Store current picture fields media: h264: Increase reference lists size to 32 media: h264: Use v4l2_h264_reference for reflist ...	2022-05-24 18:09:16 -07:00
Linus Torvalds	f4fb859665	Thermal control updates for 5.19-rc1 ... - Add thermal library and thermal tools to encapsulate the netlink into event based callbacks (Daniel Lezcano, Jiapeng Chong). - Improve overheat condition handling during suspend-to-idle in the Intel PCH thermal driver (Zhang Rui). - Use local ops instead of global ops in devfreq_cooling (Kant Fan). - Clean up _OSC handling in int340x (Davidlohr Bueso). - Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr() (Hesham Almatary). - Add new k3 j72xx bangdap driver and the corresponding bindings (Keerthy). - Fix missing of_node_put() in the SC iMX driver at probe time (Miaoqian Lin). - Fix memory leak in __thermal_cooling_device_register() when device_register() fails by calling thermal_cooling_device_destroy_sysfs() (Yang Yingliang). - Add sc8180x and sc8280xp compatible string in the DT bindings and lMH support for QCom tsens driver (Bjorn Andersson). - Fix OTP Calibration Register values conforming to the documentation on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das). - Fix type in kerneldoc description for __thermal_bind_params (Corentin Labbe). - Fix potential NULL dereference in sr_thermal_probe() on Broadcom platform (Zheng Yongjun). - Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu Pallikunhi). - Fix non-negative value support by preventing the value to be clamp to zero (Stefan Wahren). - Add compatible string and DT bindings for MSM8960 tsens driver (Dmitry Baryshkov). - Add hwmon support for K3 driver (Massimiliano Minella). - Refactor and add multiple generations support for QCom ADC driver (Jishnu Prakash). - Use platform_get_irq_optional() to get the interrupt on RCar driver and document Document RZ/V2L bindings (Lad Prabhakar). - Remove NULL check after container_of() call from the Intel HFI thermal driver (Haowen Bai). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmKL3MESHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxgzsQAKj4D0ROHLdqReYeIutS7IU6YQ+ejh3N krcAZvxQd8B3sVwSHHABPdsHwwfYjP4BwoHHVtha5q+5zFGBq5F3fJHsDeRxN23T NEOW81HBaLu81N5gNuAYg+NQcdqBR4U4IGKZfxWRyx13OMECXGtJRb/SIW/TuDYk AQIrqOivVEsVRtn+qp+x0rKHsj6ge+2lU1OyJagr2BDhgLrwzxl6cmNBfali1C3D sw4SqGwGVjEB0QDDpMbty9BsLEjNRE86kwoPh2u0K9dT9/b/P9pk1lp+pOnltspZ eOdwr0CtoEHw2x5tuhbO7fmvNIuf5jgSDWsCrP/xYnsozcRiwWsgyeJj4f5soreN kTJB8S/FH+fd7UuYqdmDIeJpDnkkGt1jIqjkDvfJNL7ffBWIe/meXKF4vBnrdlbd FMNQwzgc5eug07IFjOE43V1v5Hw1H1leVUwZczOMGNIhqyy0WZyQr7vzwbr16jCO x0hu3q3Y++5SUAUy9WzsOOrpRHa9JxUwVhZuLG7ajf+6pqPxB8kqs9CJe+sgWKju T4KqHbljJ2Gnkm9SngT0BdnB+AgparhXf8/8Mj0ZBQvamXw+ylNbYfG7qTZk5Ne/ rUf4YDew6hGDqikyJBe2e0a1lLSoN4zaADC1lLYhC+Zp7m6eK0r3y3mhic0bZe1c RU/2eeA4kTuZ =3ltV -----END PGP SIGNATURE----- Merge tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These add a thermal library and thermal tools to wrap the netlink interface into event-based callbacks, improve overheat condition handling during suspend-to-idle on Intel SoCs, add some new hardware support, fix bugs and clean up code. Specifics: - Add thermal library and thermal tools to encapsulate the netlink into event based callbacks (Daniel Lezcano, Jiapeng Chong). - Improve overheat condition handling during suspend-to-idle in the Intel PCH thermal driver (Zhang Rui). - Use local ops instead of global ops in devfreq_cooling (Kant Fan). - Clean up _OSC handling in int340x (Davidlohr Bueso). - Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr() (Hesham Almatary). - Add new k3 j72xx bangdap driver and the corresponding bindings (Keerthy). - Fix missing of_node_put() in the SC iMX driver at probe time (Miaoqian Lin). - Fix memory leak in __thermal_cooling_device_register() when device_register() fails by calling thermal_cooling_device_destroy_sysfs() (Yang Yingliang). - Add sc8180x and sc8280xp compatible string in the DT bindings and lMH support for QCom tsens driver (Bjorn Andersson). - Fix OTP Calibration Register values conforming to the documentation on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das). - Fix type in kerneldoc description for __thermal_bind_params (Corentin Labbe). - Fix potential NULL dereference in sr_thermal_probe() on Broadcom platform (Zheng Yongjun). - Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu Pallikunhi). - Fix non-negative value support by preventing the value to be clamp to zero (Stefan Wahren). - Add compatible string and DT bindings for MSM8960 tsens driver (Dmitry Baryshkov). - Add hwmon support for K3 driver (Massimiliano Minella). - Refactor and add multiple generations support for QCom ADC driver (Jishnu Prakash). - Use platform_get_irq_optional() to get the interrupt on RCar driver and document Document RZ/V2L bindings (Lad Prabhakar). - Remove NULL check after container_of() call from the Intel HFI thermal driver (Haowen Bai)" * tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits) thermal: intel: pch: improve the cooling delay log thermal: intel: pch: enhance overheat handling thermal: intel: pch: move cooling delay to suspend_noirq phase PM: wakeup: expose pm_wakeup_pending to modules thermal: k3_j72xx_bandgap: Add the bandgap driver support dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe thermal/core: Fix memory leak in __thermal_cooling_device_register() dt-bindings: thermal: tsens: Add sc8280xp compatible dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible thermal/drivers/qcom/lmh: Add sc8180x compatible thermal/drivers/rz2gl: Fix OTP Calibration Register values dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings thermal: thermal_of: fix typo on __thermal_bind_params tools/thermal: remove unneeded semicolon tools/lib/thermal: remove unneeded semicolon thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe tools/thermal: Add thermal daemon skeleton tools/thermal: Add a temperature capture tool tools/thermal: Add util library ...	2022-05-24 16:19:30 -07:00
Linus Torvalds	09583dfed2	Power management updates for 5.19-rc1 ... - Update the Energy Model support code to allow the Energy Model to be artificial, which means that the power values may not be on a uniform scale with other devices providing power information, and update the cpufreq_cooling and devfreq_cooling thermal drivers to support artificial Energy Models (Lukasz Luba). - Make DTPM check the Energy Model type (Lukasz Luba). - Fix policy counter decrementation in cpufreq if Energy Model is in use (Pierre Gondois). - Add CPU-based scaling support to passive devfreq governor (Saravana Kannan, Chanwoo Choi). - Update the rk3399_dmc devfreq driver (Brian Norris). - Export dev_pm_ops instead of suspend() and resume() in the IIO chemical scd30 driver (Jonathan Cameron). - Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and PM-runtime counterparts (Jonathan Cameron). - Move symbol exports in the IIO chemical scd30 driver into the IIO_SCD30 namespace (Jonathan Cameron). - Avoid device PM-runtime usage count underflows (Rafael Wysocki). - Allow dynamic debug to control printing of PM messages (David Cohen). - Fix some kernel-doc comments in hibernation code (Yang Li, Haowen Bai). - Preserve ACPI-table override during hibernation (Amadeusz Sławiński). - Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson). - Make Intel RAPL power capping driver support the RaptorLake and AlderLake N processors (Zhang Rui, Sumeet Pawnikar). - Remove redundant store to value after multiply in the RAPL power capping driver (Colin Ian King). - Add AlderLake processor support to the intel_idle driver (Zhang Rui). - Fix regression leading to no genpd governor in the PSCI cpuidle driver and fix the riscv-sbi cpuidle driver to allow a genpd governor to be used (Ulf Hansson). - Fix cpufreq governor clean up code to avoid using kfree() directly to free kobject-based items (Kevin Hao). - Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy). - Make intel_pstate notify frequency invariance code when no_turbo is turned on and off (Chen Yu). - Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas Pandruvada). - Make cpufreq avoid unnecessary frequency updates due to mismatch between hardware and the frequency table (Viresh Kumar). - Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify code (Viresh Kumar). - Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the calling convention for