Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Make Xen PV guest deal with speculative store bypass correctly
- Address more fallout from the 5-Level pagetable handling. Undo an
__initdata annotation to avoid section mismatch and malfunction
when post init code would touch the freed variable.
- Handle exception fixup in math_error() before calling notify_die().
The reverse call order incorrectly triggers notify_die() listeners
for soemthing which is handled correctly at the site which issues
the floating point instruction.
- Fix an off by one in the LLC topology calculation on AMD
- Handle non standard memory block sizes gracefully un UV platforms
- Plug a memory leak in the microcode loader
- Sanitize the purgatory build magic
- Add the x86 specific device tree bindings directory to the x86
MAINTAINER file patterns"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix 'no5lvl' handling
Revert "x86/mm: Mark __pgtable_l5_enabled __initdata"
x86/CPU/AMD: Fix LLC ID bit-shift calculation
MAINTAINERS: Add file patterns for x86 device tree bindings
x86/microcode/intel: Fix memleak in save_microcode_patch()
x86/platform/UV: Add kernel parameter to set memory block size
x86/platform/UV: Use new set memory block size function
x86/platform/UV: Add adjustable set memory block size function
x86/build: Remove unnecessary preparation for purgatory
Revert "kexec/purgatory: Add clean-up for purgatory directory"
x86/xen: Add call of speculative_store_bypass_ht_init() to PV paths
x86: Call fixup_exception() before notify_die() in math_error()
Pull x86 pti fixes from Thomas Gleixner:
"Two small updates for the speculative distractions:
- Make it more clear to the compiler that array_index_mask_nospec()
is not subject for optimizations. It's not perfect, but ...
- Don't report XEN PV guests as vulnerable because their mitigation
state depends on the hypervisor. Report unknown and refer to the
hypervisor requirement"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/spectre_v1: Disable compiler optimizations over array_index_mask_nospec()
x86/pti: Don't report XenPV as vulnerable
Pull ras fixes from Thomas Gleixner:
"A set of fixes for RAS/MCE:
- Improve the error message when the kernel cannot recover from a MCE
so the maximum amount of information gets provided.
- Individually check MCE recovery features on SkyLake CPUs instead of
assuming none when the CAPID0 register does not advertise the
general ability for recovery.
- Prevent MCE to output inconsistent messages which first show an
error location and then claim that the source is unknown.
- Prevent overwriting MCi_STATUS in the attempt to gather more
information when a fatal MCE has alreay been detected. This leads
to empty status values in the printout and failing to react
promptly on the fatal event"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Fix incorrect "Machine check from unknown source" message
x86/mce: Do not overwrite MCi_STATUS in mce_no_way_out()
x86/mce: Check for alternate indication of machine check recovery on Skylake
x86/mce: Improve error message when kernel cannot recover
early_identify_cpu() has to use early version of pgtable_l5_enabled()
that doesn't rely on cpu_feature_enabled().
Defining USE_EARLY_PGTABLE_L5 before all includes does the trick.
I lost the define in one of reworks of the original patch.
Fixes: 372fddf709 ("x86/mm: Introduce the 'no5lvl' kernel parameter")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180622220841.54135-3-kirill.shutemov@linux.intel.com
There is no simple yes/no test to determine if pseudo-locking was
successful. In order to test pseudo-locking we expose a debugfs file for
each pseudo-locked region that will record the latency of reading the
pseudo-locked memory at a stride of 32 bytes (hardcoded). These numbers
will give us an idea of locking was successful or not since they will
reflect cache hits and cache misses (hardware prefetching is disabled
during the test).
The new debugfs file "pseudo_lock_measure" will, when the
pseudo_lock_mem_latency tracepoint is enabled, record the latency of
accessing each cache line twice.
Kernel tracepoints offer us histograms (when CONFIG_HIST_TRIGGERS is
enabled) that is a simple way to visualize the memory access latency
and immediately see any cache misses. For example, the hist trigger
below before trigger of the measurement will display the memory access
latency and instances at each latency:
echo 'hist:keys=latency' > /sys/kernel/debug/tracing/events/resctrl/\
pseudo_lock_mem_latency/trigger
echo 1 > /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_mem_latency/enable
echo 1 > /sys/kernel/debug/resctrl/<newlock>/pseudo_lock_measure
echo 0 > /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_mem_latency/enable
cat /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_mem_latency/hist
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: vikas.shivappa@linux.intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/6b2ea76181099d1b79ccfa7d3be24497ab2d1a45.1529706536.git.reinette.chatre@intel.com
The user requests a pseudo-locked region by providing a schemata to a
resource group that is in the pseudo-locksetup mode. This is the
functionality that consumes the parsed user data and creates the
pseudo-locked region.
First, required information is deduced from user provided data.
This includes, how much memory does the requested bitmask represent,
which CPU the requested region is associated with, and what is the
cache line size of that cache (to learn the stride needed for locking).
Second, a contiguous block of memory matching the requested bitmask is
allocated.
