All thoses headers are not used by any source files.
Lets just remove them.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As auto power profile mode still not support on vega10, so
just restore default profile mode in auto dpm level.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can change power limit between
[0, 1] * max power limit.
Set power limit to 0, restore to max power limit.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The double parentheses are not needed. Removing them fixes the following
warning when building with clang:
drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c:419:29:
error: equality comparison with extraneous parentheses
[-Werror,-Wparentheses-equality]
if ((data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2)) {
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In several locations the driver uses AMD_CG_STATE_UNGATE (type enum
amd_clockgating_state) instead of AMD_PG_STATE_UNGATE (type enum
amd_powergating_stat) and vice versa. Both constants have the same
value, so this doesn't cause any problems, but we still want to pass
the correct type.
Fixing the mismatch resolves multiple warnings like this when building
with clang:
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/cz_clockpowergating.c:169:7:
error: implicit conversion from enumeration type 'enum
amd_powergating_state' to different enumeration type 'enum
amd_clockgating_state' [-Werror,-Wenum-conversion]
AMD_PG_STATE_UNGATE);
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
new generic interface is added in powerplay.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhub PG is enabled by SMU FW only for Raven.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We deleted some code in e154162ef7 ("drm/amd/powerplay: refine pp code
for raven") but there were a few related bits that were missed. Let's
delete them as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since 12 of the 16 bytes are not initialized with anything let's ensure they're
sensibly zeroed out otherwise debugfs callers will read back garbage
(because they assume debugfs wrote sensible data back...)
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when echo "01">pp_dpm_pcie
the pcie dpm will fix in highest link speed.
But user should expect auto speed between
level 0 and level1
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only user enter manual performance mode, driver allow user
configure the sclk/mclk dpm parameters through sysfs
pp_power_profile_mode.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only when user set manual performance mode, driver
enable pp_dpm_force_clock_level.
so check the mode in pp_dpm_force_clock_level,
and delete the same logic in callback functions.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The trailing semicolon is an empty statement that does no operation.
Removing the two instances of them since they don't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is also supported with the read_sensor API and there
were no more users of the get_temperature API.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in populate_single_graphic_level for smu7
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move configurable profiling parameters to struct
profile_mode_setting and initialize current_profile_setting.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As not support per DPM level optimization,
so delete activity_target array.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And not support perDPM level optimization on Polaris, so
delete sclk activity_target array.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when Overdrive voltage, need to disable AVFS.
when OverDriv engine clock, need to recalculate
AVFS voltage by disable/enable avfs feature.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete old OD type code path when populate clk.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: - check clk against OverDrive limits from VBIOS
- set OD flag when user commit the setting.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not supported on APUs or Iceland.
and still not enabled on CI.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check vbios to determine whether we can enable OD
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add odn_edit_dpm_table function
points for setting user assigned clock/voltage.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial infrastructure for manual dpm control.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when this bit was set on module load,
driver will allow the user over/under gpu
clock and voltage through sysfs.
by default, this bit was not set.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
abbreviate variable name number_of_performance_levels
to num_of_pl in struct phm_odn_clock_levels
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The additional output are: PSTATE_SCLK and PSTATE_MCLK value
in MHz as:
300 MHz (PSTATE_SCLK)
300 MHz (PSTATE_MCLK)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can use to calculate profiling ratios when
set UMD Pstate.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: delete uncessary blank line.
Add static const modifiers to an array
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setup smio table(smio registers's address and voltage ID)
for various voltage domain.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Store the voltage regulator configuration
so we can properly query the voltage
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Store the voltage regulator configuration,
so we can properly query the voltage.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
show mclk info as in MHz on Cz/St as
0: 333Mhz *
1: 800Mhz
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2: reuse the SMUThermal structure defined in pp_thermal.h
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2: move the SMU7Thermal structure to newly created header file
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2: new header file to hold the common SMU7Thermal structure
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Populate the hwmon temp range as part of thermal controller setup.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added a new callback for asic specific backends to specify the temperature ranges.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
