Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
- Introduce new device migration uAPI and implement device specific
mlx5 vfio-pci variant driver supporting new protocol (Jason Gunthorpe,
Yishai Hadas, Leon Romanovsky)
- New HiSilicon acc vfio-pci variant driver, also supporting migration
interface (Shameer Kolothum, Longfang Liu)
- D3hot fixes for vfio-pci-core (Abhishek Sahu)
- Document new vfio-pci variant driver acceptance criteria
(Alex Williamson)
- Fix UML build unresolved ioport_{un}map() functions
(Alex Williamson)
- Fix MAINTAINERS due to header movement (Lukas Bulwahn)
-----BEGIN PGP SIGNATURE-----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=Sv96
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Introduce new device migration uAPI and implement device specific
mlx5 vfio-pci variant driver supporting new protocol (Jason
Gunthorpe, Yishai Hadas, Leon Romanovsky)
- New HiSilicon acc vfio-pci variant driver, also supporting migration
interface (Shameer Kolothum, Longfang Liu)
- D3hot fixes for vfio-pci-core (Abhishek Sahu)
- Document new vfio-pci variant driver acceptance criteria
(Alex Williamson)
- Fix UML build unresolved ioport_{un}map() functions
(Alex Williamson)
- Fix MAINTAINERS due to header movement (Lukas Bulwahn)
* tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio: (31 commits)
vfio-pci: Provide reviewers and acceptance criteria for variant drivers
MAINTAINERS: adjust entry for header movement in hisilicon qm driver
hisi_acc_vfio_pci: Use its own PCI reset_done error handler
hisi_acc_vfio_pci: Add support for VFIO live migration
crypto: hisilicon/qm: Set the VF QM state register
hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driver
hisi_acc_vfio_pci: Restrict access to VF dev BAR2 migration region
hisi_acc_vfio_pci: add new vfio_pci driver for HiSilicon ACC devices
hisi_acc_qm: Move VF PCI device IDs to common header
crypto: hisilicon/qm: Move few definitions to common header
crypto: hisilicon/qm: Move the QM header to include/linux
vfio/mlx5: Fix to not use 0 as NULL pointer
PCI/IOV: Fix wrong kernel-doc identifier
vfio/mlx5: Use its own PCI reset_done error handler
vfio/pci: Expose vfio_pci_core_aer_err_detected()
vfio/mlx5: Implement vfio_pci driver for mlx5 devices
vfio/mlx5: Expose migration commands over mlx5 device
vfio: Remove migration protocol v1 documentation
vfio: Extend the device migration protocol with RUNNING_P2P
vfio: Define device migration protocol v2
...
The assumption that the first byte in the module mapping dword is the
module number shouldn't be hard-coded in the driver, but come from
mlx5_ifc structs.
While at it, fix the incorrect width for the 'rx_lane' and 'tx_lane'
fields.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The MCIA register supports either 12 or 32 dwords, use the correct value
by querying the capability from the MCAM register.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for a new SW format version that is implemented by
ConnectX-7.
Except for several differences, the STEv2 is identical to STEv1, so for
most callbacks the STEv2 context struct will call STEv1 functions.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for matching on new field - Internet Header Length (IHL).
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5 FW has changed release_all_pages cap bit by one bit offset to
reflect a fix in the FW flow for release_all_pages. The driver should
use the new bit to ensure it calls release_all_pages only if the FW fix
is there.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
SHAMPO is an RQ / WQ feature, an indication was added to the TIR in the
first place to enforce suitability between connected TIR and RQ, this
enforcement does not exist in current the Firmware implementation and was
redundant in the first place.
Fixes: 83439f3c37 ("net/mlx5e: Add HW-GRO offload")
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
According to HW spec the field "size" should be 16 bits
in bufferx register.
Fixes: e281682bf2 ("net/mlx5_core: HW data structs/types definitions cleanup")
Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Saeed Mahameed says:
====================
mlx5-next 2022-22-02
The following PR includes updates to mlx5-next branch:
Headlines:
==========
1) Jakub cleans up unused static inline functions
2) I did some low level firmware command interface return status changes to
provide the caller with full visibility on the error/status returned by
the Firmware.
3) Use the new command interface in RDMA DEVX usecases to avoid flooding
dmesg with some "expected" user error prone use cases.
4) Moshe also uses the new command interface to grab the specific error
code from MFRL register command to provide the exact error reason for
why SW reset couldn't perform internally in FW.
5) From Mark Bloch: Lag, drop packets in hardware when possible
In active-backup mode the inactive interface's packets are dropped by the
bond device. In switchdev where TC rules are offloaded to the FDB
this can lead to packets being hit in the FDB where without offload
they would have been dropped before reaching TC rules in the kernel.
