mirror of
https://github.com/openhwgroup/cve2.git
synced 2025-04-24 22:17:39 -04:00
f2fccaadbc
- Fix incorrect address output to mepc on interrupt (fixes #320) - Fix instruction address changing before grant (fixes #296) - Suppress requests and reg writes on fetch error (fixes #340) - Remove excess address flops in fetch_fifo - Remove restriction on outstanding requests
51 lines
3.2 KiB
ReStructuredText
51 lines
3.2 KiB
ReStructuredText
.. _instruction-fetch:
|
|
|
|
Instruction Fetch
|
|
=================
|
|
|
|
The Instruction-Fetch (IF) stage of the core is able to supply one instruction to the Instruction-Decode (ID) stage per cycle if the instruction cache or the instruction memory is able to serve one instruction per cycle.
|
|
For optimal performance and timing closure reasons, a prefetcher is used which fetches instructions from the instruction memory, or instruction cache.
|
|
|
|
The following table describes the signals that are used to fetch instructions.
|
|
This interface is a simplified version of the interface used on the data interface as described in :ref:`load-store-unit`.
|
|
The main difference is that the instruction interface does not allow for write transactions and thus needs less signals.
|
|
|
|
.. tabularcolumns:: |p{4cm}|l|p{9cm}|
|
|
|
|
+-------------------------+-----------+-----------------------------------------------+
|
|
| Signal | Direction | Description |
|
|
+=========================+===========+===============================================+
|
|
| ``instr_req_o`` | output | Request valid, must stay high until |
|
|
| | | ``instr_gnt_i`` is high for one cycle |
|
|
+-------------------------+-----------+-----------------------------------------------+
|
|
| ``instr_addr_o[31:0]`` | output | Address, word aligned |
|
|
+-------------------------+-----------+-----------------------------------------------+
|
|
| ``instr_gnt_i`` | input | The other side accepted the request. |
|
|
| | | ``instr_req_o`` may be deasserted in the next |
|
|
| | | cycle. |
|
|
+-------------------------+-----------+-----------------------------------------------+
|
|
| ``instr_rvalid_i`` | input | ``instr_rdata_i`` holds valid data when |
|
|
| | | ``instr_rvalid_i`` is high. This signal will |
|
|
| | | be high for exactly one cycle per request. |
|
|
+-------------------------+-----------+-----------------------------------------------+
|
|
| ``instr_rdata_i[31:0]`` | input | Data read from memory |
|
|
+-------------------------+-----------+-----------------------------------------------+
|
|
| ``instr_err_i`` | input | Memory access error |
|
|
+-------------------------+-----------+-----------------------------------------------+
|
|
|
|
|
|
Misaligned Accesses
|
|
-------------------
|
|
|
|
Externally, the IF interface performs word-aligned instruction fetches only.
|
|
Misaligned instruction fetches are handled by performing two separate word-aligned instruction fetches.
|
|
Internally, the core can deal with both word- and half-word-aligned instruction addresses to support compressed instructions.
|
|
The LSB of the instruction address is ignored internally.
|
|
|
|
|
|
Protocol
|
|
--------
|
|
|
|
The protocol used to communicate with the instruction cache or the instruction memory is very similar to the protocol used by the LSU on the data interface of Ibex.
|
|
See the description of the LSU in :ref:`LSU Protocol<lsu-protocol>` for details about this protocol.
|
|
|