In highres mode, the tick reschedules itself unconditionally to the
next jiffies.
However while this clock reprogramming is relevant when the tick is
in periodic mode, it's not that interesting when we run in dynticks mode
because irq exit is likely going to overwrite the next tick to some
randomly deferred future.
So lets just get rid of this tick self rescheduling in dynticks mode.
This way we can avoid some clockevents double write in favourable
scenarios like when we stop the tick completely in idle while no other
hrtimer is pending.
Suggested-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
When we reach the end of the tick handler, we unconditionally reschedule
the next tick to the next jiffy. Then on irq exit, the nohz code
overrides that setting if needed and defers the next tick as far away in
the future as possible.
Now in the best dynticks case, when we actually don't need any tick in
the future (ie: expires == KTIME_MAX), low-res and high-res behave
differently. What we want in this case is to cancel the next tick
programmed by the previous one. That's what we do in high-res mode. OTOH
we lack a low-res mode equivalent of hrtimer_cancel() so we simply don't
do anything in this case and the next tick remains scheduled to jiffies + 1.
As a result, in low-res mode, when the dynticks code determines that no
tick is needed in the future, we can recursively get a spurious tick
every jiffy because then the next tick is always reprogrammed from the
tick handler and is never cancelled. And this can happen indefinetly
until some subsystem actually needs a precise tick in the future and only
then we eventually overwrite the previous tick handler setting to defer
the next tick.
We are fixing this by introducing the ONESHOT_STOPPED mode which will
let us pause a clockevent when no further interrupt is needed. Meanwhile
we can't expect all drivers to support this new mode.
So lets reduce much of the symptoms by skipping the nohz-blind tick
rescheduling from the tick-handler when the CPU is in dynticks mode.
That tick rescheduling wrongly assumed periodicity and the low-res
dynticks code can't cancel such decision. This breaks the recursive (and
thus the worst) part of the problem. In the worst case now, we'll get
only one extra tick due to uncancelled tick scheduled before we entered
dynticks mode.
This also removes a needless clockevent write on idle ticks. Since those
clock write are usually considered to be slow, it's a general win.
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Avoid double_rq_lock() and use TASK_ON_RQ_MIGRATING for
load_balance(). The advantage is (obviously) not holding two
rq->lock's at the same time and thereby increasing parallelism.
Further note that if there was no task to migrate we will not
have acquired the second rq->lock at all.
The important point to note is that because we acquire dst->lock
immediately after releasing src->lock the potential wait time of
task_rq_lock() callers on TASK_ON_RQ_MIGRATING is not longer
than it would have been in the double rq lock scenario.
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1408528109.23412.94.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Avoid double_rq_lock() and use the TASK_ON_RQ_MIGRATING state for
active_load_balance_cpu_stop(). The advantage is (obviously) not
holding two 'rq->lock's at the same time and thereby increasing
parallelism.
Further note that if there was no task to migrate we will not
have acquired the second rq->lock at all.
The important point to note is that because we acquire dst->lock
immediately after releasing src->lock the potential wait time of
task_rq_lock() callers on TASK_ON_RQ_MIGRATING is not longer
than it would have been in the double rq lock scenario.
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1408528081.23412.92.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Avoid double_rq_lock() and use TASK_ON_RQ_MIGRATING for
__migrate_task(). The advantage is (obviously) not holding two
rq->lock's at the same time and thereby increasing parallelism.
The important point to note is that because we acquire dst->lock
immediately after releasing src->lock the potential wait time of
task_rq_lock() callers on TASK_ON_RQ_MIGRATING is not longer
than it would have been in the double rq lock scenario.
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1408528070.23412.89.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a new p->on_rq state which will be used to indicate that a task
is in a process of migrating between two RQs. It allows to get
rid of double_rq_lock(), which we used to use to change a rq of
a queued task before.
Let's consider an example. To move a task between src_rq and
dst_rq we will do the following:
raw_spin_lock(&src_rq->lock);
/* p is a task which is queued on src_rq */
p = ...;
dequeue_task(src_rq, p, 0);
p->on_rq = TASK_ON_RQ_MIGRATING;
set_task_cpu(p, dst_cpu);
raw_spin_unlock(&src_rq->lock);
/*
* Both RQs are unlocked here.