Create a drop rule to make sure packets on inactive ports are dropped
before reaching the FDB.
Listen on NETDEV_CHANGEUPPER / NETDEV_CHANGEINFODATA events and record
the inactive state and offload accordingly.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add clarification on sync reset failure
net/mlx5: Add reset_state field to MFRL register
RDMA/mlx5: Use new command interface API
net/mlx5: cmdif, Refactor error handling and reporting of async commands
net/mlx5: Use mlx5_cmd_do() in core create_{cq,dct}
net/mlx5: cmdif, Add new api for command execution
net/mlx5: cmdif, cmd_check refactoring
net/mlx5: cmdif, Return value improvements
net/mlx5: Lag, offload active-backup drops to hardware
net/mlx5: Lag, record inactive state of bond device
net/mlx5: Lag, don't use magic numbers for ports
net/mlx5: Lag, use local variable already defined to access E-Switch
net/mlx5: E-switch, add drop rule support to ingress ACL
net/mlx5: E-switch, remove special uplink ingress ACL handling
net/mlx5: E-Switch, reserve and use same uplink metadata across ports
net/mlx5: Add ability to insert to specific flow group
mlx5: remove unused static inlines
====================
Link: https://lore.kernel.org/r/20220223233930.319301-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new field reset_state to MFRL register. This field expose current
state of sync reset for fw update. This field enables sharing with the
user more details on why fw activate failed in case it failed the sync
reset stage.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
struct mlx5_ifc_modify_tir_bitmask_bits is used for the bitmask
of MODIFY_TIR operations.
Remove the unused bitmask enums.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When modifying TTL, packet's csum has to be recalculated.
Due to HW issue in ConnectX-5, csum recalculation for modify TTL
is supported through a work-around that is specifically enabled
by configuration.
If the work-around isn't enabled, ignore the modify TTL action
rather than adding an unsupported action.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Match on geneve_tlv_option_0_exist field on devices that support STEv1.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Add support for misc5 match parameter as per HW spec, this will allow
matching on tunnel_header fields.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Macros prefix should be capital letters - fix the prefix in
mlx5_FLEX_PARSER_MPLS_OVER_UDP_ENABLED.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Saeed Mahameed says:
====================
mlx5-next branch 2021-12-15
Hi Dave, Jakub, Jason
This pulls mlx5-next branch into net-next and rdma branches.
All patches already reviewed on both rdma and netdev mailing lists.
Please pull and let me know if there's any problem.
1) Add multiple FDB steering priorities [1]
2) Introduce HW bits needed to configure MAC list size of VF/SF.
Required for ("net/mlx5: Memory optimizations") upcoming series [2].
[1] https://lore.kernel.org/netdev/20211201193621.9129-1-saeed@kernel.org/
[2] https://lore.kernel.org/lkml/20211208141722.13646-1-shayd@nvidia.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Downstream patch will use this bit in order to know whether the device
supports changing of max_uc_list.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Validate MRTC register is supported before triggering a delayed work
which accesses it.
Fixes: 5a1023deee ("net/mlx5: Add periodic update of host time to firmware")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This series introduces new packet merge type, therefore rename lro
functions to packet merge to support the new merge type:
- Generalize + rename mlx5e_build_tir_ctx_lro to
mlx5e_build_tir_ctx_packet_merge.
- Rename mlx5e_modify_tirs_lro to mlx5e_modify_tirs_packet_merge.
- Rename lro bit in mlx5_ifc_modify_tir_bitmask_bits to packet_merge.
- Rename lro_en in mlx5e_params to packet_merge_type type and combine
packet_merge params into one struct mlx5e_packet_merge_param.
Signed-off-by: Khalid Manaa <khalidm@nvidia.com>
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This commit adds SHAMPO bit to hca_cap and SHAMPO capabilities structure,
SHAMPO related HW spec hardware fields and enumerations.
SHAMPO stands for: split headers and merge payload offload.
SHAMPO new fields:
WQ:
- headers_mkey: mkey that represents the headers buffer, where the packets
headers will be written by the HW.
- shampo_enable: flag to verify if the WQ supports SHAMPO feature.
- log_reservation_size: the log of the reservation size where the data of
the packet will be written by the HW.
- log_max_num_of_packets_per_reservation: log of the maximum number of
packets that can be written to the same reservation.
- log_headers_entry_size: log of the header entry size of the headers buffer.
- log_headers_buffer_entry_num: log of the entries number of the headers buffer.