some driver callbacks consistent (Rafael Wysocki). - Avoid accessing half-initialized cpufreq policies from the show() and store() sysfs functions (Schspa Shi). - Rearrange cpufreq_offline() to make the calling convention for some driver callbacks consistent (Schspa Shi). - Update CPPC handling in cpufreq (Pierre Gondois). - Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski). - Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf Hansson). - Improve the way genpd deals with its governors (Ulf Hansson). - Update the turbostat utility to version 2022.04.16 (Len Brown, Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmKL3hsSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxW4oP/RzMh6dclWXs3J/gUCKTqRepq6cb80tq Q2r9xRRHwy6ZH/PVddGDHmhQ7d3NAv13s4srA9kznZognF3hzuxnGau226ilDqHh qxVSBRjWY9ijxRBvkcCaa6HZm4Chb91pUX0CLpdYSl9BTgIdk66HZYaMsKhHU/di j7KKHPdKyyQkssWnMjGEyuaF+UebiEgISCF3+X0eb6c1m7GHXpgLJVxNy0pKkUdK j+n6+ms12OlVLtg1eIl0J5824w/rkK3ZdqfEXJSq++mNMqSj/KCI3yWpzsLKp9AB xxhox/tPgJVyON8Vtbb2IkWkiQUKeSrAGIUYXWmnwIZYLPSGD7BPzr82Cxr7S/ez imMB+1Qd3SsOQ9EdI9rGYgNsEF2vOs1xjMehSdUdmTz148IzBOBt4YyQeb/mfXqH nh9eVuFCzqH1lAayYt6iP1+V5gQn9as/+rR91k4k4A6OKXomuQUGORLeHfuKMfNH eBZ72tdXqiq6z+ag3lY3pBAMSm11epCOa3VR6QNaC7hrlY3AZP+o3tIUL6W813b+ V3l1gWApGHZE1hiDM95dll/dIt9IZpTRd3dlqF/YnFW7fPDrz71EGvhrZpO7vdO0 /G6eJcCDjqJVcbCE8Y77I6/AXjpVQ7PRPeNx6aW7jPcQhpVIgcsF2BGjk9anjXDs 3yHJs9R/HMmA =Hewm -----END PGP SIGNATURE----- Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add support for 'artificial' Energy Models in which power numbers for different entities may be in different scales, add support for some new hardware, fix bugs and clean up code in multiple places. Specifics: - Update the Energy Model support code to allow the Energy Model to be artificial, which means that the power values may not be on a uniform scale with other devices providing power information, and update the cpufreq_cooling and devfreq_cooling thermal drivers to support artificial Energy Models (Lukasz Luba). - Make DTPM check the Energy Model type (Lukasz Luba). - Fix policy counter decrementation in cpufreq if Energy Model is in use (Pierre Gondois). - Add CPU-based scaling support to passive devfreq governor (Saravana Kannan, Chanwoo Choi). - Update the rk3399_dmc devfreq driver (Brian Norris). - Export dev_pm_ops instead of suspend() and resume() in the IIO chemical scd30 driver (Jonathan Cameron). - Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and PM-runtime counterparts (Jonathan Cameron). - Move symbol exports in the IIO chemical scd30 driver into the IIO_SCD30 namespace (Jonathan Cameron). - Avoid device PM-runtime usage count underflows (Rafael Wysocki). - Allow dynamic debug to control printing of PM messages (David Cohen). - Fix some kernel-doc comments in hibernation code (Yang Li, Haowen Bai). - Preserve ACPI-table override during hibernation (Amadeusz Sławiński). - Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson). - Make Intel RAPL power capping driver support the RaptorLake and AlderLake N processors (Zhang Rui, Sumeet Pawnikar). - Remove redundant store to value after multiply in the RAPL power capping driver (Colin Ian King). - Add AlderLake processor support to the intel_idle driver (Zhang Rui). - Fix regression leading to no genpd governor in the PSCI cpuidle driver and fix the riscv-sbi cpuidle driver to allow a genpd governor to be used (Ulf Hansson). - Fix cpufreq governor clean up code to avoid using kfree() directly to free kobject-based items (Kevin Hao). - Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy). - Make intel_pstate notify frequency invariance code when no_turbo is turned on and off (Chen Yu). - Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas Pandruvada). - Make cpufreq avoid unnecessary frequency updates due to mismatch between hardware and the frequency table (Viresh Kumar). - Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify code (Viresh Kumar). - Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the calling convention for some driver callbacks consistent (Rafael Wysocki). - Avoid accessing half-initialized cpufreq policies from the show() and store() sysfs functions (Schspa Shi). - Rearrange cpufreq_offline() to make the calling convention for some driver callbacks consistent (Schspa Shi). - Update CPPC handling in cpufreq (Pierre Gondois). - Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski). - Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf Hansson). - Improve the way genpd deals with its governors (Ulf Hansson). - Update the turbostat utility to version 2022.04.16 (Len Brown, Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)" * tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits) PM: domains: Trust domain-idle-states from DT to be correct by genpd PM: domains: Measure power-on/off latencies in genpd based on a governor PM: domains: Allocate governor data dynamically based on a genpd governor PM: domains: Clean up some code in pm_genpd_init() and genpd_remove() PM: domains: Fix initialization of genpd's next_wakeup PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd PM: domains: Measure suspend/resume latencies in genpd based on governor PM: domains: Move the next_wakeup variable into the struct gpd_timing_data PM: domains: Allocate gpd_timing_data dynamically based on governor PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain() PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd PM: domains: Drop redundant code for genpd always-on governor PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor powercap: intel_rapl: remove redundant store to value after multiply cpufreq: CPPC: Enable dvfs_possible_from_any_cpu cpufreq: CPPC: Enable fast_switch ACPI: CPPC: Assume no transition latency if no PCCT ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported ACPI: CPPC: Check _OSC for flexible address space ...	2022-05-24 16:04:25 -07:00
Linus Torvalds	d8e0f976f1	spi: Updates for v5.19 ... This is quite a quiet release but some new drivers mean that the diffstat is fairly large, the new drivers include the aspeed driver which is migrated from MTD as part of the ongoing move of controllers with specialised support for SPI flashes into the SPI subsystem. - Support for devices which flip CPHA during recieve only transfers (eg, if MOSI and MISO have inverted polarity). - Overhaul of the i.MX driver, including the addition of PIO support for better performance on small transfers. - Migration of the Aspeed driver from MTD. - Support for Aspeed AST2400, Ingenic JZ4775 and X1/2000 and MediaTek IPM and SFI. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKLh9wACgkQJNaLcl1U h9ApgAf/SvcHRyM06hw+00D2PAco7mxSiAs7rebxj4f0zPRNvUrYbUDWjakeKjoB ocmpY6AW/vRBUM9xZsiQiLp/9NPltnVghZIBgp5gcS8zaXdxiZjZ68Z+uYp9SP9v zj8F6bBQzk3lvuY+Cr1f68iXICA62Aa1yX28UFVLZkV0d+0AazpECZkb3hjOiL6P 0qSV6IfoFlJXYsyvAS4/MqYrHklSCD/0Ek09V9jPpZJPHn1ldbFs5zkstfs0PMc/ YeDlpStkjJE4OQ6+z6Ou/wGbcw11nWvKCSqF4bGRXLrgR/uIjOKomwOzaBUf/A6Q AxQcKMtsBTx0VzYmwJwopj0qDvOq/A== =6yj3 -----END PGP SIGNATURE----- Merge tag 'spi-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This is quite a quiet release but some new drivers mean that the diffstat is fairly large. The new drivers include the aspeed driver which is migrated from MTD as part of the ongoing move of controllers with specialised support for SPI flashes into the SPI subsystem. - Support for devices which flip CPHA during recieve only transfers (eg, if MOSI and MISO have inverted polarity). - Overhaul of the i.MX driver, including the addition of PIO support for better performance on small transfers. - Migration of the Aspeed driver from MTD. - Support for Aspeed AST2400, Ingenic JZ4775 and X1/2000 and MediaTek IPM and SFI" * tag 'spi-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (84 commits) spi: spi-au1550: replace ternary operator with min() mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600 spi: aspeed: Calibrate read timings spi: aspeed: Add support for the AST2400 SPI controller spi: aspeed: Workaround AST2500 limitations spi: aspeed: Adjust direct mapping to device size spi: aspeed: Add support for direct mapping spi: spi-mem: Convert Aspeed SMC driver to spi-mem spi: Convert the Aspeed SMC controllers device tree binding spi: spi-cadence: Update ISR status variable type to irqreturn_t spi: Doc fix - Describe add_lock and dma_map_dev in spi_controller spi: cadence-quadspi: Handle spi_unregister_master() in remove() spi: stm32-qspi: Remove SR_BUSY bit check before sending command spi: stm32-qspi: Always check SR_TCF flags in stm32_qspi_wait_cmd() spi: stm32-qspi: Fix wait_cmd timeout in APM mode spi: cadence-quadspi: remove unnecessary (void *) casts spi: cadence-quadspi: Add missing blank line in cqspi_request_mmap_dma() spi: spi-imx: mx51_ecspi_prepare_message(): skip writing MX51_ECSPI_CONFIG register if unchanged spi: spi-imx: add PIO polling support spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller ...	2022-05-24 15:13:30 -07:00