* Task p is dequeued from src_rq
* but its on_rq value is not zero.
*/
raw_spin_lock(&dst_rq->lock);
p->on_rq = TASK_ON_RQ_QUEUED;
enqueue_task(dst_rq, p, 0);
raw_spin_unlock(&dst_rq->lock);
While p->on_rq is TASK_ON_RQ_MIGRATING, task is considered as
"migrating", and other parallel scheduler actions with it are
not available to parallel callers. The parallel caller is
spining till migration is completed.
The unavailable actions are changing of cpu affinity, changing
of priority etc, in other words all the functionality which used
to require task_rq(p)->lock before (and related to the task).
To implement TASK_ON_RQ_MIGRATING support we primarily are using
the following fact. Most of scheduler users (from which we are
protecting a migrating task) use task_rq_lock() and
__task_rq_lock() to get the lock of task_rq(p). These primitives
know that task's cpu may change, and they are spining while the
lock of the right RQ is not held. We add one more condition into
them, so they will be also spinning until the migration is
finished.
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1408528062.23412.88.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Implement task_on_rq_queued() and use it everywhere instead of
on_rq check. No functional changes.
The only exception is we do not use the wrapper in
check_for_tasks(), because it requires to export
task_on_rq_queued() in global header files. Next patch in series
would return it back, so we do not twist it from here to there.
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1408528052.23412.87.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(sched_entity::on_rq == 1) does not guarantee the task is pickable;
changes on throttled cfs_rq must not lead to reschedule.
Check for task_struct::on_rq instead.
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1407312361.8424.35.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Match the declaration of runqueues with the definition.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1407950893-32731-1-git-send-email-bobby.prani@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When running a 32-bit userspace on a 64-bit kernel (eg. i386
application on x86_64 kernel or 32-bit arm userspace on arm64
kernel) some of the perf ioctls must be treated with special
care, as they have a pointer size encoded in the command.
For example, PERF_EVENT_IOC_ID in 32-bit world will be encoded
as 0x80042407, but 64-bit kernel will expect 0x80082407. In
result the ioctl will fail returning -ENOTTY.
This patch solves the problem by adding code fixing up the
size as compat_ioctl file operation.
Reported-by: Drew Richardson <drew.richardson@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1402671812-9078-1-git-send-email-pawel.moll@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
/proc/<pid>/cgroup contains one cgroup path on each line. If cgroup names are
allowed to contain "\n", applications cannot parse /proc/<pid>/cgroup safely.
Signed-off-by: Alban Crequy <alban.crequy@collabora.co.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
This patch avoids printing the message 'enabled on all CPUs,
...' multiple times. For example, the issue can occur in the
following scenario:
1) watchdog_nmi_enable() fails to enable PMU counters and sets
cpu0_err.
2) 'echo [0|1] > /proc/sys/kernel/nmi_watchdog' is executed to
disable and re-enable the watchdog mechanism 'on the fly'.
3) If watchdog_nmi_enable() succeeds to enable PMU counters,
each CPU will print the message because step1 left behind a
non-zero cpu0_err.
if (!IS_ERR(event)) {
if (cpu == 0 || cpu0_err)
pr_info("enabled on all CPUs, ...")
The patch avoids this by clearing cpu0_err in watchdog_nmi_disable().
Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: pbonzini@redhat.com
Link: http://lkml.kernel.org/r/1407768567-171794-4-git-send-email-dzickus@redhat.com
[ Applied small cleanups. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Many embedded systems will not need these syscalls, and omitting them
saves space. Add a new EXPERT config option CONFIG_ADVISE_SYSCALLS
(default y) to support compiling them out.
bloat-o-meter:
add/remove: 0/3 grow/shrink: 0/0 up/down: 0/-2250 (-2250)
function old new delta
sys_fadvise64 57 - -57
sys_fadvise64_64 691 - -691
sys_madvise 1502 - -1502
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
The commit
4982223e51 module: set nx before marking module MODULE_STATE_COMING.
introduced a regression: if a module fails to parse its arguments or
if mod_sysfs_setup fails, then the module's memory will be freed
while still read-only. Anything that reuses that memory will crash
as soon as it tries to write to it.
