Add riscv-specific USDT argument specification parsing logic.
riscv USDT argument format is shown below:
- Memory dereference case:
"size@off(reg)", e.g. "-8@-88(s0)"
- Constant value case:
"size@val", e.g. "4@5"
- Register read case:
"size@reg", e.g. "-8@a1"
s8 will be marked as poison while it's a reg of riscv, we need
to alias it in advance. Both RV32 and RV64 have been tested.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220419145238.482134-3-pulehui@huawei.com
The usdt_cookie is defined as __u64, which should not be
used as a long type because it will be cast to 32 bits
in 32-bit platforms.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220419145238.482134-2-pulehui@huawei.com
Parsing of USDT arguments is architecture-specific. On aarch64 it is
relatively easy since registers used are x[0-31] and sp. Format is
slightly different compared to x86_64. Possible forms are:
- "size@[reg[,offset]]" for dereferences, e.g. "-8@[sp,76]" and "-4@[sp]";
- "size@reg" for register values, e.g. "-4@x0";
- "size@value" for raw values, e.g. "-8@1".
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1649690496-1902-2-git-send-email-alan.maguire@oracle.com
Coverity static analyzer complains that strcpy() can cause buffer
overflow. Use libbpf_strlcpy() instead to be 100% sure this doesn't
happen.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220407230446.3980075-1-andrii@kernel.org
The logic is superficially similar to that of x86, but the small
differences (no need for register table and dynamic allocation of
register names, no $ sign before constants) make maintaining a common
implementation too burdensome. Therefore simply add a s390x-specific
version of parse_usdt_arg().
Note that while bcc supports index registers, this patch does not. This
should not be a problem in most cases, since s390 uses a default value
"nor" for STAP_SDT_ARG_CONSTRAINT.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220407214411.257260-4-iii@linux.ibm.com
Fix several typos and references to non-existing headers.
Also use __BYTE_ORDER__ instead of __BYTE_ORDER for consistency with
the rest of the bpf code - see commit 45f2bebc80 ("libbpf: Fix
endianness detection in BPF_CORE_READ_BITFIELD_PROBED()") for
rationale).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220407214411.257260-2-iii@linux.ibm.com
As reported by Naresh:
perf build errors on i386 [1] on Linux next-20220407 [2]
usdt.c:1181:5: error: "__x86_64__" is not defined, evaluates to 0
[-Werror=undef]
1181 | #if __x86_64__
| ^~~~~~~~~~
usdt.c:1196:5: error: "__x86_64__" is not defined, evaluates to 0
[-Werror=undef]
1196 | #if __x86_64__
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Use #ifdef instead of #if to avoid this.
Fixes: 4c59e584d1 ("libbpf: Add x86-specific USDT arg spec parsing logic")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220407203842.3019904-1-andrii@kernel.org
Add x86/x86_64-specific USDT argument specification parsing. Each
architecture will require their own logic, as all this is arch-specific
assembly-based notation. Architectures that libbpf doesn't support for
USDTs will pr_warn() with specific error and return -ENOTSUP.
We use sscanf() as a very powerful and easy to use string parser. Those
spaces in sscanf's format string mean "skip any whitespaces", which is
pretty nifty (and somewhat little known) feature.
All this was tested on little-endian architecture, so bit shifts are
probably off on big-endian, which our CI will hopefully prove.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-6-andrii@kernel.org
Last part of architecture-agnostic user-space USDT handling logic is to
set up BPF spec and, optionally, IP-to-ID maps from user-space.
usdt_manager performs a compact spec ID allocation to utilize
fixed-sized BPF maps as efficiently as possible. We also use hashmap to
deduplicate USDT arg spec strings and map identical strings to single
USDT spec, minimizing the necessary BPF map size. usdt_manager supports
arbitrary sequences of attachment and detachment, both of the same USDT
and multiple different USDTs and internally maintains a free list of
unused spec IDs. bpf_link_usdt's logic is extended with proper setup and
teardown of this spec ID free list and supporting BPF maps.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-5-andrii@kernel.org
Implement architecture-agnostic parts of USDT parsing logic. The code is
the documentation in this case, it's futile to try to succinctly
describe how USDT parsing is done in any sort of concreteness. But
still, USDTs are recorded in special ELF notes section (.note.stapsdt),
where each USDT call site is described separately. Along with USDT
provider and USDT name, each such note contains USDT argument
specification, which uses assembly-like syntax to describe how to fetch
value of USDT argument. USDT arg spec could be just a constant, or
a register, or a register dereference (most common cases in x86_64), but
it technically can be much more complicated cases, like offset relative
to global symbol and stuff like that. One of the later patches will
implement most common subset of this for x86 and x86-64 architectures,
which seems to handle a lot of real-world production application.