Linus Torvalds	9b18d07ba3	regulator: Updates for v5.19 ... This is mostly a drivers update including a couple of new drivers but we do have some fixes and improvements to the core as well. - Make sure we don't log spuriously about uncontrollable regulators. - Don't use delays when we should use sleeps for regulators with larger ramp times. - Support for MediaTek MT6358 and MT6366, Richtek RT5759 and Silicon Mitus SM5703. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKLhDkACgkQJNaLcl1U h9BC2ggAhixM/fsZZskBg2x8+zwCxa1WIoEOxQdo5fzYKSSLD6fzHZWc7jtww2KH vMKE7McaX5M/xoEKWEAUutzMzaMHwLJkvUjWxlzQcOQWG7Z6Mhu5tifcdDc6Y0V2 oicpXZx7wtDDpkrmSYR+UEIcAtnWYHCIvMHZwZBk1YSeTiaajUlBAtxKLIvCl1Bg ftVLvA0YHWv4LgDWYAGI/W0Ynh8kznsKv9qrkw1LekrdjCxe0Wo0YB0XDAKIMI7z a/SPgr7SbSsKqYuN1cGHIs+3gzb4mr2ofQTPzn5gIbOSuaQ+T4f6zI/hvNPkzIag seqGXGig5FEqtY7plOoaLq7uJXtvuA== =etnu -----END PGP SIGNATURE----- Merge tag 'regulator-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This is mostly a drivers update including a couple of new drivers but we do have some fixes and improvements to the core as well. - Make sure we don't log spuriously about uncontrollable regulators. - Don't use delays when we should use sleeps for regulators with larger ramp times. - Support for MediaTek MT6358 and MT6366, Richtek RT5759 and Silicon Mitus SM5703" * tag 'regulator-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits) regulator: scmi: Fix refcount leak in scmi_regulator_probe regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt regulator: qcom_smd: Fix up PM8950 regulator configuration regulator: core: Fix enable_count imbalance with EXCLUSIVE_GET regulator: core: Add error flags to sysfs attributes regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on PMR735A regulator: dt-bindings: qcom,rpmh: document supplies per variant regulator: dt-bindings: qcom,rpmh: update maintainers regulator: mt6315: Enforce regulator-compatible, not name regulator: pca9450: Enable DVS control via PMIC_STBY_REQ regulator: pca9450: Make warm reset on WDOG_B assertion regulator: Add property for WDOG_B warm reset regulator: pca9450: Make I2C Level Translator configurable regulator: Add property for I2C level shifter regulator: sm5703: Correct reference to the common regulator schema regulator: sm5703-regulator: Add regulators support for SM5703 MFD dt-bindings: regulator: Add bindings for Silicon Mitus SM5703 regulators regulator: richtek,rt4801: parse GPIOs per regulator regulator: dt-bindings: richtek,rt4801: use existing ena_gpiod feature regulator: core: Sleep (not delay) in set_voltage() ...	2022-05-24 15:09:47 -07:00
Linus Torvalds	638971b77f	MMC core: ... - Support zero-out using TRIM for eMMC - Allow to override the busy-timeout for the ioctl-cmds MMC host: - Continued the conversion of DT bindings into the JSON schema - jz4740: Apply DMA engine limits to maximum segment size - mmci_stm32: Use a buffer for unaligned DMA requests - mmc_spi: Enabled high-speed modes via parsing of DT - omap: Make clock management to be compliant with CCF - renesas_sdhi: Support eMMC HS400 mode for R-Car V3H ES2.0 - renesas_sdhi: Don't allow support for eMMC HS400 for R-Car V3M/D3 - sdhci_am654: Fix problem when SD card slot lacks the card detect line - sdhci-esdhc-imx: Add support for the imx8dxl variant - sdhci-brcmstb: Enable support for clock gating to save power - sdhci-msm: Add support for the sdx65 variant - sdhci-msm: Add support for the sm8150 variant - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant - sdhci-pci-gli: Add workaround to allow GL9755 to enter ASPM L1.2 -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmKLelkXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCk+Lg/8Ck1m60yrij05TD4qmLTdodBi 8qR4bfxHyfQrtz2k6+Uy7nJFtYqr4+YVgiyUUSfiptofIBciT8gn3lrWXmt5+ZKU ATpz2n40DmPHF54ngBCplIUc22+4toTEoHbwpQmHivUWeLQQPHfTsl3dIBkP0ElV DCL/JMMnRxaCRxzu+DSF8zg10QJJ53K6MQki0O8RQPsDiV39Tz2+nt1R7PKpTufe FFn8pSuBtj3rbDFIMczFjw5HZqCvl3a+9Bp/YDs2IF4Wv+YRYSLVb0nwfh+ehBrz 4sKzMGANQr35QPupbKc1BJUGy8/+QHsY/iq10xh36cbix/Qn7KIpRfsybhgLILh/ VJmT8M2fA7i2jEuQfnMUlQ7BOmtsGd+b1LFZqZ2UrXUyfcwLKOdIh2B6D4SDLBvQ 9CohhhTsIlxN2bGjUb25QEu0ipa8DNZYWkVZB1DEoWhC3f5WQjkoe6+D3L+Jz7rE Apfk6D5lj/sCUIZd+JyTghMRp1ZWzeDHV8umzDlTUl+YKkqtQ5udsGal288lAJen T3+0Kvm9rpbIZckoQQ/we2rtvNH7UiOZh5ldgVJ11tHNdRoCo2qanpQYB5QDCTPD gFpD+KHxZqcjRKVkZWMNfo1tdTJu81y6w2WiQ+W7QXnfo0OdYFTqBIDjTF9uDumA sLTpaaMrYaCrEcbTrAw= =eAYF -----END PGP SIGNATURE----- Merge tag 'mmc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Support zero-out using TRIM for eMMC - Allow to override the busy-timeout for the ioctl-cmds MMC host: - Continued the conversion of DT bindings into the JSON schema - jz4740: Apply DMA engine limits to maximum segment size - mmci_stm32: Use a buffer for unaligned DMA requests - mmc_spi: Enabled high-speed modes via parsing of DT - omap: Make clock management to be compliant with CCF - renesas_sdhi: - Support eMMC HS400 mode for R-Car V3H ES2.0 - Don't allow support for eMMC HS400 for R-Car V3M/D3 - sdhci_am654: Fix problem when SD card slot lacks the card detect line - sdhci-esdhc-imx: Add support for the imx8dxl variant - sdhci-brcmstb: Enable support for clock gating to save power - sdhci-msm: - Add support for the sdx65 variant - Add support for the sm8150 variant - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant - sdhci-pci-gli: Add workaround to allow GL9755 to enter ASPM L1.2" * tag 'mmc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: sdhci-of-arasan: Add NULL check for data field mmc: core: Support zeroout using TRIM for eMMC mmc: sdhci-brcmstb: Fix compiler warning mmc: sdhci-msm: Add compatible string check for sdx65 dt-bindings: mmc: sdhci-msm: Document the SDX65 compatible mmc: sdhci-msm: Add compatible string check for sm8150 dt-bindings: mmc: sdhci-msm: Add compatible string for sm8150 mmc: sdhci-msm: Add SoC specific compatibles dt-bindings: mmc: sdhci-msm: Convert bindings to yaml dt-bindings: mmc: brcm,sdhci-brcmstb: cleanup example dt-bindings: mmc: brcm,sdhci-brcmstb: correct number of reg entries mmc: sdhci-brcmstb: Enable Clock Gating to save power mmc: sdhci-brcmstb: Re-organize flags mmc: mmci: Remove custom ios handler mmc: atmel-mci: Simplify if(chan) and if(!chan) mmc: core: use kobj_to_dev() dt-bindings: mmc: sdhci-of-dwcmhsc: Add rk3588 mmc: core: Add CIDs for cards to the entropy pool mmc: core: Allows to override the timeout value for ioctl() path mmc: sdhci-omap: Use of_device_get_match_data() helper ...	2022-05-24 14:56:38 -07:00
Bjorn Helgaas	ba3527d8ff	Merge branch 'pci/host/qcom' ... - Add SM8150 SoC DT binding and support (Bhupesh Sharma) - Fix pipe clock imbalance (Johan Hovold) - Fix runtime PM imbalance on probe errors (Johan Hovold) - Fix PHY init imbalance on probe errors (Johan Hovold) - Convert DT binding to YAML (Dmitry Baryshkov) - Update DT binding to show that resets aren't required for MSM8996/APQ8096 platforms (Dmitry Baryshkov) - Add explicit register names per chipset in DT binding (Dmitry Baryshkov) - Add sc7280-specific clock and reset definitions to DT binding (Dmitry Baryshkov) * pci/host/qcom: dt-bindings: PCI: qcom: Add schema for sc7280 chipset dt-bindings: PCI: qcom: Specify reg-names explicitly dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms dt-bindings: PCI: qcom: Convert to YAML PCI: qcom: Fix unbalanced PHY init on probe errors PCI: qcom: Fix runtime PM imbalance on probe errors PCI: qcom: Fix pipe clock imbalance PCI: qcom: Add SM8150 SoC support dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC	2022-05-24 16:42:26 -05:00
