This coverpoint does not make sense. The hardware breakpoint is
triggered as the instruction moves into the ID/EX stage so it never has
a chance to take an exception (it effectively never begins executing).
This commit protects the core_busy_o signal using a multi-bit encoding
to reduce the chances of an adversary for glitching this signal to low,
thereby putting the core to sleep and e.g. not handling an alert.
Without this commit, the glitch would only be detected once both the
main core and the shadow core wake up again and the comparison of the
core_busy_o signals continues.
This resolveslowRISC/Ibex#1827.
Signed-off-by: Pirmin Vogel <vogelpi@lowrisc.org>
Previously `fetch_enable_i` only controlled the request going into the
instruction fetch stage. Due to buffering in the prefetch queue and
icache when this request is dropped it's possible for multiple
instructions to still be available for the ID/EX stage to consume. So
when `fetch_enable_i` was set to off you would get a 'soft stop'. Some
finite number of instructions may still execute and Ibex would come to
an eventual halt.
Now `fetch_enable_i` also gates the instruction moving between the fetch
stage and the ID/EX stage. This gives a 'hard stop' where once fetch is
disabled Ibex comes to an immediate halt.
Previously Ibex signalled a major alert on an integrity error (where
incoming read data doesn't match its integrity bits) for both read and
write responses. This was removed as the data part of a response to a
write is ignored.
This brings it back in a more measured way. This provides a little extra
fault injection hardening as an attacker glitching the memory bus will
generate an alert on both read and write responses.
The ic_scr_key_valid field indicates whether the ICache scrambling key
is valid.
CPUCTRL is also renamed CPUCTRLSTS as it contains both control and
status bits.
Adds some signal to the load store unit to catch when we have the
fetch error signals from both first and second part of the misaligned
load/store access cases.
Signed-off-by: Canberk Topal <ctopal@lowrisc.org>
Includes coverpoints for:
- Hardware trigger point matches
- Debug simple step entrance in controller
- Seeing different insns while single stepping
Also updates on coverage plan to fill up missing mentions of
coverpoints/crosses
Signed-off-by: Canberk Topal <ctopal@lowrisc.org>
This works with versions ibex-cosim-v0.2 and ibex-cosim-v0.3. The latter
version is required to support the mseccfg CSR added with ePMP.
Signed-off-by: Pirmin Vogel <vogelpi@lowrisc.org>
An internal interrupt triggers an NMI. A single one is implemented, one
on integrity errors being seen in load data. This replaces a synchronous
exception on an integrity error which caused timing issues.
Added coverpoint and cross names to relevant plan entries so plan is up
to date with implemented coverage. Also some minor changes to remove
plan entries that are no longer required.
When the icache is enabled and data independent timing is required
variable fetch latency due to cache hit or miss may introduce
undesirable timing behaviour. This adds explicit mention of this to the
documentation.
We're going to want to make a couple more releases of Spike, cleaving
a bit closer to the upstream repository. Let's be explicit about which
version people should get.
This is to allow more consistent signalling in systems that integrate
Ibex (e.g. OpenTitan) so bus integrity errors external to Ibex and one's
detected within Ibex can be fed into the same alert whilst seperating
out Ibex's various internal alert causes.
We can now point at a single version of Spike (the "ibex_cosim"
branch, until we've managed to upstream things properly). And ditch
the OVPsim stuff: that's not going to be supported again any time
soon.
This commit includes switching to a scrambling RAM primitive for
ICache data and tag RAMs. Also introduces minor changes to ICache
to handle scrambling key valid signal.
It also includes a minor bug fix regarding not initializing
`fill_way_q` signal without ResetAll parameter. When the parameter
is not set and we have our first hit right after ICache enables,
the signal hangs.
Signed-off-by: Canberk Topal <ctopal@lowrisc.org>
This invovles the following changes:
- Rename pcnt to cpop
- Switch encoding of max and minu
- Remove rev from Balanced version, only available in Full version via
grev (Zbp)
- Include sext.b/h (previously in Zb_tmp)
- Remove slo[i] and sro[i] from Balanced version, only available in Full
version (Zbp)
Signed-off-by: Pirmin Vogel <vogelpi@lowrisc.org>
This change is related to the bitmanip draft version 0.94. It's needed
as in draft version 0.93 as well as in version 1.00 sbext from Zbs
changes to bext, leading to two completely different instructions having
the same name.
Signed-off-by: Pirmin Vogel <vogelpi@lowrisc.org>