Finally, pseudo-locking is performed. The resource group already has the
allocation that reflects the requested bitmask. With this class of service
active and interference minimized, the allocated memory is loaded into the
cache.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: vikas.shivappa@linux.intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/67391160bbf06143bc62d856d3d234eb152008b7.1529706536.git.reinette.chatre@intel.com
A pseudo-locked region does not have a class of service associated with
it and thus not tracked in the array of control values maintained as
part of the domain. Even so, when the user provides a new bitmask for
another resource group it needs to be checked for interference with
existing pseudo-locked regions.
Additionally only one pseudo-locked region can be created in any cache
hierarchy.
Introduce two utilities in support of above scenarios: (1) a utility
that can be used to test if a given capacity bitmask overlaps with any
pseudo-locked regions associated with a particular cache instance, (2) a
utility that can be used to test if a pseudo-locked region exists within
a particular cache hierarchy.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: vikas.shivappa@linux.intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/b8e31dbdcf22ddf71df46072647b47e7558abb32.1529706536.git.reinette.chatre@intel.com
The user can request entering pseudo-locksetup mode by writing
"pseudo-locksetup" to the mode file. Act on this request as well as
support switching from a pseudo-locksetup mode (before pseudo-locked
mode was entered). It is not supported to modify the mode once
pseudo-locked mode has been entered.
The schemata reflects the new mode by adding "uninitialized" to all
resources. The size resctrl file reports zero for all cache domains in
support of the uninitialized nature. Since there are no users of this
class of service its allocations can be ignored when searching for
appropriate default allocations for new resource groups. For the same
reason resource groups in pseudo-locksetup mode are not considered when
testing if new resource groups may overlap.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: vikas.shivappa@linux.intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/56f553334708022903c296284e62db3bbc1ff150.1529706536.git.reinette.chatre@intel.com
The locksetup mode is the way in which the user communicates that the
resource group will be used for a pseudo-locked region. Locksetup mode
should thus ensure that all restrictions on a resource group are met before
locksetup mode can be entered. The resource group should also be configured
to ensure that it cannot be modified in unsupported ways when a
pseudo-locked region.
Introduce the support where the request for entering locksetup mode can be
validated. This includes: CDP is not active, no cpus or tasks are assigned
to the resource group, monitoring is not in progress on the resource
group. Once the resource group is determined ready for a pseudo-locked
region it is configured to not allow future changes to these properties.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: vikas.shivappa@linux.intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/b120f71ced30116bcc6c6f651e8a7906ae6b903d.1529706536.git.reinette.chatre@intel.com
When a resource group is used for Cache Pseudo-Locking then the region of
cache ends up being orphaned with no class of service referring to it. The
resctrl files intended to manage how the classes of services are utilized
thus become irrelevant.
The fact that a resctrl file is not relevant can be communicated to the
user by setting all of its permissions to zero. That is, its read, write,
and execute permissions are unset for all users.
Introduce two utilities, rdtgroup_kn_mode_restrict() and
rdtgroup_kn_mode_restore(), that can be used to restrict and restore the
permissions of a file or directory belonging to a resource group.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: vikas.shivappa@linux.intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/7afdbf5551b2f93cd45d61fbf5e01d87331f529a.1529706536.git.reinette.chatre@intel.com
By default, if the opener has CAP_DAC_OVERRIDE, a kernfs file can be opened
regardless of RW permissions. Writing to a kernfs file will thus succeed
even if permissions are 0000.
It's required to restrict the actions that can be performed on a resource
group from userspace based on the mode of the resource group. This
restriction will be done through a modification of the file
permissions. That is, for example, if a resource group is locked then the
user cannot add tasks to the resource group.
For this restriction through file permissions to work it has to be ensured
that the permissions are always respected. To do so the resctrl filesystem
is created with the KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK flag that will result
in open(2) failing with -EACCESS regardless of CAP_DAC_OVERRIDE if the
permission does not have the respective read or write access.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: vikas.shivappa@linux.intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/26f4fc25f110bfc07c2d2c8b2c4ee904922fedf7.1529706536.git.reinette.chatre@intel.com
With cache regions now explicitly marked as "shareable" or "exclusive"
we would like to communicate to the user how portions of the cache
are used.
Introduce "bit_usage" that indicates for each resource
how portions of the cache are configured to be used.
To assist the user to distinguish whether the sharing is from software or
hardware we add the following annotation:
0 - currently unused
X - currently available for sharing and used by software and hardware
H - currently used by hardware only but available for software use
S - currently used and shareable by software only
E - currently used exclusively by one resource group
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: vikas.shivappa@linux.intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/105d44c40e582c2b7e2dccf0ae247e5e61137d4b.1529706536.git.reinette.chatre@intel.com
Currently when a new resource group is created its allocations would be
those that belonged to the resource group to which its closid belonged
previously.
