bianbu-linux-6.6/include/linux/spi/libertas_spi.h
Colin McCabe d2b21f1917 libertas: if_spi, driver for libertas GSPI devices
Add initial support for libertas devices using a GSPI interface.  This has
been tested with the 8686.

GSPI is intended to be used on embedded systems. Board-specific parameters are
required (see libertas_spi.h).

Thanks to everyone who took a look at the earlier versions of the patch.

Signed-off-by: Colin McCabe <colin@cozybit.com>
Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 16:00:19 -05:00

25 lines
823 B
C

/*
* board-specific data for the libertas_spi driver.
*
* Copyright 2008 Analog Devices Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#ifndef _LIBERTAS_SPI_H_
#define _LIBERTAS_SPI_H_
struct libertas_spi_platform_data {
/* There are two ways to read data from the WLAN module's SPI
* interface. Setting 0 or 1 here controls which one is used.
*
* Usually you want to set use_dummy_writes = 1.
* However, if that doesn't work or if you are using a slow SPI clock
* speed, you may want to use 0 here. */
u16 use_dummy_writes;
/* GPIO number to use as chip select */
u16 gpio_cs;
};
#endif