Cc: stable@vger.kernel.org # v3.16
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- Fix for an ACPI-based device hotplug regression introduced in 3.14
that causes a kernel panic to trigger when memory hot-remove is
attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen.
- Fix for a cpufreq regression introduced in 3.16 that triggers a
"sleeping function called from invalid context" bug in
dev_pm_opp_init_cpufreq_table() from Stephen Boyd.
- ACPI battery driver fix for a warning message added in 3.16 that
prints silly stuff sometimes from Mariusz Ceier.
- Hibernation fix for safer handling of mismatches in the 820 memory
map between the configurations during image creation and during
the subsequent restore from Chun-Yi Lee.
- ACPI processor driver fix to handle CPU hotplug notifications
correctly during system suspend/resume from Lan Tianyu.
- Series of four cpuidle menu governor cleanups that also should
speed it up a bit from Mel Gorman.
- Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little
cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus Pargmann
and Uwe Kleine-König.
- Version 3.0 of the analyze_suspend.py suspend profiling tool
from Todd E Brandt.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=kpiw
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
"These are a couple of regression fixes, cpuidle menu governor
optimizations, fixes for ACPI proccessor and battery drivers,
hibernation fix to avoid problems related to the e820 memory map,
fixes for a few cpufreq drivers and a new version of the suspend
profiling tool analyze_suspend.py.
Specifics:
- Fix for an ACPI-based device hotplug regression introduced in 3.14
that causes a kernel panic to trigger when memory hot-remove is
attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen
- Fix for a cpufreq regression introduced in 3.16 that triggers a
"sleeping function called from invalid context" bug in
dev_pm_opp_init_cpufreq_table() from Stephen Boyd
- ACPI battery driver fix for a warning message added in 3.16 that
prints silly stuff sometimes from Mariusz Ceier
- Hibernation fix for safer handling of mismatches in the 820 memory
map between the configurations during image creation and during the
subsequent restore from Chun-Yi Lee
- ACPI processor driver fix to handle CPU hotplug notifications
correctly during system suspend/resume from Lan Tianyu
- Series of four cpuidle menu governor cleanups that also should
speed it up a bit from Mel Gorman
- Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little
cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus
Pargmann and Uwe Kleine-König
- Version 3.0 of the analyze_suspend.py suspend profiling tool from
Todd E Brandt"
* tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / battery: Fix warning message in acpi_battery_get_state()
PM / tools: analyze_suspend.py: update to v3.0
cpufreq: arm_big_little: fix module license spec
cpufreq: speedstep-smi: fix decimal printf specifiers
ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove()
cpufreq: OPP: Avoid sleeping while atomic
cpufreq: cpu0: Do not print error message when deferring
cpufreq: integrator: Use set_cpus_allowed_ptr
PM / hibernate: avoid unsafe pages in e820 reserved regions
ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events
cpuidle: menu: Lookup CPU runqueues less
cpuidle: menu: Call nr_iowait_cpu less times
cpuidle: menu: Use ktime_to_us instead of reinventing the wheel
cpuidle: menu: Use shifts when calculating averages where possible
Benjamin Herrenschmidt pointed out that I further missed modifying
update_vsyscall after the wall_to_mono value was changed to a
timespec64. This causes issues on powerpc32, which expects a 32bit
timespec.
This patch fixes the problem by properly converting from a timespec64 to
a timespec before passing the value on to the arch-specific vsyscall
logic.
[ Thomas is currently on vacation, but reviewed it and wanted me to send
this fix on to you directly. ]
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more powerpc updates from Ben Herrenschmidt:
"Here are some more powerpc bits for 3.17, essentially fixes.
The biggest series, also aimed at -stable, is from Aneesh and is the
result of weeks and weeks of debugging to find out why the heck or THP
implementation was occasionally triggering multi-hit errors in our
level 1 TLB. It ended up being a combination of issues including
subtleties as to how we should invalidate those special 'MPSS' pages
we use to allow the use of 16M pages inside 4K/64K "base page size"
segments (you really have to love our MMU !)
