The VT-d spec requires (10.4.4 Global Command Register, TE field) that:
Hardware implementations supporting DMA draining must drain any in-flight
DMA read/write requests queued within the Root-Complex before completing
the translation enable command and reflecting the status of the command
through the TES field in the Global Status register.
Unfortunately, some integrated graphic devices fail to do so after some
kind of power state transition. As the result, the system might stuck in
iommu_disable_translation(), waiting for the completion of TE transition.
This provides a quirk list for those devices and skips TE disabling if
the qurik hits.
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=208363
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206571
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Koba Ko <koba.ko@canonical.com>
Tested-by: Jun Miao <jun.miao@windriver.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200723013437.2268-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After page requests are handled, software must respond to the device
which raised the page request with the result. This is done through
the iommu ops.page_response if the request was reported to outside of
vendor iommu driver through iommu_report_device_fault(). This adds the
VT-d implementation of page_response ops.
Co-developed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Co-developed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200724014925.15523-12-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is refactored in two ways:
- Make it global so that it could be used in other files.
- Make bus/devfn optional so that callers could ignore these two returned
values when they only want to get the coresponding iommu pointer.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200724014925.15523-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For guest requested IOTLB invalidation, address and mask are provided as
part of the invalidation data. VT-d HW silently ignores any address bits
below the mask. SW shall also allow such case but give warning if
address does not align with the mask. This patch relax the fault
handling from error to warning and proceed with invalidation request
with the given mask.
Fixes: 6ee1b77ba3 ("iommu/vt-d: Add svm/sva invalidate function")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200724014925.15523-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For guest SVA usage, in order to optimize for less VMEXIT, guest request
of IOTLB flush also includes device TLB.
On the host side, IOMMU driver performs IOTLB and implicit devTLB
invalidation. When PASID-selective granularity is requested by the guest
we need to derive the equivalent address range for devTLB instead of
using the address information in the UAPI data. The reason for that is,
unlike IOTLB flush, devTLB flush does not support PASID-selective
granularity. This is to say, we need to set the following in the PASID
based devTLB invalidation descriptor:
- entire 64 bit range in address ~(0x1 << 63)
- S bit = 1 (VT-d CH 6.5.2.6).
Without this fix, device TLB flush range is not set properly for PASID
selective granularity. This patch also merged devTLB flush code for both
implicit and explicit cases.
Fixes: 6ee1b77ba3 ("iommu/vt-d: Add svm/sva invalidate function")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200724014925.15523-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_domain_identity_map() helper takes start/end PFN as arguments.
Fix a misuse case where the start and end addresses are passed.
Fixes: e70b081c6f ("iommu/vt-d: Remove IOVA handling code from the non-dma_ops path")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Tom Murphy <murphyt7@tcd.ie>
Link: https://lore.kernel.org/r/20200622231345.29722-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Scalable-mode Page-walk Coherency (SMPWC) field in the VT-d extended
capability register indicates the hardware coherency behavior on paging
structures accessed through the pasid table entry. This is ignored in
current code and using ECAP.C instead which is only valid in legacy mode.
Fix this so that paging structure updates could be manually flushed from
the cache line if hardware page walking is not snooped.
Fixes: 765b6a98c1 ("iommu/vt-d: Enumerate the scalable mode capability")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, an external malicious PCI device can masquerade the VID:PID
of faulty gfx devices, and thus apply iommu quirks to effectively
disable the IOMMU restrictions for itself.
Thus we need to ensure that the device we are applying quirks to, is
indeed an internal trusted device.
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When using first-level translation for IOVA, currently the U/S bit in the
page table is cleared which implies DMA requests with user privilege are
blocked. As the result, following error messages might be observed when
passing through a device to user level:
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read] Request device [41:00.0] PASID 1 fault addr 7ecdcd000
[fault reason 129] SM: U/S set 0 for first-level translation
with user privilege
This fixes it by setting U/S bit in the first level page table and makes
IOVA over first level compatible with previous second-level translation.
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Reported-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move all files related to the Intel IOMMU driver into its own
subdirectory.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200609130303.26974-3-joro@8bytes.org
2020-06-10 17:46:43 +02:00
Renamed from drivers/iommu/intel-iommu.c (Browse further)
