Emil Tantilov ffefa9f64c ixgbe: fix setting of TXDCTL.WTRHESH when ITR is set to 0 and no BQL ... This patch consolidates the logic behind dynamically setting TXDCTL.WTHRESH depending on interrupt throttle rate (ITR) setting regardless of BQL. Previously TXDCTL.WTHRESH was dynamically being set only with BQL being enabled, but we have to set it regardless of BQL when ITR is low to avoid Tx stalls/hangs. CC: John Greene <jogreene@redhat.com> Reported by: Masayuki Gouji <gouji.masayuki@jp.fujitsu.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>		2014-10-02 02:17:42 -07:00
..
ixgbe.h	ixgbe: remove IXGBE_FLAG_MSI(X)_CAPABLE flags	2014-09-18 04:50:37 -07:00
ixgbe_82598.c	ixgbe: Make return values more direct	2014-07-25 19:58:36 -07:00
ixgbe_82599.c	ixgbe: Make return values more direct	2014-07-25 19:58:36 -07:00
ixgbe_common.c	ixgbe: Make return values more direct	2014-07-25 19:58:36 -07:00
ixgbe_common.h	ixgbe: clean up checkpatch warnings about CODE_INDENT and LEADING_SPACE	2014-05-23 05:24:04 -07:00
ixgbe_dcb.c	ixgbe: Make return values more direct	2014-07-25 19:58:36 -07:00
ixgbe_dcb.h	IXGBE: Set the SW prio_tc values at initialization to the HW setting.	2013-05-21 03:14:21 -07:00
ixgbe_dcb_82598.c	ixgbe: convert low_water into an array	2014-04-22 23:07:11 -07:00
ixgbe_dcb_82598.h	ixgbe: update date to 2013	2013-02-05 01:44:13 -08:00
ixgbe_dcb_82599.c	ixgbe: convert low_water into an array	2014-04-22 23:07:11 -07:00
ixgbe_dcb_82599.h	ixgbe: clean up checkpatch warnings about CODE_INDENT and LEADING_SPACE	2014-05-23 05:24:04 -07:00
ixgbe_dcb_nl.c	ixgbe: Make return values more direct	2014-07-25 19:58:36 -07:00
ixgbe_debugfs.c	ixgbe: don't check NULL for debugfs_remove_recursive	2014-05-23 05:28:24 -07:00
ixgbe_ethtool.c	ixgbe: fix setting of TXDCTL.WTRHESH when ITR is set to 0 and no BQL	2014-10-02 02:17:42 -07:00
ixgbe_fcoe.c	ixgbe: Make return values more direct	2014-07-25 19:58:36 -07:00
ixgbe_fcoe.h	ixgbe: convert low_water into an array	2014-04-22 23:07:11 -07:00
ixgbe_lib.c	ixgbe: add warnings for other disabled features without MSI-X support	2014-09-18 04:42:48 -07:00
ixgbe_main.c	ixgbe: fix setting of TXDCTL.WTRHESH when ITR is set to 0 and no BQL	2014-10-02 02:17:42 -07:00
ixgbe_mbx.c	ixgbe: Make return values more direct	2014-07-25 19:58:36 -07:00
ixgbe_mbx.h	ixgbe: clean up checkpatch warnings about CODE_INDENT and LEADING_SPACE	2014-05-23 05:24:04 -07:00
ixgbe_phy.c	ixgbe: remove wait loop on autoneg for copper devices	2014-10-02 02:11:13 -07:00
ixgbe_phy.h	ixgbe: clean up checkpatch warnings about CODE_INDENT and LEADING_SPACE	2014-05-23 05:24:04 -07:00
ixgbe_ptp.c	ixgbe: change PTP NSECS_PER_SEC to IXGBE_PTP_PPS_HALF_SECOND	2014-07-01 02:48:39 -07:00
ixgbe_sriov.c	ixgbe: limit combined total of macvlan and SR-IOV VFs	2014-09-04 01:38:33 -07:00
ixgbe_sriov.h	net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool.	2014-05-23 15:04:02 -04:00
ixgbe_sysfs.c	ixgbe: add Linux NICS mailing list to contact info	2014-03-12 19:05:30 -07:00
ixgbe_type.h	ixgbe: reset interface on link loss with pending Tx work from the VF	2014-09-04 01:38:32 -07:00
ixgbe_x540.c	ixgbe: Make return values more direct	2014-07-25 19:58:36 -07:00
Makefile	ixgbe: update date to 2013	2013-02-05 01:44:13 -08:00