Another interesting one in the "OMG" category is the series from
Michael adding memory barriers to spin_is_locked(). That's also the
result of many days of debugging to figure out why the semaphore code
would occasionally crash in ways that made no sense. It ended up
being some creative lock stacking that was defeated by the fact that
our locks allow a load inside the locked section to be re-ordered with
the load of the lock value itself (I'm still of two mind about whether
to kill that once and for all by putting a heavier barrier back into
our lock implementation...). The fixes come with a long explanation
in the cset comments, feel free to read it if you feel like having a
headache today"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits)
powerpc/thp: Add tracepoints to track hugepage invalidate
powerpc/mm: Use read barrier when creating real_pte
powerpc/thp: Use ACCESS_ONCE when loading pmdp
powerpc/thp: Invalidate with vpn in loop
powerpc/thp: Handle combo pages in invalidate
powerpc/thp: Invalidate old 64K based hash page mapping before insert of 4k pte
powerpc/thp: Don't recompute vsid and ssize in loop on invalidate
powerpc/thp: Add write barrier after updating the valid bit
powerpc: reorder per-cpu NUMA information's initialization
powerpc/perf/hv-24x7: Use kmem_cache_free
powerpc/pseries/hvcserver: Fix endian issue in hvcs_get_partner_info
powerpc: Hard disable interrupts in xmon
powerpc: remove duplicate definition of TEXASR_FS
powerpc/pseries: Avoid deadlock on removing ddw
powerpc/pseries: Failure on removing device node
powerpc/boot: Use correct zlib types for comparison
powerpc/powernv: Interface to register/unregister opal dump region
printk: Add function to return log buffer address and size
powerpc: Add POWER8 features to CPU_FTRS_POSSIBLE/ALWAYS
powerpc/ppc476: Disable BTAC
...
Pull seccomp fix from James Morris.
BUG(!spin_is_locked()) really doesn't work very well in UP
configurations without any actual spinlock state. Which is very much
why we have that "assert_spin_lock()" function for this.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
seccomp: Replace BUG(!spin_is_locked()) with assert_spin_lock
Unlike the original unfair rwlock implementation, queued rwlock
will grant lock according to the chronological sequence of the lock
requests except when the lock requester is in the interrupt context.
Consequently, recursive read_lock calls will now hang the process if
there is a write_lock call somewhere in between the read_lock calls.
This patch updates the lockdep implementation to look for recursive
read_lock calls. A new read state (3) is used to mark those read_lock
call that cannot be recursively called except in the interrupt
context. The new read state does exhaust the 2 bits available in
held_lock:read bit field. The addition of any new read state in the
future may require a redesign of how all those bits are squeezed
together in the held_lock structure.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1407345722-61615-2-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
4badad35 ("locking/mutex: Disable optimistic spinning on some
architectures") added a ARCH_SUPPORTS_ATOMIC_RMW flag to
disable the mutex optimistic feature on specific archs.
Because CONFIG_MUTEX_SPIN_ON_OWNER only depended on DEBUG and
SMP, it was ok to have the ->owner field conditional a bit
flexible. However by adding a new variable to the matter,
we can waste space with the unused field, ie: CONFIG_SMP &&
(!CONFIG_MUTEX_SPIN_ON_OWNER && !CONFIG_DEBUG_MUTEX).
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: aswin@hp.com
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1406752916-3341-5-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we fail to acquire the mutex in the fastpath, we end up calling
__mutex_lock_common(). A *lot* goes on in this function. Move out the
optimistic spinning code into mutex_optimistic_spin() and simplify
the former a bit. Furthermore, this is similar to what we have in
rwsems. No logical changes.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: aswin@hp.com
Cc: mingo@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1406752916-3341-4-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When unlocking, we always want to reach the slowpath with the lock's counter
indicating it is unlocked. -- as returned by the asm fastpath call or by
explicitly setting it. While doing so, at least in theory, we can optimize
and allow faster lock stealing.
When unlocking, we always want to reach the slowpath with the lock's counter
indicating it is unlocked. -- as returned by the asm fastpath call or by
explicitly setting it. While doing so, at least in theory, we can optimize
and allow faster lock stealing.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: jason.low2@hp.com
Cc: aswin@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1406752916-3341-2-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Just how the locking-end behaves, when unlocking, go ahead and
obtain the proper data structure immediately after the previous
(asm-end) call exits and there are (probably) pending waiters.