RQ:
- shampo_no_match_alignment_granularity: the HW alignment granularity
in case the received packet doesn't match the current session.
- shampo_match_criteria_type: the type of match criteria.
- reservation_timeout: the maximum time that the HW will hold the
reservation.
mlx5_ifc_shampo_cap_bits, the capabilities of the SHAMPO feature:
- shampo_log_max_reservation_size: the maximum allowed value of the field
WQ.log_reservation_size.
- log_reservation_size: the minimum allowed value of the field
WQ.log_reservation_size.
- shampo_min_mss_size: the minimum payload size of packet that can open
a new session or be merged to a session.
- shampo_max_log_headers_entry_size: the maximum allowed value of the field
WQ.log_headers_entry_size
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
TIR stands for transport interface receive, the TIR object is
responsible for performing all transport related operations on
the receive side like packet processing, demultiplexing the packets
to different RQ's, etc.
lro_timeout is a field in the TIR that is used to set the timeout for lro
session, this series introduces new packet merge type, therefore rename
lro_timeout to packet_merge_timeout for all packet merge types.
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
revert commit 46ae40b94d ("net/mlx5: Let user configure io_eq_size param")
revert commit a6cb08daa3 ("net/mlx5: Let user configure event_eq_size param")
revert commit 5546040619 ("net/mlx5: Let user configure max_macs param")
The EQE parameters are applicable to more drivers, they should
be configured via standard API, probably ethtool. Example of
another driver needing something similar:
https://lore.kernel.org/all/1633454136-14679-3-git-send-email-sbhatta@marvell.com/
The last param for "max_macs" is probably fine but the documentation
is severely lacking. The meaning and implications for changing the
param need to be stated.
Link: https://lore.kernel.org/r/20211026152939.3125950-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, max_macs is taking 70Kbytes of memory per function. This
size is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the number of max_macs.
For example, to reduce the number of max_macs to 1, execute::
$ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \
cmode driverinit
$ devlink dev reload pci/0000:00:0b.0
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Firmware logs its asserts also to non-volatile memory. In order to
reduce drift between the NIC and the host, the driver sets the host
epoch-time to the firmware every hour.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
A small series to clean up the mlx5 mkey code across the mlx5_core and
InfiniBand.
* branch 'mlx5_mkey':
RDMA/mlx5: Attach ndescs to mlx5_ib_mkey
RDMA/mlx5: Move struct mlx5_core_mkey to mlx5_ib
RDMA/mlx5: Replace struct mlx5_core_mkey by u32 key
RDMA/mlx5: Remove pd from struct mlx5_core_mkey
RDMA/mlx5: Remove size from struct mlx5_core_mkey
RDMA/mlx5: Remove iova from struct mlx5_core_mkey
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The uplink destination type should be used in rules to steer the
packet to the uplink when the device is in steering based LAG mode.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Introduce new APIs to create and destroy flow matcher
for given format id.
Flow match definer object is used for defining the fields and
mask used for the hash calculation. User should mask the desired
fields like done in the match criteria.
This object is assigned to flow group of type hash. In this flow
group type, packets lookup is done based on the hash result.
This patch also adds the required bits to create such flow group.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add new port selection flow steering namespace. Flow steering rules in
this namespaceare are used to determine the physical port for egress
packets.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, when a user disables roce via the devlink param, this change
isn't passed down to the device.
If device allows disabling RoCE at device level, make use of it. This
instructs the device to skip memory allocations related to RoCE
functionality which otherwise is done by the device.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add needed structures and defines for DTOR (default timeouts register).
This will be used to get timeouts values from FW instead of hard coded
values in the driver code thus enabling support for slower devices which
need longer timeouts.
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Due to current HW arch limitations, RX-FCS (scattering FCS frame field
to software) and RX-port-timestamp (improved timestamp accuracy on the
receive side) can't work together.
RX-port-timestamp is not controlled by the user and it is enabled by
default when supported by the HW/FW.
This patch sets RX-port-timestamp opposite to RX-FCS configuration.
Fixes: 102722fc68 ("net/mlx5e: Add support for RXFCS feature flag")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Adding bth_opcode field and the relevant bits. This field will be used
to capture and count congestion notification packets (CNP).
Adding source_vhca_port support bit.
This field will be used to check the capability to use the
source_vhca_port as a match criteria in cases of dual port.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Add uid field to mlx5_ifc_alloc_uar_in_bits and
mlx5_ifc_dealloc_uar_out_bits structs.
This field will be used by FW to manage UAR according to uid.
