mirror of
https://gitee.com/bianbu-linux/linux-6.6
synced 2025-04-26 14:17:26 -04:00
ec031ac479
For the SDIO driver, the RESET/ENABLE pins of WILC1000 are controlled through the SDIO power sequence driver. This commit adds analogous support for the SPI driver. Specifically, during initialization, the chip will be ENABLEd and taken out of RESET and during deinitialization, the chip will be placed back into RESET and disabled (both to reduce power consumption and to ensure the WiFi radio is off). Both RESET and ENABLE GPIOs are optional. However, if the ENABLE GPIO is specified, then the RESET GPIO should normally also be specified as otherwise there is no way to ensure proper timing of the ENABLE/RESET sequence. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211221212531.4011609-2-davidm@egauge.net |
||
|---|---|---|
| .. | ||
| cfg80211.c | ||
| cfg80211.h | ||
| fw.h | ||
| hif.c | ||
| hif.h | ||
| Kconfig | ||
| Makefile | ||
| mon.c | ||
| netdev.c | ||
| netdev.h | ||
| sdio.c | ||
| spi.c | ||
| wlan.c | ||
| wlan.h | ||
| wlan_cfg.c | ||
| wlan_cfg.h | ||
| wlan_if.h | ||