This simplifies a bit some of the layering.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: jason.low2@hp.com
Cc: aswin@hp.com
Cc: mingo@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1406752916-3341-1-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Its been a while and there are no in-tree users left, so remove the
deprecated barriers.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Chen, Gong <gong.chen@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: John Sullivan <jsrhbz@kanargh.force9.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
One should first enqueue to the waitqueue and then check for the
condition. If the condition gets true after mutex_unlock() but before
poll_wait() then we lose it and would have wait for another wakeup.
This has been like this since v2.6.31-rc1 commit c7138f37f9 ("perf_counter:
fix perf_poll()"). Before that it was slightly worse. I guess we get enough
wakeups so if we miss here one it doesn't really matter. It is still a
bad example.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1407159068-1478-1-git-send-email-bigeasy@linutronix.de
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In cases when the owner task exits before the workload and the
workload made some forks, all the events stay in until the last
workload process exits. Thats' because each child event holds
parent reference.
We want to release all children events once the parent is gone,
because at that time there's no process to read them anyway, so
they're just eating resources.
This removal races with process exit, which removes all events
and fork, which clone events. To be clear of those two, adding
work queue to remove orphaned child for context in case such
event is detected.
Using delayed work queue (with delay == 1), because we queue this
work under perf scheduler callbacks. Normal work queue tries to wake
up the queue process, which deadlocks on rq->lock in this place.
Also preventing clones from abandoned parent event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1406896382-18404-4-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Adding fake EVENT_OWNER_KERNEL owner pointer value for kernel perf
events, so we could distinguish it from user events, which needs
special care in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1406896382-18404-3-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Platforms like IBM Power Systems supports service processor
assisted dump. It provides interface to add memory region to
be captured when system is crashed.
During initialization/running we can add kernel memory region
to be collected.
Presently we don't have a way to get the log buffer base address
and size. This patch adds support to return log buffer address
and size.
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Commit a43455a1d5 ensures that
task_numa_migrate will call task_numa_compare on the preferred
node all the time, even when the preferred node has no free capacity.
This could lead to a performance regression if nr_running == capacity
on both the source and the destination node. This can be avoided by
also checking for nr_running == capacity on the source node, which is
one stricter than checking .has_free_capacity.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: mgorman@suse.de
Cc: vincent.guittot@linaro.org
Cc: Morten.Rasmussen@arm.com
Cc: nicolas.pitre@linaro.org
Cc: efault@gmx.de
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1407173008-9334-2-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The child variable in build_overlap_sched_groups() actually refers to the
peer or sibling domain of the given CPU. Rename it to sibling to be consistent
with the naming in build_group_mask().
Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1406942283-18249-1-git-send-email-zzhsuny@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Allow calculate_imbalance() to 'create' idle cpus in the busiest group
if there are idle cpus in the local group.
Suggested-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140729152705.GX12054@laptop.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently update_sd_pick_busiest only identifies the busiest sd
that is either overloaded, or has a group imbalance. When no
sd is imbalanced or overloaded, the load balancer fails to find
the busiest domain.
This breaks load balancing between domains that are not overloaded,
in the !SD_ASYM_PACKING case. This patch makes update_sd_pick_busiest
return true when the busiest sd yet is encountered.
Groups are ranked in the order overloaded > imbalanced > other,
with higher ranked groups getting priority even when their load
is lower. This is necessary due to the possibility of unequal
capacities and cpumasks between domains within a sched group.
Behaviour for SD_ASYM_PACKING does not seem to match the comment,
but I have no hardware to test that so I have left the behaviour
of that code unchanged.
Enum for group classification suggested by Peter Zijlstra.
Signed-off-by: Rik van Riel <riel@redhat.com>
[peterz: replaced sg_lb_stats::group_imb with the new enum group_type
in an attempt to avoid endless recalculation]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Michael Neuling <mikey@neuling.org>
Cc: ktkhai@parallels.com
Cc: tim.c.chen@linux.intel.com
Cc: nicolas.pitre@linaro.org
Cc: jhladky@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140729152743.GI3935@laptop
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rik noticed that calculate_imbalance() relies on
update_sd_pick_busiest() to guarantee that busiest->sum_nr_running >
busiest->group_capacity_factor.
Break this implicit assumption (with the intent of not providing it
anymore) by having calculat_imbalance() verify it and not rely on
others.