Signed-off-by: Meir Lichtinger <meirl@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Extend eswitch API with rate limiting groups:
- Define new struct mlx5_esw_rate_group that is used to hold all
internal group data.
- Implement functions that allow creation, destruction and cleanup of
groups.
- Assign all vports to internal unlimited zero group by default.
This commit lays the groundwork for group rate limiting by implementing
devlink_ops->rate_node_{new|del}() callbacks to support creating and
deleting groups through devlink rate node objects. APIs that allows
setting rates and adding/removing members are implemented in following
patches.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Saeed Mahameed says:
====================
pull-request: mlx5-next 2020-08-9
This pulls mlx5-next branch which includes patches already reviewed on
net-next and rdma mailing lists.
1) mlx5 single E-Switch FDB for lag
2) IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
3) Add DCS caps & fields support
[1] https://patchwork.kernel.org/project/netdevbpf/cover/20210803231959.26513-1-saeed@kernel.org/
[2] https://patchwork.kernel.org/project/netdevbpf/patch/0e3364dab7e0e4eea5423878b01aa42470be8d36.1626609184.git.leonro@nvidia.com/
[3] https://patchwork.kernel.org/project/netdevbpf/patch/55e1d69bef1fbfa5cf195c0bfcbe35c8019de35e.1624258894.git.leonro@nvidia.com/
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Lag, Create shared FDB when in switchdev mode
net/mlx5: E-Switch, add logic to enable shared FDB
net/mlx5: Lag, move lag destruction to a workqueue
net/mlx5: Lag, properly lock eswitch if needed
net/mlx5: Add send to vport rules on paired device
net/mlx5: E-Switch, Add event callback for representors
net/mlx5e: Use shared mappings for restoring from metadata
net/mlx5e: Add an option to create a shared mapping
net/mlx5: E-Switch, set flow source for send to uplink rule
RDMA/mlx5: Add shared FDB support
{net, RDMA}/mlx5: Extend send to vport rules
RDMA/mlx5: Fill port info based on the relevant eswitch
net/mlx5: Lag, add initial logic for shared FDB
net/mlx5: Return mdev from eswitch
IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
net/mlx5: Add DCS caps & fields support
====================
Link: https://lore.kernel.org/r/20210809202522.316930-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit does a cleanup in LRO configuration.
LRO is a parameter of an RQ, but its state is changed by modifying a TIR
related to the RQ.
The current status: LRO for tunneled packets is not supported in the
driver, inner TIRs may enable LRO on creation, but LRO status of inner
TIRs isn't changed in mlx5e_modify_tirs_lro(). This is inconsistent, but
as long as the firmware doesn't declare support for tunneled LRO, it
works, because the same RQs are shared between the inner and outer TIRs.
This commit does two fixes:
1. If the firmware has the tunneled LRO capability, LRO is blocked
altogether, because it's not possible to block it for inner TIRs only,
when the same RQs are shared between inner and outer TIRs, and the
driver won't be able to handle tunneled LRO traffic.
2. mlx5e_modify_tirs_lro() is patched to modify LRO state for all TIRs,
including inner ones, because all TIRs related to an RQ should agree on
their LRO state.
Fixes: 7b3722fa9e ("net/mlx5e: Support RSS for GRE tunneled packets")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
is_apu_thread_cq() used to detect CQs which are attached to APU
threads. This was extended to support other elements as well,
so the function was renamed to is_apu_cq().
c_eqn_or_apu_element was extended from 8 bits to 32 bits, which wan't
reflected when the APU support was first introduced.
Acked-by: Michael S. Tsirkin <mst@redhat.com> # vdpa
Signed-off-by: Tal Gilboa <talgi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
This fields will be needed when adding a support for DCS offload
max_dci_stream_channels - maximum DCI stream channels supported per DCI.
max_dci_errored_streams - maximum DCI error stream channels
supported per DCI before a DCI move to error state.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Currently all resources must be created with uid != 0 which is essential
when userspace processes are allocating virtquueue resources. Since this
is a kernel implementation, it is perfectly legal to open resources with
uid == 0.