Bjorn Helgaas	8d8270069c	Merge branch 'remotes/lorenzo/pci/layerscape' ... - Add a "big-endian" DT property to indicate that the PEX_LUT and PF register blocks are implemented in big-endian (Hou Zhiqiang) - Add EP mode compatible strings for ls1028a (Xiaowei Bao) - Define DT properties for AER/PME interrupts (Li Yang) * remotes/lorenzo/pci/layerscape: dt-bindings: pci: layerscape-pci: define AER/PME interrupts dt-bindings: pci: layerscape-pci: Add EP mode compatible strings for ls1028a dt-bindings: pci: layerscape-pci: Update the description of SCFG property dt-bindings: pci: layerscape-pci: Add a optional property big-endian	2022-05-24 16:42:24 -05:00
Dmitry Baryshkov	3f467d122f	dt-bindings: PCI: qcom: Add schema for sc7280 chipset ... Add support for sc7280-specific clock and reset definitions. Link: https://lore.kernel.org/r/20220506152107.1527552-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org>	2022-05-24 16:41:55 -05:00
Dmitry Baryshkov	c6523c4a30	dt-bindings: PCI: qcom: Specify reg-names explicitly ... Instead of specifying the enum of possible reg-names, specify them explicitly. This allows us to specify which chipsets need the "atu" regions and which do not. Also it clearly describes which platforms enumerate PCIe cores using the dbi region and which use parf region for that. Link: https://lore.kernel.org/r/20220506152107.1527552-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org>	2022-05-24 16:41:38 -05:00
Dmitry Baryshkov	6700a9b00f	dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms ... On MSM8996/APQ8096 platforms the PCIe controller doesn't have any resets. So move the requirement stanza under the corresponding if condition. Link: https://lore.kernel.org/r/20220506152107.1527552-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org>	2022-05-24 16:41:10 -05:00
Dmitry Baryshkov	075a9d5593	dt-bindings: PCI: qcom: Convert to YAML ... Changes to the schema: - Fixed the ordering of clock-names/reset-names according to the dtsi files. - Mark vdda-supply as required only for apq/ipq8064 (as it was marked as generally required in the txt file). Changes to examples: - Inline clock and reset numbers rather than including dt-bindings files because of conflicts between the headers - Split ranges and reg properties to follow current practice - Change -gpio to -gpios - Update IRQ flags to LEVEL_HIGH rater than NONE - Removed extra "snps,dw-pcie" compatibility. Note: while it was not clearly described in text schema, the majority of Qualcomm platforms follow the snps,dw-pcie schema and use two compatibility strings in the DT files: platform-specific one and a fallback to the generic snps,dw-pcie one. However the platform itself is not compatible with the snps,dw-pcie interface, so we are going to remove it. Link: https://lore.kernel.org/r/20220506152107.1527552-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org>	2022-05-24 16:41:10 -05:00
Bhupesh Sharma	a6e25b39ad	dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC ... Document the PCIe DT bindings for SM8150 SoC. The PCIe IP is similar to the one used on SM8250. Link: https://lore.kernel.org/r/20220326060810.1797516-2-bhupesh.sharma@linaro.org Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>	2022-05-24 16:35:50 -05:00
Linus Torvalds	d335371940	MTD core changes: ... * Call of_platform_populate() for MTD partitions * Check devicetree alias for index * mtdoops: - Add a timestamp to the mtdoops header. - Create a header structure for the saved mtdoops. - Fix the size of the header read buffer. * mtdblock: Warn if opened on NAND * Bindings: - reserved-memory: Support MTD/block device - jedec,spi-nor: remove unneeded properties - Extend fixed-partitions binding - Add Sercomm (Suzhou) Corporation vendor prefix MTD driver changes: * st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove() * phram: - Allow cached mappings - Allow probing via reserved-memory * maps: ixp4xx: Drop driver * bcm47xxpart: Print correct offset on read error CFI driver changes: * Rename chip_ready variables * Add S29GL064N ID definition * Use chip_ready() for write on S29GL064N * Move and rename chip_check/chip_ready/chip_good_for_write NAND core changes: * Print offset instead of page number for bad blocks Raw NAND controller drivers: * Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe() * CS553X: simplify the return expression of cs553x_write_ctrl_byte() * Davinci: Remove redundant unsigned comparison to zero * Denali: Use managed device resources * GPMI: - Add large oob bch setting support - Rename the variable ecc_chunk_size - Uninline the gpmi_check_ecc function - Add strict ecc strength check - Refactor BCH geometry settings function * Intel: Fix possible null-ptr-deref in ebu_nand_probe() * MPC5121: Check before clk_disable_unprepare() not needed * Mtk: - MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK - Also parse the default nand-ecc-engine property if available - Make mtk_ecc.c a separated module * OMAP ELM: - Convert the bindings to yaml - Describe the bindings for AM64 ELM - Add support for its compatible * Renesas: Use runtime PM instead of the raw clock API and update the bindings accordingly * Rockchip: Check before clk_disable_unprepare() not needed * TMIO: Check return value after calling platform_get_resource() Raw NAND chip driver: * Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00 SPI-NAND chip drivers: * Gigadevice: - Add support for: - GD5FxGM7xExxG - GD5F{2,4}GQ5xExxG - GD5F1GQ5RExxG - GD5FxGQ4xExxG - Fix Quad IO for GD5F1GQ5UExxG * XTX: Add support for XT26G0xA SPI NOR core changes: * Read back written SR value to make sure the write was done correctly. * Introduce a common function for Read ID that manufacturer drivers can use to verify the Octal DTR switch worked correctly. * Add helpers for read/write any register commands so manufacturer drivers don't open code it every time. * Clarify rdsr dummy cycles documentation. * Add debugfs entry to expose internal flash parameters and state. SPI NOR manufacturer drivers changes: * Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A. * Move spi_nor_write_ear() to Winbond module since only Winbond flashes use it. * Rework Micron and Cypress Octal DTR enable methods to improve readability. * Use the common Read ID function to verify switch to Octal DTR mode for Micron and Cypress flashes. * Skip polling status on volatile register writes for Micron and Cypress flashes since the operation is instant. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmKHhXEACgkQJWrqGEe9 VoQ4FQgAwTWnv7Eps8ngxlOE1WW1Kx+XUFCYN7mUKmDycgRKWWqF0OUu3pU6T3Si XoOixajzsPC7AJtXbbGKUkH3UtqapCZ/OVxMJzY1S1zKVgS72ChvPth+rNOA5H6f wkwCRYBCm51hYAlOQeRoFtwLEpOP17KTZw9Jn/u5RVwbQedQnzPj5sb6PddejjF4 9nlk2auJHzENBEEBG3WLRNgvGep8mNNFarzWB4iWrMcG0w1EgBksbIdshoBmu7vj nKcDJbyA81DqX+8d56BfAFih8H2yCXZmhUzMK+zqnNkd1NuPnDDnrQYFKmKm2hAg 3bIMIzi+8dl/m0TY6BHPHj8oIYpjYA== =P95J -----END PGP SIGNATURE----- Merge tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "MTD core changes: - Call of_platform_populate() for MTD partitions - Check devicetree alias for index - mtdoops: - Add a timestamp to the mtdoops header. - Create a header structure for the saved mtdoops. - Fix the size of the header read buffer. - mtdblock: Warn if opened on NAND - Bindings: - reserved-memory: Support MTD/block device - jedec,spi-nor: remove unneeded properties - Extend fixed-partitions binding - Add Sercomm (Suzhou) Corporation vendor prefix MTD driver changes: - st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove() - phram: - Allow cached mappings - Allow probing via reserved-memory - maps: ixp4xx: Drop driver - bcm47xxpart: Print correct offset on read error CFI driver changes: - Rename chip_ready variables - Add S29GL064N ID definition - Use chip_ready() for write on S29GL064N - Move and rename chip_check/chip_ready/chip_good_for_write NAND core changes: - Print offset instead of page number for bad blocks Raw NAND controller drivers: - Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe() - CS553X: simplify the return expression of cs553x_write_ctrl_byte() - Davinci: Remove redundant unsigned comparison to zero - Denali: Use managed device resources - GPMI: - Add large oob bch setting support - Rename the variable ecc_chunk_size - Uninline the gpmi_check_ecc function - Add strict ecc strength check - Refactor BCH geometry settings function - Intel: Fix possible null-ptr-deref in ebu_nand_probe() - MPC5121: Check before clk_disable_unprepare() not needed - Mtk: - MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK - Also parse the default nand-ecc-engine property if available - Make mtk_ecc.c a separated module - OMAP ELM: - Convert the bindings to