Reported-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20140729152631.GW12054@laptop.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* pm-sleep:
PM / hibernate: avoid unsafe pages in e820 reserved regions
* pm-cpufreq:
cpufreq: arm_big_little: fix module license spec
cpufreq: speedstep-smi: fix decimal printf specifiers
cpufreq: OPP: Avoid sleeping while atomic
cpufreq: cpu0: Do not print error message when deferring
cpufreq: integrator: Use set_cpus_allowed_ptr
* pm-cpuidle:
cpuidle: menu: Lookup CPU runqueues less
cpuidle: menu: Call nr_iowait_cpu less times
cpuidle: menu: Use ktime_to_us instead of reinventing the wheel
cpuidle: menu: Use shifts when calculating averages where possible
Current upstream kernel hangs with mips and powerpc targets in
uniprocessor mode if SECCOMP is configured.
Bisect points to commit dbd952127d ("seccomp: introduce writer locking").
Turns out that code such as
BUG_ON(!spin_is_locked(&list_lock));
can not be used in uniprocessor mode because spin_is_locked() always
returns false in this configuration, and that assert_spin_locked()
exists for that very purpose and must be used instead.
Fixes: dbd952127d ("seccomp: introduce writer locking")
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull vfs updates from Al Viro:
"Stuff in here:
- acct.c fixes and general rework of mnt_pin mechanism. That allows
to go for delayed-mntput stuff, which will permit mntput() on deep
stack without worrying about stack overflows - fs shutdown will
happen on shallow stack. IOW, we can do Eric's umount-on-rmdir
series without introducing tons of stack overflows on new mntput()
call chains it introduces.
- Bruce's d_splice_alias() patches
- more Miklos' rename() stuff.
- a couple of regression fixes (stable fodder, in the end of branch)
and a fix for API idiocy in iov_iter.c.
There definitely will be another pile, maybe even two. I'd like to
get Eric's series in this time, but even if we miss it, it'll go right
in the beginning of for-next in the next cycle - the tricky part of
prereqs is in this pile"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
fix copy_tree() regression
__generic_file_write_iter(): fix handling of sync error after DIO
switch iov_iter_get_pages() to passing maximal number of pages
fs: mark __d_obtain_alias static
dcache: d_splice_alias should detect loops
exportfs: update Exporting documentation
dcache: d_find_alias needn't recheck IS_ROOT && DCACHE_DISCONNECTED
dcache: remove unused d_find_alias parameter
dcache: d_obtain_alias callers don't all want DISCONNECTED
dcache: d_splice_alias should ignore DCACHE_DISCONNECTED
dcache: d_splice_alias mustn't create directory aliases
dcache: close d_move race in d_splice_alias
dcache: move d_splice_alias
namei: trivial fix to vfs_rename_dir comment
VFS: allow ->d_manage() to declare -EISDIR in rcu_walk mode.
cifs: support RENAME_NOREPLACE
hostfs: support rename flags
shmem: support RENAME_EXCHANGE
shmem: support RENAME_NOREPLACE
btrfs: add RENAME_NOREPLACE
...
rarely ever hit, and requires the user to do something that users rarely
do. It took a few special test cases to even trigger this bug,
and one of them was just one test in the process of finishing up as another
one started.
Both bugs have to do with the ring buffer iterator rb_iter_peek(), but one
is more indirect than the other.
The fist bug fix is simply an increase in the safety net loop counter.
The counter makes sure that the rb_iter_peek() only iterates the number
of times we expect it can, and no more. Well, there was one way it could
iterate one more than we expected, and that caused the ring buffer
to shutdown with a nasty warning. The fix was simply to up that counter by
one.
The other bug has to be with rb_iter_reset() (called by rb_iter_peek()).
This happens when a user reads both the trace_pipe and trace files.
The trace_pipe is a consuming read and does not use the ring buffer
iterator, but the trace file is not a consuming read and does use the
ring buffer iterator. When the trace file is being read, if it detects
that a consuming read occurred, it resets the iterator and starts over.