That is, we can encounter a case like:
mkdir newgroup
cat newgroup/schemata
L2:0=ff;1=ff
echo 'L2:0=0xf0;1=0xf0' > newgroup/schemata
cat newgroup/schemata
L2:0=0xf0;1=0xf0
rmdir newgroup
mkdir newnewgroup
cat newnewgroup/schemata
L2:0=0xf0;1=0xf0
When the new group is created it would be reasonable to expect its
allocations to be initialized with all regions that it can possibly use.
At this time these regions would be all that are shareable by other
resource groups as well as regions that are not currently used.
If the available cache region is found to be non-contiguous the
available region is adjusted to enforce validity.
When a new resource group is created the hardware is initialized with
these new default allocations.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: vikas.shivappa@linux.intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/c468ed79340b63024111978e01430bb9589d85c0.1529706536.git.reinette.chatre@intel.com
The current logic incorrectly calculates the LLC ID from the APIC ID.
Unless specified otherwise, the LLC ID should be calculated by removing
the Core and Thread ID bits from the least significant end of the APIC
ID. For more info, see "ApicId Enumeration Requirements" in any Fam17h
PPR document.
[ bp: Improve commit message. ]
Fixes: 68091ee7ac ("Calculate last level cache ID from number of sharing threads")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1528915390-30533-1-git-send-email-suravee.suthikulpanit@amd.com
The TOPOEXT reenablement is a workaround for broken BIOSen which didn't
enable the CPUID bit. amd_get_topology_early(), however, relies on
that bit being set so that it can read out the CPUID leaf and set
smp_num_siblings properly.
Move the reenablement up to early_init_amd(). While at it, simplify
amd_get_topology_early().
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If we don't have MCA banks, we won't see machine checks anyway. Drop the
check.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180622095428.626-5-bp@alien8.de
Carve out the rendezvous handler timeout avoidance check into a separate
function in order to simplify the #MC handler.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180622095428.626-4-bp@alien8.de
The machine check timestamp uses get_seconds(), which returns an
'unsigned long' number that might overflow on 32-bit architectures (in
the distant future) and is therefore deprecated.
The normal replacement would be ktime_get_real_seconds(), but that needs
to use a sequence lock that might cause a deadlock if the MCE happens at
just the wrong moment. The __ktime_get_real_seconds() skips that lock
and is safer here, but has a miniscule risk of returning the wrong time
when we read it on a 32-bit architecture at the same time as updating
the epoch, i.e. from before y2106 overflow time to after, or vice versa.
This seems to be an acceptable risk in this particular case, and is the
same thing we do in kdb.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: y2038@lists.linaro.org
Link: http://lkml.kernel.org/r/20180618100759.1921750-1-arnd@arndb.de
Some injection testing resulted in the following console log:
mce: [Hardware Error]: CPU 22: Machine Check Exception: f Bank 1: bd80000000100134
mce: [Hardware Error]: RIP 10:<ffffffffc05292dd> {pmem_do_bvec+0x11d/0x330 [nd_pmem]}
mce: [Hardware Error]: TSC c51a63035d52 ADDR 3234bc4000 MISC 88
mce: [Hardware Error]: PROCESSOR 0:50654 TIME 1526502199 SOCKET 0 APIC 38 microcode 2000043
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
Kernel panic - not syncing: Machine check from unknown source
This confused everybody because the first line quite clearly shows
that we found a logged error in "Bank 1", while the last line says
"unknown source".
The problem is that the Linux code doesn't do the right thing
for a local machine check that results in a fatal error.
It turns out that we know very early in the handler whether the
machine check is fatal. The call to mce_no_way_out() has checked
all the banks for the CPU that took the local machine check. If
it says we must crash, we can do so right away with the right
messages.
We do scan all the banks again. This means that we might initially
not see a problem, but during the second scan find something fatal.
If this happens we print a slightly different message (so I can
see if it actually every happens).
[ bp: Remove unneeded severity assignment. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org # 4.2
Link: http://lkml.kernel.org/r/52e049a497e86fd0b71c529651def8871c804df0.1527283897.git.tony.luck@intel.com
mce_no_way_out() does a quick check during #MC to see whether some of
the MCEs logged would require the kernel to panic immediately. And it
passes a struct mce where MCi_STATUS gets written.
However, after having saved a valid status value, the next iteration
of the loop which goes over the MCA banks on the CPU, overwrites the
valid status value because we're using struct mce as storage instead of
a temporary variable.
Which leads to MCE records with an empty status value:
mce: [Hardware Error]: CPU 0: Machine Check Exception: 6 Bank 0: 0000000000000000
mce: [Hardware Error]: RIP 10:<ffffffffbd42fbd7> {trigger_mce+0x7/0x10}
In order to prevent the loss of the status register value, return
immediately when severity is a panic one so that we can panic
immediately with the first fatal MCE logged. This is also the intention
of this function and not to noodle over the banks while a fatal MCE is
already logged.
Tony: read the rest of the MCA bank to populate the struct mce fully.
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180622095428.626-8-bp@alien8.de