yaml - Describe the bindings for AM64 ELM - Add support for its compatible - Renesas: Use runtime PM instead of the raw clock API and update the bindings accordingly - Rockchip: Check before clk_disable_unprepare() not needed - TMIO: Check return value after calling platform_get_resource() Raw NAND chip driver: - Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00 SPI-NAND chip drivers: - Gigadevice: - Add support for: - GD5FxGM7xExxG - GD5F{2,4}GQ5xExxG - GD5F1GQ5RExxG - GD5FxGQ4xExxG - Fix Quad IO for GD5F1GQ5UExxG - XTX: Add support for XT26G0xA SPI NOR core changes: - Read back written SR value to make sure the write was done correctly. - Introduce a common function for Read ID that manufacturer drivers can use to verify the Octal DTR switch worked correctly. - Add helpers for read/write any register commands so manufacturer drivers don't open code it every time. - Clarify rdsr dummy cycles documentation. - Add debugfs entry to expose internal flash parameters and state. SPI NOR manufacturer drivers changes: - Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A. - Move spi_nor_write_ear() to Winbond module since only Winbond flashes use it. - Rework Micron and Cypress Octal DTR enable methods to improve readability. - Use the common Read ID function to verify switch to Octal DTR mode for Micron and Cypress flashes. - Skip polling status on volatile register writes for Micron and Cypress flashes since the operation is instant" * tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (68 commits) mtd: st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove() dt-bindings: mtd: partitions: Extend fixed-partitions binding dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix mtd: phram: Allow cached mappings mtd: call of_platform_populate() for MTD partitions mtd: rawnand: renesas: Use runtime PM instead of the raw clock API dt-bindings: mtd: renesas: Fix the NAND controller description mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not needed mtd: rawnand: rockchip: Check before clk_disable_unprepare() not needed mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte() mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4 mtd: spi-nor: debugfs: fix format specifier mtd: spi-nor: support eon en25qh256a variant mtd: spi-nor: winbond: add support for W25Q512NW-IM mtd: spi-nor: expose internal parameters via debugfs mtd: spi-nor: export spi_nor_hwcaps_pp2cmd() mtd: spi-nor: move spi_nor_write_ear() to winbond module mtd: spi-nor: amend the rdsr dummy cycles documentation mtd: cfi_cmdset_0002: Rename chip_ready variables ...	2022-05-24 14:31:29 -07:00
Linus Torvalds	076f222a69	hwmon updates for v5.19-rc1 ... - New drivers - Driver for the Microchip LAN966x SoC - PMBus driver for Infineon Digital Multi-phase xdp152 family controllers - Chip support added to existing drivers - asus-ec-sensors - Support for ROG STRIX X570-E GAMING WIFI II, PRIME X470-PRO, and ProArt X570 Creator WIFI - External temperature sensor support for ASUS WS X570-ACE - nct6775 - Support for I2C driver - Support for ASUS PRO H410T / PRIME H410M-R / ROG X570-E GAMING WIFI II - lm75 - Support for - Atmel AT30TS74 - pmbus/max16601 - Support for MAX16602 - aquacomputer_d5next - Support for Aquacomputer Farbwerk - Support for Aquacomputer Octo - jc42 - Support for S-34TS04A - Kernel API changes / clarifications - The chip parameter of with_info API is now mandatory - New hwmon_device_register_for_thermal API call for use by the thermal subsystem - Improvements - PMBus and JC42 drivers now register with thermal subsystem - PMBus drivers now support get_voltage/set_voltage power operations - The adt7475 driver now supports pin configuration - The lm90 driver now supports setting extended range temperatures configuration with a devicetree property - The dell-smm driver now registers as cooling device - The OCC driver delays hwmon registration until requested by userspace - Various other minor fixes and improvements -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmKKpskACgkQyx8mb86f mYHmkw/+IsOgkaSwA0PMBSQvPdncDcywchhtJ20UP3aKogy9Lp4HZ9NBRPZKeL7Y r89LSi3OT27yn+NQ7JXGIA7VLnqftoHREkyq3khJDwqRCMv0/bTxEYuO04Hdte1n 4QrLth4yMfG5domgQn/M1KyS40jsMLPLMg0ui/Zwbm6O9J4D/Jj+P8KiT+Txgdmh Zm/a2WQEkqueXENv1XEOgZ4DvKxq236pqn9kLVBQSiI74GAtg08pB5K+HyDIcTph 1nnbW/hJclWX96/Dbw87QNV7tu5xTAfno9xN4rbTYNgafx6gtoJoXWXukA9memi4 NzkFiaOdf+47Pr+EEi7SczVf+P+EwisVt4IMahMLIXZMaStHEJFcodR3PjsVPWt/ 8R6z6r+byNFjfGJDpvGwUm9zJcaiCs/zrylyrOx2UXdzMrD3A6zngsPtWoli37h0 X5vV5MYEVKSE1m4ZEt0rq8O2gc2Jrb2FyVxhEzaDoM5IwviXSNEGIiav6uPaFI/R ehmsWV/qbqRp3lfcvwyei4frITHhpgZQC5eaEiN+LFu1XbBxy7TlSp3UAqL0jHj+ qBZxpFgAz9MmEH1NgfSc8hHdz1cKIo9eR8IdteFg3WexcJ9evFwKiVK8yvlMOlVS CnOhGOTOFHZVASnNQS45Vi9Ofr6Ou2YSss2McyB1eMOYUMC0cxU= =LA2x -----END PGP SIGNATURE----- Merge tag 'hwmon-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - Driver for the Microchip LAN966x SoC - PMBus driver for Infineon Digital Multi-phase xdp152 family controllers Chip support added to existing drivers: - asus-ec-sensors: - Support for ROG STRIX X570-E GAMING WIFI II, PRIME X470-PRO, and ProArt X570 Creator WIFI - External temperature sensor support for ASUS WS X570-ACE - nct6775: - Support for I2C driver - Support for ASUS PRO H410T / PRIME H410M-R / ROG X570-E GAMING WIFI II - lm75: - Support for - Atmel AT30TS74 - pmbus/max16601: - Support for MAX16602 - aquacomputer_d5next: - Support for Aquacomputer Farbwerk - Support for Aquacomputer Octo - jc42: - Support for S-34TS04A Kernel API changes / clarifications: - The chip parameter of with_info API is now mandatory - New hwmon_device_register_for_thermal API call for use by the thermal subsystem Improvements: - PMBus and JC42 drivers now register with thermal subsystem - PMBus drivers now support get_voltage/set_voltage power operations - The adt7475 driver now supports pin configuration - The lm90 driver now supports setting extended range temperatures configuration with a devicetree property - The dell-smm driver now registers as cooling device - The OCC driver delays hwmon registration until requested by userspace ... and various other minor fixes and improvements" * tag 'hwmon-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (71 commits) hwmon: (aquacomputer_d5next) Fix an error handling path in aqc_probe() hwmon: (sl28cpld) Fix typo in comment hwmon: (pmbus) Check PEC support before reading other registers hwmon: (dimmtemp) Fix bitmap handling hwmon: (lm90) enable extended range according to DTS node dt-bindings: hwmon: lm90: add ti,extended-range-enable property dt-bindings: hwmon: lm90: add missing ti,tmp461 hwmon: (ibmaem) Directly use ida_alloc()/free() hwmon: Directly use ida_alloc()/free() hwmon: (asus-ec-sensors) fix Formula VIII definition dt-bindings: trivial-devices: Add xdp152 hwmon: (sl28cpld-hwmon) Use HWMON_CHANNEL_INFO macro hwmon: (pwm-fan) Use HWMON_CHANNEL_INFO macro hwmon: (peci/dimmtemp) Use HWMON_CHANNEL_INFO macro hwmon: (peci/cputemp) Use HWMON_CHANNEL_INFO macro hwmon: (mr75203) Use HWMON_CHANNEL_INFO macro hwmon: (ltc2992) Use HWMON_CHANNEL_INFO macro hwmon: (as370-hwmon) Use HWMON_CHANNEL_INFO macro hwmon: Make chip parameter for with_info API mandatory thermal/drivers/thermal_hwmon: Use hwmon_device_register_for_thermal() ...	2022-05-24 14:23:10 -07:00
