The purpose of those assigned-clock-* properties is to configure clock for
for the I2S device so move them to respective node.
This suppresses the dtbs_check warning:
arch/arm/boot/dts/exynos5422-odroidxu3.dt.yaml: sound: 'clocks' is a dependency of 'assigned-clocks'
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Device tree schema expects NAND controller to be named
"nand-controller", otherwise dtbs_check complain with a warning like:
arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dt.yaml: gpmi-nand@8000c000:
$nodename:0: 'gpmi-nand@8000c000' does not match '^nand-controller(@.*)?'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Like the other i-MX devices the i.MX6 family can output the enet tx
clock on the pad to feed the connected device. Add the missing clk here
to avoid local fixups like: arch/arm/boot/dts/imx6qdl-tx6.dtsi.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The common imx6qdl.dtsi already defines the iomuxc phandle. Make use of
it in the imx6dl.dtsi and imx6q.dtsi.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The pad QSPI1B_SCLK mux mode 0x1 is for function UART3_DTE_TX,
correct the mux mode.
Fixes: 743636f25f ("ARM: dts: imx: add pin function header for imx6sx")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds a devicetree for the Tolino Shine 2 HD Ebook reader. It is based
on boards marked with "37NB-E60QF0+4A2". It is equipped with an i.MX6SL
SoC.
Expected to work:
- Buttons
- Wifi
- Touchscreen
- LED
- uSD
- USB
- RTC
Not working due to missing drivers:
- Backlight (requires NTXEC driver)
- EPD
Not working due to unknown reasons:
- deep sleep (echo standby >/sys/power/state works),
wakeup fails when imx_gpc_pre_suspend(true) was called.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the five IPMMU instances found in the r8a7742 to DT with a disabled
status.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200825141805.27105-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the 32 kHz clock from S2MPS11 PMIC in the S3C RTC node. Except
making the S3C RTC working, this also fixes dtbs_check warnings:
arch/arm/boot/dts/exynos5420-smdk5420.dt.yaml: rtc@101e0000: clocks: [[2, 317]] is too short
arch/arm/boot/dts/exynos5420-smdk5420.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-14-krzk@kernel.org
Add the five IPMMU instances found in the r8a7742 to DT with a disabled
status.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Link: https://lore.kernel.org/r/20200825141805.27105-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The pin configuration of Display Port HPD GPIO emds with '-gpio' which
confuses dtschema:
arch/arm/boot/dts/exynos5250-spring.dt.yaml: pinctrl@11400000: dp-hpd-gpio:
{'samsung,pins': ['gpc3-0'], ... 'samsung,pin-drv': [[0]], 'phandle': [[23]]} is not of type 'array'
From schema: lib/python3.6/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-11-krzk@kernel.org
Use the 32 kHz clock from S5M8767 PMIC in the S3C RTC node. Except
making the S3C RTC working, this also fixes dtbs_check warnings:
arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short
arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-10-krzk@kernel.org
Add clock-cells to max77686 PMIC node so its 32 kHz clocks could be used
later in the S3C RTC node. Except making the S3C RTC working, this also
fixes dtbs_check warnings:
arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short
arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-9-krzk@kernel.org
Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired. This will lead to run-time errors
that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-8-krzk@kernel.org
The name of I2C controller over GPIO lines node ends with '-gpio' which
confuses dtschema:
arch/arm/boot/dts/exynos5250-arndale.dt.yaml: soc: i2c-gpio:
{'pinctrl-names': ['default'], ... 'phandle': [[65]]} is not of type 'array'
From schema: lib/python3.6/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml
Add a '-10' (there are already 0-9 I2C controllers on the SoC) suffix to
silence it. This pattern on naming i2c-gpio is already present in many
other dts. No functional change.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-6-krzk@kernel.org
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC.