In case firmware supports, avoid allocating user context.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210531160404.31368-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This PR contains a replacement driver for Intel iWarp hardware. This new
driver supports the old ethernet hardware and also newer chips that can do
ROCE. Otherwise this contains the typical mix of patches:
- Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
- Many static checker driven code clean ups, including a wide refcount_t
conversion
- Several series for the hns driver, more HIP09 HW capabilities, migration
to new HW register manipulators, and code cleanups
- Minor fixes and improvements in srp, rts, and cm
- Improvements throughout for sysfs related code to use DEVICE_ATTR_*,
make the ib_port sysfs first-class, and overall use sysfs APIs properly
- Intel's new irdma driver replacing i40iw
- rxe general clean ups and Memory Window support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAmDcunQACgkQOG33FX4g
mxqSBA//dsZi/UzpzgU+YqyMFmUp04wd2/iCYzOcCViNPQZCyCARbGaMXI4kMa4s
8dM5xU76OnCuNSnXHaIwvHC3CdN9GUm08j9eWY7syvAiKtXCjzv7qmCVfBw35UyK
IXKfXh57toTSSAIfxw8yKc97QgaDSJ2zQ34fXkoE0AvTlfyN6pHQe9ef/Ca0ejS4
awUGYVG/oilLXrEHcSSAv5UoX6hOUje6jqqRgp5jmZTI3g7SlIPL8mWgXBkHAYmd
kDX7lBd09CKo2bmR071/kF6xUzvbCg1tmeE6lZze7gE+aKlBkZcvCBe1RAh3sBzK
ysLfON5GGw5qnkMaY8j5h3sgWvi3qTTEW+jCAmmVi/6z4PF47mvmVVn+/pZc3y2e
PqH43cunhwS0KuoUJ5Sd48J/UvabrvdbCNZrjCGCpt45EF4VwKxYMh74Bf0ABEQS
i9eKR/+wyHG6Uv1U37fIXsqa8yUttl9aV/s88s8irn4xhG8ygBLZgeVQNeGUfvdV
1W0XLEjRmKFezC1FhiPOz7CLIgL3BfSU1V+S7p0Gvb6ijZqyZTfRUaWbaD3KJpRT
1kwzE4qp6IbJMEqgQH/lq0xBzvzF48FPvBslX5kwlm0phQRrMCwMVIafutpu395q
ySeStEvsTVfz/JUHL3ZaEJyTRjAvPL0lXLH80XUpgWk9GzsksOM=
=wyqt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This contains a replacement driver for Intel iWarp hardware. This new
driver supports the old ethernet hardware and also newer chips that
can do ROCE.
Other than that, this contains the typical mix of patches:
- Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
- Many static checker driven code clean ups, including a wide
refcount_t conversion
- Several series for the hns driver, more HIP09 HW capabilities,
migration to new HW register manipulators, and code cleanups
- Minor fixes and improvements in srp, rts, and cm
- Improvements throughout for sysfs related code to use
DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use
sysfs APIs properly
- Intel's new irdma driver replacing i40iw
- rxe general clean ups and Memory Window support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits)
RDMA/core: Always release restrack object
RDMA/mlx5: Don't access NULL-cleared mpi pointer
RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles
RDMA/irdma: Check contents of user-space irdma_mem_reg_req object
RDMA/rxe: Missing unlock on error in get_srq_wqe()
RDMA/cma: Fix rdma_resolve_route() memory leak
RDMA/core/sa_query: Remove unused argument
RDMA/cma: Fix incorrect Packet Lifetime calculation
RDMA/cma: Protect RMW with qp_mutex
RDMA/cma: Remove unnecessary INIT->INIT transition
RDMA/hns: Add window selection field of congestion control
RDMA/hfi1: Remove use of kmap()
RDMA/irdma: Remove use of kmap()
RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1
IB/isert: Align target max I/O size to initiator size
RDMA/hns: Fix incorrect vlan enable bit in QPC
MAINTAINERS: Update Broadcom RDMA maintainers
RDMA/irdma: Use the queried port attributes
RDMA/rxe: Fix redundant skb_put_zero
RDMA/rxe: Fix extra copy in prepare_ack_packet
...
QPC, SQC and RQC timestamp formats and capabilities are always equal
because they represent general hardware support. So instead of code
duplication, let's merge them into general enum and logic.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
FW is now supporting more than 256 MSI-X per PF (up to 2K).
Hence, enlarge interrupt field in CREATE_EQ to make use of the new
MSI-X's.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for HCA caps 2 that contains capabilities for the new
insert/remove header actions.
Added the required definitions for supporting the new reformat type:
added packet reformat parameters, reformat anchors and definitions
to allow copy/set into the inserted EMD (Embedded MetaData) tag.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Flow table that contains flow pointing to multiple flow tables or multiple
TIRs must have a level lower than 64. In our case it applies to muli-
destination flow table.
Fix the level of the created table to comply with HW Spec definitions, and
still make sure that its level lower than SW-owned tables, so that it
would be possible to point from the multi-destination FW table to SW
tables.
Fixes: 34583beea4 ("net/mlx5: DR, Create multi-destination table for SW-steering use")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