But the reset code that does this (rb_iter_reset()), checks if the
reader_page is linked to the ring buffer or not, and will look into
the ring buffer itself if it is not. This is wrong, as it should always
try to read the reader page first. Not to mention, the code that looked
into the ring buffer did it wrong, and used the header_page "read" offset
to start reading on that page. That offset is bogus for pages in the
writable ring buffer, and was corrupting the iterator, and it would start
returning bogus events.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT44tRAAoJEKQekfcNnQGuMVIH/3evbjKT+w6Kon4S0LfLSejl
YDsXYkeO/lGiO3MnUveqq1jfw2+yHtyBVUipvfG0A61urMUhyUvjveph8Ec2cQ4Q
qHl0J28vDfF5tpKiYzygRN01wHD6GXYh+XZSChkA4ItzzD8K51lsZT1Yd+I2pTy2
DgH01EEEYiwYJcih+T4vlbKqYju6pwgxqKNCTv0RdVXUPya/tG9X2Nf8VGQTbmKS
FIO73qObYR+P9iXGIuPfyOxk2EvBiWS15WownZmfhZZxOIKx9IrDYwTsiV1+AJw+
sJFER1ulobYGDtGDa9yyrNJQr6wgbrfCDELnNKmdLUTlSwgZjLXpE2HEmlelY/s=
=5mQl
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull trace file read iterator fixes from Steven Rostedt:
"This contains a fix for two long standing bugs. Both of which are
rarely ever hit, and requires the user to do something that users
rarely do. It took a few special test cases to even trigger this bug,
and one of them was just one test in the process of finishing up as
another one started.
Both bugs have to do with the ring buffer iterator rb_iter_peek(), but
one is more indirect than the other.
The fist bug fix is simply an increase in the safety net loop counter.
The counter makes sure that the rb_iter_peek() only iterates the
number of times we expect it can, and no more. Well, there was one
way it could iterate one more than we expected, and that caused the
ring buffer to shutdown with a nasty warning. The fix was simply to
up that counter by one.
The other bug has to be with rb_iter_reset() (called by
rb_iter_peek()). This happens when a user reads both the trace_pipe
and trace files. The trace_pipe is a consuming read and does not use
the ring buffer iterator, but the trace file is not a consuming read
and does use the ring buffer iterator. When the trace file is being
read, if it detects that a consuming read occurred, it resets the
iterator and starts over. But the reset code that does this
(rb_iter_reset()), checks if the reader_page is linked to the ring
buffer or not, and will look into the ring buffer itself if it is not.
This is wrong, as it should always try to read the reader page first.
Not to mention, the code that looked into the ring buffer did it
wrong, and used the header_page "read" offset to start reading on that
page. That offset is bogus for pages in the writable ring buffer, and
was corrupting the iterator, and it would start returning bogus
events"
* tag 'trace-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Always reset iterator to reader page
ring-buffer: Up rb_iter_peek() loop count to 3
Pull namespace updates from Eric Biederman:
"This is a bunch of small changes built against 3.16-rc6. The most
significant change for users is the first patch which makes setns
drmatically faster by removing unneded rcu handling.
The next chunk of changes are so that "mount -o remount,.." will not
allow the user namespace root to drop flags on a mount set by the
system wide root. Aks this forces read-only mounts to stay read-only,
no-dev mounts to stay no-dev, no-suid mounts to stay no-suid, no-exec
mounts to stay no exec and it prevents unprivileged users from messing
with a mounts atime settings. I have included my test case as the
last patch in this series so people performing backports can verify
this change works correctly.
The next change fixes a bug in NFS that was discovered while auditing
nsproxy users for the first optimization. Today you can oops the
kernel by reading /proc/fs/nfsfs/{servers,volumes} if you are clever
with pid namespaces. I rebased and fixed the build of the
!CONFIG_NFS_FS case yesterday when a build bot caught my typo. Given
that no one to my knowledge bases anything on my tree fixing the typo
in place seems more responsible that requiring a typo-fix to be
backported as well.