Linus Torvalds	143a6252e1	arm64 updates for 5.19: ... - Initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. No KVM support yet, SME is disabled in guests. - Support for crashkernel reservations above ZONE_DMA via the 'crashkernel=X,high' command line option. - btrfs search_ioctl() fix for live-lock with sub-page faults. - arm64 perf updates: support for the Hisilicon "CPA" PMU for monitoring coherent I/O traffic, support for Arm's CMN-650 and CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup. - Kselftest updates for SME, BTI, MTE. - Automatic generation of the system register macros from a 'sysreg' file describing the register bitfields. - Update the type of the function argument holding the ESR_ELx register value to unsigned long to match the architecture register size (originally 32-bit but extended since ARMv8.0). - stacktrace cleanups. - ftrace cleanups. - Miscellaneous updates, most notably: arm64-specific huge_ptep_get(), avoid executable mappings in kexec/hibernate code, drop TLB flushing from get_clear_flush() (and rename it to get_clear_contig()), ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmKH19IACgkQa9axLQDI XvEFWg//bf0p6zjeNaOJmBbyVFsXsVyYiEaLUpFPUs3oB+81s2YZ+9i1rgMrNCft EIDQ9+/HgScKxJxnzWf68heMdcBDbk76VJtLALExbge6owFsjByQDyfb/b3v/bLd ezAcGzc6G5/FlI1IP7ct4Z9MnQry4v5AG8lMNAHjnf6GlBS/tYNAqpmj8HpQfgRQ ZbhfZ8Ayu3TRSLWL39NHVevpmxQm/bGcpP3Q9TtjUqg0r1FQ5sK/LCqOksueIAzT UOgUVYWSFwTpLEqbYitVqgERQp9LiLoK5RmNYCIEydfGM7+qmgoxofSq5e2hQtH2 SZM1XilzsZctRbBbhMit1qDBqMlr/XAy/R5FO0GauETVKTaBhgtj6mZGyeC9nU/+ RGDljaArbrOzRwMtSuXF+Fp6uVo5spyRn1m8UT/k19lUTdrV9z6EX5Fzuc4Mnhed oz4iokbl/n8pDObXKauQspPA46QpxUYhrAs10B/ELc3yyp/Qj3jOfzYHKDNFCUOq HC9mU+YiO9g2TbYgCrrFM6Dah2E8fU6/cR0ZPMeMgWK4tKa+6JMEINYEwak9e7M+ 8lZnvu3ntxiJLN+PrPkiPyG+XBh2sux1UfvNQ+nw4Oi9xaydeX7PCbQVWmzTFmHD q7UPQ8220e2JNCha9pULS8cxDLxiSksce06DQrGXwnHc1Ir7T04= =0DjE -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. No KVM support yet, SME is disabled in guests. - Support for crashkernel reservations above ZONE_DMA via the 'crashkernel=X,high' command line option. - btrfs search_ioctl() fix for live-lock with sub-page faults. - arm64 perf updates: support for the Hisilicon "CPA" PMU for monitoring coherent I/O traffic, support for Arm's CMN-650 and CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup. - Kselftest updates for SME, BTI, MTE. - Automatic generation of the system register macros from a 'sysreg' file describing the register bitfields. - Update the type of the function argument holding the ESR_ELx register value to unsigned long to match the architecture register size (originally 32-bit but extended since ARMv8.0). - stacktrace cleanups. - ftrace cleanups. - Miscellaneous updates, most notably: arm64-specific huge_ptep_get(), avoid executable mappings in kexec/hibernate code, drop TLB flushing from get_clear_flush() (and rename it to get_clear_contig()), ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits) arm64/sysreg: Generate definitions for FAR_ELx arm64/sysreg: Generate definitions for DACR32_EL2 arm64/sysreg: Generate definitions for CSSELR_EL1 arm64/sysreg: Generate definitions for CPACR_ELx arm64/sysreg: Generate definitions for CONTEXTIDR_ELx arm64/sysreg: Generate definitions for CLIDR_EL1 arm64/sve: Move sve_free() into SVE code section arm64: Kconfig.platforms: Add comments arm64: Kconfig: Fix indentation and add comments arm64: mm: avoid writable executable mappings in kexec/hibernate code arm64: lds: move special code sections out of kernel exec segment arm64/hugetlb: Implement arm64 specific huge_ptep_get() arm64/hugetlb: Use ptep_get() to get the pte value of a huge page arm64: kdump: Do not allocate crash low memory if not needed arm64/sve: Generate ZCR definitions arm64/sme: Generate defintions for SVCR arm64/sme: Generate SMPRI_EL1 definitions arm64/sme: Automatically generate SMPRIMAP_EL2 definitions arm64/sme: Automatically generate SMIDR_EL1 defines arm64/sme: Automatically generate defines for SMCR ...	2022-05-23 21:06:11 -07:00
Linus Torvalds	0be3ff0ccb	- Switch ghes_edac to use the CPER error reporting routines and simplify ... the code considerably this way - Rip out the silly edac_align_ptr() contraption which was computing the size of the private structures of each driver and thus allowing for a one-shot memory allocation. This was clearly unnecessary and confusing so switch to simple and boring kmalloc* calls. - Last but not least, the usual garden variety of fixes, cleanups and improvements all over EDAC land -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmKLRJkACgkQEsHwGGHe VUorYQ//a3s/j1wIXB5J0q7c9xlumqhxJz9P2A42kZMEW6MR94Ovr2lDnN6FRN5z dlLLn/fxjh3El084jaKrfhHHyB0Z78Qte/Caf4E3HVuhmZ2dQw58vXAm3TNMsiPz DEnJrRJ/vuX/VEcuuvX9wwSovPqNINW4lb9cWcIfGPToX051coUvuxTQXmCO80Hd 2syv88S0a8tw94E6DeB+5hhAQdgdV2dK3rZChTNi1guDqHqv14E6oQowWe6+Dvq/ XGBbJtmjuWsh2ZtS1KDnGYO0jvzLxe/5kjdgXYUoftG30MVTkVV0pBk0G+lPQQBN 2nSLd9zEgSceB5SlNlfWtQQuL1I56q3chxT7mj5JBPRsqQmV6Rxg9E0jnyiUH6Cf Q9btDizjU7vUpDKe1Y8fJEMR3nXTIK58AnjcDmTZIu5hVZFY2nYnql0txClmkTUE Bffud97C7a8uiSECp6oS5vjQHK12xwqiD8KRIaAHlBDYnpqTOJw/mDoKUvV74yiJ TRvvPAiPgoA5ZLLkCFKxA7IzFXtgz9HL7m/MbbBo63ed187qvMyBxcyb8Teih/iy u6eK0W1fux+zEaS6q5Jp0v415aqVvoa0UHgImTlOJhBaWENlEQixHslFMaqnlDTV yhG405KxxMgW9/L9nI4kqP827zIr4iXJCVg3rJsOdytEzfwWy2o= =Hwmn -----END PGP SIGNATURE----- Merge tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - Switch ghes_edac to use the CPER error reporting routines and simplify the code considerably this way - Rip out the silly edac_align_ptr() contraption which was computing the size of the private structures of each driver and thus allowing for a one-shot memory allocation. This was clearly unnecessary and confusing so switch to simple and boring kmalloc* calls. - Last but not least, the usual garden variety of fixes, cleanups and improvements all over EDAC land * tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/xgene: Fix typo processsors -> processors EDAC/i5100: Remove unused inline function i5100_nrecmema_dm_buf_id() EDAC: Use kcalloc() EDAC/ghes: Change ghes_hw from global to static EDAC/armada_xp: Use devm_platform_ioremap_resource() EDAC/synopsys: Add a SPDX identifier EDAC/synopsys: Add driver support for i.MX platforms EDAC/dmc520: Don't print an error for each unconfigured interrupt line EDAC/mc: Get rid of edac_align_ptr() EDAC/device: Sanitize edac_device_alloc_ctl_info() definition EDAC/device: Get rid of the silly one-shot memory allocation in edac_device_alloc_ctl_info() EDAC/pci: Get rid of the silly one-shot memory allocation in edac_pci_alloc_ctl_info() EDAC/mc: Get rid of silly one-shot struct allocation in edac_mc_alloc() efi/cper: Reformat CPER memory error location to more readable EDAC/ghes: Unify CPER memory error location reporting efi/cper: Add a cper_mem_err_status_str() to decode error description powerpc/85xx: Remove fsl,85... bindings	2022-05-23 17:34:20 -07:00
Linus Torvalds	fcfde8a7cf	Updates for interrupt core and drivers: ... Core code: - Make the managed interrupts more robust by shutting them down in the core code when the assigned affinity mask does not contain online CPUs. - Make the irq simulator chip work on RT - A small set of cpumask and power manageent cleanups Drivers: - A set of changes which mark GPIO interrupt chips immutable to prevent the GPIO subsystem from modifying it under the hood. This provides the necessary infrastructure and converts a set of GPIO and pinctrl drivers over. - A set of changes to make the pseudo-NMI handling for GICv3 more robust: a missing barrier and consistent handling of the priority mask. - Another set of GICv3 improvements and fixes, but nothing outstanding - The usual set of improvements and cleanups all over the place - No new irqchip drivers and not even a new device tree binding! 100+ interrupt chips are truly enough. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmKLOEoTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoQ4ED/9B1kDwunvkNAPJDmSmr4hFU7EU3ZLb SyS2099PWekgU3TaWdD6eILm9hIvsAmmhbU7CJ0EWol6G5VsqbNoYsfOsWliuGTi CL3ygZL84hL4b24c3sipqWAF60WCEKLnYV7pb1DgiZM41C87+wxPB49FQbHVjroz WDRTF8QYWMqoTRvxGMCflDfkAwydlCrqzQwgyUB5hJj3vbiYX9dVMAkJmHRyM3Uq Prwhx1Ipbj/wBSReIbIXlNx4XI/iUDI0UWeh02XkVxLb5Jzg7vPCHiuyVMR1DW2J oEjAR+/1sGwVOoRnfRlwdRUmRRItdlbopbL4CuhO/ENrM/r/o/rMvDDMwF4WoMW9 zXvzFBLllVpLvyFvVHO1LKI6Hx2mdyAmQ1M/TxMFOmHAyfOPtN150AJDPKdCrMk/ 0F0B0y/KPgU9P/Q9yLh2UiXRAkoUBpLpk20xZbAUGHnjXXkys4Z2fE+THIob+Ibe pUnXsgCXVVWyqJjdikPF2gqsSsCFUo7iblHRzI0hzOAPe3MTph0qh3hZoFAFNEYP IIyAv9+IiT1EvBMgjHNmZ51U0uTbt3qWOSxebEoU3a598wwEVNRRVyutqvREXhl8 inkzpL2N3uBPX7sA25lYkH4QKRbzVoNkF/s0e/J9WZdYbj3SsxGouoGdYA2xgvtM 8tiCnFC9hfzepQ== =xcXv -----END PGP SIGNATURE----- Merge tag 'irq-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt handling updates from Thomas Gleixner: "Core code: - Make the managed interrupts more robust by shutting them down in the core code when the assigned affinity mask does not contain online CPUs. - Make the irq simulator chip work on RT - A small set of cpumask and power manageent cleanups Drivers: - A set of changes which mark GPIO interrupt chips immutable to prevent the GPIO subsystem from modifying it under the hood. This provides the necessary infrastructure and converts a set of GPIO and pinctrl drivers over. - A set of changes to make the pseudo-NMI handling for GICv3 more robust: a missing barrier and consistent handling of the priority mask. - Another set of GICv3 improvements and fixes, but nothing outstanding - The usual set of improvements and cleanups all over the place - No new irqchip drivers and not even a new device tree binding! 