USDT arg spec contains a compact encoding allowing usdt.bpf.h from
previous patch to handle the above 3 cases. Instead of recording which
register might be needed, we encode register's offset within struct
pt_regs to simplify BPF-side implementation. USDT argument can be of
different byte sizes (1, 2, 4, and 8) and signed or unsigned. To handle
this, libbpf pre-calculates necessary bit shifts to do proper casting
and sign-extension in a short sequences of left and right shifts.
The rest is in the code with sometimes extensive comments and references
to external "documentation" for USDTs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-4-andrii@kernel.org
Wire up libbpf USDT support APIs without yet implementing all the
nitty-gritty details of USDT discovery, spec parsing, and BPF map
initialization.
User-visible user-space API is simple and is conceptually very similar
to uprobe API.
bpf_program__attach_usdt() API allows to programmatically attach given
BPF program to a USDT, specified through binary path (executable or
shared lib), USDT provider and name. Also, just like in uprobe case, PID
filter is specified (0 - self, -1 - any process, or specific PID).
Optionally, USDT cookie value can be specified. Such single API
invocation will try to discover given USDT in specified binary and will
use (potentially many) BPF uprobes to attach this program in correct
locations.
Just like any bpf_program__attach_xxx() APIs, bpf_link is returned that
represents this attachment. It is a virtual BPF link that doesn't have
direct kernel object, as it can consist of multiple underlying BPF
uprobe links. As such, attachment is not atomic operation and there can
be brief moment when some USDT call sites are attached while others are
still in the process of attaching. This should be taken into
consideration by user. But bpf_program__attach_usdt() guarantees that
in the case of success all USDT call sites are successfully attached, or
all the successfuly attachments will be detached as soon as some USDT
call sites failed to be attached. So, in theory, there could be cases of
failed bpf_program__attach_usdt() call which did trigger few USDT
program invocations. This is unavoidable due to multi-uprobe nature of
USDT and has to be handled by user, if it's important to create an
illusion of atomicity.
USDT BPF programs themselves are marked in BPF source code as either
SEC("usdt"), in which case they won't be auto-attached through
skeleton's <skel>__attach() method, or it can have a full definition,
which follows the spirit of fully-specified uprobes:
SEC("usdt/<path>:<provider>:<name>"). In the latter case skeleton's
attach method will attempt auto-attachment. Similarly, generic
bpf_program__attach() will have enought information to go off of for
parameterless attachment.
USDT BPF programs are actually uprobes, and as such for kernel they are
marked as BPF_PROG_TYPE_KPROBE.
Another part of this patch is USDT-related feature probing:
- BPF cookie support detection from user-space;
- detection of kernel support for auto-refcounting of USDT semaphore.
The latter is optional. If kernel doesn't support such feature and USDT
doesn't rely on USDT semaphores, no error is returned. But if libbpf
detects that USDT requires setting semaphores and kernel doesn't support
this, libbpf errors out with explicit pr_warn() message. Libbpf doesn't
support poking process's memory directly to increment semaphore value,
like BCC does on legacy kernels, due to inherent raciness and danger of
such process memory manipulation. Libbpf let's kernel take care of this
properly or gives up.
Logistically, all the extra USDT-related infrastructure of libbpf is put
into a separate usdt.c file and abstracted behind struct usdt_manager.
Each bpf_object has lazily-initialized usdt_manager pointer, which is
only instantiated if USDT programs are attempted to be attached. Closing
BPF object frees up usdt_manager resources. usdt_manager keeps track of
USDT spec ID assignment and few other small things.
Subsequent patches will fill out remaining missing pieces of USDT
initialization and setup logic.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-3-andrii@kernel.org
