Added files to repo

.gitignore

@@ -21,6 +21,7 @@ wlft*
 /imperas-riscv-tests/logs
 *.o
 *.d
+*.vstf
 testsBP/*/*/*.elf*
 testsBP/*/OBJ/*
 testsBP/*/*.a

Makefile

@@ -1,31 +1,18 @@
-#make all: submodules other
-#make all: submodules other
-#submodules: addins/riscv-isa-sim addins/riscv-arch-test
-#	git pull --recurse-submodules
-#
-#other:
 make all:
 # move these parts into compiling archtest separtately
-	cp -r addins/riscv-isa-sim/arch_test_target/spike/device/rv32i_m/I addins/riscv-isa-sim/arch_test_target/spike/device/rv32i_m/F
-	cp -r addins/riscv-isa-sim/arch_test_target/spike/device/rv64i_m/I addins/riscv-isa-sim/arch_test_target/spike/device/rv64i_m/D
-<<<<<<< HEAD
-#why cat
-	cat addins/riscv-isa-sim/arch_test_target/spike/device/rv32i_m/F/Makefile.include
-=======
->>>>>>> 29f2a1c5479d7a80debdb1ac337fcda628cc57a3
-	sed -i 's/--isa=rv32i /--isa=32if/' addins/riscv-isa-sim/arch_test_target/spike/device/rv32i_m/F/Makefile.include
-	sed -i 's/--isa=rv64i /--isa=64if/' addins/riscv-isa-sim/arch_test_target/spike/device/rv64i_m/D/Makefile.include
-	if [ -d "addins/riscv-isa-sim/build" ]; then echo "Build exists"; else mkdir addins/riscv-isa-sim/build; fi
-	cd addins/riscv-isa-sim/build; ../configure --prefix=/cad/riscv/gcc/bin
-	make -C addins/riscv-isa-sim/build
-# does sudo work?
-
-	sudo make install -C addins/riscv-isa-sim/build
-
-	cp addins/riscv-isa-sim/arch_test_target/spike/Makefile.include addins/riscv-arch-test/
+#	cp -r addins/riscv-isa-sim/arch_test_target/spike/device/rv32i_m/I addins/riscv-isa-sim/arch_test_target/spike/device/rv32i_m/F
+#	cp -r addins/riscv-isa-sim/arch_test_target/spike/device/rv64i_m/I addins/riscv-isa-sim/arch_test_target/spike/device/rv64i_m/D
+#	sed -i 's/--isa=rv32i /--isa=32if/' addins/riscv-isa-sim/arch_test_target/spike/device/rv32i_m/F/Makefile.include
+#	sed -i 's/--isa=rv64i /--isa=64id/' addins/riscv-isa-sim/arch_test_target/spike/device/rv64i_m/D/Makefile.include
+#	if [ -d "addins/riscv-isa-sim/build" ]; then echo "Build exists"; else mkdir addins/riscv-isa-sim/build; fi
+#	cd addins/riscv-isa-sim/build; ../configure --prefix=/cad/riscv/gcc/bin
+#	make -C addins/riscv-isa-sim/build
+#	sudo make install -C addins/riscv-isa-sim/build
+#	cp addins/riscv-isa-sim/arch_test_target/spike/Makefile.include addins/riscv-arch-test/
 # update with path including $RISCV_TOOLS
 # separate into make tests and make regression
-	sed -i '/export TARGETDIR ?=/c\export TARGETDIR ?= /home/harris/riscv-wally/addins/riscv-isa-sim/arch_test_target' tests/wally-riscv-arch-test/Makefile.include
+    cp $RISCV/riscv-isa-sim/arch_test_target/spike/Makefile.include addins/riscv-arch-test/
+	sed -i '/export TARGETDIR ?=/c\export TARGETDIR ?= $RISCV/riscv-isa-sim/arch_test_target' tests/wally-riscv-arch-test/Makefile.include
 	echo export RISCV_PREFIX = riscv64-unknown-elf- >> tests/wally-riscv-arch-test/Makefile.include
 	make -C addins/riscv-arch-test
 	make -C addins/riscv-arch-test XLEN=32