However the PMIC is not described in DTS at all so at least add
a workaround to model its clock with a fixed-clock. This fixes S3C RTC
and silences dtbs_check warnings like:
arch/arm/boot/dts/exynos5410-smdk5410.dt.yaml: rtc@101e0000: clocks: [[5, 317]] is too short
arch/arm/boot/dts/exynos5410-smdk5410.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-5-krzk@kernel.org
The Exynos5260 GIC node does not have any children so remove the address
and size cells as they are not needed by DT bindings. The size-cells of
'0' were also incorrect. This fixes dtbs_check warning:
arch/arm/boot/dts/exynos5260-xyref5260.dt.yaml: interrupt-controller@10481000: #size-cells:0:0: 1 was expected
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-4-krzk@kernel.org
Exynos5260 SoCs have ARM GIC 400. Correct the compatibles to match
dtschema and fix the dtbs_check warnings like:
arch/arm/boot/dts/exynos5260-xyref5260.dt.yaml: interrupt-controller@10481000:
compatible: ['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is not valid under any of the given schemas
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-3-krzk@kernel.org
Exynos5250 and Exynso54xx SoCs have ARM GIC 400. Correct the
compatibles to match dtschema and fix the dtbs_check warnings like:
arch/arm/boot/dts/exynos5420-peach-pit.dt.yaml: interrupt-controller@10481000:
compatible: ['arm,gic-400', 'arm,cortex-a15-gic', 'arm,cortex-a9-gic']
is not valid under any of the given schemas
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-2-krzk@kernel.org
The reg property is mandatory for cpu nodes, also fix the #address-cells of
the cpus node that has to be at least 1.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20200831171129.3886857-2-alexandre.belloni@bootlin.com
Both the Galaxy S and the Fascinate4G have a WM8994 codec, but they
differ slightly in their jack detection and micbias configuration.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC.
However the PMIC is not described in DTS at all so at least add a
workaround to model its clock with fixed-clock. This fixes S3C RTC and
silences dtbs_check warnings like:
arch/arm/boot/dts/exynos4412-tiny4412.dt.yaml: rtc@10070000: clocks: [[7, 346]] is too short
arch/arm/boot/dts/exynos4412-tiny4412.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-32-krzk@kernel.org
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC.
However the PMIC is not described in DTS at all so at least add a
workaround to model its clock with fixed-clock and silence dtbs_check
warnings like:
arch/arm/boot/dts/exynos4412-smdk4412.dt.yaml: rtc@10070000: clocks: [[7, 346]] is too short
arch/arm/boot/dts/exynos4412-smdk4412.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-31-krzk@kernel.org
Add missing cooling devices for CPU thermal zones in Exynos4412 Tiny4412
board. This allows to scale down CPU frequency (and voltage) in case of
thermal pressure.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-30-krzk@kernel.org
Add missing cooling devices for CPU thermal zones in Exynos4412 SMDK4412
board. This allows to scale down CPU frequency (and voltage) in case of
thermal pressure.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-29-krzk@kernel.org
Add missing cooling devices for CPU thermal zones in Exynos4412 Origen
board. This allows to scale down CPU frequency (and voltage) in case of
thermal pressure.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-28-krzk@kernel.org
Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired. This will lead to run-time errors
that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-27-krzk@kernel.org
Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired. This will lead to run-time errors
that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-26-krzk@kernel.org
Add node for clock controller of Samsung S5M8767 PMIC. This provides
the 32768 Hz clock required by S3C RTC. Except making the S3C RTC
working, this also fixes dtbs_check warnings:
arch/arm/boot/dts/exynos4412-origen.dt.yaml: rtc@10070000: clocks: [[7, 346]] is too short
arch/arm/boot/dts/exynos4412-origen.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-25-krzk@kernel.org
The fixed clocks implemented by Samsung clock drivers use only one
compatible so drop the additional "fixed-clock" to fix dtbs_check
warnings like:
arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: compatible:0: 'fixed-clock' was expected
From schema: Documentation/devicetree/bindings/clock/fixed-clock.yaml
arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: compatible: ['samsung,clock-xxti', 'fixed-clock'] is too long
arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: compatible: Additional items are not allowed ('fixed-clock' was unexpected)
arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: '#clock-cells' is a required property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-24-krzk@kernel.org
