[ Upstream commit e0c1ca236e28e4263fba76d47a108ed95dcae33e ]
In case the user sets the enable_ini to some preset, we want to honor
the value.
Remove the ops to set the value of the module parameter is runtime, we
don't want to allow to modify the value in runtime since we configure
the firmware once at the beginning on its life.
Fixes: b49c2b252b ("iwlwifi: Configure FW debug preset via module param.")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.5734e0f374bb.I6698eda8ed2112378dd47ac5d62866ebe7a94f77@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The iwl_fw_ini_error_dump_range structure has conflicting alignment
requirements for the inner union and the outer struct:
In file included from drivers/net/wireless/intel/iwlwifi/fw/dbg.c:9:
drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2: error: field within 'struct iwl_fw_ini_error_dump_range' is less aligned than 'union iwl_fw_ini_error_dump_range::(anonymous at drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2)' and is usually due to 'struct iwl_fw_ini_error_dump_range' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
union {
As the original intention was apparently to make the entire structure
unaligned, mark the innermost members the same way so the union
becomes packed as well.
Fixes: 973193554c ("iwlwifi: dbg_ini: dump headers cleanup")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616090343.2454061-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
LMAC error table address was checked against UMAC
error table minimum address defined. Because of that,
the LMAC error table was not read, since both addresses
belong to different ranges. As addresses are updated from
FW alive message and should be correct, this check is not
needed.
Still keep the check for address 0 to avoid NULL address read.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.08ab1497904d.I270d4c5bcc23c5ecd0b7db475501032c450852ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are occasionally bugs which cause the device to try
to use a TFD that it wasn't supposed to, and these are
very hard to diagnose. Fill all unused TFDs with a debug
command that immediately causes an error to be detected
in these cases.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.10a9af1ca91f.Ifc790d62c52b4bc9a74c9581610af498509f5759@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As part of the new security API in the FW, all security keys are to
be removed before station removal. Until now IGTK rekey
wasn't supported in the D3 resume flow, and thus the driver might
not know the right key to remove.
If an IGTK was rekeyed during D3 the old IGTK is removed and the
new key is updated. If not, the old key's IPN is updated.
As opposed to GTK, which both the FW and the driver hold it's two
most recent keys, only one IGTK is held.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621144844.b53c301c07e6.I375277a10a1f756b93d4a343f6664351a80189c5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have the trailing dash here, but that complicates all
the code. Simplify this by removing the dashes, adding
them to the *_MODULE_FIRMWARE macros, and adjusting the
code using this accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.72240ca13b83.I1f4ed547f0964719ed98a3ef928080462d594491@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All the configurations for the various Bz/Gl devices
are basically identical, except for Gl A-step and the
firmware filename prefixes.
Add some infrastructure to auto-generate the firmware
filename prefix based on the detected MAC step and
RF name/step, and remove all the unneeded configs.
This reduces the size of the iwlwifi module by ~9k:
517582 27111 560 545253 851e5 drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
526885 27083 560 554528 87620 drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.1dc121ba338f.I07d651516eb82cbaded4724ef30558a50f2fa866@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for scan request command version 17, which supports
specifying the maximal EIRP PSD value that can be used for
probe request transmission on a given channel.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.0a41c847d450.I0c9b45cc3eb39d44c75d3bdca84f0a91fdad1fa1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We skipped this in the past, but now we will need it for some
platforms. Implement loading the PHY filter configuration IDs
from the WPFC ACPI table. Note that the firmware must also be
aware of the right filter configuration IDs (they're just the
IDs of a filter configuration, not the actual configuration).
Remove the useless hardcoded zeroes while at it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.035026ea3169.I3a1fc1fe644fefa0d818ee1926c5fc331d68e8a3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the firmware misbehaves (according to the driver), we
often either ignore that, or WARN_ON, which is very noisy
but doesn't really help.
Add a little helper macro IWL_FW_CHECK() that can be used
in place of WARN_ON() in conditions, and make it take a
message that's printed in this case. We can also add more
behaviour to this in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.2e12ac670cea.Ia0198036b7a626876d836bd41a4b2d2b1e65c5ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On fw error dump, dmesg prints FSEQ register data. Add 4
additional prints in order to match those being dumped
by Windows driver. Allows fw infra to correctly detect
version mismatch.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f40dc9c810a8.I26227900d0b7e9a71fefe5cbf57cf6b46ee44413@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_acpi_get_wifi_pkg_range(), iwl_acpi_get_wifi_pkg() and
iwl_acpi_get_object() need not be exported etc., they're used
only within the same file. Make them static.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e866032e4106.Ifede7f7c25b17a8215b154ce01da513b75384325@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iwl_mvm_get_lmac_id() function is currently
defined as a static inline function under fw/api
and receives mvm's fw pointer. It will need the
ability to access other mvm struct members for
future capabilities such as debug. Move the function
out of the fw/api and into mvm proper as a regular
function and have it receive the pointer to mvm.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.507b2f9f64eb.I0ec91310e1911c33faf396b5e17bcb11a164f6ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add prints of ETSI and China bits.
Check if need to mask the China bit (when the firmware doesn't
support it) in a separate flow, so it will be easier to follow
the conditions. Add a separate message for the command version.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.4ee455ec1ee8.I6f1a4b7dfa5cfd9b4f4a4b5bb5567849e629ae96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, we only need to support BTM rejection.