wally-pipelined/README.txt

@@ -0,0 +1,50 @@
+Code Improvements
+David_Harris@hmc.edu 15 Nov 2021
+
+Remove depricated N-Mode stuff, including sd in privileged.sv
+Look at version 13? of privileged spec.  What should we add?
+Reduce size of repo
+
+Timing optimization (Kip, Shreya)
+    Use ForwardSrcA instead of SrcA for mdu / fpu
+    Look at TLB -> PMP -> Access Fault -> Trap
+        may be able to precompute
+    Try flattening, see speedup
+    Take out Mul synthesis modes
+
+RISCV-Arch-tests 
+    Port MMU tests
+
+FPU
+    spec difference on signaling/quiet NAN propagation
+    SRT Div/Sqrt (Katherine, maybe Udeema)
+    Get riscv-arch-tests running (James, Katherine)
+    Get testfloat all passing
+    Katherine's FPU optimization
+
+Linux Boot
+    Ben, Skyler
+
+FPGA Boot Linux (Ross)
+
+IFU/LSU
+    Block diagrams, code cleanup
+    Burst mode transfers to speed up IPC
+    Implications of no byte enables on subword write - do stores take extra cycle, should this be avoided?
+
+28 nm Implementation
+    Install processor  
+    Memory macros
+    Synthesis & PNR
+    Timing review
+
+Benchmarking
+
+Flow
+    Kevin Kim has a makefile to check out and build all the pieces.  Make sure this is running; change Repo README to use his makefile
+
+Code cleanup    
+    .* fixes by thanksgiving
+    Rename top-level modules to abbreviations
+    Rename muldiv to mdu
+    Get rid of DESIGN_COMPILER flag and redundant multiplier

wally-pipelined/linux-testgen/linux-testvectors/all.txt

@@ -0,0 +1 @@
+/courses/e190ax/buildroot_boot/all.txt

wally-pipelined/linux-testgen/linux-testvectors/bootmem.txt

@@ -0,0 +1 @@
+/courses/e190ax/buildroot_boot/bootmem.txt

wally-pipelined/linux-testgen/linux-testvectors/checkpoint8500000

@@ -0,0 +1 @@
+/courses/e190ax/buildroot_boot/checkpoint8500000

wally-pipelined/linux-testgen/linux-testvectors/ram.txt

@@ -0,0 +1 @@
+/courses/e190ax/buildroot_boot/ram.txt

wally-pipelined/linux-testgen/linux-testvectors/vmlinux.objdump

@@ -0,0 +1 @@
+/courses/e190ax/buildroot_boot/vmlinux.objdump

wally-pipelined/linux-testgen/linux-testvectors/vmlinux.objdump.addr

@@ -0,0 +1 @@
+/courses/e190ax/buildroot_boot/vmlinux.objdump.addr

wally-pipelined/linux-testgen/linux-testvectors/vmlinux.objdump.lab

@@ -0,0 +1 @@
+/courses/e190ax/buildroot_boot/vmlinux.objdump.lab

wally-setup.sh

@@ -0,0 +1,26 @@
+#!/bin/bash
+
+# wally-setup.sh
+# David_Harris@hmc.edu and kekim@hmc.edu 1 December 2021
+# Set up tools for riscv-wally
+
+echo "Executing wally-setup.sh"
+
+# Path to RISC-V Tools
+export RISCV=/opt/riscv   # change this if you installed the tools in a different location
+
+# Tools
+export PATH=$RISCV/riscv-gnu-toolchain/bin:$RISCV/riscv-gnu-toolchain/riscv64-unknown-elf/bin:$PATH       # GCC tools
+export PATH=~/riscv-wally/bin:$PATH    # exe2memfile; change this if riscv-wally isn't at your home directory
+export PATH=/cad/mentor/questa_sim-2021.2_1/questasim/bin:$PATH    # Change this for your path to Modelsim
+export PATH=/usr/local/bin/verilator:$PATH # Change this for your path to Verilator
+export LD_LIBRARY_PATH=$RISCV/riscv-gnu-toolchain/lib:$RISCV/riscv-gnu-toolchain/riscv64-unknown-elf/lib:$LD_LIBRARY_PATH
+
+export MGLS_LICENSE_FILE=1717@solidworks.eng.hmc.edu # *** is this the right license server now
+
+# Imperas; *** remove if not using
+PATH=/cad/riscv/imperas-riscv-tests/riscv-ovpsim-plus/bin/Linux64:/cad/riscv/imperas-riscv-tests/riscv-ovpsim/bin/Liux64:$PATH  # *** maybe take this out based on Imperas
+export LD_LIBRARY_PATH=/cad/imperas/Imperas.20200630/bin/Linux64:$LD_LIBRARY_PATH # remove if no imperas
+IMPERAS_HOME=/cad/imperas/Imperas.20200630
+source $IMPERAS_HOME/bin/setup.sh
+setupImperas $IMPERAS_HOME