The last change is a small semantic cleanup introducing
/proc/thread-self and pointing /proc/mounts and /proc/net at it. This
prevents several kinds of problemantic corner cases. It is a
user-visible change so it has a minute chance of causing regressions
so the change to /proc/mounts and /proc/net are individual one line
commits that can be trivially reverted. Unfortunately I lost and
could not find the email of the original reporter so he is not
credited. From at least one perspective this change to /proc/net is a
refgression fix to allow pthread /proc/net uses that were broken by
the introduction of the network namespace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Point /proc/mounts at /proc/thread-self/mounts instead of /proc/self/mounts
proc: Point /proc/net at /proc/thread-self/net instead of /proc/self/net
proc: Implement /proc/thread-self to point at the directory of the current thread
proc: Have net show up under /proc/<tgid>/task/<tid>
NFS: Fix /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes
mnt: Add tests for unprivileged remount cases that have found to be faulty
mnt: Change the default remount atime from relatime to the existing value
mnt: Correct permission checks in do_remount
mnt: Move the test for MNT_LOCK_READONLY from change_mount_flags into do_remount
mnt: Only change user settable mount flags in remount
namespaces: Use task_lock and not rcu to protect nsproxy
Pull arch signal handling cleanup from Richard Weinberger:
"This patch series moves all remaining archs to the get_signal(),
signal_setup_done() and sigsp() functions.
Currently these archs use open coded variants of the said functions.
Further, unused parameters get removed from get_signal_to_deliver(),
tracehook_signal_handler() and signal_delivered().
At the end of the day we save around 500 lines of code."
* 'signal-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (43 commits)
powerpc: Use sigsp()
openrisc: Use sigsp()
mn10300: Use sigsp()
mips: Use sigsp()
microblaze: Use sigsp()
metag: Use sigsp()
m68k: Use sigsp()
m32r: Use sigsp()
hexagon: Use sigsp()
frv: Use sigsp()
cris: Use sigsp()
c6x: Use sigsp()
blackfin: Use sigsp()
avr32: Use sigsp()
arm64: Use sigsp()
arc: Use sigsp()
sas_ss_flags: Remove nested ternary if
Rip out get_signal_to_deliver()
Clean up signal_delivered()
tracehook_signal_handler: Remove sig, info, ka and regs
...
Since commit 5d2acfc7b9 ("kconfig: make
allnoconfig disable options behind EMBEDDED and EXPERT") in 3.15-rc1,
"make allnoconfig" disables every possible config option.
However, a few configuration options (CC_OPTIMIZE_FOR_SIZE,
OPTIMIZE_INLINING) produce a smaller kernel when turned on, and a few
choices exist (compression, highmem, allocator) for which a non-default
option produces a smaller kernel.
Add a "tinyconfig" option, which starts from allnoconfig and then sets
these options to configure the tiniest possible kernel. This provides a
better baseline for embedded systems or efforts to reduce kernel size.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
This is the final piece of the puzzle of verifying kernel image signature
during kexec_file_load() syscall.
This patch calls into PE file routines to verify signature of bzImage. If
signature are valid, kexec_file_load() succeeds otherwise it fails.
Two new config options have been introduced. First one is
CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be
validly signed otherwise kernel load will fail. If this option is not
set, no signature verification will be done. Only exception will be when
secureboot is enabled. In that case signature verification should be
automatically enforced when secureboot is enabled. But that will happen
when secureboot patches are merged.
Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option
enables signature verification support on bzImage. If this option is not
set and previous one is set, kernel image loading will fail because kernel
does not have support to verify signature of bzImage.
I tested these patches with both "pesign" and "sbsign" signed bzImages.
I used signing_key.priv key and signing_key.x509 cert for signing as
generated during kernel build process (if module signing is enabled).
Used following method to sign bzImage.
pesign
======
- Convert DER format cert to PEM format cert
openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform
PEM
- Generate a .p12 file from existing cert and private key file
openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in
signing_key.x509.PEM
- Import .p12 file into pesign db
pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign
- Sign bzImage
pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign
-c "Glacier signing key - Magrathea" -s
sbsign
======
sbsign --key signing_key.priv --cert signing_key.x509.PEM --output
/boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+
Patch details:
Well all the hard work is done in previous patches. Now bzImage loader
has just call into that code and verify whether bzImage signature are
valid or not.
Also create two config options. First one is CONFIG_KEXEC_VERIFY_SIG.
This option enforces that kernel has to be validly signed otherwise kernel
load will fail. If this option is not set, no signature verification will
be done. Only exception will be when secureboot is enabled. In that case
signature verification should be automatically enforced when secureboot is
enabled. But that will happen when secureboot patches are merged.
Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option
enables signature verification support on bzImage. If this option is not
set and previous one is set, kernel image loading will fail because kernel
does not have support to verify signature of bzImage.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