100+ interrupt chips are truly enough" * tag 'irq-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) irqchip: Add Kconfig symbols for sunxi drivers irqchip/gic-v3: Fix priority mask handling irqchip/gic-v3: Refactor ISB + EOIR at ack time irqchip/gic-v3: Ensure pseudo-NMIs have an ISB between ack and handling genirq/irq_sim: Make the irq_work always run in hard irq context irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, A38x, A39x irqchip/gic: Improved warning about incorrect type irqchip/csky: Return true/false (not 1/0) from bool functions irqchip/imx-irqsteer: Add runtime PM support irqchip/imx-irqsteer: Constify irq_chip struct irqchip/armada-370-xp: Enable MSI affinity configuration irqchip/aspeed-scu-ic: Fix irq_of_parse_and_map() return value irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value irqchip/sun6i-r: Use NULL for chip_data irqchip/xtensa-mx: Fix initial IRQ affinity in non-SMP setup irqchip/exiu: Fix acknowledgment of edge triggered interrupts irqchip/gic-v3: Claim iomem resources dt-bindings: interrupt-controller: arm,gic-v3: Make the v2 compat requirements explicit irqchip/gic-v3: Relax polling of GIC{R,D}_CTLR.RWP irqchip/gic-v3: Detect LPI invalidation MMIO registers ...	2022-05-23 16:58:49 -07:00
Linus Torvalds	8a32f81a89	ata changes for 5.19-rc1 ... For this cycle, the libata.force kernel parameter changes stand out. Beside that, some small cleanups in various drivers. In more details: * Changes to the pata_mpc52xx driver in preparation for powerpc's asm/prom.h cleanup, from Christophe. * Improved ATA command allocation, from John. * Various small cleanups to the pata_via, pata_sil680, pata_ftide010, sata_gemini, ahci_brcm drivers and to libata-core, from Sergey, Diego, Ruyi, Mighao and Jiabing. * Add support for the RZ/G2H SoC to the rcar-sata driver, from Lad. * AHCI RAID ID cleanup, from Dan. * Improvement to the libata.force kernel parameter to allow most horkage flags to be manually forced for debugging drive issues in the field without needing recompiling a kernel, from me. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYosMtQAKCRDdoc3SxdoY dhi6APsGXkkiaTheBeshjhPZiet80iEh4gJknp5QwgJ6QovjDwEAzjApUC0S1sq2 atD4Y7T6HnKQBp66lJHvvgbFuHlxMgg= =YuEq -----END PGP SIGNATURE----- Merge tag 'ata-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata updates from Damien Le Moal: "For this cycle, the libata.force kernel parameter changes stand out. Beside that, some small cleanups in various drivers. In more detail: - Changes to the pata_mpc52xx driver in preparation for powerpc's asm/prom.h cleanup, from Christophe. - Improved ATA command allocation, from John. - Various small cleanups to the pata_via, pata_sil680, pata_ftide010, sata_gemini, ahci_brcm drivers and to libata-core, from Sergey, Diego, Ruyi, Mighao and Jiabing. - Add support for the RZ/G2H SoC to the rcar-sata driver, from Lad. - AHCI RAID ID cleanup, from Dan. - Improvement to the libata.force kernel parameter to allow most horkage flags to be manually forced for debugging drive issues in the field without needing recompiling a kernel, from me" * tag 'ata-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_ftide010: Remove unneeded ERROR check before clk_disable_unprepare doc: admin-guide: Update libata kernel parameters ata: libata-core: Allow forcing most horkage flags ata: libata-core: Improve link flags forced settings ata: libata-core: Refactor force_tbl definition ata: libata-core: cleanup ata_device_blacklist ata: simplify the return expression of brcm_ahci_remove ata: Make use of the helper function devm_platform_ioremap_resource() ata: libata-core: replace "its" with "it is" ahci: Add a generic 'controller2' RAID id dt-bindings: ata: renesas,rcar-sata: Add r8a774e1 support ata: pata_via: fix sloppy typing in via_do_set_mode() ata: pata_sil680: fix result type of sil680_sel{dev|reg}() ata: libata-core: fix parameter type in ata_xfer_mode2shift() libata: Improve ATA queued command allocation ata: pata_mpc52xx: Prepare cleanup of powerpc's asm/prom.h	2022-05-23 14:14:50 -07:00
Rob Herring	4e71ed9853	dt-bindings: Fix properties without any type ... Now that the schema tools can extract type information for all properties (in order to decode dtb files), finding properties missing any type definition is fairly trivial though not yet automated. Fix the various property schemas which are missing a type. Most of these tend to be device specific properties which don't have a vendor prefix. A vendor prefix is how we normally ensure a type is defined. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> # for everything in .../bindings/display/ Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20220519211411.2200720-1-robh@kernel.org	2022-05-23 11:53:30 -05:00
Rob Herring	028818e374	Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example" ... This reverts commit b20eee62ee. The example has just been removed altogether in the mailbox tree. Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>	2022-05-23 11:00:58 -05:00
Stephen Boyd	f93afd8e75	dt-bindings: cros-ec: Fix a typo in description ... A 's/pf/of/' on rpmsg-name description. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220512013921.164637-2-swboyd@chromium.org	2022-05-23 16:11:31 +01:00
Krzysztof Kozlowski	21a486c4a9	dt-bindings: mfd: wlf,arizona: Add spi-max-frequency ... The Wolfson Microelectronics Arizona audio can be connected via SPI bus (e.g. WM5110 on Exynos5433 TM2 board), so allow SPI peripheral properties. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220504084304.46173-1-krzysztof.kozlowski@linaro.org	2022-05-23 15:13:26 +01:00
Takashi Iwai	0163717ed5	ASoC: Updates for v5.19 ... This is quite a big update, partly due to the addition of some larger drivers (more of which is to follow since at least the AVS driver is still a work in progress) and partly due to Charles' work sorting out our handling of endianness. As has been the case recently it's much more about drivers than the core. - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs. - Initial stages of Intel AVS driver merge. - Introduction of v4 IPC mechanism for SOF. - TDM mode support for AK4613. - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780 -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKLf5EACgkQJNaLcl1U h9ASqAf/YnwbFP919ree/DEKUDCNc4klUH5M4JOexXbZlZDqxKYRGZjoLuiwX/PQ Au/xOjGEvm3Yg5/g5c8YFVNcIkv1O8VclRkV59oIxlBwKmQeTKvq+lOmlel2l1wZ XOmvHjE46wxH1N1cLwL6KkX0YDn59orSZGYZRpfLjL61y6LQWsLNU0tY6AWCRATB Llnrbu+DYgCsYNTEOOOY5s4V+4LkQm8TLdft91Va7mBdkPPRFoXRO0HGcVBqbkoN 7pf2mrjrLAWL9yuA8FlrgJbHq58DF9WGe5uEU7qlVL1zw46ClgIM0ABxPOdNdjV2 Wzb1jI7GmztgQNxlR9BcJB0kxAj9vA== =oD5l -----END PGP SIGNATURE----- Merge tag 'asoc-v5.19' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.19 This is quite a big update, partly due to the addition of some larger drivers (more of which is to follow since at least the AVS driver is still a work in progress) and partly due to Charles' work sorting out our handling of endianness. As has been the case recently it's much more about drivers than the core. - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs. - Initial stages of Intel AVS driver merge. - Introduction of v4 IPC mechanism for SOF. - TDM mode support for AK4613. - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780	2022-05-23 16:03:04 +02:00
Nobuhiro Iwamatsu	17155d5db7	dt-bindings: net: toshiba,visconti-dwmac: Update the common clock properties ... The clock for this driver switched to the common clock controller driver. Therefore, update common clock properties for ethernet device in the binding document. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>	2022-05-22 23:08:18 +01:00
Lorenzo Bianconi	4b139b75cc	dt-bindings: net: mediatek,net: add mt7986-eth binding ... Introduce dts bindings for mt7986 soc in mediatek,net.yaml. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>	2022-05-22 22:24:32 +01:00
Holger Brunck	8dd248fa00	dt-bindings: hwmon: lm90: add ti,extended-range-enable property ... Some devices can operate in an extended temperature mode. Therefore add a boolean ti,extended-range-enable to be able to select this feature in the device tree node. Also make sure that this feature can only be enabled for the devices supporting this feature. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220517135614.8185-1-holger.brunck@hitachienergy.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>	2022-05-22 11:32:32 -07:00