However, in the future we might want to support other BTM modes.
Rephrase its naming.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.ad20f10668d1.Icbb3fbae50b2302b97225b183dd336b02a4f37ee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support new firmware that can validate the validate bits in
sniffer mode, and advertise that fact and the result of the
checks in the U-SIG radiotap field.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.c20480aa1171.Icc0d077dae01d662ccb948823e196aa9c5c87976@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware needs to know the esr_transtition_timeout to time the
transition between EMLSR and single radio with the AP.
Add the EMLSR support bit to the wiphy extended capabilities so that
it'll be sent in our association request frame. There are some
limitations in the implementation so we cannot use zero
padding/transition delay; fill the correct values.
Also, feed the medium_synchronization delay to the firmware.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.09fa06820d03.Ie9a9fd37d4948f8c5dd91161de254184b1a093c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The program counter address is read from the TLV and
PC address is printed in debug messages.
Read the value at PC address and print the value
instead of the register address.
Fixes: 5e31b3df86 ("wifi: iwlwifi: dbg: print pc register data once fw dump occurred")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.e5a5f18f1b2c.Ib6117a4e7f66a075913241cc81477c0059953d5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The hardware, depending on which part fails or times out,
returns 0xA5A5A5A. or 0x5A5A5A5. with the lowest 4 bits
encoding some further reason/status. However, mostly we
don't really need to care about the exact reasons, so
unify the checks for this to avoid hardcoding those magic
values all over the driver.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.3e2959741a38.I1c297a53787b87e4e2b8f296c041921338573f4d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the MCC update response version 8.
Versions 5-6 are already covered by the existing
flags conversion, and 7 isn't used.
The capabilities field in iwl_mcc_update_resp is 32 bits
wide now, and the flags moved, so some more changes are
needed.
While at it, convert the flags to bool (to avoid having
to deal with BIT(16) specially etc.) and use the
struct_size() macro for the memory allocation.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.71a7070aecd7.Ibddcb9fbfa74895f742c0ac20968720691c94853@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a number of upcoming things in both the stack and
drivers that would otherwise conflict, so merge wireless to
wireless-next to be able to avoid those conflicts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit b70813e4a8 ("wifi: iwlwifi: update response
for mcc_update command") since it causes a merge conflict, and it
seems easier to redo the patch later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When PNVM is obtained from UEFI, there's an additional memory
descriptor TLV that has to be handled. It is the same TLV that
holds data in the reduced power tables. Also, in this TLV, the
actual data is located after address and size, so add the
corresponding offset.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.8c5f5ee8e30b.Id1893c9dec140b5ba4abe8a121c2e1a1d121d2d7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace the field reduce_power_dram with a struct that holds data about
the reduced-power tables drams regions. Generalize load_payloads_segments()
to work for both pnvm tables and reduction power tables.
Make required adjustments in the data structures.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.6fe66958f049.I85d80682229fc02fe354462cc9da40937558f30c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Generalize the parsing, loading, and setting of the power-reduce
tables, in order to support allocation of several DRAM payloads
in the future.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.564f1eead99b.Iaba653b21dc09aafc72b9bbb3928abddce0db50a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Take the part that copies the tables into DRAM, out of the method
that sets the prph_scratch to make the code cleaner. Each of the
operations will get more complex in the future when it will also
support larger power-reduce tables images.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.7695684dc848.I13626cd318e5d68efec9618b2045f52788bff114@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Change iwl_pnvm_parse so it will only save the information into the
iwl_pnvm_image struct. This enables to use the parsing code for the
power reduce tables in the future.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.504b42fc1611.I4ddf6ad76d922d118fcbcc4f0e9ec003753d0b75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Take the part that is copying the pnvm image into DRAM, out of the
the method that sets the prph_scratch. Makes the code cleaner since
those 2 operations don't always happen together (loading should happen
only once while setting can happen more than once).
In addition, each operation will get more complex in the future when
it will support also larger pnvm images.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.4c0728239fd6.Ibc30a9fbdb6123dadbe2dbb89318dbd5ec01080a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Generalize iwl_pnvm_parse(). This saves us from copying each payload
twice (first in the parsing and later when copying it to the dram).
Moreover, its more compatible for handling larger pnvm tables in
the future (in which payloads won't be concatenated).
The main changes are:
1. Take out the concatenating of the payloads from the parsing level
2. Start using iwl_pnvm_image structure that will hold pointers to
payloads that should be delivered to fw, their sizes and number.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.06c02f380b6f.I03a3030fca194aa0c4bc2ecd18531f8914e98cfd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Indicate to the firmware for each station whether or not MFP
is used with this station. Note that we indicate MFP for it
before authorized since we don't know yet, and that will make
the firmware not handle should-be-protected management frames
without being able to check them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230601095201.b1052f39af4c.I1b46b751d5808e65ea3d0e7b8b38209c5aecf042@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are mainly two types of BTM (BSS Transition Management)
requests, recommendations and notifications. For the first type,
a response is needed otherwise, most probably the STA will be
disconnected.
Since we don't want to wake up the host on it, set the BTM to reject
offload flag (if the device supports it) and rely on the FW to take
care of it. The FW will reject the BTM request and in case the AP
sends DEAUTH the FW can wake up the host to let it decide on the
next steps.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194629.d95ae6f2804c.I9457acc55bc23ce715c714b5088058f52540c224@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