Align the name of mag-mhl-gpio node to avoid dtschema confusion and
dtbs_check warning:
arch/arm/boot/dts/exynos4210-i9100.dt.yaml: pinctrl@11000000: mag-mhl-gpio:
{'samsung,pins': ['gpd0-2'], 'samsung,pin-function': [[3]], 'samsung,pin-pud': [[0]]} is not of type 'array'
From schema: dtschema/schemas/gpio/gpio-consumer.yaml
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-22-krzk@kernel.org
Add missing cooling devices for CPU thermal zones in Exynos4210
Universal C310 board. This allows to scale down CPU frequency (and
voltage) in case of thermal pressure.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-21-krzk@kernel.org
Add missing cooling devices for CPU thermal zones in Exynos4210 SMDKv310
board. This allows to scale down CPU frequency (and voltage) in case of
thermal pressure.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-20-krzk@kernel.org
Add missing cooling devices for CPU thermal zones in Exynos4210 Origen
board. This allows to scale down CPU frequency (and voltage) in case of
thermal pressure.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-19-krzk@kernel.org
Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired. This will lead to run-time errors
that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-18-krzk@kernel.org
Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired. This will lead to run-time errors
that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-17-krzk@kernel.org
Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired. This will lead to run-time errors
that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-16-krzk@kernel.org
The device tree schema expects SPI controller to be named "spi",
otherwise dtbs_check complain with a warning like:
arch/arm/boot/dts/exynos4210-i9100.dt.yaml: spi-lcd:
$nodename:0: 'spi-lcd' does not match '^spi(@.*|-[0-9a-f])*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-15-krzk@kernel.org
"gpio-sck" and "gpio-mosi" are deprecated so update the DTS to fix
dtbs_checks warnings like:
arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: spi-lcd:
gpio-sck: False schema does not allow [[85, 1, 0]]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200830135200.24304-14-krzk@kernel.org
The device tree schema expects SPI controller to be named "spi",
otherwise dtbs_check complain with a warning like:
arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: spi-lcd:
$nodename:0: 'spi-lcd' does not match '^spi(@.*|-[0-9a-f])*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-13-krzk@kernel.org
The PMIC has a 32768 Hz clock used by the modem which is implemented by
driver as a regulator. Add and enable it to be sure modem get's its
signal.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-10-krzk@kernel.org
The PMIC has a 32768 Hz clock used by the modem which is implemented by
driver as a regulator. Add and enable it to be sure modem get's its
signal.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-8-krzk@kernel.org
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC.
However there is no clock provided for the PMIC and the driver registers
the clock as regulator. This is an old driver which will not be updated
so add a workaround - a fixed-clock to fill missing clock phandle
reference in S3C RTC.
This allows to enable the S3C RTC and fixes dtbs_check warnings:
arch/arm/boot/dts/exynos4210-smdkv310.dt.yaml: rtc@10070000: clocks: [[5, 346]] is too short
arch/arm/boot/dts/exynos4210-smdkv310.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-7-krzk@kernel.org
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC.
However there is no clock provided for the PMIC and the driver registers
the clock as regulator. This is an old driver which will not be updated
so add a workaround - add a fixed-clock to fill missing clock phandle
reference in S3C RTC. The "clock" regulator in PMIC is already present
and enabled.
This allows to enable the S3C RTC and fixes dtbs_check warnings:
arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: rtc@10070000: clocks: [[5, 346]] is too short
arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200830135200.24304-6-krzk@kernel.org
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC
(Maxim MAX8997). However there is no clock provided for the PMIC and
the driver registers the clock as regulator. This is an old driver
which will not be updated so add a workaround:
1. Enable the "clock" regulator in PMIC,
2. Add a fixed-clock to fill missing clock phandle reference in S3C RTC.
This allows to enable the S3C RTC and fixes dtbs_check warnings:
arch/arm/boot/dts/exynos4210-trats.dt.yaml: rtc@10070000: clocks: [[5, 346]] is too short
arch/arm/boot/dts/exynos4210-trats.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200830135200.24304-5-krzk@kernel.org