Holger Brunck	67f6abceab	dt-bindings: hwmon: lm90: add missing ti,tmp461 ... This sensor is already supported from the driver, but is missing in the list of compatible devices in the yaml file. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220517075626.16809-1-holger.brunck@hitachienergy.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>	2022-05-22 11:32:32 -07:00
Greg.Schwendimann@infineon.com	3a3aad6862	dt-bindings: trivial-devices: Add xdp152 ... Add Infineon Digital Multi-phase xdp152 family controllers. Signed-off-by: Greg Schwendimann <Greg.Schwendimann@infineon.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/1a600fd51db942389a5078a72c3bf411@infineon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>	2022-05-22 11:32:32 -07:00
Zev Weiss	801549da5d	dt-bindings: hwmon: Add nuvoton,nct6775 ... These Super I/O chips have an i2c interface that some systems expose to a BMC; the BMC's device tree can now describe that via this binding. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220428012707.24921-2-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>	2022-05-22 11:32:31 -07:00
Chris Packham	4fc1b11362	dt-bindings: hwmon: Document adt7475 pin-function properties ... The adt7473, adt7475, adt7476 and adt7490 have pins that can be used for different functions. Add bindings so that it is possible to describe what pin functions are intended by the hardware design. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20220323034056.260455-2-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>	2022-05-22 11:32:31 -07:00
Michael Walle	ede7e1c20b	dt-bindings: hwmon: add Microchip LAN966x bindings ... Add a binding for the temperature sensor and the fan controller on the Microchip LAN966x family. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20220401214032.3738095-4-michael@walle.cc Signed-off-by: Guenter Roeck <linux@roeck-us.net>	2022-05-22 11:32:30 -07:00
Christophe Leroy	dc21ed2aef	powerpc/85xx: Remove FSL_85XX_CACHE_SRAM ... CONFIG_FSL_85XX_CACHE_SRAM is an option that is not user selectable and which is not selected by any driver nor any defconfig. Remove it and all associated code. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9949813a6b758903b7bee910f798ba2ca82ff8ee.1648720908.git.christophe.leroy@csgroup.eu	2022-05-22 15:58:30 +10:00
Linus Torvalds	4c493b1a41	Input updates for v5.18-rc7 ... - fix reset timing of Ilitek touchscreens - update maintainer entry of DT binding of Mediatek 6779 keypad -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCYolIugAKCRBAj56VGEWX nL6pAQDuLus7t4GLJrg63DS3RXpPII3f1IHMq5lNluqfek9BogEA27Ze2+7pbwMb iwqrj1UuMTobD2YPbuuxJtiDW2ADOQw= =e4+T -----END PGP SIGNATURE----- Merge tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A small fixup to ili210x touchscreen driver, and updated maintainer entry for the device tree binding of Mediatek 6779 keypad: - fix reset timing of Ilitek touchscreens - update maintainer entry of DT binding of Mediatek 6779 keypad" * tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ili210x - use one common reset implementation Input: ili210x - fix reset timing dt-bindings: input: mediatek,mt6779-keypad: update maintainer	2022-05-21 13:58:43 -10:00
Fabien Dessenne	9accf46b7f	dt-bindings: mailbox: remove the IPCC "wakeup" IRQ ... The stm32 ipcc mailbox driver supports only two interrupts (rx and tx), so remove the unsupported "wakeup" one. Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>	2022-05-21 11:41:30 -05:00
Tinghan Shen	dea27cda46	dt-bindings: mailbox: mtk,adsp-mbox: add mt8186 compatible name ... Add compatible name for MediaTek MT8186 SoC ADSP mailbox. Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>	2022-05-21 11:41:30 -05:00
Kartik	58919326e7	dt-bindings: tegra186-hsp: add type for shared mailboxes ... Tegra234 supports sending/receiving 32-bit and 128-bit data over a shared mailbox. Based on the data size to be used, clients need to specify the type of shared mailbox in the device tree. Add a macro for 128-bit shared mailbox. Mailbox clients can use this macro as a flag in device tree to enable 128-bit data support for a shared mailbox. Signed-off-by: Kartik <kkartik@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>	2022-05-21 11:41:30 -05:00
Krzysztof Kozlowski	cd285535b8	dt-bindings: mailbox: qcom-ipcc: simplify the example ... Consumer examples in the bindings of resource providers are trivial, useless and duplicating code. Additionally the incomplete qcom,smp2p example triggers DT schema warnings. Cleanup the example by removing the consumer part and fixing the indentation to DT schema convention. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>	2022-05-21 11:41:29 -05:00
Geert Uytterhoeven	9215a90dd5	dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4 ... Despite the name, R-Car V3U is the first member of the R-Car Gen4 family. Hence move its compatible value to the R-Car Gen4 section. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/2882a6de3905a57ae62d91060d27521af43c4068.1651497024.git.geert+renesas@glider.be Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>	2022-05-21 10:09:31 +02:00
Jean-Jacques Hiblot	9dc731bbb4	dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1 ... Describe the WDT hardware in the RZ/N1 series. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220427135531.708279-2-jjhiblot@traphandler.com [groeck: Rebased, fixed conflicts] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>	2022-05-21 10:09:30 +02:00
Andrej Picej	382256b219	dt-bindings: watchdog: da9062: add watchdog timeout mode ... Document the watchdog timeout mode property. If this property is used the user can select what happens on watchdog timeout. Set this property to 1 to enable SHUTDOWN (the device resets), set it to 0 and the device will go to POWERDOWN on watchdog timeout. If this property is not set, don't touch the WATCHDOG_SD bit and leave the configuration to OTP. This way backward compatibility is not broken. Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211206064732.280375-4-andrej.picej@norik.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>	2022-05-21 10:09:29 +02:00
Biju Das	af84a5a753	dt-bindings: watchdog: renesas,wdt: Document RZ/G2UL SoC ... Document RZ/G2UL WDT bindings. RZ/G2UL WDT is similar to one found on the RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,rzg2l-wdt" will be used as a fallback. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220424071323.151757-1-biju.das.jz@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>	2022-05-21 10:09:28 +02:00
Bjorn Andersson	26d14b9fc3	dt-bindings: watchdog: Add SC8180X and SC8280XP compatibles ... Add compatibles for the SC8180X and SC8280XP platforms to the Qualcomm watchdog binding. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220408212854.581481-1-bjorn.andersson@linaro.org [groeck: Rebased and resolved conflicts] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>	2022-05-21 10:09:27 +02:00
Kunihiko Hayashi	95d0eee971	dt-bindings: watchdog: uniphier: Use unevaluatedProperties ... This refers common bindings, so this is preferred for unevaluatedProperties instead of additionalProperties. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1649317606-21267-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>	2022-05-21 10:07:32 +02:00
Primoz Fiser	b1912875a5	dt-bindings: mfd: da9063: watchdog: add suspend disable option ... Document the watchdog disable option which can be used if the hardware automatic suspend option is broken. Based on commit c514430c51 ("dt-bindings: watchdog: da9062: add suspend disable option"). Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Adam Thomson <DLG-Adam.Thomson.Opensource@dm.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220422072713.3172345-1-primoz.fiser@norik.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>	2022-05-21 10:07:30 +02:00
Gabriel Fernandez	722dc8a1d5	dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC ... New compatible to manage clock and reset of STM32MP13 SoC. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-2-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-05-20 21:07:48 -07:00
Arnd Bergmann	b2441b3bdc	h8300: remove stale bindings and symlink ... These four files are left over from the h8300 removal. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2022-05-20 22:40:56 +02:00